Add a new cpufreq_update_policy call:

Certain cpufreq policy notifers have different needs at different times.
Thus it needs to be possible to re-evaluate an already set cpufreq policy.
Note that the cpufreq policy should only be set by one person: the user.
Not any other in-kernel code [with one exception, of course: during
booting].

From: Hiroshi Miura <miura@da-cha.org>

Intel SpeedStep driver using a BIOS SMI call.

Quoting his original announcement:

"This driver is based on the information from

1. Microsoft Windows XP Document.
we can get the SMI interface values from ax=E980/int15 BIOS call.

2. Intel SpeedStep Applet Document.(from HP.com)
http://h18007.www1.hp.com/support/files/evonotebook/us/download/10631.html
" Adds code to request transition ownership when processing
the system critical resume message. When a critical hibernate occurs,
the Applet does not receive any system level notification. The change forces
the Applet to re-acquire transition ownership upon resume from a critical hibernate. "

This is informative. This saied that  something 'ownership' call is needed on SMI
interface first.

3. Grover, Andrew's int 15h patch posted to cpufreq ml
Message-ID: <F760B14C9561B941B89469F59BA3A847E96E28@orsmsx401.jf.intel.com>
code which call BIOS to get SMI values. I included it.

4. Malik Martin's rev engineering results.
call is made with BX, CX, EDI register values.
and need signature 'ISG' when call.
find function values. bx=1(get) and bx=2(set)

5. Marc Lehmann's 'speedstep' utility,
sample of assembler code to call SMI.

6. My work.
find function to return max/min freq which system supportd. (bx=4)
more values are gotten, but I cannot understand...
find 'ownership' function value(bx=0, which is other than 1 2 4..).

ToDo(in pregress)
support governor "auto" and using smi_event call, imprement auto freqchange
feature.
test on 440BX/ZX platform.

Memo
 module parameters are override result of an int 15h/eax=E890h call.
 these parameter value are gotten from Windows XP registory."

Also includes some bugfixes, updates and workarounds from me.

NB: A lot of BIOS out there are buggy. You might want to try this driver
also with Intel's default values -- smi_cmd = 0x82 and smi_port = 0xb2

Add template for Nehemiah.

The 'match voltage to frequency' routine is complete crap and needs
rewriting. (It also only works for a single stepping of C3)
I'll redo it when I find the specs again.
In the meantime, it doesn't work properly, so kill it.

These are currently unsupported, and I get quite a lot of mails
asking about it. Hopefully this will be a little more informative
than 'unknown CPU'.

this was wrong in several places by a factor of 100.
Introduce a calc_speed helper to make this harder to get wrong.
Additionally, clean up some printk's to print out useful values
like MinMult=3.5x instead of MinMult(x10)=35.

Also add a config option so that the default governor [which is loaded
and enabled at boot] is started. Note that if you select "performance"
here, the CPU will be set to the highest possible frequency even if
the CPU was booted at a lower frequency. If you select "userspace",
the frequency will stay the same.

Governors are for CPUfreq drivers which have a ->target callback,
Policies are for CPUfreq drivers which have a ->setpolicy callback.
Also, the "hardwired" governors "powersave" and "performance" are removed.

Module names of 'userspace' aren't very informative.

cpuferq hakcers cnat spel.

Also remove $Id$ tag.
No other code change.

This makes "allyesconfig" do a better job.

broken on SMP (due to expecting global irq locking).

From Andries Brouwer <aebr@win.tue.nl>: we discard the double
release keypress, but we did it without clearing the "last byte
was E0" flag. So the next byte in the input stream would get
corrupted.

- let more drivers that don't compile depend on BROKEN
- MTD_BLKMTD is fixed, remove the dependency on BROKEN
- let all drivers that don't compile on SMP (due to cli/sti usage)
  depend on a BROKEN_ON_SMP that is only defined if !SMP || BROKEN
- #include interrupt.h for dummy cli/sti/... in two files to fix the
  UP compilation of these files

I marked only drivers that are broken for a long time and where I don't 
know about existing fixes with BROKEN or BROKEN_ON_SMP.

into home.osdl.org:/home/torvalds/v2.5/linux

ide: forward-port siimage driver changes from 2.4.22

From: Benjamin Herrenschmidt <benh@kernel.crashing.org>

This patch seem to have been lost, so here it is again.  It fixes an Ooops
on unregistering hwifs due to the device model now having mandatory
release() functions.  It also close the possible race we had on release if
the entry was in use (by or /sys typically) by using a semaphore waiting
for the release() to be called after doing an unregister.

Include vmalloc.h to fix compilation of raw1394.c