- 12 Jul, 2012 4 commits
-
-
David S. Miller authored
And thus, we can remove the ping_err() hack. Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
This introduce TSQ (TCP Small Queues) TSQ goal is to reduce number of TCP packets in xmit queues (qdisc & device queues), to reduce RTT and cwnd bias, part of the bufferbloat problem. sk->sk_wmem_alloc not allowed to grow above a given limit, allowing no more than ~128KB [1] per tcp socket in qdisc/dev layers at a given time. TSO packets are sized/capped to half the limit, so that we have two TSO packets in flight, allowing better bandwidth use. As a side effect, setting the limit to 40000 automatically reduces the standard gso max limit (65536) to 40000/2 : It can help to reduce latencies of high prio packets, having smaller TSO packets. This means we divert sock_wfree() to a tcp_wfree() handler, to queue/send following frames when skb_orphan() [2] is called for the already queued skbs. Results on my dev machines (tg3/ixgbe nics) are really impressive, using standard pfifo_fast, and with or without TSO/GSO. Without reduction of nominal bandwidth, we have reduction of buffering per bulk sender : < 1ms on Gbit (instead of 50ms with TSO) < 8ms on 100Mbit (instead of 132 ms) I no longer have 4 MBytes backlogged in qdisc by a single netperf session, and both side socket autotuning no longer use 4 Mbytes. As skb destructor cannot restart xmit itself ( as qdisc lock might be taken at this point ), we delegate the work to a tasklet. We use one tasklest per cpu for performance reasons. If tasklet finds a socket owned by the user, it sets TSQ_OWNED flag. This flag is tested in a new protocol method called from release_sock(), to eventually send new segments. [1] New /proc/sys/net/ipv4/tcp_limit_output_bytes tunable [2] skb_orphan() is usually called at TX completion time, but some drivers call it in their start_xmit() handler. These drivers should at least use BQL, or else a single TCP session can still fill the whole NIC TX ring, since TSQ will have no effect. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Dave Taht <dave.taht@bufferbloat.net> Cc: Tom Herbert <therbert@google.com> Cc: Matt Mathis <mattmathis@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Nandita Dukkipati <nanditad@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Alexander Duyck authored
The recent patch "tcp: Maintain dynamic metrics in local cache." introduced an out of bounds access due to what appears to be a typo. I believe this change should resolve the issue by replacing the access to RTAX_CWND with TCP_METRIC_CWND. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 11 Jul, 2012 36 commits
-
-
David S. Miller authored
Fixes build when ipv6 is disabled. Reported-by: Fengguang Wu <wfg@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Li RongQing authored
mld->mld_maxdelay is net endian, so we should use ntohs, not htons CC: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Li RongQing authored
commit 6d29b1ef introduces a bug, ntohs is __be16_to_cpu, not cpu_to_be16. We always use htons on IP_OFFSET and IP_MF, then compare with network package. Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Li RongQing authored
ETH_P_IP is host Endian, skb->protocol is big Endian, when compare them, Using htons on skb->protocol is wrong. And fix two code style issues: indentation and remove unnecessary parentheses. CC: Tristram Ha <Tristram.Ha@micrel.com> CC: Ben Hutchings <bhutchings@solarflare.com> CC: Joe Perches <joe@perches.com> Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller authored
Conflicts: net/batman-adv/bridge_loop_avoidance.c net/batman-adv/bridge_loop_avoidance.h net/batman-adv/soft-interface.c net/mac80211/mlme.c With merge help from Antonio Quartulli (batman-adv) and Stephen Rothwell (drivers/net/usb/qmi_wwan.c). The net/mac80211/mlme.c conflict seemed easy enough, accounting for a conversion to some new tracing macros. Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michael Chan authored
In rare cases, bnx2x_free_tx_skbs() can unmap the wrong DMA address when it gets to the last entry of the tx ring. We were not using the proper macro to skip the last entry when advancing the tx index. Reported-by: Zongyun Lai <zlai@vmware.com> Reviewed-by: Jeffrey Huang <huangjw@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Or Gerlitz reported triggering of WARN_ON_ONCE(delta < len); in skb_try_coalesce() This warning tracks drivers that incorrectly set skb->truesize IPoIB indeed allocates a full page to store a fragment, but only accounts in skb->truesize the used part of the page (frame length) This patch fixes skb truesize underestimation, and also fixes a performance issue, because RX skbs have not enough tailroom to allow IP and TCP stacks to pull their header in skb linear part without an expensive call to pskb_expand_head() Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Or Gerlitz <ogerlitz@mellanox.com> Cc: Erez Shitrit <erezsh@mellanox.com> Cc: Shlomo Pongartz <shlomop@mellanox.com> Cc: Roland Dreier <roland@purestorage.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Amir Hanania authored
In driver reload test there is a memory leak. The structure vlan_info was not freed when the driver was removed. It was not released since the nr_vids var is one after last vlan was removed. The nr_vids is one, since vlan zero is added to the interface when the interface is being set, but the vlan zero is not deleted at unregister. Fix - delete vlan zero when we unregister the device. Signed-off-by: Amir Hanania <amir.hanania@intel.com> Acked-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.open-mesh.org/linux-mergeDavid S. Miller authored
Included changes: - fix a bug generated by the wrong interaction between the GW feature and the Bridge Loop Avoidance
-
Jitendra Kalsaria authored
Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jitendra Kalsaria authored
Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jitendra Kalsaria authored
Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jitendra Kalsaria authored
Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jitendra Kalsaria authored
Missing case was causing ethtool self test to print garbage value in extra info section. Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jitendra Kalsaria authored
Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jitendra Kalsaria authored
Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jitendra Kalsaria authored
Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jitendra Kalsaria authored
TX queue was being stopped at beginning of send path instead of at the end when last descriptor is used. Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Rob Herring authored
Enabling RX cut-thru mode yields better performance as received frames start getting written to memory before a whole frame is received. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Rob Herring authored
Increase the number of outstanding read and write AXI transactions from 1 to 8 for better performance. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Rob Herring authored
Fix intermittent hangs in xgmac_rx_refill. If a ring buffer entry already had an skb allocated, then xgmac_rx_refill would get stuck in a loop. This can happen on a rx error when we just leave the skb allocated to the entry. [ 7884.510000] INFO: rcu_preempt detected stall on CPU 0 (t=727315 jiffies) [ 7884.510000] [<c0010a59>] (unwind_backtrace+0x1/0x98) from [<c006fd93>] (__rcu_pending+0x11b/0x2c4) [ 7884.510000] [<c006fd93>] (__rcu_pending+0x11b/0x2c4) from [<c0070b95>] (rcu_check_callbacks+0xed/0x1a8) [ 7884.510000] [<c0070b95>] (rcu_check_callbacks+0xed/0x1a8) from [<c0036abb>] (update_process_times+0x2b/0x48) [ 7884.510000] [<c0036abb>] (update_process_times+0x2b/0x48) from [<c004e8fd>] (tick_sched_timer+0x51/0x94) [ 7884.510000] [<c004e8fd>] (tick_sched_timer+0x51/0x94) from [<c0045527>] (__run_hrtimer+0x4f/0x1e8) [ 7884.510000] [<c0045527>] (__run_hrtimer+0x4f/0x1e8) from [<c0046003>] (hrtimer_interrupt+0xd7/0x1e4) [ 7884.510000] [<c0046003>] (hrtimer_interrupt+0xd7/0x1e4) from [<c00101d3>] (twd_handler+0x17/0x24) [ 7884.510000] [<c00101d3>] (twd_handler+0x17/0x24) from [<c006be39>] (handle_percpu_devid_irq+0x59/0x114) [ 7884.510000] [<c006be39>] (handle_percpu_devid_irq+0x59/0x114) from [<c0069aab>] (generic_handle_irq+0x17/0x2c) [ 7884.510000] [<c0069aab>] (generic_handle_irq+0x17/0x2c) from [<c000cc8d>] (handle_IRQ+0x35/0x7c) [ 7884.510000] [<c000cc8d>] (handle_IRQ+0x35/0x7c) from [<c033b153>] (__irq_svc+0x33/0xb8) [ 7884.510000] [<c033b153>] (__irq_svc+0x33/0xb8) from [<c0244b06>] (xgmac_rx_refill+0x3a/0x140) [ 7884.510000] [<c0244b06>] (xgmac_rx_refill+0x3a/0x140) from [<c02458ed>] (xgmac_poll+0x265/0x3bc) [ 7884.510000] [<c02458ed>] (xgmac_poll+0x265/0x3bc) from [<c029fcbf>] (net_rx_action+0xc3/0x200) [ 7884.510000] [<c029fcbf>] (net_rx_action+0xc3/0x200) from [<c0030cab>] (__do_softirq+0xa3/0x1bc) Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Rob Herring authored
Fix net tx watchdog timeout recovery. The descriptor ring was reset, but the DMA engine was not reset to the beginning of the ring. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jon Mason authored
skb->dev is being unnecessarily set by the driver on packet recieve. eth_type_trans already sets skb->dev to the proper value and it is not referenced anywhere else in the dirver, thus making its setting unnecessary. Signed-off-by: Jon Mason <jdmason@kudzu.us> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jon Mason authored
skb->dev is being unnecessarily set during ring init and skb alloc in rx. It is already being set to the proper value when eth_type_trans is called on packet receive, and the skb->dev is not referenced anywhere else in the code. Signed-off-by: Jon Mason <jdmason@kudzu.us> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jon Mason authored
skb->dev is being unnecessarily set by the driver's skb alloc routine (which is called in init and during rx). It is already being set to the proper value when eth_type_trans is called on packet receive, and the skb->dev is not referenced anywhere else in the code. Signed-off-by: Jon Mason <jdmason@kudzu.us> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jon Mason authored
skb->dev is being unnecessarily set during ring init and skb alloc in rx. It is already being set to the proper value when eth_type_trans is called on packet receive, and the skb->dev is not referenced anywhere else in the code. Signed-off-by: Jon Mason <jdmason@kudzu.us> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jon Mason authored
skb->dev is being unnecessarily set by the driver on packet recieve. eth_type_trans already sets skb->dev to the proper value and it is not referenced anywhere else in the dirver, thus making its setting unnecessary. Signed-off-by: Jon Mason <jdmason@kudzu.us> Cc: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Cc: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Cc: Ron Mercer <ron.mercer@qlogic.com> Cc: linux-driver@qlogic.com Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jon Mason authored
skb->dev is being unnecessarily set before calling eth_type_trans. eth_type_trans already sets skb->dev to the proper value, thus making this unnecessary. Signed-off-by: Jon Mason <jdmason@kudzu.us> Cc: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Cc: Sony Chacko <sony.chacko@qlogic.com> Cc: linux-driver@qlogic.com Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jon Mason authored
skb->dev is being unnecessarily set during ring init. It is already being set to the proper value when eth_type_trans is called on packet receive, and the skb->dev is not referenced anywhere else in the code. Signed-off-by: Jon Mason <jdmason@kudzu.us> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jon Mason authored
skb->dev is being unnecessarily set before calling eth_type_trans. eth_type_trans already sets skb->dev to the proper value, thus making this unnecessary. Signed-off-by: Jon Mason <jdmason@kudzu.us> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jon Mason authored
skb->dev is being unnecessarily set by the driver on packet recieve. eth_type_trans already sets skb->dev to the proper value and it is not referenced anywhere else in the dirver, thus making its setting unnecessary. Signed-off-by: Jon Mason <jdmason@kudzu.us> Cc: Sony Chacko <sony.chacko@qlogic.com> Cc: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jon Mason authored
skb->dev is being unnecessarily set after calling eth_type_trans. eth_type_trans already sets skb->dev to the proper value, thus making this unnecessary. Signed-off-by: Jon Mason <jdmason@kudzu.us> Cc: Christian Benvenuti <benve@cisco.com> Cc: Roopa Prabhu <roprabhu@cisco.com> Cc: Neel Patel <neepatel@cisco.com> Cc: Nishank Trivedi <nistrive@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jon Mason authored
skb->dev is being unnecessarily set during ring init. It is already being set to the proper value when eth_type_trans is called on packet receive, and the skb->dev is not referenced anywhere else in the code. Signed-off-by: Jon Mason <jdmason@kudzu.us> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jon Mason authored
URLs to neterion.com and s2io.com no longer resolve. Remove all references to these URLs in the driver source and documentation. Signed-off-by: Jon Mason <jdmason@kudzu.us> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
On 64 bit arches having efficient unaligned accesses (eg x86_64) we can use long words to reduce number of instructions for free. Joe Perches suggested to change ipv6_masked_addr_cmp() to return a bool instead of 'int', to make sure ipv6_masked_addr_cmp() cannot be used in a sorting function. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-