Jeff Kirsher says:

====================
100GbE Intel Wired LAN Driver Updates 2015-12-22

This series contains updates to fm10k only.

Bruce cleans up the initialization of fm10k_workqueue at the global level,
which fixes a checkpatch.pl error.  Made several other cleanups of the
driver, like making structures that do not change constant, remove unused
code, cleanup code comments and use boolean states true/false instead of
an integer since a bool is all that is needed.

Jacob fixed the TLV format for little endian structures which are 4 byte
aligned copy, so add an additional __aligned(4) and __packed to ensure
that these structures are actually 4 byte aligned and packed correctly.
Updated the driver to use ether_addr_equal() instead of memcmp() to
compare MAC addresses.

Alex Duyck cleans up the exception handling so all of the paths result in
a similar state if we fail.  Specifically the driver will now unload the
mailbox interrupt, free the queue vectors and MSI-X, and then detach the
interface.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Tri-states need 'if IS_ENABLED()', booleans should use 'ifdef'.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Cleanup a number of issues with function header comments, lower-case
acronyms (i.e. FIFO, TLV), duplicate comments and a stubbed-out header
comment for fm10k_sm_mbx_init.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

These structures never change so declare them as const.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

When comparing MAC addresses, use ether_addr_equal instead of memcmp to
ETH_ALEN length. Found and replaced using the following sed:

 sed -e 's/memcmp\x28\(.*\), ETH_ALEN\x29/!ether_addr_equal\x28\1\x29/'
Reported-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch is meant to cleanup the exception handling for the paths where
we reset the interrupts and then reconfigure them.  In all of these paths
we had very different levels of exception handling.  I have updated the
driver so that all of the paths should result in a similar state if we
fail.

Specifically the driver will now unload the mailbox interrupt, free the
queue vectors and MSI-X, and then detach the interface.

In addition for any of the PCIe related resets I have added a check with
the hw_ready function to just make sure the registers are in a readable
state prior to reopening the interface.
Signed-off-by: Alexander Duyck <aduyck@mirantis.com>
Reviewed-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

The TLV format for little endian structures is actually 4 byte aligned
copy. To this end, we need to add an additional __aligned(4) marker
along with __packed to ensure that these structures are actually 4 byte
aligned and packed correctly. Use of just __packed will not work as this
will result in 1byte alignment which is incorrect. Add a comment
explaining the reasoning behind why these structures need the special
treatment.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Cleans up checkpatch GLOBAL_INITIALIZERS error
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

This is an API consolidation only. The use of kmalloc + memset to 0
is equivalent to kcalloc in this case as it is allocating an array
of elements.
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

A cleanup patch I did was unfortunately wrong and introduced
multiple serious bugs in the netcp rx processing, as indicated
by these correct gcc warnings:

drivers/net/ethernet/ti/netcp_core.c:776:14: warning: 'buf_ptr' may be used uninitialized in this function [-Wuninitialized]
drivers/net/ethernet/ti/netcp_core.c:687:14: warning: 'ptr' may be used uninitialized in this function [-Wuninitialized]

I have checked the patch once more and found that a call to
get_pkt_info() accidentally got removed in netcp_free_rx_desc_chain,
and netcp_process_one_rx_packet no longer retrieved the correct
buffer length. This patch should fix all the known problems,
but I did not test on real hardware.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 89907779 ("netcp: try to reduce type confusion in descriptors")
Signed-off-by: David S. Miller <davem@davemloft.net>

Since it is possible for an external system to send oversize packets
at anytime, it is best for driver not to print a message and spam
the log (potential external DoS).

Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=109471Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Adding support for SYN_RECV request sockets to tcp_abort()
is quite easy after our tcp listener rewrite.

Note that we also need to better handle listeners, or we might
leak not yet accepted children, because of a missing
inet_csk_listen_stop() call.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Lorenzo Colitti <lorenzo@google.com>
Tested-by: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Daniel Borkmann says:

====================
Misc BPF updates

This series contains a couple of misc updates to the BPF code, besides
others a new helper bpf_skb_load_bytes(), moving clearing of A/X to the
classic converter, etc. Please see individual patches for details.

Thanks!
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Add couple of test cases for interpreter but also JITs, f.e. to test that
when imm32 moves are being done, upper 32bits of the regs are being zero
extended.

Without JIT:

  [...]
  [ 1114.129301] test_bpf: #43 MOV REG64 jited:0 128 PASS
  [ 1114.130626] test_bpf: #44 MOV REG32 jited:0 139 PASS
  [ 1114.132055] test_bpf: #45 LD IMM64 jited:0 124 PASS
  [...]

With JIT (generated code can as usual be nicely verified with the help of
bpf_jit_disasm tool):

  [...]
  [ 1062.726782] test_bpf: #43 MOV REG64 jited:1 6 PASS
  [ 1062.726890] test_bpf: #44 MOV REG32 jited:1 6 PASS
  [ 1062.726993] test_bpf: #45 LD IMM64 jited:1 6 PASS
  [...]
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

When sometimes structs or variables need to be initialized/'memset' to 0 in
an eBPF C program, the x86 BPF JIT converts this to use immediates. We can
however save a couple of bytes (f.e. even up to 7 bytes on a single emmission
of BPF_LD | BPF_IMM | BPF_DW) in the image by detecting such case and use xor
on the dst register instead.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Comment says "User BPF's register A is mapped to our BPF register 6",
which is actually wrong as the mapping is on register 0. This can
already be inferred from the code itself. So just remove it before
someone makes assumptions based on that. Only code tells truth. ;)
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Back in the days where eBPF (or back then "internal BPF" ;->) was not
exposed to user space, and only the classic BPF programs internally
translated into eBPF programs, we missed the fact that for classic BPF
A and X needed to be cleared. It was fixed back then via 83d5b7ef
("net: filter: initialize A and X registers"), and thus classic BPF
specifics were added to the eBPF interpreter core to work around it.

This added some confusion for JIT developers later on that take the
eBPF interpreter code as an example for deriving their JIT. F.e. in
f75298f5 ("s390/bpf: clear correct BPF accumulator register"), at
least X could leak stack memory. Furthermore, since this is only needed
for classic BPF translations and not for eBPF (verifier takes care
that read access to regs cannot be done uninitialized), more complexity
is added to JITs as they need to determine whether they deal with
migrations or native eBPF where they can just omit clearing A/X in
their prologue and thus reduce image size a bit, see f.e. cde66c2d
("s390/bpf: Only clear A and X for converted BPF programs"). In other
cases (x86, arm64), A and X is being cleared in the prologue also for
eBPF case, which is unnecessary.

Lets move this into the BPF migration in bpf_convert_filter() where it
actually belongs as long as the number of eBPF JITs are still few. It
can thus be done generically; allowing us to remove the quirk from
__bpf_prog_run() and to slightly reduce JIT image size in case of eBPF,
while reducing code duplication on this matter in current(/future) eBPF
JITs.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Tested-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Cc: Zi Shen Lim <zlim.lnx@gmail.com>
Cc: Yang Shi <yang.shi@linaro.org>
Acked-by: Yang Shi <yang.shi@linaro.org>
Acked-by: Zi Shen Lim <zlim.lnx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When hacking tc programs with eBPF, one of the issues that come up
from time to time is to load addresses from headers. In eBPF as in
classic BPF, we have BPF_LD | BPF_ABS | BPF_{B,H,W} instructions that
extract a byte, half-word or word out of the skb data though helpers
such as bpf_load_pointer() (interpreter case).

F.e. extracting a whole IPv6 address could possibly look like ...

  union v6addr {
    struct {
      __u32 p1;
      __u32 p2;
      __u32 p3;
      __u32 p4;
    };
    __u8 addr[16];
  };

  [...]

  a.p1 = htonl(load_word(skb, off));
  a.p2 = htonl(load_word(skb, off +  4));
  a.p3 = htonl(load_word(skb, off +  8));
  a.p4 = htonl(load_word(skb, off + 12));

  [...]

  /* access to a.addr[...] */

This work adds a complementary helper bpf_skb_load_bytes() (we also
have bpf_skb_store_bytes()) as an alternative where the same call
would look like from an eBPF program:

  ret = bpf_skb_load_bytes(skb, off, addr, sizeof(addr));

Same verifier restrictions apply as in ffeedafb ("bpf: introduce
current->pid, tgid, uid, gid, comm accessors") case, where stack memory
access needs to be statically verified and thus guaranteed to be
initialized in first use (otherwise verifier cannot tell whether a
subsequent access to it is valid or not as it's runtime dependent).
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pablo Neira Ayuso says:

====================
Netfilter updates for net-next

The following patchset contains the first batch of Netfilter updates for
the upcoming 4.5 kernel. This batch contains userspace netfilter header
compilation fixes, support for packet mangling in nf_tables, the new
tracing infrastructure for nf_tables and cgroup2 support for iptables.
More specifically, they are:

1) Two patches to include dependencies in our netfilter userspace
   headers to resolve compilation problems, from Mikko Rapeli.

2) Four comestic cleanup patches for the ebtables codebase, from Ian Morris.

3) Remove duplicate include in the netfilter reject infrastructure,
   from Stephen Hemminger.

4) Two patches to simplify the netfilter defragmentation code for IPv6,
   patch from Florian Westphal.

5) Fix root ownership of /proc/net netfilter for unpriviledged net
   namespaces, from Philip Whineray.

6) Get rid of unused fields in struct nft_pktinfo, from Florian Westphal.

7) Add mangling support to our nf_tables payload expression, from
   Patrick McHardy.

8) Introduce a new netlink-based tracing infrastructure for nf_tables,
   from Florian Westphal.

9) Change setter functions in nfnetlink_log to be void, from
    Rami Rosen.

10) Add netns support to the cttimeout infrastructure.

11) Add cgroup2 support to iptables, from Tejun Heo.

12) Introduce nfnl_dereference_protected() in nfnetlink, from Florian.

13) Add support for mangling pkttype in the nf_tables meta expression,
    also from Florian.

BTW, I need that you pull net into net-next, I have another batch that
requires changes that I don't yet see in net.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Netdevs default to carrier on, we should call netif_carrier_off()
during initialization since we handle carrier state changes in the
driver.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Rolf Neugebauer <rolf.neugebauer@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

David Ahern says:

====================
net: Allow accepted sockets to be bound to l3mdev domain

Allow accepted sockets to derive their sk_bound_dev_if setting from the
l3mdev domain in which the packets originated. This version adds a sysctl
to control whether the setting is inherited, making the functionality
similar to sk_mark and its sysctl_tcp_fwmark_accept setting.

This effectively allow a process to have a "VRF-global" listen socket,
with child sockets bound to the VRF device in which the packet originated.
A similar behavior can be achieved using sk_mark, but a solution using marks
is incomplete as it does not handle duplicate addresses in different L3
domains/VRFs. Allowing sockets to inherit the sk_bound_dev_if from l3mdev
domain provides a complete solution.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Allow accepted sockets to derive their sk_bound_dev_if setting from the
l3mdev domain in which the packets originated. A sysctl setting is added
to control the behavior which is similar to sk_mark and
sysctl_tcp_fwmark_accept.

This effectively allow a process to have a "VRF-global" listen socket,
with child sockets bound to the VRF device in which the packet originated.
A similar behavior can be achieved using sk_mark, but a solution using marks
is incomplete as it does not handle duplicate addresses in different L3
domains/VRFs. Allowing sockets to inherit the sk_bound_dev_if from l3mdev
domain provides a complete solution.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add helper to lookup l3mdev master index given a device index.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a new address generator mode, using the stable address generator
with an automatically generated secret. This is intended as a default
address generator mode for device types with no EUI64 implementation.
The new generator is used for ARPHRD_NONE interfaces initially, adding
default IPv6 autoconf support to e.g. tun interfaces.

If the addrgenmode is set to 'random', either by default or manually,
and no stable secret is available, then a random secret is used as
input for the stable-privacy address generator.  The secret can be
read and modified like manually configured secrets, using the proc
interface.  Modifying the secret will change the addrgen mode to
'stable-privacy' to indicate that it operates on a known secret.

Existing behaviour of the 'stable-privacy' mode is kept unchanged. If
a known secret is available when the device is created, then the mode
will default to 'stable-privacy' as before.  The mode can be manually
set to 'random' but it will behave exactly like 'stable-privacy' in
this case. The secret will not change.

Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
Cc: 吉藤英明 <hideaki.yoshifuji@miraclelinux.com>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The recently added generic ILA translation facility fails to
build when CONFIG_NETFILTER is disabled:

net/ipv6/ila/ila_xlat.c:229:20: warning: 'struct nf_hook_state' declared inside parameter list
net/ipv6/ila/ila_xlat.c:235:27: error: array type has incomplete element type 'struct nf_hook_ops'
 static struct nf_hook_ops ila_nf_hook_ops[] __read_mostly = {

This adds an explicit Kconfig dependency to avoid that case.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 7f00feaf ("ila: Add generic ILA translation facility")
Signed-off-by: David S. Miller <davem@davemloft.net>

This allows to redirect bridged packets to local machine:

ether type ip ether daddr set aa:53:08:12:34:56 meta pkttype set unicast
Without 'set unicast', ip stack discards PACKET_OTHERHOST skbs.

It is also useful to add support for a '-m cluster like' nft rule
(where switch floods packets to several nodes, and each cluster node
 node processes a subset of packets for load distribution).

Mangling is restricted to HOST/OTHER/BROAD/MULTICAST, i.e. you cannot set
skb->pkt_type to PACKET_KERNEL or change PACKET_LOOPBACK to PACKET_HOST.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Conflicts:
	drivers/net/geneve.c

Here we had an overlapping change, where in 'net' the extraneous stats
bump was being removed whilst in 'net-next' the final argument to
udp_tunnel6_xmit_skb() was being changed.
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull networking fixes from David Miller:

 1) Fix uninitialized variable warnings in nfnetlink_queue, a lot of
    people reported this...  From Arnd Bergmann.

 2) Don't init mutex twice in i40e driver, from Jesse Brandeburg.

 3) Fix spurious EBUSY in rhashtable, from Herbert Xu.

 4) Missing DMA unmaps in mvpp2 driver, from Marcin Wojtas.

 5) Fix race with work structure access in pppoe driver causing
    corruptions, from Guillaume Nault.

 6) Fix OOPS due to sh_eth_rx() not checking whether netdev_alloc_skb()
    actually succeeded or not, from Sergei Shtylyov.

 7) Don't lose flags when settifn IFA_F_OPTIMISTIC in ipv6 code, from
    Bjørn Mork.

 8) VXLAN_HD_RCO defined incorrectly, fix from Jiri Benc.

 9) Fix clock source used for cookies in SCTP, from Marcelo Ricardo
    Leitner.

10) aurora driver needs HAS_DMA dependency, from Geert Uytterhoeven.

11) ndo_fill_metadata_dst op of vxlan has to handle ipv6 tunneling
    properly as well, from Jiri Benc.

12) Handle request sockets properly in xfrm layer, from Eric Dumazet.

13) Double stats update in ipv6 geneve transmit path, fix from Pravin B
    Shelar.

14) sk->sk_policy[] needs RCU protection, and as a result
    xfrm_policy_destroy() needs to free policies using an RCU grace
    period, from Eric Dumazet.

15) SCTP needs to clone ipv6 tx options in order to avoid use after
    free, from Eric Dumazet.

16) Missing kbuild export if ila.h, from Stephen Hemminger.

17) Missing mdiobus_alloc() return value checking in mdio-mux.c, from
    Tobias Klauser.

18) Validate protocol value range in ->create() methods, from Hannes
    Frederic Sowa.

19) Fix early socket demux races that result in illegal dst reuse, from
    Eric Dumazet.

20) Validate socket address length in pptp code, from WANG Cong.

21) skb_reorder_vlan_header() uses incorrect offset and can corrupt
    packets, from Vlad Yasevich.

22) Fix memory leaks in nl80211 registry code, from Ola Olsson.

23) Timeout loop count handing fixes in mISDN, xgbe, qlge, sfc, and
    qlcnic.  From Dan Carpenter.

24) msg.msg_iocb needs to be cleared in recvfrom() otherwise, for
    example, AF_ALG will interpret it as an async call.  From Tadeusz
    Struk.

25) inetpeer_set_addr_v4 forgets to initialize the 'vif' field, from
    Eric Dumazet.

26) rhashtable enforces the minimum table size not early enough,
    breaking how we calculate the per-cpu lock allocations.  From
    Herbert Xu.

27) Fix FCC port lockup in 82xx driver, from Martin Roth.

28) FOU sockets need to be freed using RCU, from Hannes Frederic Sowa.

29) Fix out-of-bounds access in __skb_complete_tx_timestamp() and
    sock_setsockopt() wrt.  timestamp handling.  From WANG Cong.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (117 commits)
  net: check both type and procotol for tcp sockets
  drivers: net: xgene: fix Tx flow control
  tcp: restore fastopen with no data in SYN packet
  af_unix: Revert 'lock_interruptible' in stream receive code
  fou: clean up socket with kfree_rcu
  82xx: FCC: Fixing a bug causing to FCC port lock-up
  gianfar: Don't enable RX Filer if not supported
  net: fix warnings in 'make htmldocs' by moving macro definition out of field declaration
  rhashtable: Fix walker list corruption
  rhashtable: Enforce minimum size on initial hash table
  inet: tcp: fix inetpeer_set_addr_v4()
  ipv6: automatically enable stable privacy mode if stable_secret set
  net: fix uninitialized variable issue
  bluetooth: Validate socket address length in sco_sock_bind().
  net_sched: make qdisc_tree_decrease_qlen() work for non mq
  ser_gigaset: remove unnecessary kfree() calls from release method
  ser_gigaset: fix deallocation of platform device structure
  ser_gigaset: turn nonsense checks into WARN_ON
  ser_gigaset: fix up NULL checks
  qlcnic: fix a timeout loop
  ...

When the underlying device supports offloads encapulated traffic,
we need to reflect that through the hw_enc_features field of the
team net-device.

This will cause the xmit path in the core networking stack to provide
team with encapsulated GSO frames to offload into the HW etc.

Using this over Mellanox ConnectX3-pro (mlx4 driver) card that supports
VXLAN offloads we got 36.0 Gbits/sec using eight iperf streams.
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The CDC descriptors found on these vendor specific functions should
not be considered authoritative.  They seem to be ignored by drivers
for other systems, and the quality is therefore low.

One device (1e0e:9001) has been reported to have such a bogus union
descriptor on the QMI function, making it fail probing even if the
device id was dynamically added.  The report was not complete enough
to allow adding a device entry for this modem. But this should at
least fix the dynamic id probing problem.
Reported-by: Kanerva Topi <Topi.Kanerva@cinia.fi>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>

Instead of being at the MAC level the reset gpio preperty is moved at the
PHY child node level. It is still managed by the MAC, but from the point
of view of the binding it make more sense to be part of the PHY node.

This commit also fixes a build errors if GPIOLIB is not selected.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Hariprasad Shenai says:

====================
Few l2 table related enhancements for cxgb4

This series adds a new API to allocate and update l2t entry, replaces
arpq_head/arpq_tail with double skb double linked list. Use t4_mgmt_tx()
to send control packets of l2t write request. Use symbolic constants
while calculating vlan priority.

This patch series has been created against net-next tree and includes
patches on cxgb4 driver.

We have included all the maintainers of respective drivers. Kindly review
the change and let us know in case of any review comments.

Thanks

V2: Remove unnecessary MAS operation while calculating vlan prio in
    PATCH 1/4 ("cxgb4: Use symbolic constant for VLAN priority calculation")
    based on review comment by David Miller
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Based on original work by Michael Werner <werner@chelsio.com>
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Based on original work by Michael Werner <werner@chelsio.com>
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Based on original work by Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Dmitry reported the following out-of-bound access:

Call Trace:
 [<ffffffff816cec2e>] __asan_report_load4_noabort+0x3e/0x40
mm/kasan/report.c:294
 [<ffffffff84affb14>] sock_setsockopt+0x1284/0x13d0 net/core/sock.c:880
 [<     inline     >] SYSC_setsockopt net/socket.c:1746
 [<ffffffff84aed7ee>] SyS_setsockopt+0x1fe/0x240 net/socket.c:1729
 [<ffffffff85c18c76>] entry_SYSCALL_64_fastpath+0x16/0x7a
arch/x86/entry/entry_64.S:185

This is because we mistake a raw socket as a tcp socket.
We should check both sk->sk_type and sk->sk_protocol to ensure
it is a tcp socket.

Willem points out __skb_complete_tx_timestamp() needs to fix as well.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>