gntdev simply wants to monitor a specific VMA for any notifier events,
this can be done straightforwardly using mmu_interval_notifier_insert()
over the VMA's VA range.

The notifier should be attached until the original VMA is destroyed.

It is unclear if any of this is even sane, but at least a lot of duplicate
code is removed.

Link: https://lore.kernel.org/r/20191112202231.3856-15-jgg@ziepe.caReviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

The only two users of this are now converted to use mmu_interval_notifier,
delete all the code and update hmm.rst.

Link: https://lore.kernel.org/r/20191112202231.3856-14-jgg@ziepe.caReviewed-by: Jérôme Glisse <jglisse@redhat.com>
Tested-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Convert the collision-retry lock around hmm_range_fault to use the one now
provided by the mmu_interval notifier.

Although this driver does not seem to use the collision retry lock that
hmm provides correctly, it can still be converted over to use the
mmu_interval_notifier api instead of hmm_mirror without too much trouble.

This also deletes another place where a driver is associating additional
data (struct amdgpu_mn) with a mmu_struct.

Link: https://lore.kernel.org/r/20191112202231.3856-13-jgg@ziepe.caSigned-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Tested-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Remove the interval tree in the driver and rely on the tree maintained by
the mmu_notifier for delivering mmu_notifier invalidation callbacks.

For some reason amdgpu has a very complicated arrangement where it tries
to prevent duplicate entries in the interval_tree, this is not necessary,
each amdgpu_bo can be its own stand alone entry. interval_tree already
allows duplicates and overlaps in the tree.

Also, there is no need to remove entries upon a release callback, the
mmu_interval API safely allows objects to remain registered beyond the
lifetime of the mm. The driver only has to stop touching the pages during
release.

Link: https://lore.kernel.org/r/20191112202231.3856-12-jgg@ziepe.caReviewed-by: Philip Yang <Philip.Yang@amd.com>
Tested-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

find_vma() must be called under the mmap_sem, reorganize this code to
do the vma check after entering the lock.

Further, fix the unlocked use of struct task_struct's mm, instead use
the mm from hmm_mirror which has an active mm_grab. Also the mm_grab
must be converted to a mm_get before acquiring mmap_sem or calling
find_vma().

Fixes: 66c45500 ("drm/amdgpu: use new HMM APIs and helpers")
Fixes: 0919195f ("drm/amdgpu: Enable amdgpu_ttm_tt_get_user_pages in worker threads")
Link: https://lore.kernel.org/r/20191112202231.3856-11-jgg@ziepe.caAcked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Tested-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Remove the hmm_mirror object and use the mmu_interval_notifier API instead
for the range, and use the normal mmu_notifier API for the general
invalidation callback.

While here re-organize the pagefault path so the locking pattern is clear.

nouveau is the only driver that uses a temporary range object and instead
forwards nearly every invalidation range directly to the HW. While this is
not how the mmu_interval_notifier was intended to be used, the overheads on
the pagefaulting path are similar to the existing hmm_mirror version.
Particularly since the interval tree will be small.

Link: https://lore.kernel.org/r/20191112202231.3856-10-jgg@ziepe.caTested-by: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

There is no reason to get the invalidate_range_start() callback via an
indirection through hmm_mirror, just register a normal notifier directly.

Link: https://lore.kernel.org/r/20191112202231.3856-9-jgg@ziepe.caTested-by: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

The new API is an exact match for the needs of radeon.

For some reason radeon tries to remove overlapping ranges from the
interval tree, but interval trees (and mmu_interval_notifier_insert())
support overlapping ranges directly. Simply delete all this code.

Since this driver is missing a invalidate_range_end callback, but
still calls get_user_pages(), it cannot be correct against all races.

Link: https://lore.kernel.org/r/20191112202231.3856-8-jgg@ziepe.caReviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

This converts one of the two users of mmu_notifiers to use the new API.
The conversion is fairly straightforward, however the existing use of
notifiers here seems to be racey.

Link: https://lore.kernel.org/r/20191112202231.3856-7-jgg@ziepe.caTested-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Replace the internal interval tree based mmu notifier with the new common
mmu_interval_notifier_insert() API. This removes a lot of code and fixes a
deadlock that can be triggered in ODP:

 zap_page_range()
  mmu_notifier_invalidate_range_start()
   [..]
    ib_umem_notifier_invalidate_range_start()
       down_read(&per_mm->umem_rwsem)
  unmap_single_vma()
    [..]
      __split_huge_page_pmd()
        mmu_notifier_invalidate_range_start()
        [..]
           ib_umem_notifier_invalidate_range_start()
              down_read(&per_mm->umem_rwsem)   // DEADLOCK

        mmu_notifier_invalidate_range_end()
           up_read(&per_mm->umem_rwsem)
  mmu_notifier_invalidate_range_end()
     up_read(&per_mm->umem_rwsem)

The umem_rwsem is held across the range_start/end as the ODP algorithm for
invalidate_range_end cannot tolerate changes to the interval
tree. However, due to the nested invalidation regions the second
down_read() can deadlock if there are competing writers. The new core code
provides an alternative scheme to solve this problem.

Fixes: ca748c39 ("RDMA/umem: Get rid of per_mm->notifier_count")
Link: https://lore.kernel.org/r/20191112202231.3856-6-jgg@ziepe.caTested-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Only the function calls are stubbed out with static inlines that always
fail. This is the standard way to write a header for an optional component
and makes it easier for drivers that only optionally need HMM_MIRROR.

Link: https://lore.kernel.org/r/20191112202231.3856-5-jgg@ziepe.caReviewed-by: Jérôme Glisse <jglisse@redhat.com>
Tested-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

hmm_mirror's handling of ranges does not use a sequence count which
results in this bug:

         CPU0                                   CPU1
                                     hmm_range_wait_until_valid(range)
                                         valid == true
                                     hmm_range_fault(range)
hmm_invalidate_range_start()
   range->valid = false
hmm_invalidate_range_end()
   range->valid = true
                                     hmm_range_valid(range)
                                          valid == true

Where the hmm_range_valid() should not have succeeded.

Adding the required sequence count would make it nearly identical to the
new mmu_interval_notifier. Instead replace the hmm_mirror stuff with
mmu_interval_notifier.

Co-existence of the two APIs is the first step.

Link: https://lore.kernel.org/r/20191112202231.3856-4-jgg@ziepe.caReviewed-by: Jérôme Glisse <jglisse@redhat.com>
Tested-by: Philip Yang <Philip.Yang@amd.com>
Tested-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Of the 13 users of mmu_notifiers, 8 of them use only
invalidate_range_start/end() and immediately intersect the
mmu_notifier_range with some kind of internal list of VAs.  4 use an
interval tree (i915_gem, radeon_mn, umem_odp, hfi1). 4 use a linked list
of some kind (scif_dma, vhost, gntdev, hmm)

And the remaining 5 either don't use invalidate_range_start() or do some
special thing with it.

It turns out that building a correct scheme with an interval tree is
pretty complicated, particularly if the use case is synchronizing against
another thread doing get_user_pages().  Many of these implementations have
various subtle and difficult to fix races.

This approach puts the interval tree as common code at the top of the mmu
notifier call tree and implements a shareable locking scheme.

It includes:
 - An interval tree tracking VA ranges, with per-range callbacks
 - A read/write locking scheme for the interval tree that avoids
   sleeping in the notifier path (for OOM killer)
 - A sequence counter based collision-retry locking scheme to tell
   device page fault that a VA range is being concurrently invalidated.

This is based on various ideas:
- hmm accumulates invalidated VA ranges and releases them when all
  invalidates are done, via active_invalidate_ranges count.
  This approach avoids having to intersect the interval tree twice (as
  umem_odp does) at the potential cost of a longer device page fault.

- kvm/umem_odp use a sequence counter to drive the collision retry,
  via invalidate_seq

- a deferred work todo list on unlock scheme like RTNL, via deferred_list.
  This makes adding/removing interval tree members more deterministic

- seqlock, except this version makes the seqlock idea multi-holder on the
  write side by protecting it with active_invalidate_ranges and a spinlock

To minimize MM overhead when only the interval tree is being used, the
entire SRCU and hlist overheads are dropped using some simple
branches. Similarly the interval tree overhead is dropped when in hlist
mode.

The overhead from the mandatory spinlock is broadly the same as most of
existing users which already had a lock (or two) of some sort on the
invalidation path.

Link: https://lore.kernel.org/r/20191112202231.3856-3-jgg@ziepe.caAcked-by: Christian König <christian.koenig@amd.com>
Tested-by: Philip Yang <Philip.Yang@amd.com>
Tested-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Now that we have KERNEL_HEADER_TEST all headers are generally compile
tested, so relying on makefile tricks to avoid compiling code that depends
on CONFIG_MMU_NOTIFIER is more annoying.

Instead follow the usual pattern and provide most of the header with only
the functions stubbed out when CONFIG_MMU_NOTIFIER is disabled. This
ensures code compiles no matter what the config setting is.

While here, struct mmu_notifier_mm is private to mmu_notifier.c, move it.

Link: https://lore.kernel.org/r/20191112202231.3856-2-jgg@ziepe.caReviewed-by: Jérôme Glisse <jglisse@redhat.com>
Tested-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

This branch is shared with the rdma.git for dependencies in following
patches:

====================
In order to hoist the interval tree code out of the drivers and into the
mmu_notifiers it is necessary for the drivers to not use the interval tree
for other things.

This series replaces the interval tree with an xarray and along the way
re-aligns all the locking to use a sensible SRCU model where the 'update'
step is done by modifying an xarray.

The result is overall much simpler and with less locking in the critical
path. Many functions were reworked for clarity and small details like
using 'imr' to refer to the implicit MR make the entire code flow here
more readable.

This also squashes at least two race bugs on its own, and quite possibily
more that haven't been identified.
====================

* branch 'odp_rework':
  RDMA/odp: Remove broken debugging call to invalidate_range
  RDMA/mlx5: Do not race with mlx5_ib_invalidate_range during create and destroy
  RDMA/mlx5: Do not store implicit children in the odp_mkeys xarray
  RDMA/mlx5: Rework implicit ODP destroy
  RDMA/mlx5: Avoid double lookups on the pagefault path
  RDMA/mlx5: Reduce locking in implicit_mr_get_data()
  RDMA/mlx5: Use an xarray for the children of an implicit ODP
  RDMA/mlx5: Split implicit handling from pagefault_mr
  RDMA/mlx5: Set the HW IOVA of the child MRs to their place in the tree
  RDMA/mlx5: Lift implicit_mr_alloc() into the two routines that call it
  RDMA/mlx5: Rework implicit_mr_get_data
  RDMA/mlx5: Delete struct mlx5_priv->mkey_table
  RDMA/mlx5: Use a dedicated mkey xarray for ODP
  RDMA/mlx5: Split sig_err MR data into its own xarray
  RDMA/mlx5: Use SRCU properly in ODP prefetch

If a device driver like nouveau tries to use hmm_range_fault() to access
the special shared zero page in system memory, hmm_range_fault() will
return -EFAULT and kill the process.

Allow hmm_range_fault() to return success (0) when the CPU pagetable entry
points to the special shared zero page.

page_to_pfn() and pfn_to_page() are defined on the zero page so just
handle it like any other page.

Link: https://lore.kernel.org/r/20191023195515.13168-3-rcampbell@nvidia.comSigned-off-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: "Jérôme Glisse" <jglisse@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

invalidate_range() also obtains the umem_mutex which is being held at this
point, so if this path were was ever called it would deadlock. Thus
conclude the debugging never triggers and rework it into a simple WARN_ON
and leave things as they are.

While here add a note to explain how we could possibly get inconsistent
page pointers.

Link: https://lore.kernel.org/r/20191009160934.3143-16-jgg@ziepe.caSigned-off-by: Jason Gunthorpe <jgg@mellanox.com>

For creation, as soon as the umem_odp is created the notifier can be
called, however the underlying MR may not have been setup yet. This would
cause problems if mlx5_ib_invalidate_range() runs. There is some
confusing/ulocked/racy code that might by trying to solve this, but
without locks it isn't going to work right.

Instead trivially solve the problem by short-circuiting the invalidation
if there are not yet any DMA mapped pages. By definition there is nothing
to invalidate in this case.

The create code will have the umem fully setup before anything is DMA
mapped, and npages is fully locked by the umem_mutex.

For destroy, invalidate the entire MR at the HW to stop DMA then DMA unmap
the pages before destroying the MR. This drives npages to zero and
prevents similar racing with invalidate while the MR is undergoing
destruction.

Arguably it would be better if the umem was created after the MR and
destroyed before, but that would require a big rework of the MR code.

Fixes: 6aec21f6 ("IB/mlx5: Page faults handling infrastructure")
Link: https://lore.kernel.org/r/20191009160934.3143-15-jgg@ziepe.caReviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

These mkeys are entirely internal and are never used by the HW for
page fault. They should also never be used by userspace for prefetch.
Simplify & optimize things by not including them in the xarray.

Since the prefetch path can now never see a child mkey there is no need
for the second synchronize_srcu() during imr destroy.

Link: https://lore.kernel.org/r/20191009160934.3143-14-jgg@ziepe.caReviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Use SRCU in a sensible way by removing all MRs in the implicit tree from
the two xarrays (the update operation), then a synchronize, followed by a
normal single threaded teardown.

This is only a little unusual from the normal pattern as there can still
be some work pending in the unbound wq that may also require a workqueue
flush. This is tracked with a single atomic, consolidating the redundant
existing atomics and wait queue.

For understand-ability the entire ODP implicit create/destroy flow now
largely exists in a single pair of functions within odp.c, with a few
support functions for tearing down an unused child.

Link: https://lore.kernel.org/r/20191009160934.3143-13-jgg@ziepe.caReviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Now that the locking is simplified combine pagefault_implicit_mr() with
implicit_mr_get_data() so that we sweep over the idx range only once,
and do the single xlt update at the end, after the child umems are
setup.

This avoids double iteration/xa_loads plus the sketchy failure path if the
xa_load() fails.

Link: https://lore.kernel.org/r/20191009160934.3143-12-jgg@ziepe.caReviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Now that the child MRs are stored in an xarray we can rely on the SRCU
lock to protect the xa_load and use xa_cmpxchg on the slow allocation path
to resolve races with concurrent page fault.

This reduces the scope of the critical section of umem_mutex for implicit
MRs to only cover mlx5_ib_update_xlt, and avoids taking a lock at all if
the child MR is already in the xarray. This makes it consistent with the
normal ODP MR critical section for umem_lock, and the locking approach
used for destroying an unusued implicit child MR.

The MLX5_IB_UPD_XLT_ATOMIC is no longer needed in implicit_get_child_mr()
since it is no longer called with any locks.

Link: https://lore.kernel.org/r/20191009160934.3143-11-jgg@ziepe.caReviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Currently the child leaves are stored in the shared interval tree and
every lookup for a child must be done under the interval tree rwsem.

This is further complicated by dropping the rwsem during iteration (ie the
odp_lookup(), odp_next() pattern), which requires a very tricky an
difficult to understand locking scheme with SRCU.

Instead reserve the interval tree for the exclusive use of the mmu
notifier related code in umem_odp.c and give each implicit MR a xarray
containing all the child MRs.

Since the size of each child is 1GB of VA, a 1 level xarray will index 64G
of VA, and a 2 level will index 2TB, making xarray a much better
data structure choice than an interval tree.

The locking properties of xarray will be used in the next patches to
rework the implicit ODP locking scheme into something simpler.

At this point, the xarray is locked by the implicit MR's umem_mutex, and
read can also be locked by the odp_srcu.

Link: https://lore.kernel.org/r/20191009160934.3143-10-jgg@ziepe.caReviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

The single routine has a very confusing scheme to advance to the next
child MR when working on an implicit parent. This scheme can only be used
when working with an implicit parent and must not be triggered when
working on a normal MR.

Re-arrange things by directly putting all the single-MR stuff into one
function and calling it in a loop for the implicit case. Simplify some of
the error handling in the new pagefault_real_mr() to remove unneeded gotos.

Link: https://lore.kernel.org/r/20191009160934.3143-9-jgg@ziepe.caReviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Instead of rewriting all the IOVA's to 0 as things progress down the tree
make the IOVA of the children equal to placement in the tree. This makes
things easier to understand by keeping mmkey.iova == HW configuration.

Link: https://lore.kernel.org/r/20191009160934.3143-8-jgg@ziepe.caReviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

This makes the routines easier to understand, particularly with respect
the locking requirements of the entire sequence. The implicit_mr_alloc()
had a lot of ifs specializing it to each of the callers, and only a very
small amount of code was actually shared.

Following patches will cause the flow in the two functions to diverge
further.

Link: https://lore.kernel.org/r/20191009160934.3143-7-jgg@ziepe.caReviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

This function is intended to loop across each MTT chunk in the implicit
parent that intersects the range [io_virt, io_virt+bnct).  But it is has a
confusing construction, so:

- Consistently use imr and odp_imr to refer to the implicit parent
  to avoid confusion with the normal mr and odp of the child
- Directly compute the inclusive start/end indexes by shifting. This is
  clearer to understand the intent and avoids any errors from unaligned
  values of addr
- Iterate directly over the range of MTT indexes, do not make a loop
  out of goto
- Follow 'success oriented flow', with goto error unwind
- Directly calculate the range of idx's that need update_xlt
- Ensure that any leaf MR added to the interval tree always results in an
  update to the XLT

Link: https://lore.kernel.org/r/20191009160934.3143-6-jgg@ziepe.caReviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

No users are left, delete it.

Link: https://lore.kernel.org/r/20191009160934.3143-5-jgg@ziepe.caReviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

There is a per device xarray storing mkeys that is used to store every
mkey in the system. However, this xarray is now only read by ODP for
certain ODP designated MRs (ODP, implicit ODP, MW, DEVX_INDIRECT).

Create an xarray only for use by ODP, that only contains ODP related
MKeys. This xarray is protected by SRCU and all erases are protected by a
synchronize.

This improves performance:

 - All MRs in the odp_mkeys xarray are ODP MRs, so some tests for is_odp()
   can be deleted. The xarray will also consume fewer nodes.

 - normal MR's are never mixed with ODP MRs in a SRCU data structure so
   performance sucking synchronize_srcu() on every MR destruction is not
   needed.

 - No smp_load_acquire(live) and xa_load() double barrier on read

Due to the SRCU locking scheme care must be taken with the placement of
the xa_store(). Once it completes the MR is immediately visible to other
threads and only through a xa_erase() & synchronize_srcu() cycle could it
be destroyed.

Link: https://lore.kernel.org/r/20191009160934.3143-4-jgg@ziepe.caReviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

The locking model for signature is completely different than ODP, do not
share the same xarray that relies on SRCU locking to support ODP.

Simply store the active mlx5_core_sig_ctx's in an xarray when signature
MRs are created and rely on trivial xarray locking to serialize
everything.

The overhead of storing only a handful of SIG related MRs is going to be
much less than an xarray full of every mkey.

Link: https://lore.kernel.org/r/20191009160934.3143-3-jgg@ziepe.caReviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

When working with SRCU protected xarrays the xarray itself should be the
SRCU 'update' point. Instead prefetch is using live as the SRCU update
point and this prevents switching the locking design to use the xarray
instead.

To solve this the prefetch must only read from the xarray once, and hold
on to the actual MR pointer for the duration of the async
operation. Incrementing num_pending_prefetch delays destruction of the MR,
so it is suitable.

Prefetch calls directly to the pagefault_mr using the MR pointer and only
does a single xarray lookup.

All the testing if a MR is prefetchable or not is now done only in the
prefetch code and removed from the pagefault critical path.

Link: https://lore.kernel.org/r/20191009160934.3143-2-jgg@ziepe.caReviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Pull x86 fixes from Thomas Gleixner:
 "Two fixes for the VMWare guest support:

   - Unbreak VMWare platform detection which got wreckaged by converting
     an integer constant to a string constant.

   - Fix the clang build of the VMWAre hypercall by explicitely
     specifying the ouput register for INL instead of using the short
     form"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/cpu/vmware: Fix platform detection VMWARE_PORT macro
  x86/cpu/vmware: Use the full form of INL in VMWARE_HYPERCALL, for clang/llvm

Pull timer fixes from Thomas Gleixner:
 "A small set of fixes for time(keeping):

   - Add a missing include to prevent compiler warnings.

   - Make the VDSO implementation of clock_getres() POSIX compliant
     again. A recent change dropped the NULL pointer guard which is
     required as NULL is a valid pointer value for this function.

   - Fix two function documentation typos"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  posix-cpu-timers: Fix two trivial comments
  timers/sched_clock: Include local timekeeping.h for missing declarations
  lib/vdso: Make clock_getres() POSIX compliant again

Pull perf fixes from Thomas Gleixner:
 "A set of perf fixes:

  kernel:

   - Unbreak the tracking of auxiliary buffer allocations which got
     imbalanced causing recource limit failures.

   - Fix the fallout of splitting of ToPA entries which missed to shift
     the base entry PA correctly.

   - Use the correct context to lookup the AUX event when unmapping the
     associated AUX buffer so the event can be stopped and the buffer
     reference dropped.

  tools:

   - Fix buildiid-cache mode setting in copyfile_mode_ns() when copying
     /proc/kcore

   - Fix freeing id arrays in the event list so the correct event is
     closed.

   - Sync sched.h anc kvm.h headers with the kernel sources.

   - Link jvmti against tools/lib/ctype.o to have weak strlcpy().

   - Fix multiple memory and file descriptor leaks, found by coverity in
     perf annotate.

   - Fix leaks in error handling paths in 'perf c2c', 'perf kmem', found
     by a static analysis tool"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/aux: Fix AUX output stopping
  perf/aux: Fix tracking of auxiliary trace buffer allocation
  perf/x86/intel/pt: Fix base for single entry topa
  perf kmem: Fix memory leak in compact_gfp_flags()
  tools headers UAPI: Sync sched.h with the kernel
  tools headers kvm: Sync kvm.h headers with the kernel sources
  tools headers kvm: Sync kvm headers with the kernel sources
  tools headers kvm: Sync kvm headers with the kernel sources
  perf c2c: Fix memory leak in build_cl_output()
  perf tools: Fix mode setting in copyfile_mode_ns()
  perf annotate: Fix multiple memory and file descriptor leaks
  perf tools: Fix resource leak of closedir() on the error paths
  perf evlist: Fix fix for freed id arrays
  perf jvmti: Link against tools/lib/ctype.h to have weak strlcpy()

Pull irq fixes from Thomas Gleixner:
 "Two fixes for interrupt controller drivers:

   - Skip IRQ_M_EXT entries in the device tree when initializing the
     RISCV PLIC controller to avoid a double init attempt.

   - Use the correct ITS list when issuing the VMOVP synchronization
     command so the operation works only on the ITS instances which are
     associated to a VM"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/sifive-plic: Skip contexts except supervisor in plic_init()
  irqchip/gic-v3-its: Use the exact ITSList for VMOVP

Pull cifs fixes from Steve French:
 "Seven cifs/smb3 fixes, including three for stable"

* tag '5.4-rc5-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: Fix cifsInodeInfo lock_sem deadlock when reconnect occurs
  CIFS: Fix use after free of file info structures
  CIFS: Fix retry mid list corruption on reconnects
  cifs: Fix missed free operations
  CIFS: avoid using MID 0xFFFF
  cifs: clarify comment about timestamp granularity for old servers
  cifs: Handle -EINPROGRESS only when noblockcnt is set

Pull RISC-V fixes from Paul Walmsley:
 "Several minor fixes and cleanups for v5.4-rc5:

   - Three build fixes for various SPARSEMEM-related kernel
     configurations

   - Two cleanup patches for the kernel bug and breakpoint trap handler
     code"

* tag 'riscv/for-v5.4-rc5-b' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: cleanup do_trap_break
  riscv: cleanup <asm/bug.h>
  riscv: Fix undefined reference to vmemmap_populate_basepages
  riscv: Fix implicit declaration of 'page_to_section'
  riscv: fix fs/proc/kcore.c compilation with sparsemem enabled

Pull MIPS fixes from Paul Burton:
 "A few MIPS fixes:

   - Fix VDSO time-related function behavior for systems where we need
     to fall back to syscalls, but were instead returning bogus results.

   - A fix to TLB exception handlers for Cavium Octeon systems where
     they would inadvertently clobber the $1/$at register.

   - A build fix for bcm63xx configurations.

   - Switch to using my @kernel.org email address"

* tag 'mips_fixes_5.4_3' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  MIPS: tlbex: Fix build_restore_pagemask KScratch restore
  MIPS: bmips: mark exception vectors as char arrays
  mips: vdso: Fix __arch_get_hw_counter()
  MAINTAINERS: Use @kernel.org address for Paul Burton

Pull tty/serial driver fix from Greg KH:
 "Here is a single tty/serial driver fix for 5.4-rc5 that resolves a
  reported issue.

  It has been in linux-next for a while with no problems"

* tag 'tty-5.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  8250-men-mcb: fix error checking when get_num_ports returns -ENODEV