- 30 Dec, 2011 25 commits
-
-
Greg Ungerer authored
The ColdFire MMU has separate read and write bits, unlike the Motorola m68k MMU which has a single read-only bit. Define a _PAGE_READWRITE value for the Motorola MMU, which is 0, so we can unconditionaly include that in the page table entry bits when setting up ioremapped pages. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Matt Waddel <mwaddel@yahoo.com> Acked-by: Kurt Mahan <kmahan@xmission.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
-
Greg Ungerer authored
The cache push and clear code only need to flush the branch cache on the write-through cache setup of the ColdFire V4e with MMU enabled. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Matt Waddel <mwaddel@yahoo.com> Acked-by: Kurt Mahan <kmahan@xmission.com>
-
Greg Ungerer authored
The existing ColdFire code (which is all non-mmu) for system call entry and exit uses the more modern tracehook_report_syscall_entry()/exit() into the ptrace code. Now that we are supporting ColdFire with MMU we need the same hooks for these. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Matt Waddel <mwaddel@yahoo.com> Acked-by: Kurt Mahan <kmahan@xmission.com>
-
Greg Ungerer authored
Add code to manage the context's of the ColdFire V4e MMU. This code is mostly taken from the Freescale 2.6.35 kernel BSP for MMU enabled ColdFire. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Matt Waddel <mwaddel@yahoo.com> Acked-by: Kurt Mahan <kmahan@xmission.com>
-
Greg Ungerer authored
Like the SUN3 hardware MMU the ColdFire MMU uses 8k pages. So we want our ELF page size alingment to also be 8k. Modify the ELF alignment setting. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Matt Waddel <mwaddel@yahoo.com> Acked-by: Kurt Mahan <kmahan@xmission.com>
-
Greg Ungerer authored
We use the ColdFire V4e MMU page size of 8KiB. Define PAGE_SHIFT appropriately. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Matt Waddel <mwaddel@yahoo.com> Acked-by: Kurt Mahan <kmahan@xmission.com>
-
Greg Ungerer authored
The ColdFire CPU configurations need PAGE_OFFSET_RAW set to the base of their RAM. It doesn't matter if they are running with the MMU enabled or disabled, it is always set to the base of RAM. We can keep the choices simple here and key of CONFIG_RAMBASE. If it is defined we are on a plaftorm (ColdFire or other non-MMU systems) which have a configurable RAM base, just use it. Reported-by: Alexander Stein <alexander.stein@systec-electronic.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Matt Waddel <mwaddel@yahoo.com> Acked-by: Kurt Mahan <kmahan@xmission.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
-
Greg Ungerer authored
The ColdFire V4e MMU is unlike any of the other m68k MMU hardware. It needs its own TLB flush support code. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Matt Waddel <mwaddel@yahoo.com> Acked-by: Kurt Mahan <kmahan@xmission.com>
-
Greg Ungerer authored
Modify the cache setup for the ColdFire 54xx parts when running with the MMU enabled. We want to map the peripheral register space (MBAR region) as non cacheable. And create an identity mapping for all of RAM for the kernel. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Matt Waddel <mwaddel@yahoo.com> Acked-by: Kurt Mahan <kmahan@xmission.com>
-
Greg Ungerer authored
Add code to deal with instruction, data and branch caches of the V4e ColdFire cores when they are running with the MMU enabled. This code is loosely based on Freescales changes for the caches of the V4e ColdFire in the 2.6.25 kernel BSP. That code was originally by Kurt Mahan <kmahan@freescale.com> (now <kmahan@xmission.com>). Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Matt Waddel <mwaddel@yahoo.com> Acked-by: Kurt Mahan <kmahan@xmission.com>
-
Greg Ungerer authored
Add code to traps.c to handle MMU exceptions for the ColdFire. Most of this code is from the 2.6.25 kernel BSP code released by Freescale. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Matt Waddel <mwaddel@yahoo.com> Acked-by: Kurt Mahan <kmahan@xmission.com>
-
Greg Ungerer authored
Define the page table size and attributes for the ColdFire V4e MMU. Also setup the vmalloc and kmap regions we will use. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Matt Waddel <mwaddel@yahoo.com> Acked-by: Kurt Mahan <kmahan@xmission.com>
-
Greg Ungerer authored
The ColdFire V4e MMU is nothing like any of the other m68k MMU's. So we need to create a set of definitions and support routines for the kernels paging functions. This is largely taken from Freescales BSP code for this (though it was a 2.6.25 kernel). I have cleaned it up alot from the original. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Matt Waddel <mwaddel@yahoo.com> Acked-by: Kurt Mahan <kmahan@xmission.com>
-
Greg Ungerer authored
Virtual memory m68k systems build with register a2 dedicated to being the current proc pointer (non-MMU don't do this). Add code to the ColdFire interrupt and exception processing to set this on entry, and at context switch time. We use the same GET_CURRENT() macro that MMU enabled code uses - modifying it so that the assembler is ColdFire clean. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Matt Waddel <mwaddel@yahoo.com> Acked-by: Kurt Mahan <kmahan@xmission.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
-
Greg Ungerer authored
Add code to the 54xx ColdFire CPU init to setup memory ready for the m68k paged memory start up. Some of the RAM variables that were specific to the non-mmu code paths now need to be used during this setup, so when CONFIG_MMU is enabled. Move these out of page_no.h and into page.h. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Matt Waddel <mwaddel@yahoo.com> Acked-by: Kurt Mahan <kmahan@xmission.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
-
Greg Ungerer authored
The 54xx ColdFire CPU family has an internal MMU. Up to now though we have only supported running on them with the MMU disabled. Add code to the 54xx ColdFire init sequence to initialize the bootmem used by the usual MMU m68k code for paging init. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Matt Waddel <mwaddel@yahoo.com> Acked-by: Kurt Mahan <kmahan@xmission.com>
-
Greg Ungerer authored
The ColdFire CPU family, and the original 68000, do not support separate address spaces like the other 680x0 CPU types. Modify the set_fs()/get_fs() functions and macros to use a thread_info addr_limit for address space checking. This is pretty much what all other architectures that do not support separate setable address spaces do. Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Matt Waddel <mwaddel@yahoo.com> Acked-by: Kurt Mahan <kmahan@xmission.com>
-
Greg Ungerer authored
Modify the user space access functions to support the ColdFire V4e cores running with MMU enabled. The ColdFire processors do not support the "moves" instruction used by the traditional 680x0 processors for moving data into and out of another address space. They only support the notion of a single address space, and you use the usual "move" instruction to access that. Create a new config symbol (CONFIG_CPU_HAS_ADDRESS_SPACES) to mark the CPU types that support separate address spaces, and thus also support the sfc/dfc registers and the "moves" instruction that go along with that. The code is almost identical for user space access, so lets just use a define to choose either the "move" or "moves" in the assembler code. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Matt Waddel <mwaddel@yahoo.com> Acked-by: Kurt Mahan <kmahan@xmission.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
-
Greg Ungerer authored
Add appropriate TASK_SIZE and TASK_UNMAPPED_BASE definitions for running on ColdFire V4e cores with MMU enabled. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Matt Waddel <mwaddel@yahoo.com> Acked-by: Kurt Mahan <kmahan@xmission.com>
-
Greg Ungerer authored
The interrupt handling support defines and code is not so much conditional on an MMU being present (CONFIG_MMU), as it is on which type of CPU we are building for. So make the code conditional on the CPU types instead. The current irq.h is mostly specific to the interrupt code for the 680x0 CPUs, so it should only be used for them. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Matt Waddel <mwaddel@yahoo.com> Acked-by: Kurt Mahan <kmahan@xmission.com>
-
Greg Ungerer authored
Basic register level definitions to support the internal MMU of the V4e ColdFire cores. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Matt Waddel <mwaddel@yahoo.com> Acked-by: Kurt Mahan <kmahan@xmission.com>
-
Greg Ungerer authored
Update the show_cpuinfo() code to display info about ColdFire cores. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Matt Waddel <mwaddel@yahoo.com> Acked-by: Kurt Mahan <kmahan@xmission.com>
-
Greg Ungerer authored
Create machine and CPU definitions to support the ColdFire CPU family members that have a virtual memory management unit. The ColdFire V4e core contains an MMU, and it is quite different to any other 68k family members. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Matt Waddel <mwaddel@yahoo.com> Acked-by: Kurt Mahan <kmahan@xmission.com>
-
Greg Ungerer authored
Compiling for the m68knommu/68328 Palm/Pilot target you get: LD vmlinux arch/m68k/platform/68328/head.o: In function `L3': (.text+0x170): undefined reference to `rom_length' "rom_length" is not used any longer by any of the m68knommu code. So remove it from here too. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
-
Greg Ungerer authored
Compiling for the m68knommu/68328 Palm/Pilot target you get: AS arch/m68k/platform/68328/head-pilot.o arch/m68k/platform/68328/head-pilot.S:37:23: fatal error: bootlogo.rh: No such file or directory The build for this target used to do a conversion on a C coded boot logo and include this in the head assembler code. This got broken by changes to the local Makefile. Clean all this up by just including the C coded boot logo struct in the C code. With the appropriate alignment attribute there is no difference to the way it can be used. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
-
- 24 Dec, 2011 15 commits
-
-
Greg Ungerer authored
The merge of m68knommu left the linker scripts a little disorganized. Some consistent naming and squashing two of scripts that just include others can simplify things a lot. So merge the two simple including scripts, and rename the nommu script to be consistent with the existing m68k linker scripts. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
-
Greg Ungerer authored
The code that used the anchor.h include file has long been removed from the kernel. Remove it too. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
-
Greg Ungerer authored
There is a race on reading the ColdFire slice timer current count and the total clock count so far. Interrupts are off, and we may have just missed getting a new timer wrap event interrupt. Check for this and adjust the cycle count and current read count accordingly. Also the slice timer counts down from the terminal count. So in read_clk() we need take the current clock count away from the terminal count. Reported-by: Alexander Stein <alexander.stein@systec-electronic.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
-
Greg Ungerer authored
Disbale the CPU cache really early in the ColdFire startup code. We set up some variables for RAM sizing and we want to make they stick in RAM. Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
-
Greg Ungerer authored
The traditional 68000 processors and the newer reduced instruction set ColdFire processors do not support the 32*32->64 multiply or the 64/32->32 divide instructions. This is not a difference based on the presence of a hardware MMU or not. Create a new config symbol to mark that a CPU type doesn't support the longer multiply/divide instructions. Use this then as a basis for using the fast 64bit based divide (in div64.h) and for linking in the extra libgcc functions that may be required (mulsi3, divsi3, etc). Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
-
Greg Ungerer authored
We have two implementations of the IP checksuming code for the m68k arch. One uses the more advanced instructions available in 68020 and above processors, the other uses the simpler instructions available on the original 68000 processors and the modern ColdFire processors. This simpler code is pretty much the same as the generic lib implementation of the IP csum functions. So lets just switch over to using that. That means we can completely remove the checksum_no.c file, and only have the local fast code used for the more complex 68k CPU family members. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
-
Greg Ungerer authored
There is no reason we can't make the saved fp registers the same for all m68k types and ColdFire. There is a little wasted space, but the code consistency and cleanliness is a big win. sigcontext.h is an exported header, but currently there is no in-mainline users of the !__uClinux__ and __mcoldfire__ case that this change effects. Even better this change actually makes this structure consistent with the out-of-mainline ColdFire/MMU code. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
-
Greg Ungerer authored
Commit 61619b12 ("m68k: merge mmu and non-mmu include/asm/entry.h files") made the trap entry code basically the same for mmu and non-mmu builds. This means we no longer need code to mark the stack frame as "system-call" type or other in the non-mmu trap handling entry points. This is done in the SAVE_ALL_INT macro now. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
-
Greg Ungerer authored
The non-MMU builds of m68k allow a fixed kernel boot command line to be configured at configure time. Allow this MMU builds as well. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
-
Greg Ungerer authored
Output a table of the kernel memory regions at boot time. This is taken directly from the ARM architecture code that does this. The table looks like this: Virtual kernel memory layout: vector : 0x00000000 - 0x00000400 ( 0 KiB) kmap : 0xd0000000 - 0xe0000000 ( 256 MiB) vmalloc : 0xc0000000 - 0xcfffffff ( 255 MiB) lowmem : 0x00000000 - 0x02000000 ( 32 MiB) .init : 0x00128000 - 0x00134000 ( 48 KiB) .text : 0x00020000 - 0x00118d54 ( 996 KiB) .data : 0x00118d60 - 0x00126000 ( 53 KiB) .bss : 0x00134000 - 0x001413e0 ( 53 KiB) This has been very useful while debugging the ColdFire virtual memory support code. But in general I think it is nice to know extacly where the kernel has layed everything out on boot. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
-
Greg Ungerer authored
The mach_gettod function pointer is only called from the time_no.c code. So move its actual definition to there too. It is currently in setup_no.c for no particularly good reason. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
-
Greg Ungerer authored
The selection of the CONFIG_GENERIC_ATOMIC64 option is not specific to the MMU being present and enabled. It is a property of certain CPU families. So select it based on those CPU types being selected. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
-
Greg Ungerer authored
Currently on m68k we have a comeplete thread_info structure stored inside of the thread_struct, and we also have it in the initial part of the kernel stack. Mostly the code currently uses the one inside of the thread_struct, only using the "task" pointer from the stack based one. This is wasteful and confusing, we should only have the single instance of thread_info inside the stack page. And this is the norm for all other architectures. This change makes m68k handle thread_info consistently on both MMU enabled and non-MMU setups. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
-
Greg Ungerer authored
We have a duplicate name and definition for the offset of the thread.info struct within the task struct in our asm-offsets.c code. Remove one of them, and consolidate to use a single define, TASK_INFO. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
-
Greg Ungerer authored
The init_task code can be the same for both mmu and non-mmu targets. None of the alignment carried out in the the current init_task code is necessary. The linker script takes care of aligning the init_thread structure to a THREAD SIZE boundary, and that is all we need. So use the init_task.c code for all target types, that makes m68k code consistent with what most other architectures do. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
-