- 14 Oct, 2009 1 commit
-
-
Logan Li authored
48 kHz limit is for slightly better stability, and sample rates other than 48k (like 96k/192k) are for better sound quality. We choose better quality, so remove the 48k limit. Signed-off-by:
Logan Li <loganli@viatech.com.cn> Signed-off-by:
Takashi Iwai <tiwai@suse.de>
-
- 12 Oct, 2009 1 commit
-
-
Stephen Rothwell authored
Fixes: sound/pci/hda/patch_via.c: In function 'patch_vt1718S': sound/pci/hda/patch_via.c:4951: error: expected expression before 'return' sound/pci/hda/patch_via.c: In function 'patch_vt1716S': sound/pci/hda/patch_via.c:5441: error: expected expression before 'return' sound/pci/hda/patch_via.c: In function 'patch_vt2002P': sound/pci/hda/patch_via.c:5794: error: expected expression before 'return' sound/pci/hda/patch_via.c: In function 'patch_vt1812': sound/pci/hda/patch_via.c:6148: error: expected expression before 'return' Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
- 11 Oct, 2009 30 commits
-
-
Lydia Wang authored
Signed-off-by:
Lydia Wang <lydiawang@viatech.com.cn> Signed-off-by:
-
Lydia Wang authored
Signed-off-by:
-
Lydia Wang authored
According to customer request, hp should be default to redirected mode, i.e. PW4 connect select default to to MW0. Signed-off-by:
-
Lydia Wang authored
To via_control_templates[]. Signed-off-by:
-
Lydia Wang authored
Signed-off-by:
-
Lydia Wang authored
Signed-off-by:
-
Lydia Wang authored
Signed-off-by:
-
Lydia Wang authored
Signed-off-by:
-
Lydia Wang authored
Signed-off-by:
-
Lydia Wang authored
As init verbs, vt17xx_volume_init_verb is a better place to hold them. Signed-off-by:
-
Lydia Wang authored
With snd_hda_override_amp_caps. Signed-off-by:
-
Lydia Wang authored
Rewrite nid_vol/mute assignment for clearity, and check line connection before adding control for it. Signed-off-by:
-
Lydia Wang authored
Rewrite nid_vol/mute assignment for clearity, and check line connection before adding control for it. Signed-off-by:
-
Lydia Wang authored
Replaced with via_playback_multi_pcm_prepare/cleanup to support multi-stream operations Signed-off-by:
-
Lydia Wang authored
like seqassoc 0xff, seqassoc 0xf0 of vt1708 should override Port Connectivity field into 'AC_JACK_PORT_COMPLEX' Signed-off-by:
-
Lydia Wang authored
VT1708 does not support unsolicited response, but we need hp detect to automute speaker. Implemented in workqueue. Signed-off-by:
-
Lydia Wang authored
Signed-off-by:
-
Lydia Wang authored
Signed-off-by:
-
Lydia Wang authored
Signed-off-by:
-
Lydia Wang authored
Smart 5.1 is for 3-jacks model, to reuse input pins as outputs. While off, they act as "line out" / "line in" / "mic in". While on, they acts as "line out" / "back left/right" / "center/lfe". Signed-off-by:
-
Lydia Wang authored
Use hp_independent_mode_index to store hp index, and simplify function via_independent_hp_put with it. Signed-off-by:
-
Lydia Wang authored
For VT1708S and VT1702, deactivate "Headphone Playback Volume" and "Headphone Playback Mute" control if "Independent HP" mode is OFF. and rename VT1702 "Independent HP" text. Signed-off-by:
-
Lydia Wang authored
Signed-off-by:
-
Lydia Wang authored
For VT1708B, VT1708S and VT1702, enter low current mode if no analog stream is opened and all aa path mute. Signed-off-by:
-
Lydia Wang authored
Enter low power state if AA-Path volume is muted. Signed-off-by:
-
Lydia Wang authored
according to customer request, VT1702 AA-Path max volume (12 dB) is too high, so limit to 0 dB. Signed-off-by:
-
Lydia Wang authored
Signed-off-by:
-
Lydia Wang authored
Signed-off-by:
-
Lydia Wang authored
IS_VT17*_VENDORID macros are used nowhere, so clean them up. Signed-off-by:
-
Takashi Iwai authored
-
- 09 Oct, 2009 1 commit
-
-
Takashi Iwai authored
Allow Nvidia HDMI to support more possible sample rates and formats. At best, the really supported rates and formats should be determined together with the negotiation with the HDMI receiver, but it's currently not implemented yet (Nvidia stuff seems incompatible with HDMI 1.3 standard in this regard). As a compromise, we enable all bits, assuming that all recent devices do support such rates/formats. Tested-by:
Alan Alan <alanwww1@gmail.com> Signed-off-by:
-
- 07 Oct, 2009 1 commit
-
-
Takashi Iwai authored
Since patch_alc268() doesn't call set_capture_mixer() (due to its h/w design different from other siblings), it needs to call fixup_automic_adc() explicitly to set up the auto-mic routing. Otherwise the indices for int/ext mics aren't set properly. Reference: Novell bnc#544899 http://bugzilla.novell.com/show_bug.cgi?id=544899Signed-off-by:
-
- 06 Oct, 2009 2 commits
-
-
Takashi Iwai authored
alc_subsystem_id() tries to pick up a headphone pin if not configured, but this caused side-effects as the problem in commit 15870f05. This patch fixes the driver behavior to pick up invalid HP pins; at least, the pins that are listed as the primary outputs aren't taken any more. Signed-off-by:
-
Takashi Iwai authored
ASUS A7K needs additional GPIO1 bit setup; it has to be cleared. Added a new fixup hook for this laptop so that it works as is. Refernece: Novell bnc#494309 http://bugzilla.novell.com/show_bug.cgi?id=494309Signed-off-by:
-
- 05 Oct, 2009 1 commit
-
-
Takashi Iwai authored
The recent auto-parser doesn't work for machines with a single output with ALC861, such as Toshiba laptops, because alc_subsystem_id() sets the hp_pins[0] while it's listed in line_outs[0]. This ends up with the doubled initialization of the same mixer widget, and it mutes the DAC route because hp_pins has no DAC assigned. To fix this problem, just check spec->autocfg.hp_outs and speaker_outs so that they are really detected pins. Reference: Novell bnc#544161 http://bugzilla.novell.com/show_bug.cgi?id=544161Signed-off-by:
-
- 02 Oct, 2009 3 commits
-
-
Takashi Iwai authored
Use a common helper to create playback controls. This gives less chance of typos. Signed-off-by: -
Takashi Iwai authored
-
Takashi Iwai authored
The auto-parser for ALC662/663/272 codecs doesn't work properly when a speaker is connected to mono NID 0x17, and doesn't handle the dynamic DAC assignment properly. This patch fixes the issues and also improves the assignment of DACs so that HP and speakers can have independent volume controls. Signed-off-by:
-
