- 10 Jan, 2017 11 commits
-
-
Andrey Smirnov authored
Add .dts file for rev. C of the board by factoring out commonalities into a shared include file (vf610-zii-dev-rev-b-c.dtsi) and deriving revision specific file from it (vf610-zii-dev-rev-b.dts and vf610-zii-dev-reb-c.dts). Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Stefan Agner <stefan@agner.ch> Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: andrew@lunn.ch Cc: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Cc: Nikita Yushchenko <nikita.yoush@cogentembedded.com> Cc: cphealy@gmail.com Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Andrey Smirnov authored
Remove pwm0grp since it is: a) Not referenced anywhere in the DTS file (unlike Tower board it is based on, this board does not use/expose FTM0) b) Configures PTB2 and PTB3 in a way that contradicts pinctrl-mdio-mux Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Stefan Agner <stefan@agner.ch> Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: andrew@lunn.ch Cc: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Cc: cphealy@gmail.com Tested-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Milo Kim authored
Use common board file and support SATA interface additionally. Specify the dtb file for i.MX6 build. Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Milo Kim <woogyom.kim@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Milo Kim authored
Common savageboard DT file is used for board support. Add the vendor name and specify the dtb file for i.MX6Q build. Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Milo Kim <woogyom.kim@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Milo Kim authored
* Memory memblock for DDR3 1GB * Regulator 3.3V for panel and backlight. * Display Enable HDMI and LVDS panel. Savageboard supports AVIC TM097TDH02 panel which is compatible with Hannstar HSD100PXN1, so reuse it. * Clock The commit d28be499 ("ARM: dts: imx6qdl-sabresd: Allow HDMI and LVDS to work simultaneously") is applied to support LVDS and HDMI output at the same time. * Pinmux Support eMMC, ethernet, gpio key for power button, I2C, PWM, SD card and UART. * Others Enable ethernet, UART1 debug, USB host, USDHC3 for microSD card and USDHC4 for built-in eMMC storage. Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Milo Kim <woogyom.kim@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Fabio Estevam authored
On imx53-qsb the TVE DAC regulator comes from: - LDO7 on the board with the Dialog DA9052 PMIC - VDAC on the board with the MC34708 PMIC Pass them in the 'dac-supply' node. While at it, remove the 'regulator-always-on/regulator-boot-on' properties as the TVE driver will properly handle it. Tested on a imx53-qsb board with a Dialog DA9052 PMIC. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Lukasz Majewski authored
This patch provides support for Liebherr's Monitor 6 board (abverrated as mccmon6) to Linux kernel. Signed-off-by: Lukasz Majewski <lukma@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Lukasz Majewski authored
This patch adds entry for LWN - the Liebherr-Werk Nenzing GmbH company to vendor-prefixes.txt file. Signed-off-by: Lukasz Majewski <lukma@denx.de> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Alexandre Belloni authored
The license text has been mangled at some point then copy pasted across multiple files. Restore it to what it should be. Note that this is not intended as a license change. Reviewed-by: Heiko Schocher <hs@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Afzal Mohammed <afzal.mohd.ma@gmail.com> Acked-by: Michael Trimarchi <michael@amarulasolutions.com> Acked-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Martin Kaiser authored
The DryIce block on i.MX25 chipset uses two interrupts: A normal and a security violation interrupt. Add the security violation interrupt to the list, it is optional. Signed-off-by: Martin Kaiser <martin@kaiser.cx> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Bai Ping authored
Add ocotp node for i.MX6UL SOC. Signed-off-by: Bai Ping <ping.bai@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
- 03 Jan, 2017 4 commits
-
-
Jagan Teki authored
Is.IoT MX6UL modules are system on module solutions manufactured by Engicam for IOT connectivity applications with following characteristics: CPU NXP i.MX6UL (G2) Cortex-A7@528 MHz RAM Up to 512 MB LvDDR3@800MT/s NAND 256MB (option) eMMC 4GB (option) LCD 18 bit parallel BT 2.1+EDR,Bluetooth 3.0, Bluetooth 4.1 (Bluetooth low energy) WLAN IEEE 802.11 b/g/n (single stream n) Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Jagan Teki authored
Engicam i.CoreM6 Dual and Quad SOM's use same dts file, hence update model name to add Dual and also added full mode decsription. Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Jagan Teki authored
i.CoreM6 DualLite/Solo modules are system on module solutions manufactured by Engicam with following characteristics: CPU NXP i.MX6 DL, 800MHz RAM 1GB, 32, 64 bit, DDR3-800/1066 NAND SLC,512MB Power supply Single 5V MAX LCD RES FULLHD and more info at http://www.engicam.com/en/products/embedded/som/standard/i-core-rqs-m6s-dl-d-q Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Fabio Estevam authored
Property 'anatop-enable-bit' does not exist, so just remove it. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
- 02 Jan, 2017 8 commits
-
-
Vladimir Zapolskiy authored
Since commit b36581df ("spi: imx: Using existing properties for chipselects") the device tree property 'fsl,spi-num-chipselects' is unused and it is already marked as obsolete in device tree binding documentation. Remove the property from the existing DTS files to avoid its reoccurence on copying. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Jörg Krause authored
Add simple-card support to SAIF0 and SAIF1. Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Fabio Estevam authored
imx6sx-udoo-neo has a KSZ8091 Ethernet PHY, which requires the reset signal to be low for at least 10ms. Pass the 'phy-reset-duration' property to reflect such requirement. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Gary Bisson authored
The bus format is therefore retrieved from the connected panel information. Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Christopher Spinrath authored
Enable the S/PDIF transceiver present on the cm-fx6 module. Signed-off-by: Christopher Spinrath <christopher.spinrath@rwth-aachen.de> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Tim Harvey authored
All of the Gateworks Ventana boards based on the IMX6 SoC except for the GW54xx use the LTC3676 PMIC. Add a device-tree node with interrupt support for this PMIC. Additionally remove the simple-bus notation in the regulator nodes and any fixed regulators that are provided by the PMIC. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Tim Harvey authored
The GW54xx revision E adds SPI via an off-board connector. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Fabio Estevam authored
Make CPU nodes consistent throughout the i.MX dts files, which also matches the description from ePAPR spec. This also fixes the following W=1 warning in some cases: Warning (unit_address_vs_reg): Node /cpus/cpu@0 has a unit name, but no reg property Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
- 01 Jan, 2017 2 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimmLinus Torvalds authored
Pull DAX updates from Dan Williams: "The completion of Jan's DAX work for 4.10. As I mentioned in the libnvdimm-for-4.10 pull request, these are some final fixes for the DAX dirty-cacheline-tracking invalidation work that was merged through the -mm, ext4, and xfs trees in -rc1. These patches were prepared prior to the merge window, but we waited for 4.10-rc1 to have a stable merge base after all the prerequisites were merged. Quoting Jan on the overall changes in these patches: "So I'd like all these 6 patches to go for rc2. The first three patches fix invalidation of exceptional DAX entries (a bug which is there for a long time) - without these patches data loss can occur on power failure even though user called fsync(2). The other three patches change locking of DAX faults so that ->iomap_begin() is called in a more relaxed locking context and we are safe to start a transaction there for ext4" These have received a build success notification from the kbuild robot, and pass the latest libnvdimm unit tests. There have not been any -next releases since -rc1, so they have not appeared there" * 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: ext4: Simplify DAX fault path dax: Call ->iomap_begin without entry lock during dax fault dax: Finish fault completely when loading holes dax: Avoid page invalidation races and unnecessary radix tree traversals mm: Invalidate DAX radix tree entries only if appropriate ext2: Return BH_New buffers for zeroed blocks
-
- 30 Dec, 2016 2 commits
-
-
git://git.lwn.net/linuxLinus Torvalds authored
Pull documentation fixes from Jonathan Corbet: "Two small fixes: - A merge error on my part broke the DocBook build. I've requisitioned one of tglx's frozen sharks for appropriate disciplinary action and resolved to be more careful about testing the DocBook stuff as long as it's still around. - Fix an error in unaligned-memory-access.txt" * tag 'docs-4.10-rc1-fix' of git://git.lwn.net/linux: Documentation/unaligned-memory-access.txt: fix incorrect comparison operator docs: Fix build failure
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
Pull crypto fix from Herbert Xu: "This fixes a boot failure on some platforms when crypto self test is enabled along with the new acomp interface" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: testmgr - Use heap buffer for acomp test input
-
- 29 Dec, 2016 2 commits
-
-
Olof Johansson authored
mm/filemap.c: In function 'clear_bit_unlock_is_negative_byte': mm/filemap.c:933:9: error: too few arguments to function 'test_bit' return test_bit(PG_waiters); ^~~~~~~~ Fixes: b91e1302 ('mm: optimize PageWaiters bit use for unlock_page()') Signed-off-by: Olof Johansson <olof@lixom.net> Brown-paper-bag-by: Linus Torvalds <dummy@duh.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
In commit 62906027 ("mm: add PageWaiters indicating tasks are waiting for a page bit") Nick Piggin made our page locking no longer unconditionally touch the hashed page waitqueue, which not only helps performance in general, but is particularly helpful on NUMA machines where the hashed wait queues can bounce around a lot. However, the "clear lock bit atomically and then test the waiters bit" sequence turns out to be much more expensive than it needs to be, because you get a nasty stall when trying to access the same word that just got updated atomically. On architectures where locking is done with LL/SC, this would be trivial to fix with a new primitive that clears one bit and tests another atomically, but that ends up not working on x86, where the only atomic operations that return the result end up being cmpxchg and xadd. The atomic bit operations return the old value of the same bit we changed, not the value of an unrelated bit. On x86, we could put the lock bit in the high bit of the byte, and use "xadd" with that bit (where the overflow ends up not touching other bits), and look at the other bits of the result. However, an even simpler model is to just use a regular atomic "and" to clear the lock bit, and then the sign bit in eflags will indicate the resulting state of the unrelated bit #7. So by moving the PageWaiters bit up to bit #7, we can atomically clear the lock bit and test the waiters bit on x86 too. And architectures with LL/SC (which is all the usual RISC suspects), the particular bit doesn't matter, so they are fine with this approach too. This avoids the extra access to the same atomic word, and thus avoids the costly stall at page unlock time. The only downside is that the interface ends up being a bit odd and specialized: clear a bit in a byte, and test the sign bit. Nick doesn't love the resulting name of the new primitive, but I'd rather make the name be descriptive and very clear about the limitation imposed by trying to work across all relevant architectures than make it be some generic thing that doesn't make the odd semantics explicit. So this introduces the new architecture primitive clear_bit_unlock_is_negative_byte(); and adds the trivial implementation for x86. We have a generic non-optimized fallback (that just does a "clear_bit()"+"test_bit(7)" combination) which can be overridden by any architecture that can do better. According to Nick, Power has the same hickup x86 has, for example, but some other architectures may not even care. All these optimizations mean that my page locking stress-test (which is just executing a lot of small short-lived shell scripts: "make test" in the git source tree) no longer makes our page locking look horribly bad. Before all these optimizations, just the unlock_page() costs were just over 3% of all CPU overhead on "make test". After this, it's down to 0.66%, so just a quarter of the cost it used to be. (The difference on NUMA is bigger, but there this micro-optimization is likely less noticeable, since the big issue on NUMA was not the accesses to 'struct page', but the waitqueue accesses that were already removed by Nick's earlier commit). Acked-by: Nick Piggin <npiggin@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Bob Peterson <rpeterso@redhat.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Andrew Lutomirski <luto@kernel.org> Cc: Andreas Gruenbacher <agruenba@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 28 Dec, 2016 2 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
Pull crypto fix from Herbert Xu: "This fixes a hash corruption bug in the marvell driver" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: marvell - Copy IVDIG before launching partial DMA ahash requests
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Various ipvlan fixes from Eric Dumazet and Mahesh Bandewar. The most important is to not assume the packet is RX just because the destination address matches that of the device. Such an assumption causes problems when an interface is put into loopback mode. 2) If we retry when creating a new tc entry (because we dropped the RTNL mutex in order to load a module, for example) we end up with -EAGAIN and then loop trying to replay the request. But we didn't reset some state when looping back to the top like this, and if another thread meanwhile inserted the same tc entry we were trying to, we re-link it creating an enless loop in the tc chain. Fix from Daniel Borkmann. 3) There are two different WRITE bits in the MDIO address register for the stmmac chip, depending upon the chip variant. Due to a bug we could set them both, fix from Hock Leong Kweh. 4) Fix mlx4 bug in XDP_TX handling, from Tariq Toukan. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: net: stmmac: fix incorrect bit set in gmac4 mdio addr register r8169: add support for RTL8168 series add-on card. net: xdp: remove unused bfp_warn_invalid_xdp_buffer() openvswitch: upcall: Fix vlan handling. ipv4: Namespaceify tcp_tw_reuse knob net: korina: Fix NAPI versus resources freeing net, sched: fix soft lockup in tc_classify net/mlx4_en: Fix user prio field in XDP forward tipc: don't send FIN message from connectionless socket ipvlan: fix multicast processing ipvlan: fix various issues in ipvlan_process_multicast()
-
- 27 Dec, 2016 9 commits
-
-
Cihangir Akturk authored
In the actual implementation ether_addr_equal function tests for equality to 0 when returning. It seems in commit 0d74c4 it is somehow overlooked to change this operator to reflect the actual function. Signed-off-by: Cihangir Akturk <cakturk@gmail.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
-
John Brooks authored
The 80211.tmpl DocBook file was removed in commit 819bf593 ("docs-rst: sphinxify 802.11 documentation"), but the 80211.xml target was re-added to the Makefile by commit 7ddedebb ("ALSA: doc: ReSTize writing-an-alsa-driver document"), leading to a failure when building the documentation: *** No rule to make target 'Documentation/DocBook/80211.xml', needed by 'Documentation/DocBook/80211.aux.xml'. cc: stable@vger.kernel.org Signed-off-by: John Brooks <john@fastquake.com> Mea-culpa-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
-
Jonathan Corbet authored
Linux 4.10-rc1
-
Kweh, Hock Leong authored
Fixing the gmac4 mdio write access to use MII_GMAC4_WRITE only instead of OR together with MII_WRITE. Signed-off-by: Kweh, Hock Leong <hock.leong.kweh@intel.com> Acked-By: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Chun-Hao Lin authored
This chip is the same as RTL8168, but its device id is 0x8161. Signed-off-by: Chun-Hao Lin <hau@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jason Wang authored
After commit 73b62bd0 ("virtio-net: remove the warning before XDP linearizing"), there's no users for bpf_warn_invalid_xdp_buffer(), so remove it. This is a revert for commit f23bc46c. Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
pravin shelar authored
Networking stack accelerate vlan tag handling by keeping topmost vlan header in skb. This works as long as packet remains in OVS datapath. But during OVS upcall vlan header is pushed on to the packet. When such packet is sent back to OVS datapath, core networking stack might not handle it correctly. Following patch avoids this issue by accelerating the vlan tag during flow key extract. This simplifies datapath by bringing uniform packet processing for packets from all code paths. Fixes: 5108bbad ("openvswitch: add processing of L3 packets"). CC: Jarno Rajahalme <jarno@ovn.org> CC: Jiri Benc <jbenc@redhat.com> Signed-off-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Haishuang Yan authored
Different namespaces might have different requirements to reuse TIME-WAIT sockets for new connections. This might be required in cases where different namespace applications are in place which require TIME_WAIT socket connections to be reduced independently of the host. Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Laura Abbott authored
Christopher Covington reported a crash on aarch64 on recent Fedora kernels: kernel BUG at ./include/linux/scatterlist.h:140! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP Modules linked in: CPU: 2 PID: 752 Comm: cryptomgr_test Not tainted 4.9.0-11815-ge93b1cc8 #162 Hardware name: linux,dummy-virt (DT) task: ffff80007c650080 task.stack: ffff800008910000 PC is at sg_init_one+0xa0/0xb8 LR is at sg_init_one+0x24/0xb8 ... [<ffff000008398db8>] sg_init_one+0xa0/0xb8 [<ffff000008350a44>] test_acomp+0x10c/0x438 [<ffff000008350e20>] alg_test_comp+0xb0/0x118 [<ffff00000834f28c>] alg_test+0x17c/0x2f0 [<ffff00000834c6a4>] cryptomgr_test+0x44/0x50 [<ffff0000080dac70>] kthread+0xf8/0x128 [<ffff000008082ec0>] ret_from_fork+0x10/0x50 The test vectors used for input are part of the kernel image. These inputs are passed as a buffer to sg_init_one which eventually blows up with BUG_ON(!virt_addr_valid(buf)). On arm64, virt_addr_valid returns false for the kernel image since virt_to_page will not return the correct page. Fix this by copying the input vectors to heap buffer before setting up the scatterlist. Reported-by: Christopher Covington <cov@codeaurora.org> Fixes: d7db7a88 ("crypto: acomp - update testmgr with support for acomp") Signed-off-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-