If addBA responses comes in just after addba_resp_timer has
expired mac80211 will still accept it and try to open the
aggregation session. This causes drivers to be confused and
in some cases even crash.

This patch fixes the race condition and makes sure that if
addba_resp_timer has expired addBA response is not longer
accepted and we do not try to open half-closed session.

Cc: stable@vger.kernel.org
Signed-off-by: Nikolay Martynov <mar.kolya@gmail.com>
[some adjustments]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

Revert a hunk in drivers/net/wireless/ath/ath9k/hw.c introduced by
commit 2577c6e8 (ath9k_hw: Add
support for AR946/8x chipsets) that caused a nasty regression to
appear on my Acer Ferrari One (the box locks up entirely at random
times after the wireless has been started without any way to get
debug information out of it).
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

rtl_lps_leave can be called from interrupt context, so we have to
disable interrupts when taking lps_lock.

Below is full lockdep info about deadlock:

[   93.815269] =================================
[   93.815390] [ INFO: inconsistent lock state ]
[   93.815472] 2.6.41.1-3.offch.fc15.x86_64.debug #1
[   93.815556] ---------------------------------
[   93.815635] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
[   93.815743] swapper/0 [HC0[0]:SC1[1]:HE1:SE0] takes:
[   93.815832]  (&(&rtlpriv->locks.lps_lock)->rlock){+.?...}, at: [<ffffffffa025dad6>] rtl_lps_leave+0x26/0x103 [rtlwifi]
[   93.815947] {SOFTIRQ-ON-W} state was registered at:
[   93.815947]   [<ffffffff8108e10d>] __lock_acquire+0x369/0xd0c
[   93.815947]   [<ffffffff8108efb3>] lock_acquire+0xf3/0x13e
[   93.815947]   [<ffffffff814e981d>] _raw_spin_lock+0x45/0x79
[   93.815947]   [<ffffffffa025de34>] rtl_swlps_rf_awake+0x5a/0x76 [rtlwifi]
[   93.815947]   [<ffffffffa025aec0>] rtl_op_config+0x12a/0x32a [rtlwifi]
[   93.815947]   [<ffffffffa01d614b>] ieee80211_hw_config+0x124/0x129 [mac80211]
[   93.815947]   [<ffffffffa01e0af3>] ieee80211_dynamic_ps_disable_work+0x32/0x47 [mac80211]
[   93.815947]   [<ffffffff81075aa5>] process_one_work+0x205/0x3e7
[   93.815947]   [<ffffffff81076753>] worker_thread+0xda/0x15d
[   93.815947]   [<ffffffff8107a119>] kthread+0xa8/0xb0
[   93.815947]   [<ffffffff814f3184>] kernel_thread_helper+0x4/0x10
[   93.815947] irq event stamp: 547822
[   93.815947] hardirqs last  enabled at (547822): [<ffffffff814ea1a7>] _raw_spin_unlock_irqrestore+0x45/0x61
[   93.815947] hardirqs last disabled at (547821): [<ffffffff814e9987>] _raw_spin_lock_irqsave+0x22/0x8e
[   93.815947] softirqs last  enabled at (547790): [<ffffffff810623ed>] _local_bh_enable+0x13/0x15
[   93.815947] softirqs last disabled at (547791): [<ffffffff814f327c>] call_softirq+0x1c/0x30
[   93.815947]
[   93.815947] other info that might help us debug this:
[   93.815947]  Possible unsafe locking scenario:
[   93.815947]
[   93.815947]        CPU0
[   93.815947]        ----
[   93.815947]   lock(&(&rtlpriv->locks.lps_lock)->rlock);
[   93.815947]   <Interrupt>
[   93.815947]     lock(&(&rtlpriv->locks.lps_lock)->rlock);
[   93.815947]
[   93.815947]  *** DEADLOCK ***
[   93.815947]
[   93.815947] no locks held by swapper/0.
[   93.815947]
[   93.815947] stack backtrace:
[   93.815947] Pid: 0, comm: swapper Not tainted 2.6.41.1-3.offch.fc15.x86_64.debug #1
[   93.815947] Call Trace:
[   93.815947]  <IRQ>  [<ffffffff814dfd00>] print_usage_bug+0x1e7/0x1f8
[   93.815947]  [<ffffffff8101a849>] ? save_stack_trace+0x2c/0x49
[   93.815947]  [<ffffffff8108d55c>] ? print_irq_inversion_bug.part.18+0x1a0/0x1a0
[   93.815947]  [<ffffffff8108dc8a>] mark_lock+0x106/0x220
[   93.815947]  [<ffffffff8108e099>] __lock_acquire+0x2f5/0xd0c
[   93.815947]  [<ffffffff810152af>] ? native_sched_clock+0x34/0x36
[   93.830125]  [<ffffffff810152ba>] ? sched_clock+0x9/0xd
[   93.830125]  [<ffffffff81080181>] ? sched_clock_local+0x12/0x75
[   93.830125]  [<ffffffffa025dad6>] ? rtl_lps_leave+0x26/0x103 [rtlwifi]
[   93.830125]  [<ffffffff8108efb3>] lock_acquire+0xf3/0x13e
[   93.830125]  [<ffffffffa025dad6>] ? rtl_lps_leave+0x26/0x103 [rtlwifi]
[   93.830125]  [<ffffffff814e981d>] _raw_spin_lock+0x45/0x79
[   93.830125]  [<ffffffffa025dad6>] ? rtl_lps_leave+0x26/0x103 [rtlwifi]
[   93.830125]  [<ffffffff81422467>] ? skb_dequeue+0x62/0x6d
[   93.830125]  [<ffffffffa025dad6>] rtl_lps_leave+0x26/0x103 [rtlwifi]
[   93.830125]  [<ffffffffa025f677>] _rtl_pci_ips_leave_tasklet+0xe/0x10 [rtlwifi]
[   93.830125]  [<ffffffff8106281f>] tasklet_action+0x8d/0xee
[   93.830125]  [<ffffffff810629ce>] __do_softirq+0x112/0x25a
[   93.830125]  [<ffffffff814f327c>] call_softirq+0x1c/0x30
[   93.830125]  [<ffffffff81010bf6>] do_softirq+0x4b/0xa1
[   93.830125]  [<ffffffff81062d7d>] irq_exit+0x5d/0xcf
[   93.830125]  [<ffffffff814f3b7e>] do_IRQ+0x8e/0xa5
[   93.830125]  [<ffffffff814ea533>] common_interrupt+0x73/0x73
[   93.830125]  <EOI>  [<ffffffff8108b825>] ? trace_hardirqs_off+0xd/0xf
[   93.830125]  [<ffffffff812bb6d5>] ? intel_idle+0xe5/0x10c
[   93.830125]  [<ffffffff812bb6d1>] ? intel_idle+0xe1/0x10c
[   93.830125]  [<ffffffff813f8d5e>] cpuidle_idle_call+0x11c/0x1fe
[   93.830125]  [<ffffffff8100e2ef>] cpu_idle+0xab/0x101
[   93.830125]  [<ffffffff814c6373>] rest_init+0xd7/0xde
[   93.830125]  [<ffffffff814c629c>] ? csum_partial_copy_generic+0x16c/0x16c
[   93.830125]  [<ffffffff81d4bbb0>] start_kernel+0x3dd/0x3ea
[   93.830125]  [<ffffffff81d4b2c4>] x86_64_start_reservations+0xaf/0xb3
[   93.830125]  [<ffffffff81d4b140>] ? early_idt_handlers+0x140/0x140
[   93.830125]  [<ffffffff81d4b3ca>] x86_64_start_kernel+0x102/0x111

Resolves:
https://bugzilla.redhat.com/show_bug.cgi?id=755154

Reported-by: vjain02@students.poly.edu
Reported-and-tested-by: Oliver Paukstadt <pstadt@sourcentral.org>
Cc: stable@vger.kernel.org
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

Nikolay noticed (by code review) that mac80211 can
attempt to stop an aggregation session while it is
already being stopped. So to fix it, check whether
stop is already being done and bail out if so.

Also move setting the STOPPING state into the lock
so things are properly atomic.

Cc: stable@vger.kernel.org
Reported-by: Nikolay Martynov <mar.kolya@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

MAC addresses have a fixed length. The current
policy allows passing < ETH_ALEN bytes, which
might result in reading beyond the buffer.

Cc: stable@vger.kernel.org
Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

This reverts commit 4ba7d999.

The original patch was a misguided attempt to improve performance on
some hardware that is apparently prone to spurious interrupt generation.
Signed-off-by: John W. Linville <linville@tuxdriver.com>

This reverts commit 23085d57.

The original patch was a misguided attempt to improve performance on
some hardware that is apparently prone to spurious interrupt generation.
Signed-off-by: John W. Linville <linville@tuxdriver.com>

"dwrq->length" is the capped version of "essid->length".
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

By the time userspace returns with a response to
the regulatory domain request, the wiphy causing
the request might have gone away. If this is so,
reject the update but mark the request as having
been processed anyway.

Cc: Luis R. Rodriguez <lrodriguez@qca.qualcomm.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: John W. Linville <linville@tuxdriver.com>

I intoduced this bug in commit a2fe8166
"mac80211: Build TX radiotap header dynamically"
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

It was flipped.  See section 7.3.2.56 of the 802.11n
spec for details.
Signed-off-by: Ben Greear <greearb@candelatech.com>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

priv->work must not be synced while priv->mutex is locked, because
the mutex is taken in the work handler.
Move cancel_work_sync down to after the device shutdown code.
This is safe, because the work handler checks fw_state and bails out
early in case of a race.
Signed-off-by: Michael Buesch <m@bues.ch>
Cc: <stable@vger.kernel.org>
Acked-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

The tx_lock is not initialized properly. Add spin_lock_init().
Signed-off-by: Michael Buesch <m@bues.ch>
Cc: <stable@vger.kernel.org>
Acked-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

Fix __le32 to __le16 conversion of the first word of an 8-word block
of EEPROM read via the efuse method.
Reported-and-tested-by: Ingvar Hagelund <ingvar@redpill-linpro.com>
Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com>
CC: <stable@vger.kernel.org>
Acked-by: Helmut Schaa <helmut.schaa@googlemail.com>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

We have documented case of very bad performance issue on rt2800pci
device, because it generate spurious interrupt, what cause irq line
is disabled: https://bugzilla.redhat.com/show_bug.cgi?id=658451

We already address that problem in separate patch by returning
IRQ_HANDLED from interrupt handler. We think similar fix is needed for
other rt2x00 PCI devices, because users report performance problems on
these devices too.

Cc: stable@vger.kernel.org
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

Some devices may generate spurious interrupts, we have to handle them
otherwise interrupt line will be disabled with below message and driver
will not work:

[ 2052.114334] irq 17: nobody cared (try booting with the "irqpoll" option)
[ 2052.114339] Pid: 0, comm: swapper Tainted: P           2.6.35.6-48.fc14.x86_64 #1
[ 2052.114341] Call Trace:
[ 2052.114342]  <IRQ>  [<ffffffff810a6e2b>] __report_bad_irq.clone.1+0x3d/0x8b
[ 2052.114349]  [<ffffffff810a6f93>] note_interrupt+0x11a/0x17f
[ 2052.114352]  [<ffffffff810a7a73>] handle_fasteoi_irq+0xa8/0xce
[ 2052.114355]  [<ffffffff8100c2ea>] handle_irq+0x88/0x90
[ 2052.114357]  [<ffffffff8146f034>] do_IRQ+0x5c/0xb4
[ 2052.114360]  [<ffffffff81469593>] ret_from_intr+0x0/0x11
[ 2052.114361]  <EOI>  [<ffffffff8102b7f9>] ? native_safe_halt+0xb/0xd
[ 2052.114366]  [<ffffffff81010f03>] ? need_resched+0x23/0x2d
[ 2052.114367]  [<ffffffff8101102a>] default_idle+0x34/0x4f
[ 2052.114370]  [<ffffffff81008325>] cpu_idle+0xaa/0xcc
[ 2052.114373]  [<ffffffff81461f2a>] start_secondary+0x24d/0x28e
[ 2052.114374] handlers:
[ 2052.114375] [<ffffffff81332944>] (usb_hcd_irq+0x0/0x7c)
[ 2052.114378] [<ffffffffa00697da>] (rt2800pci_interrupt+0x0/0x18d [rt2800pci])
[ 2052.114384] Disabling IRQ #17

Resolve:
https://bugzilla.redhat.com/show_bug.cgi?id=658451Reported-and-tested-by: Amir Hedayaty <hedayaty@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

If we hit the default case in the switch in if_spi_host_to_card() we'll leak
the memory we allocated for 'packet'. This patch resolves the leak by freeing
the allocated memory in that case.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Acked-by: Dan Williams <dcbw@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: John W. Linville <linville@tuxdriver.com>

The generic powersaving code that determines after reception of a frame
whether the device should go back to sleep or whether is could stay
awake was calling rt2x00lib_config directly from RX tasklet context.
On a number of the devices this call can actually sleep, due to having
to confirm that the sleeping commands have been executed successfully.

Fix this by moving the call to rt2x00lib_config to a workqueue call.

This fixes bug https://bugzilla.redhat.com/show_bug.cgi?id=731672Tested-by: Tomas Trnka <tomastrnka@gmx.com>
Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com>
Cc: <stable@vger.kernel.org>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

This is reported to be an RT3070 based device.
Reported-by: Teika Kazura <teika@lavabit.com>
Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

Firmware expects 'max_ssid_length' field in
'struct mwifiex_ie_types_wildcard_ssid_params' to be '0' for
performing SSID specific scan. Currently driver updates it with
an actual SSID length. Hence UUT is not able to find the AP
configured in hidden SSID mode in scan results and association
fails.

max_ssid_length is filled with '0' to fix the issue.
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

When HW RF kill switch is set to kill the radio, our NIC issues an
interrupt after we stop the APM module. When we unload the module,
the driver disables and cleans the interrupts before stopping the
APM. So we have a real interrupt (inta not zero) pending.
When this interrupts pops up the tasklet has already been killed
and we crash.

Here is a logical description of the flow:

disable and clean interrupts
synchronize interrupts
kill the tasklet

stop the APM <<== creates an RF kill interrupt

free_irq <<== somehow our ISR is called here and we crash

Here is the panic message:

[  201.313636] BUG: unable to handle kernel paging request at ffff8800911b7150
[  201.314541] IP: [<ffffffff8106d652>] tasklet_action+0x62/0x130
[  201.315149] PGD 1c06063 PUD db37f067 PMD db408067 PTE 80000000911b7160
[  201.316456] Oops: 0000 [#1] SMP DEBUG_PAGEALLOC
[  201.317324] CPU 1
[  201.317495] Modules linked in: arc4 iwlwifi(-) mac80211 cfg80211 netconsole configfs binfmt_misc i915 drm_kms_helper drm uvcvideo i2c_algo_bit videodev dell_laptop dcdbas intel_agp dell_wmi intel_ips psmouse intel_gtt v4l2_compat_ioctl32 asix usbnet mii serio_raw video sparse_keymap firewire_ohci sdhci_pci sdhci firewire_core e1000e crc_itu_t [last unloaded: configfs]
[  201.323839]
[  201.324015] Pid: 2061, comm: modprobe Not tainted 3.1.0-rc9-wl #4 Dell Inc. Latitude E6410/0667CC
[  201.324736] RIP: 0010:[<ffffffff8106d652>]  [<ffffffff8106d652>] tasklet_action+0x62/0x130
[  201.325128] RSP: 0018:ffff88011bc43ea0  EFLAGS: 00010286
[  201.325338] RAX: ffff88008ae70000 RBX: ffff8800911b7150 RCX: ffff88008ae70028
[  201.325555] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88008ae70000
[  201.325775] RBP: ffff88011bc43ec0 R08: 0000000000000000 R09: 0000000000000000
[  201.325994] R10: 0000000000000002 R11: 0000000000000001 R12: 0000000000000001
[  201.326212] R13: 0000000000000006 R14: 0000000000000100 R15: ffff88008e259fd8
[  201.326431] FS:  00007f4b90ea9700(0000) GS:ffff88011bc40000(0000) knlGS:0000000000000000
[  201.326657] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[  201.326864] CR2: ffff8800911b7150 CR3: 000000008fd6d000 CR4: 00000000000006e0
[  201.327083] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  201.327302] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[  201.327521] Process modprobe (pid: 2061, threadinfo ffff88008e258000, task ffff88008ae70000)
[  201.327747] Stack:
[  201.330494]  0000000000000046 0000000000000030 0000000000000001 0000000000000006
[  201.333870]  ffff88011bc43f30 ffffffff8106cd8a ffffffff811e1016 ffff88011bc43f08
[  201.337186]  0000000100000046 ffff88008e259fd8 0000000a10be2160 0000000000000006
[  201.340458] Call Trace:
[  201.342994]  <IRQ>
[  201.345656]  [<ffffffff8106cd8a>] __do_softirq+0xca/0x250
[  201.348185]  [<ffffffff811e1016>] ? pde_put+0x76/0x90
[  201.350730]  [<ffffffff8131aeae>] ? do_raw_spin_unlock+0x5e/0xb0
[  201.353261]  [<ffffffff811e1016>] ? pde_put+0x76/0x90
[  201.355776]  [<ffffffff8163ccfc>] call_softirq+0x1c/0x30
[  201.358287]  [<ffffffff8101531d>] do_softirq+0x9d/0xd0
[  201.360823]  [<ffffffff8106cb05>] irq_exit+0xd5/0xf0
[  201.363330]  [<ffffffff8163d5d6>] do_IRQ+0x66/0xe0
[  201.365819]  [<ffffffff81632673>] common_interrupt+0x73/0x73
[  201.368257]  <EOI>

Cc: <stable@kernel.org> 3.1+
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

When the connection monitor timer fires right before
suspend, the following will happen:
 timer fires -> monitor_work gets queued
 suspend calls ieee80211_sta_quiesce
 ieee80211_sta_quiesce:
  - deletes timer
  - cancels monitor_work synchronously, running it
  [note wrong order of these steps]
 monitor_work runs, re-arming the timer
 later, timer fires while system should be quiesced

This causes a warning:

WARNING: at net/mac80211/util.c:540 ieee80211_can_queue_work+0x35/0x40 [mac80211]()

but is otherwise harmless. I'm not completely sure
this is the scenario Thomas stumbled across, but it
is the only way I can right now see the warning in
a scenario like the one he reported.
Reported-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

use get_unaligned_le64() to get timestamp
Signed-off-by: Steven Miao <realmz6@gmail.com>
Acked-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

Commit 4d9d88d1 by Scott James Remnant <keybuk@google.com> added
the .uevent() callback for the regulatory device used during
the platform device registration. The change was done to account
for queuing up udev change requests through udevadm triggers.
The change also meant that upon regulatory core exit we will now
send a uevent() but the uevent() callback, reg_device_uevent(),
also accessed last_request. Right before commiting device suicide
we free'd last_request but never set it to NULL so
platform_device_unregister() would lead to bogus kernel paging
request. Fix this and also simply supress uevents right before
we commit suicide as they are pointless.

This fix is required for kernels >= v2.6.39

$ git describe --contains 4d9d88d1
v2.6.39-rc1~468^2~25^2^2~21

The impact of not having this present is that a bogus paging
access may occur (only read) upon cfg80211 unload time. You
may also get this BUG complaint below. Although Johannes
could not reproduce the issue this fix is theoretically correct.

mac80211_hwsim: unregister radios
mac80211_hwsim: closing netlink
BUG: unable to handle kernel paging request at ffff88001a06b5ab
IP: [<ffffffffa030df9a>] reg_device_uevent+0x1a/0x50 [cfg80211]
PGD 1836063 PUD 183a063 PMD 1ffcb067 PTE 1a06b160
Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
CPU 0
Modules linked in: cfg80211(-) [last unloaded: mac80211]

Pid: 2279, comm: rmmod Tainted: G        W   3.1.0-wl+ #663 Bochs Bochs
RIP: 0010:[<ffffffffa030df9a>]  [<ffffffffa030df9a>] reg_device_uevent+0x1a/0x50 [cfg80211]
RSP: 0000:ffff88001c5f9d58  EFLAGS: 00010286
RAX: 0000000000000000 RBX: ffff88001d2eda88 RCX: ffff88001c7468fc
RDX: ffff88001a06b5a0 RSI: ffff88001c7467b0 RDI: ffff88001c7467b0
RBP: ffff88001c5f9d58 R08: 000000000000ffff R09: 000000000000ffff
R10: 0000000000000000 R11: 0000000000000001 R12: ffff88001c7467b0
R13: ffff88001d2eda78 R14: ffffffff8164a840 R15: 0000000000000001
FS:  00007f8a91d8a6e0(0000) GS:ffff88001fc00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: ffff88001a06b5ab CR3: 000000001c62e000 CR4: 00000000000006f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process rmmod (pid: 2279, threadinfo ffff88001c5f8000, task ffff88000023c780)
Stack:
 ffff88001c5f9d98 ffffffff812ff7e5 ffffffff8176ab3d ffff88001c7468c2
 000000000000ffff ffff88001d2eda88 ffff88001c7467b0 ffff880000114820
 ffff88001c5f9e38 ffffffff81241dc7 ffff88001c5f9db8 ffffffff81040189
Call Trace:
 [<ffffffff812ff7e5>] dev_uevent+0xc5/0x170
 [<ffffffff81241dc7>] kobject_uevent_env+0x1f7/0x490
 [<ffffffff81040189>] ? sub_preempt_count+0x29/0x60
 [<ffffffff814cab1a>] ? _raw_spin_unlock_irqrestore+0x4a/0x90
 [<ffffffff81305307>] ? devres_release_all+0x27/0x60
 [<ffffffff8124206b>] kobject_uevent+0xb/0x10
 [<ffffffff812fee27>] device_del+0x157/0x1b0
 [<ffffffff8130377d>] platform_device_del+0x1d/0x90
 [<ffffffff81303b76>] platform_device_unregister+0x16/0x30
 [<ffffffffa030fffd>] regulatory_exit+0x5d/0x180 [cfg80211]
 [<ffffffffa032bec3>] cfg80211_exit+0x2b/0x45 [cfg80211]
 [<ffffffff8109a84c>] sys_delete_module+0x16c/0x220
 [<ffffffff8108a23e>] ? trace_hardirqs_on_caller+0x7e/0x120
 [<ffffffff814cba02>] system_call_fastpath+0x16/0x1b
Code: <all your base are belong to me>
RIP  [<ffffffffa030df9a>] reg_device_uevent+0x1a/0x50 [cfg80211]
 RSP <ffff88001c5f9d58>
CR2: ffff88001a06b5ab
---[ end trace 147c5099a411e8c0 ]---
Reported-by: Johannes Berg <johannes@sipsolutions.net>
Cc: Scott James Remnant <keybuk@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

ieee80211_probereq_get() can return NULL in
which case we should clean up & return NULL
in ieee80211_build_probe_req() as well.

Cc: stable@vger.kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

When receiving failed PLCP frames is enabled, there
won't be a rate pointer when we add the radiotap
header and thus the kernel will crash. Fix this by
not assuming the rate pointer is always valid. It's
still always valid for frames that have good PLCP
though, and that is checked & enforced.

This was broken by my
commit fc885189
Author: Johannes Berg <johannes.berg@intel.com>
Date:   Fri Jul 30 13:23:12 2010 +0200

    mac80211: don't check rates on PLCP error frames

where I removed the check in this case but didn't
take into account that the rate info would be used.
Reported-by: Xiaokang Qin <xiaokang.qin@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

A minor fix for the check that verifies that all given SSIDs (in req) exist
in the filters (the match sets)
Signed-off-by: Eyal Shapira <eyal@wizery.com>
Acked-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

This happens with devices using a regulatory domain 0x68 that are only
5Ghz capable because ath_reg_apply_active_scan_flags assumes that we
always have a 2,4Ghz band.

CPU 0 Unable to handle kernel paging request at virtual address 00000000, epc == 82cd838c, ra == 82cd8384
Oops[#1]:
Cpu 0
$ 0 : 00000000 00000061 00000003 00000024
$ 4 : 00000003 000016c1 82f900ac 00000024
$ 8 : 00000000 82cda304 0058bad8 00000005
$12 : 005908f8 001e8481 00000003 1dcd6500
$16 : 00000002 00000000 82c700c0 82c700c0
$20 : 82d415e4 82c70d64 82c70200 82c715bc
$24 : 00000000 11e1a300
$28 : 82ce2000 82ce3c70 82c715a8 82cd8384
Hi : 00000000
Lo : 0000001e
epc : 82cd838c ath_reg_apply_world_flags+0x78/0x17c [ath]
Not tainted
ra : 82cd8384 ath_reg_apply_world_flags+0x70/0x17c [ath]
Status: 1000d403 KERNEL EXL IE
Cause : 80800008
BadVA : 00000000
PrId : 00019374 (MIPS 24Kc)
Modules linked in: ath9k(+) ath9k_common ath9k_hw ath mac80211 cfg80211
	compat_firmware_class compat arc4 aes_generic deflate ecb cbc
	leds_gpio button_hotplug gpio_buttons input_polldev ie
Process insmod (pid: 464, threadinfo=82ce2000, task=838b31d8, tls=00000000)
Stack : 00000000 00000002 82f900ac 82c700c0 82d415e4 82c70d64 00000000 00000068
82f900ac 82cd88f4 82c700c0 82cda304 00000001 000020f0 82f90000 82c70d40
00000002 82f90000 82f900ac 82d4207c 82d518a0 00000002 7fee6118 8017c0d8
00000008 8397ba00 82c70d40 00000000 82c70200 83813000 83813058 b0010000
82d518a0 00000002 7fee6118 82d4b8c8 83445cc0 80120dc0 83804000 800eeda0
...
Call Trace:
[<82cd838c>] ath_reg_apply_world_flags+0x78/0x17c [ath]
[<82cd88f4>] ath_regd_init+0x464/0x488 [ath]
[<82d4207c>] ath9k_init_device+0x6a4/0x6b4 [ath9k]
[<82d4b8c8>] ath_pci_probe+0x27c/0x358 [ath9k]
[<80181de0>] pci_device_probe+0x64/0xa4
[<8019e874>] driver_probe_device+0xb8/0x190
[<8019e9b8>] __driver_attach+0x6c/0xa4
[<8019dfc0>] bus_for_each_dev+0x60/0xb0
[<8019d744>] bus_add_driver+0xc4/0x25c
[<8019ed6c>] driver_register+0xe0/0x198
[<8018206c>] __pci_register_driver+0x50/0xe0
[<82dd0010>] ath9k_init+0x10/0x54 [ath9k]
[<8006b4a0>] do_one_initcall+0x68/0x1ec
[<800a901c>] sys_init_module+0xec/0x23c
[<80062544>] stack_done+0x20/0x3c
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

Two new struct members were not documented, fix that.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

Since this device declares itself as vendor specific, must add
a new entry to device ID table to support it.

usb-device output of this device:

T:  Bus=01 Lev=02 Prnt=02 Port=03 Cnt=01 Dev#=  3 Spd=12  MxCh= 0
D:  Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=413c ProdID=8197 Rev=01.12
S:  Manufacturer=Broadcom Corp
S:  Product=BCM20702A0
S:  SerialNumber=D0DF9AA9C9F1
C:  #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=0mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none)
I:  If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none)
I:  If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I:  If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none)
Signed-off-by: Wen-chien Jesse Sung <jesse.sung@canonical.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

Timers set by __set_chan_timer() should use miliseconds instead of
jiffies. Commit 942ecc9c updated
l2cap_set_timer() so it expects timeout to be specified in msecs
instead of jiffies. This makes timeouts unreliable when CONFIG_HZ
is not set to 1000.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@tieto.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

This reverts commit 33060542.
The commit introduces regression when two 2.1 devices attempt
establish rfcomm channel. Such connection is refused since there's
a security block issue on l2cap. It means the link is unencrypted.

2011-09-16 18:08:46.567616 < ACL data: handle 1 flags 0x00 dlen 24
    0000: 14 00 40 00 06 00 02 00  0f 35 03 19 12 00 ff ff
..@......5....˙˙
    0010: 35 05 0a 00 00 ff ff 00                           5....˙˙.
2011-09-16 18:08:46.572377 > HCI Event: Number of Completed Packets
(0x13) plen 5
    handle 1 packets 1
2011-09-16 18:08:46.577931 > ACL data: handle 1 flags 0x02 dlen 88
    L2CAP(d): cid 0x0040 len 84 [psm 0]
      0000: 07 00 02 00 4f 00 4c 35  4a 35 48 09 00 00 0a 00
....O.L5J5H.....
      0010: 01 00 00 09 00 01 35 03  19 12 00 09 00 05 35 03
......5.......5.
      0020: 19 10 02 09 00 09 35 08  35 06 19 12 00 09 01 02
......5.5.......
      0030: 09 02 00 09 01 02 09 02  01 09 00 0a 09 02 02 09
................
      0040: 00 00 09 02 03 09 00 00  09 02 04 28 01 09 02 05
...........(....
      0050: 09 00 02 00                                       ....
2011-09-16 18:08:46.626057 < HCI Command: Authentication Requested
(0x01|0x0011) plen 2
    handle 1
2011-09-16 18:08:46.627614 > HCI Event: Command Status (0x0f) plen 4
    Authentication Requested (0x01|0x0011) status 0x00 ncmd 1
2011-09-16 18:08:46.627675 > HCI Event: Link Key Request (0x17) plen 6
    bdaddr 00:00:F2:6A:29:69
2011-09-16 18:08:46.634999 < HCI Command: Link Key Request Reply
(0x01|0x000b) plen 22
    bdaddr 00:00:F2:6A:29:69 key 58CD393179FC902E5E8F512A855EE532
2011-09-16 18:08:46.683278 > HCI Event: Command Complete (0x0e) plen 10
    Link Key Request Reply (0x01|0x000b) ncmd 1
    status 0x00 bdaddr 00:00:F2:6A:29:69
2011-09-16 18:08:46.764729 > HCI Event: Auth Complete (0x06) plen 3
    status 0x00 handle 1
2011-09-16 18:08:46.764821 < ACL data: handle 1 flags 0x00 dlen 12
    0000: 08 00 01 00 02 05 04 00  03 00 41 00              ..........A.
2011-09-16 18:08:46.764851 > HCI Event: Command Status (0x0f) plen 4
    Unknown (0x00|0x0000) status 0x00 ncmd 2
2011-09-16 18:08:46.768117 > HCI Event: Number of Completed Packets
(0x13) plen 5
    handle 1 packets 1
2011-09-16 18:08:46.770894 > ACL data: handle 1 flags 0x02 dlen 16
    L2CAP(s): Connect rsp: dcid 0x0000 scid 0x0041 result 3 status 0
      Connection refused - security block
2011-09-16 18:08:49.000691 < ACL data: handle 1 flags 0x00 dlen 12
    0000: 08 00 01 00 06 06 04 00  40 00 40 00              ........@.@.
2011-09-16 18:08:49.015675 > HCI Event: Number of Completed Packets
(0x13) plen 5
    handle 1 packets 1
2011-09-16 18:08:49.016927 > ACL data: handle 1 flags 0x02 dlen 12
    L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0040
2011-09-16 18:08:51.009480 < HCI Command: Disconnect (0x01|0x0006) plen
3
    handle 1 reason 0x13
    Reason: Remote User Terminated Connection
2011-09-16 18:08:51.011525 > HCI Event: Command Status (0x0f) plen 4
    Disconnect (0x01|0x0006) status 0x00 ncmd 1
2011-09-16 18:08:51.123494 > HCI Event: Disconn Complete (0x05) plen 4
    status 0x00 handle 1 reason 0x16
    Reason: Connection Terminated by Local Host
Signed-off-by: Arek Lichwa <arkadiusz.lichwa@tieto.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

Set IEEE80211_FCTL_MOREDATA bit also in case we have buffered
frames (more than one) only for one AC.
Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

If kmemdup() fails we leak the memory allocated to bss_desc.
This patch fixes the leak.
I also removed the pointless default assignment of 'NULL' to 'bss_desc'
while I was there anyway.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Reviewed-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

When comparing two items by IE, the sort order
wasn't stable, which could lead to issues in the
rbtree. Make it stable by making a missing IE
sort before a present IE.

Also sort by length first if it differs and then
by contents.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

In other modes the parameters should not be set.
Right now, mac80211 will set them, even if the
user asked for setting them on VLANs which the
driver doesn't know about, causing all kinds of
trouble.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

Since the NL80211_ATTR_HT_CAPABILITY attribute is
used as a struct, it needs a minimum, not maximum
length. Enforce that properly. Not doing so could
potentially lead to reading after the buffer.

Cc: stable@vger.kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

Some buggy APs (and even P2P_GO) don't advertise their
basic rates in the association response.

In such case, use the min supported rate as the
basic rate.
Reported-by: Pontus Fuchs <pontus.fuchs@gmail.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

Though it's unlikely, di may be null, so we can't dereference
di->dma.dmactrlflags until we've checked it.

Move this de-reference after the check, and adjust the error
message to not require de-referencing di.

This is based upon Julia's original patch:
<1319846297-2985-2-git-send-email-julia@diku.dk>
Reported-by: Julia Lawall <julia@diku.dk>
Acked-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Julian Calaby <julian.calaby@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>