The length of the called and calling address was not calculated
correctly (BCD encoding).
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

SFP standards are now available from the SNIA (Storage Networking
Industry Association) website.

Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Sabrina Dubroca says:

====================
fixes for XPS configuration after Symmetric queue selection

This fixes some bugs introduced by the "Symmetric queue selection
using XPS for Rx queues".

First, the refactoring of the cleanup function skipped resetting the
queue's NUMA node under some conditions.

Second, the accounting on static keys for XPS and RXQS-XPS is
unbalanced, so the static key for XPS won't actually disable itself,
once enabled. The RXQS-XPS static key can actually be disabled by
reconfiguring a device that didn't have RXQS-XPS configured at all.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 04157469 ("net: Use static_key for XPS maps") introduced a
static key for XPS, but the increments/decrements don't match.

First, the static key's counter is incremented once for each queue, but
only decremented once for a whole batch of queues, leading to large
unbalances.

Second, the xps_rxqs_needed key is decremented whenever we reset a batch
of queues, whether they had any rxqs mapping or not, so that if we setup
cpu-XPS on em1 and RXQS-XPS on em2, resetting the queues on em1 would
decrement the xps_rxqs_needed key.

This reworks the accounting scheme so that the xps_needed key is
incremented only once for each type of XPS for all the queues on a
device, and the xps_rxqs_needed key is incremented only once for all
queues. This is sufficient to let us retrieve queues via
get_xps_queue().

This patch introduces a new reset_xps_maps(), which reinitializes and
frees the appropriate map (xps_rxqs_map or xps_cpus_map), and drops a
reference to the needed keys:
 - both xps_needed and xps_rxqs_needed, in case of rxqs maps,
 - only xps_needed, in case of CPU maps.

Now, we also need to call reset_xps_maps() at the end of
__netif_set_xps_queue() when there's no active map left, for example
when writing '00000000,00000000' to all queues' xps_rxqs setting.

Fixes: 04157469 ("net: Use static_key for XPS maps")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Before commit 80d19669 ("net: Refactor XPS for CPUs and Rx queues"),
netif_reset_xps_queues() did netdev_queue_numa_node_write() for all the
queues being reset. Now, this is only done when the "active" variable in
clean_xps_maps() is false, ie when on all the CPUs, there's no active
XPS mapping left.

Fixes: 80d19669 ("net: Refactor XPS for CPUs and Rx queues")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

The link modes that sfp_parse_support() detects are stored in the
'modes' bitmap. There is no reason to make an exception for 1000Base-PX
or 1000Base-BX10.

Fixes: 03145864 ("sfp: support 1G BiDi (eg, FiberStore SFP-GE-BX) modules")
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

Kunihiko Hayashi says:

====================
fixup AVE ethernet driver

This series adds fixup for AVE ethernet driver that includes increse of
descriptors, replacing macro for linux-next, and adding missing author
information.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Add missing MODULE_AUTHOR of ave driver and an entry to MAINTAINERS.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In commit 26a4676f ("arm64: mm: define NET_IP_ALIGN to 0"),
AVE controller affects this modification because the controller forces
to ignore lower 2bits of buffer start address, and make 2-byte headroom,
that is, data reception starts from (buffer + 2).

This patch defines AVE_FRAME_HEADROOM macro as hardware-specific value,
and replaces NET_IP_ALIGN with it.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

To improve performance, this increases Rx descriptor to 256, Tx descriptor
to 64, and adjusts NAPI weight to NAPI_POLL_WEIGHT.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull networking fixes from David Miller:

 1) ARM64 JIT fixes for subprog handling from Daniel Borkmann.

 2) Various sparc64 JIT bug fixes (fused branch convergance, frame
    pointer usage detection logic, PSEODU call argument handling).

 3) Fix to use BH locking in nf_conncount, from Taehee Yoo.

 4) Fix race of TX skb freeing in ipheth driver, from Bernd Eckstein.

 5) Handle return value of TX NAPI completion properly in lan743x
    driver, from Bryan Whitehead.

 6) MAC filter deletion in i40e driver clears wrong state bit, from
    Lihong Yang.

 7) Fix use after free in rionet driver, from Pan Bian.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (53 commits)
  s390/qeth: fix length check in SNMP processing
  net: hisilicon: remove unexpected free_netdev
  rapidio/rionet: do not free skb before reading its length
  i40e: fix kerneldoc for xsk methods
  ixgbe: recognize 1000BaseLX SFP modules as 1Gbps
  i40e: Fix deletion of MAC filters
  igb: fix uninitialized variables
  netfilter: nf_tables: deactivate expressions in rule replecement routine
  lan743x: Enable driver to work with LAN7431
  tipc: fix lockdep warning during node delete
  lan743x: fix return value for lan743x_tx_napi_poll
  net: via: via-velocity: fix spelling mistake "alignement" -> "alignment"
  qed: fix spelling mistake "attnetion" -> "attention"
  net: thunderx: fix NULL pointer dereference in nic_remove
  sctp: increase sk_wmem_alloc when head->truesize is increased
  firestream: fix spelling mistake: "Inititing" -> "Initializing"
  net: phy: add workaround for issue where PHY driver doesn't bind to the device
  usbnet: ipheth: fix potential recvmsg bug and recvmsg bug 2
  sparc: Adjust bpf JIT prologue for PSEUDO calls.
  bpf, doc: add entries of who looks over which jits
  ...

Pull Xtensa fixes from Max Filippov:

 - fix kernel exception on userspace access to a currently disabled
   coprocessor

 - fix coprocessor data saving/restoring in configurations with multiple
   coprocessors

 - fix ptrace access to coprocessor data on configurations with multiple
   coprocessors with high alignment requirements

* tag 'xtensa-20181128' of git://github.com/jcmvbkbc/linux-xtensa:
  xtensa: fix coprocessor part of ptrace_{get,set}xregs
  xtensa: fix coprocessor context offset definitions
  xtensa: enable coprocessors that are being flushed

Jeff Kirsher says:

====================
Intel Wired LAN Driver Fixes 2018-11-28

This series contains fixes to igb, ixgbe and i40e.

Yunjian Wang from Huawei resolves a variable that could potentially be
NULL before it is used.

Lihong fixes an i40e issue which goes back to 4.17 kernels, where
deleting any of the MAC filters was causing the incorrect syncing for
the PF.

Josh Elsasser caught that there were missing enum values in the link
capabilities for x550 devices, which was preventing link for 1000BaseLX
SFP modules.

Jan fixes the function header comments for XSK methods.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The response for a SNMP request can consist of multiple parts, which
the cmd callback stages into a kernel buffer until all parts have been
received. If the callback detects that the staging buffer provides
insufficient space, it bails out with error.
This processing is buggy for the first part of the response - while it
initially checks for a length of 'data_len', it later copies an
additional amount of 'offsetof(struct qeth_snmp_cmd, data)' bytes.

Fix the calculation of 'data_len' for the first part of the response.
This also nicely cleans up the memcpy code.

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for net:

1) Disable BH while holding list spinlock in nf_conncount, from
   Taehee Yoo.

2) List corruption in nf_conncount, also from Taehee.

3) Fix race that results in leaving around an empty list node in
   nf_conncount, from Taehee Yoo.

4) Proper chain handling for inactive chains from the commit path,
   from Florian Westphal. This includes a selftest for this.

5) Do duplicate rule handles when replacing rules, also from Florian.

6) Remove net_exit path in xt_RATEEST that results in splat, from Taehee.

7) Possible use-after-free in nft_compat when releasing extensions.
   From Florian.

8) Memory leak in xt_hashlimit, from Taehee.

9) Call ip_vs_dst_notifier after ipv6_dev_notf, from Xin Long.

10) Fix cttimeout with udplite and gre, from Florian.

11) Preserve oif for IPv6 link-local generated traffic from mangle
    table, from Alin Nastac.

12) Missing error handling in masquerade notifiers, from Taehee Yoo.

13) Use mutex to protect registration/unregistration of masquerade
    extensions in order to prevent a race, from Taehee.

14) Incorrect condition check in tree_nodes_free(), also from Taehee.

15) Fix chain counter leak in rule replacement path, from Taehee.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The net device ndev is freed via free_netdev when failing to register
the device. The control flow then jumps to the error handling code
block. ndev is used and freed again. Resulting in a use-after-free bug.
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

skb is freed via dev_kfree_skb_any, however, skb->len is read then. This
may result in a use-after-free bug.

Fixes: e6161d64 ("rapidio/rionet: rework driver initialization and removal")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

One method, xsk_umem_setup, had an incorrect kernel doc
description, which has been corrected.

Also fixes small typos found in the comments.
Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Pull btrfs fixes from David Sterba:
 "Some of these bugs are being hit during testing so we'd like to get
  them merged, otherwise there are usual stability fixes for stable
  trees"

* tag 'for-4.20-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: relocation: set trans to be NULL after ending transaction
  Btrfs: fix race between enabling quotas and subvolume creation
  Btrfs: send, fix infinite loop due to directory rename dependencies
  Btrfs: ensure path name is null terminated at btrfs_control_ioctl
  Btrfs: fix rare chances for data loss when doing a fast fsync
  btrfs: Always try all copies when reading extent buffers

Pull spi fixes from Mark Brown:
 "A few driver specific fixes here, nothing big or that stands out for
  anyone other than the driver users.

  The omap2-mcspi fix is for issues that started showing up with a
  change in defconfig in this release to make cpuidle get turned on by
  default"

* tag 'spi-fix-v4.20-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: omap2-mcspi: Add missing suspend and resume calls
  spi: mediatek: use correct mata->xfer_len when in fifo transfer
  spi: uniphier: fix incorrect property items

Add the two 1000BaseLX enum values to the X550's check for 1Gbps modules,
allowing the core driver code to establish a link over this SFP type.

This is done by the out-of-tree driver but the fix wasn't in mainline.

Fixes: e23f3336 ("ixgbe: Fix 1G and 10G link stability for X550EM_x SFP+”)
Fixes: 6a14ee0c ("ixgbe: Add X550 support function pointers")
Signed-off-by: Josh Elsasser <jelsasser@appneta.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Pull kvm fixes from Paolo Bonzini:
 "Bugfixes, many of them reported by syzkaller and mostly predating the
  merge window"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  kvm: svm: Ensure an IBPB on all affected CPUs when freeing a vmcb
  kvm: mmu: Fix race in emulated page table writes
  KVM: nVMX: vmcs12 revision_id is always VMCS12_REVISION even when copied from eVMCS
  KVM: nVMX: Verify eVMCS revision id match supported eVMCS version on eVMCS VMPTRLD
  KVM: nVMX/nSVM: Fix bug which sets vcpu->arch.tsc_offset to L1 tsc_offset
  x86/kvm/vmx: fix old-style function declaration
  KVM: x86: fix empty-body warnings
  KVM: VMX: Update shared MSRs to be saved/restored on MSR_EFER.LMA changes
  KVM: x86: Fix kernel info-leak in KVM_HC_CLOCK_PAIRING hypercall
  KVM: nVMX: Fix kernel info-leak when enabling KVM_CAP_HYPERV_ENLIGHTENED_VMCS more than once
  svm: Add mutex_lock to protect apic_access_page_done on AMD systems
  KVM: X86: Fix scan ioapic use-before-initialization
  KVM: LAPIC: Fix pv ipis use-before-initialization
  KVM: VMX: re-add ple_gap module parameter
  KVM: PPC: Book3S HV: Fix handling for interrupted H_ENTER_NESTED

In __i40e_del_filter function, the flag __I40E_MACVLAN_SYNC_PENDING for
the PF state is wrongly set for the VSI. Deleting any of the MAC filters
has caused the incorrect syncing for the PF. Fix it by setting this state
flag to the intended PF.

CC: stable <stable@vger.kernel.org>
Signed-off-by: Lihong Yang <lihong.yang@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch fixes the variable 'phy_word' may be used uninitialized.
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

There is no expression deactivation call from the rule replacement path,
hence, chain counter is not decremented. A few steps to reproduce the
problem:

   %nft add table ip filter
   %nft add chain ip filter c1
   %nft add chain ip filter c1
   %nft add rule ip filter c1 jump c2
   %nft replace rule ip filter c1 handle 3 accept
   %nft flush ruleset

<jump c2> expression means immediate NFT_JUMP to chain c2.
Reference count of chain c2 is increased when the rule is added.

When rule is deleted or replaced, the reference counter of c2 should be
decreased via nft_rule_expr_deactivate() which calls
nft_immediate_deactivate().

Splat looks like:
[  214.396453] WARNING: CPU: 1 PID: 21 at net/netfilter/nf_tables_api.c:1432 nf_tables_chain_destroy.isra.38+0x2f9/0x3a0 [nf_tables]
[  214.398983] Modules linked in: nf_tables nfnetlink
[  214.398983] CPU: 1 PID: 21 Comm: kworker/1:1 Not tainted 4.20.0-rc2+ #44
[  214.398983] Workqueue: events nf_tables_trans_destroy_work [nf_tables]
[  214.398983] RIP: 0010:nf_tables_chain_destroy.isra.38+0x2f9/0x3a0 [nf_tables]
[  214.398983] Code: 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 8e 00 00 00 48 8b 7b 58 e8 e1 2c 4e c6 48 89 df e8 d9 2c 4e c6 eb 9a <0f> 0b eb 96 0f 0b e9 7e fe ff ff e8 a7 7e 4e c6 e9 a4 fe ff ff e8
[  214.398983] RSP: 0018:ffff8881152874e8 EFLAGS: 00010202
[  214.398983] RAX: 0000000000000001 RBX: ffff88810ef9fc28 RCX: ffff8881152876f0
[  214.398983] RDX: dffffc0000000000 RSI: 1ffff11022a50ede RDI: ffff88810ef9fc78
[  214.398983] RBP: 1ffff11022a50e9d R08: 0000000080000000 R09: 0000000000000000
[  214.398983] R10: 0000000000000000 R11: 0000000000000000 R12: 1ffff11022a50eba
[  214.398983] R13: ffff888114446e08 R14: ffff8881152876f0 R15: ffffed1022a50ed6
[  214.398983] FS:  0000000000000000(0000) GS:ffff888116400000(0000) knlGS:0000000000000000
[  214.398983] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  214.398983] CR2: 00007fab9bb5f868 CR3: 000000012aa16000 CR4: 00000000001006e0
[  214.398983] Call Trace:
[  214.398983]  ? nf_tables_table_destroy.isra.37+0x100/0x100 [nf_tables]
[  214.398983]  ? __kasan_slab_free+0x145/0x180
[  214.398983]  ? nf_tables_trans_destroy_work+0x439/0x830 [nf_tables]
[  214.398983]  ? kfree+0xdb/0x280
[  214.398983]  nf_tables_trans_destroy_work+0x5f5/0x830 [nf_tables]
[ ... ]

Fixes: bb7b40ae ("netfilter: nf_tables: bogus EBUSY in chain deletions")
Reported by: Christoph Anton Mitterer <calestyo@scientia.net>
Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=914505
Link: https://bugzilla.kernel.org/show_bug.cgi?id=201791Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

This driver was designed to work with both LAN7430 and LAN7431.
The only difference between the two is the LAN7431 has support
for external phy.

This change adds LAN7431 to the list of recognized devices
supported by this driver.

Updates for v2:
    changed 'fixes' tag to match defined format

fixes: 23f0703c ("lan743x: Add main source files for new lan743x driver")
Signed-off-by: Bryan Whitehead <Bryan.Whitehead@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We see the following lockdep warning:

[ 2284.078521] ======================================================
[ 2284.078604] WARNING: possible circular locking dependency detected
[ 2284.078604] 4.19.0+ #42 Tainted: G            E
[ 2284.078604] ------------------------------------------------------
[ 2284.078604] rmmod/254 is trying to acquire lock:
[ 2284.078604] 00000000acd94e28 ((&n->timer)#2){+.-.}, at: del_timer_sync+0x5/0xa0
[ 2284.078604]
[ 2284.078604] but task is already holding lock:
[ 2284.078604] 00000000f997afc0 (&(&tn->node_list_lock)->rlock){+.-.}, at: tipc_node_stop+0xac/0x190 [tipc]
[ 2284.078604]
[ 2284.078604] which lock already depends on the new lock.
[ 2284.078604]
[ 2284.078604]
[ 2284.078604] the existing dependency chain (in reverse order) is:
[ 2284.078604]
[ 2284.078604] -> #1 (&(&tn->node_list_lock)->rlock){+.-.}:
[ 2284.078604]        tipc_node_timeout+0x20a/0x330 [tipc]
[ 2284.078604]        call_timer_fn+0xa1/0x280
[ 2284.078604]        run_timer_softirq+0x1f2/0x4d0
[ 2284.078604]        __do_softirq+0xfc/0x413
[ 2284.078604]        irq_exit+0xb5/0xc0
[ 2284.078604]        smp_apic_timer_interrupt+0xac/0x210
[ 2284.078604]        apic_timer_interrupt+0xf/0x20
[ 2284.078604]        default_idle+0x1c/0x140
[ 2284.078604]        do_idle+0x1bc/0x280
[ 2284.078604]        cpu_startup_entry+0x19/0x20
[ 2284.078604]        start_secondary+0x187/0x1c0
[ 2284.078604]        secondary_startup_64+0xa4/0xb0
[ 2284.078604]
[ 2284.078604] -> #0 ((&n->timer)#2){+.-.}:
[ 2284.078604]        del_timer_sync+0x34/0xa0
[ 2284.078604]        tipc_node_delete+0x1a/0x40 [tipc]
[ 2284.078604]        tipc_node_stop+0xcb/0x190 [tipc]
[ 2284.078604]        tipc_net_stop+0x154/0x170 [tipc]
[ 2284.078604]        tipc_exit_net+0x16/0x30 [tipc]
[ 2284.078604]        ops_exit_list.isra.8+0x36/0x70
[ 2284.078604]        unregister_pernet_operations+0x87/0xd0
[ 2284.078604]        unregister_pernet_subsys+0x1d/0x30
[ 2284.078604]        tipc_exit+0x11/0x6f2 [tipc]
[ 2284.078604]        __x64_sys_delete_module+0x1df/0x240
[ 2284.078604]        do_syscall_64+0x66/0x460
[ 2284.078604]        entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 2284.078604]
[ 2284.078604] other info that might help us debug this:
[ 2284.078604]
[ 2284.078604]  Possible unsafe locking scenario:
[ 2284.078604]
[ 2284.078604]        CPU0                    CPU1
[ 2284.078604]        ----                    ----
[ 2284.078604]   lock(&(&tn->node_list_lock)->rlock);
[ 2284.078604]                                lock((&n->timer)#2);
[ 2284.078604]                                lock(&(&tn->node_list_lock)->rlock);
[ 2284.078604]   lock((&n->timer)#2);
[ 2284.078604]
[ 2284.078604]  *** DEADLOCK ***
[ 2284.078604]
[ 2284.078604] 3 locks held by rmmod/254:
[ 2284.078604]  #0: 000000003368be9b (pernet_ops_rwsem){+.+.}, at: unregister_pernet_subsys+0x15/0x30
[ 2284.078604]  #1: 0000000046ed9c86 (rtnl_mutex){+.+.}, at: tipc_net_stop+0x144/0x170 [tipc]
[ 2284.078604]  #2: 00000000f997afc0 (&(&tn->node_list_lock)->rlock){+.-.}, at: tipc_node_stop+0xac/0x19
[...}

The reason is that the node timer handler sometimes needs to delete a
node which has been disconnected for too long. To do this, it grabs
the lock 'node_list_lock', which may at the same time be held by the
generic node cleanup function, tipc_node_stop(), during module removal.
Since the latter is calling del_timer_sync() inside the same lock, we
have a potential deadlock.

We fix this letting the timer cleanup function use spin_trylock()
instead of just spin_lock(), and when it fails to grab the lock it
just returns so that the timer handler can terminate its execution.
This is safe to do, since tipc_node_stop() anyway is about to
delete both the timer and the node instance.

Fixes: 6a939f36 ("tipc: Auto removal of peer down node instance")
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The lan743x driver, when under heavy traffic load, has been noticed
to sometimes hang, or cause a kernel panic.

Debugging reveals that the TX napi poll routine was returning
the wrong value, 'weight'. Most other drivers return 0.
And call napi_complete, instead of napi_complete_done.

Additionally when creating the tx napi poll routine.
Changed netif_napi_add, to netif_tx_napi_add.

Updates for v3:
    changed 'fixes' tag to match defined format

Updates for v2:
use napi_complete, instead of napi_complete_done in
    lan743x_tx_napi_poll
use netif_tx_napi_add, instead of netif_napi_add for
    registration of tx napi poll routine

fixes: 23f0703c ("lan743x: Add main source files for new lan743x driver")
Signed-off-by: Bryan Whitehead <Bryan.Whitehead@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The text in array velocity_gstrings contains a spelling mistake,
rename rx_frame_alignement_errors to rx_frame_alignment_errors.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The text in array s_igu_fifo_error_strs contains a spelling mistake,
fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix a possible NULL pointer dereference in nic_remove routine
removing the nicpf module if nic_probe fails.
The issue can be triggered with the following reproducer:

$rmmod nicvf
$rmmod nicpf

[  521.412008] Unable to handle kernel access to user memory outside uaccess routines at virtual address 0000000000000014
[  521.422777] Mem abort info:
[  521.425561]   ESR = 0x96000004
[  521.428624]   Exception class = DABT (current EL), IL = 32 bits
[  521.434535]   SET = 0, FnV = 0
[  521.437579]   EA = 0, S1PTW = 0
[  521.440730] Data abort info:
[  521.443603]   ISV = 0, ISS = 0x00000004
[  521.447431]   CM = 0, WnR = 0
[  521.450417] user pgtable: 4k pages, 48-bit VAs, pgdp = 0000000072a3da42
[  521.457022] [0000000000000014] pgd=0000000000000000
[  521.461916] Internal error: Oops: 96000004 [#1] SMP
[  521.511801] Hardware name: GIGABYTE H270-T70/MT70-HD0, BIOS T49 02/02/2018
[  521.518664] pstate: 80400005 (Nzcv daif +PAN -UAO)
[  521.523451] pc : nic_remove+0x24/0x88 [nicpf]
[  521.527808] lr : pci_device_remove+0x48/0xd8
[  521.532066] sp : ffff000013433cc0
[  521.535370] x29: ffff000013433cc0 x28: ffff810f6ac50000
[  521.540672] x27: 0000000000000000 x26: 0000000000000000
[  521.545974] x25: 0000000056000000 x24: 0000000000000015
[  521.551274] x23: ffff8007ff89a110 x22: ffff000001667070
[  521.556576] x21: ffff8007ffb170b0 x20: ffff8007ffb17000
[  521.561877] x19: 0000000000000000 x18: 0000000000000025
[  521.567178] x17: 0000000000000000 x16: 000000000000010ffc33ff98 x8 : 0000000000000000
[  521.593683] x7 : 0000000000000000 x6 : 0000000000000001
[  521.598983] x5 : 0000000000000002 x4 : 0000000000000003
[  521.604284] x3 : ffff8007ffb17184 x2 : ffff8007ffb17184
[  521.609585] x1 : ffff000001662118 x0 : ffff000008557be0
[  521.614887] Process rmmod (pid: 1897, stack limit = 0x00000000859535c3)
[  521.621490] Call trace:
[  521.623928]  nic_remove+0x24/0x88 [nicpf]
[  521.627927]  pci_device_remove+0x48/0xd8
[  521.631847]  device_release_driver_internal+0x1b0/0x248
[  521.637062]  driver_detach+0x50/0xc0
[  521.640628]  bus_remove_driver+0x60/0x100
[  521.644627]  driver_unregister+0x34/0x60
[  521.648538]  pci_unregister_driver+0x24/0xd8
[  521.652798]  nic_cleanup_module+0x14/0x111c [nicpf]
[  521.657672]  __arm64_sys_delete_module+0x150/0x218
[  521.662460]  el0_svc_handler+0x94/0x110
[  521.666287]  el0_svc+0x8/0xc
[  521.669160] Code: aa1e03e0 9102c295 d503201f f9404eb3 (b9401660)

Fixes: 4863dea3 ("net: Adding support for Cavium ThunderX network controller")
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

I changed to count sk_wmem_alloc by skb truesize instead of 1 to
fix the sk_wmem_alloc leak caused by later truesize's change in
xfrm in Commit 02968ccf ("sctp: count sk_wmem_alloc by skb
truesize in sctp_packet_transmit").

But I should have also increased sk_wmem_alloc when head->truesize
is increased in sctp_packet_gso_append() as xfrm does. Otherwise,
sctp gso packet will cause sk_wmem_alloc underflow.

Fixes: 02968ccf ("sctp: count sk_wmem_alloc by skb truesize in sctp_packet_transmit")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There are spelling mistakes in debug messages, fix them.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

After switching the r8169 driver to use phylib some user reported that
their network is broken. This was caused by the genphy PHY driver being
used instead of the dedicated PHY driver for the RTL8211B. Users
reported that loading the Realtek PHY driver module upfront fixes the
issue. See also this mail thread:
https://marc.info/?t=154279781800003&r=1&w=2
The issue is quite weird and the root cause seems to be somewhere in
the base driver core. The patch works around the issue and may be
removed once the actual issue is fixed.

The Fixes tag refers to the first reported occurrence of the issue.
The issue itself may have been existing much longer and it may affect
users of other network chips as well. Users typically will recognize
this issue only if their PHY stops working when being used with the
genphy driver.

Fixes: f1e911d5 ("r8169: add basic phylib support")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

The bug is not easily reproducable, as it may occur very infrequently
(we had machines with 20minutes heavy downloading before it occurred)
However, on a virual machine (VMWare on Windows 10 host) it occurred
pretty frequently (1-2 seconds after a speedtest was started)

dev->tx_skb mab be freed via dev_kfree_skb_irq on a callback
before it is set.

This causes the following problems:
- double free of the skb or potential memory leak
- in dmesg: 'recvmsg bug' and 'recvmsg bug 2' and eventually
  general protection fault

Example dmesg output:
[  134.841986] ------------[ cut here ]------------
[  134.841987] recvmsg bug: copied 9C24A555 seq 9C24B557 rcvnxt 9C25A6B3 fl 0
[  134.841993] WARNING: CPU: 7 PID: 2629 at /build/linux-hwe-On9fm7/linux-hwe-4.15.0/net/ipv4/tcp.c:1865 tcp_recvmsg+0x44d/0xab0
[  134.841994] Modules linked in: ipheth(OE) kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc aesni_intel aes_x86_64 crypto_simd glue_helper cryptd vmw_balloon intel_rapl_perf joydev input_leds serio_raw vmw_vsock_vmci_transport vsock shpchp i2c_piix4 mac_hid binfmt_misc vmw_vmci parport_pc ppdev lp parport autofs4 vmw_pvscsi vmxnet3 hid_generic usbhid hid vmwgfx ttm drm_kms_helper syscopyarea sysfillrect mptspi mptscsih sysimgblt ahci psmouse fb_sys_fops pata_acpi mptbase libahci e1000 drm scsi_transport_spi
[  134.842046] CPU: 7 PID: 2629 Comm: python Tainted: G        W  OE    4.15.0-34-generic #37~16.04.1-Ubuntu
[  134.842046] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 05/19/2017
[  134.842048] RIP: 0010:tcp_recvmsg+0x44d/0xab0
[  134.842048] RSP: 0018:ffffa6630422bcc8 EFLAGS: 00010286
[  134.842049] RAX: 0000000000000000 RBX: ffff997616f4f200 RCX: 0000000000000006
[  134.842049] RDX: 0000000000000007 RSI: 0000000000000082 RDI: ffff9976257d6490
[  134.842050] RBP: ffffa6630422bd98 R08: 0000000000000001 R09: 000000000004bba4
[  134.842050] R10: 0000000001e00c6f R11: 000000000004bba4 R12: ffff99760dee3000
[  134.842051] R13: 0000000000000000 R14: ffff99760dee3514 R15: 0000000000000000
[  134.842051] FS:  00007fe332347700(0000) GS:ffff9976257c0000(0000) knlGS:0000000000000000
[  134.842052] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  134.842053] CR2: 0000000001e41000 CR3: 000000020e9b4006 CR4: 00000000003606e0
[  134.842055] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  134.842055] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  134.842057] Call Trace:
[  134.842060]  ? aa_sk_perm+0x53/0x1a0
[  134.842064]  inet_recvmsg+0x51/0xc0
[  134.842066]  sock_recvmsg+0x43/0x50
[  134.842070]  SYSC_recvfrom+0xe4/0x160
[  134.842072]  ? __schedule+0x3de/0x8b0
[  134.842075]  ? ktime_get_ts64+0x4c/0xf0
[  134.842079]  SyS_recvfrom+0xe/0x10
[  134.842082]  do_syscall_64+0x73/0x130
[  134.842086]  entry_SYSCALL_64_after_hwframe+0x3d/0xa2
[  134.842086] RIP: 0033:0x7fe331f5a81d
[  134.842088] RSP: 002b:00007ffe8da98398 EFLAGS: 00000246 ORIG_RAX: 000000000000002d
[  134.842090] RAX: ffffffffffffffda RBX: ffffffffffffffff RCX: 00007fe331f5a81d
[  134.842094] RDX: 00000000000003fb RSI: 0000000001e00874 RDI: 0000000000000003
[  134.842095] RBP: 00007fe32f642c70 R08: 0000000000000000 R09: 0000000000000000
[  134.842097] R10: 0000000000000000 R11: 0000000000000246 R12: 00007fe332347698
[  134.842099] R13: 0000000001b7e0a0 R14: 0000000001e00874 R15: 0000000000000000
[  134.842103] Code: 24 fd ff ff e9 cc fe ff ff 48 89 d8 41 8b 8c 24 10 05 00 00 44 8b 45 80 48 c7 c7 08 bd 59 8b 48 89 85 68 ff ff ff e8 b3 c4 7d ff <0f> 0b 48 8b 85 68 ff ff ff e9 e9 fe ff ff 41 8b 8c 24 10 05 00
[  134.842126] ---[ end trace b7138fc08c83147f ]---
[  134.842144] general protection fault: 0000 [#1] SMP PTI
[  134.842145] Modules linked in: ipheth(OE) kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc aesni_intel aes_x86_64 crypto_simd glue_helper cryptd vmw_balloon intel_rapl_perf joydev input_leds serio_raw vmw_vsock_vmci_transport vsock shpchp i2c_piix4 mac_hid binfmt_misc vmw_vmci parport_pc ppdev lp parport autofs4 vmw_pvscsi vmxnet3 hid_generic usbhid hid vmwgfx ttm drm_kms_helper syscopyarea sysfillrect mptspi mptscsih sysimgblt ahci psmouse fb_sys_fops pata_acpi mptbase libahci e1000 drm scsi_transport_spi
[  134.842161] CPU: 7 PID: 2629 Comm: python Tainted: G        W  OE    4.15.0-34-generic #37~16.04.1-Ubuntu
[  134.842162] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 05/19/2017
[  134.842164] RIP: 0010:tcp_close+0x2c6/0x440
[  134.842165] RSP: 0018:ffffa6630422bde8 EFLAGS: 00010202
[  134.842167] RAX: 0000000000000000 RBX: ffff99760dee3000 RCX: 0000000180400034
[  134.842168] RDX: 5c4afd407207a6c4 RSI: ffffe868495bd300 RDI: ffff997616f4f200
[  134.842169] RBP: ffffa6630422be08 R08: 0000000016f4d401 R09: 0000000180400034
[  134.842169] R10: ffffa6630422bd98 R11: 0000000000000000 R12: 000000000000600c
[  134.842170] R13: 0000000000000000 R14: ffff99760dee30c8 R15: ffff9975bd44fe00
[  134.842171] FS:  00007fe332347700(0000) GS:ffff9976257c0000(0000) knlGS:0000000000000000
[  134.842173] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  134.842174] CR2: 0000000001e41000 CR3: 000000020e9b4006 CR4: 00000000003606e0
[  134.842177] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  134.842178] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  134.842179] Call Trace:
[  134.842181]  inet_release+0x42/0x70
[  134.842183]  __sock_release+0x42/0xb0
[  134.842184]  sock_close+0x15/0x20
[  134.842187]  __fput+0xea/0x220
[  134.842189]  ____fput+0xe/0x10
[  134.842191]  task_work_run+0x8a/0xb0
[  134.842193]  exit_to_usermode_loop+0xc4/0xd0
[  134.842195]  do_syscall_64+0xf4/0x130
[  134.842197]  entry_SYSCALL_64_after_hwframe+0x3d/0xa2
[  134.842197] RIP: 0033:0x7fe331f5a560
[  134.842198] RSP: 002b:00007ffe8da982e8 EFLAGS: 00000246 ORIG_RAX: 0000000000000003
[  134.842200] RAX: 0000000000000000 RBX: 00007fe32f642c70 RCX: 00007fe331f5a560
[  134.842201] RDX: 00000000008f5320 RSI: 0000000001cd4b50 RDI: 0000000000000003
[  134.842202] RBP: 00007fe32f6500f8 R08: 000000000000003c R09: 00000000009343c0
[  134.842203] R10: 0000000000000000 R11: 0000000000000246 R12: 00007fe32f6500d0
[  134.842204] R13: 00000000008f5320 R14: 00000000008f5320 R15: 0000000001cd4770
[  134.842205] Code: c8 00 00 00 45 31 e4 49 39 fe 75 4d eb 50 83 ab d8 00 00 00 01 48 8b 17 48 8b 47 08 48 c7 07 00 00 00 00 48 c7 47 08 00 00 00 00 <48> 89 42 08 48 89 10 0f b6 57 34 8b 47 2c 2b 47 28 83 e2 01 80
[  134.842226] RIP: tcp_close+0x2c6/0x440 RSP: ffffa6630422bde8
[  134.842227] ---[ end trace b7138fc08c831480 ]---

The proposed patch eliminates a potential racing condition.
Before, usb_submit_urb was called and _after_ that, the skb was attached
(dev->tx_skb). So, on a callback it was possible, however unlikely that the
skb was freed before it was set. That way (because dev->tx_skb was not set
to NULL after it was freed), it could happen that a skb from a earlier
transmission was freed a second time (and the skb we should have freed did
not get freed at all)

Now we free the skb directly in ipheth_tx(). It is not passed to the
callback anymore, eliminating the posibility of a double free of the same
skb. Depending on the retval of usb_submit_urb() we use dev_kfree_skb_any()
respectively dev_consume_skb_any() to free the skb.
Signed-off-by: Oliver Zweigle <Oliver.Zweigle@faro.com>
Signed-off-by: Bernd Eckstein <3ernd.Eckstein@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Daniel Borkmann says:

====================
pull-request: bpf 2018-11-27

The following pull-request contains BPF updates for your *net* tree.

The main changes are:

1) Fix several bugs in BPF sparc JIT, that is, convergence for fused
   branches, initialization of frame pointer register, and moving all
   arguments into output registers from input registers in prologue
   to fix BPF to BPF calls, from David.

2) Fix a bug in arm64 JIT for fetching BPF to BPF call addresses where
   they are not guaranteed to fit into imm field and therefore must be
   retrieved through prog aux data, from Daniel.

3) Explicitly add all JITs to MAINTAINERS file with developers able to
   help out in feature development, fixes, review, etc.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Previously, we only called indirect_branch_prediction_barrier on the
logical CPU that freed a vmcb. This function should be called on all
logical CPUs that last loaded the vmcb in question.

Fixes: 15d45071 ("KVM/x86: Add IBPB support")
Reported-by: Neel Natu <neelnatu@google.com>
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

When a guest page table is updated via an emulated write,
kvm_mmu_pte_write() is called to update the shadow PTE using the just
written guest PTE value. But if two emulated guest PTE writes happened
concurrently, it is possible that the guest PTE and the shadow PTE end
up being out of sync. Emulated writes do not mark the shadow page as
unsync-ed, so this inconsistency will not be resolved even by a guest TLB
flush (unless the page was marked as unsync-ed at some other point).

This is fixed by re-reading the current value of the guest PTE after the
MMU lock has been acquired instead of just using the value that was
written prior to calling kvm_mmu_pte_write().
Signed-off-by: Junaid Shahid <junaids@google.com>
Reviewed-by: Wanpeng Li <wanpengli@tencent.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

vmcs12 represents the per-CPU cache of L1 active vmcs12.

This cache can be loaded by one of the following:
1) Guest making a vmcs12 active by exeucting VMPTRLD
2) Guest specifying eVMCS in VP assist page and executing
VMLAUNCH/VMRESUME.

Either way, vmcs12 should have revision_id of VMCS12_REVISION.
Which is not equal to eVMCS revision_id which specifies used
VersionNumber of eVMCS struct (e.g. KVM_EVMCS_VERSION).

Specifically, this causes an issue in restoring a nested VM state
because vmx_set_nested_state() verifies that vmcs12->revision_id
is equal to VMCS12_REVISION which was not true in case vmcs12
was populated from an eVMCS by vmx_get_nested_state() which calls
copy_enlightened_to_vmcs12().
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

According to TLFS section 16.11.2 Enlightened VMCS, the first u32
field of eVMCS should specify eVMCS VersionNumber.

This version should be in the range of supported eVMCS versions exposed
to guest via CPUID.0x4000000A.EAX[0:15].
The range which KVM expose to guest in this CPUID field should be the
same as the value returned in vmcs_version by nested_enable_evmcs().

According to the above, eVMCS VMPTRLD should verify that version specified
in given eVMCS is in the supported range. However, current code
mistakenly verfies this field against VMCS12_REVISION.

One can also see that when KVM use eVMCS, it makes sure that
alloc_vmcs_cpu() sets allocated eVMCS revision_id to KVM_EVMCS_VERSION.

Obvious fix should just change eVMCS VMPTRLD to verify first u32 field
of eVMCS is equal to KVM_EVMCS_VERSION.
However, it turns out that Microsoft Hyper-V fails to comply to their
own invented interface: When Hyper-V use eVMCS, it just sets first u32
field of eVMCS to revision_id specified in MSR_IA32_VMX_BASIC (In our
case: VMCS12_REVISION). Instead of used eVMCS version number which is
one of the supported versions specified in CPUID.0x4000000A.EAX[0:15].
To overcome Hyper-V bug, we accept either a supported eVMCS version
or VMCS12_REVISION as valid values for first u32 field of eVMCS.

Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
Reviewed-by: Mark Kanda <mark.kanda@oracle.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>