- 19 Nov, 2016 2 commits
-
-
Jarno Rajahalme authored
Fix incorrent comment after the final #endif. Signed-off-by: Jarno Rajahalme <jarno@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jarno Rajahalme authored
No point storing the return value of virtio_net_hdr_to_skb() or virtio_net_hdr_from_skb() to a variable when the value is used only once as a boolean in an immediately following if statement. Signed-off-by: Jarno Rajahalme <jarno@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 18 Nov, 2016 33 commits
-
-
Hariprasad Shenai authored
Allocate resources dynamically for Upper layer driver's (ULD) like cxgbit, iw_cxgb4, cxgb4i and chcr. The resources allocated include Tx queues which are allocated when ULD register with cxgb4 driver and freed while un-registering. The Tx queues which are shared by ULD shall be allocated by first registering driver and un-allocated by last unregistering driver. Signed-off-by: Atul Gupta <atul.gupta@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dan Carpenter authored
We obviously intended a bitwise AND here, not a logical one. Fixes: 8c978d05 ("liquidio CN23XX: Mailbox support") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Woojung Huh authored
Relocate mdix code to phy driver to be called at config_init(). Signed-off-by: Woojung Huh <woojung.huh@microchip.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Florian Fainelli says: ==================== net: Enable COMPILE_TEST for Marvell & Freescale drivers This patch series allows building the Freescale and Marvell Ethernet network drivers with COMPILE_TEST. Changes in v4: - add proper HAS_DMA to fix build errors on m32r - provide an inline stub for mvebu_mbus_get_dram_win_info - added an additional patch to fix build errors with mv88e6xxx on m32r Changes in v3: - reorder patches to avoid introducing a build warning between commits Changes in v2: - rename register define clash when building for i386 (spotted by LKP) ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
Some architectures may not define IRQ_DOMAIN (like m32r), fixes undefined references to IRQ_DOMAIN functions. Fixes: dc30c35b ("net: dsa: mv88e6xxx: Implement interrupt support.") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
All Marvell Ethernet drivers actually build fine with COMPILE_TEST with a few warnings. We need to add a few HAS_DMA dependencies to fix linking failures on problematic architectures like m32r. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
In preparation for allowing CONFIG_MVNETA_BM to build with COMPILE_TEST, provide an inline stub for mvebu_mbus_get_dram_win_info(). Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
There are only a handful of Freescale Ethernet drivers that don't actually build with COMPILE_TEST: * FEC, for which we would need to define a default register layout if no supported architecture is defined * UCC_GETH which depends on PowerPC cpm.h header (which could be moved to a generic location) * GIANFAR needs to depend on HAS_DMA to fix linking failures on some architectures (like m32r) We need to fix an unmet dependency to get there though: warning: (FSL_XGMAC_MDIO) selects OF_MDIO which has unmet direct dependencies (OF && PHYLIB) which would result in CONFIG_OF_MDIO=[ym] without CONFIG_OF to be set. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
FS is a global symbol used by the x86 32-bit architecture, fixes builds re-definitions: >> drivers/net/ethernet/freescale/gianfar_ptp.c:75:0: warning: "FS" >> redefined #define FS (1<<28) /* FIPER start indication */ In file included from arch/x86/include/uapi/asm/ptrace.h:5:0, from arch/x86/include/asm/ptrace.h:6, from arch/x86/include/asm/math_emu.h:4, from arch/x86/include/asm/processor.h:11, from include/linux/mutex.h:19, from include/linux/kernfs.h:13, from include/linux/sysfs.h:15, from include/linux/kobject.h:21, from include/linux/device.h:17, from drivers/net/ethernet/freescale/gianfar_ptp.c:23: arch/x86/include/uapi/asm/ptrace-abi.h:15:0: note: this is the location of the previous definition #define FS 9 Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Lendacky, Thomas authored
Update the connection type enumeration for backplane mode and return an error when there is a mismatch between the mode and the connection type. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Allan W. Nielsen says: ==================== Adding PHY-Tunables and downshift support (This is a re-post of the v3 patch set with a new cover letter - I was not aware that the cover letters was used a commit comments in merge commits). This series add support for PHY tunables, and uses this facility to configure downshifting. The downshifting mechanism is implemented for MSCC phys. This series tries to address the comments provided back in mid October when this feature was posted along with fast-link-failure. Fast-link-failure has been separated out, but we would like to pick continue on that if/when we agree on how the phy-tunables and downshifting should be done. The proposed generic interface is similar to ETHTOOL_GTUNABLE/ETHTOOL_STUNABLE, it uses the same type (ethtool_tunable/tunable_type_id) but a new enum (phy_tunable_id) is added to reflect the PHY tunable. The implementation just call the newly added function pointers in get_tunable/set_tunable phy_device structure. To configure downshifting, the ethtool_tunable structure is used. 'id' must be set to 'ETHTOOL_PHY_DOWNSHIFT', 'type_id' must be set to 'ETHTOOL_TUNABLE_U8' and 'data' value configure the amount of downshift re-tries. If configured to DOWNSHIFT_DEV_DISABLE, then downshift is disabled If configured to DOWNSHIFT_DEV_DEFAULT_COUNT, then it is up to the device to choose a device-specific re-try count. Tested on Beaglebone Black with VSC 8531 PHY. Change set: v0: - Link Speed downshift and Fast Link failure-2 features coded by using Device tree. v1: - Split the Downshift and FLF2 features in different set of patches. - Removed DT access and implemented IOCTL access suggested by Andrew. - Added function pointers in get_tunable/set_tunable phy_device structure v2: - Added trace message with a hist is printed when downshifting clould not be eanbled with the requested count - (ethtool) Syntax is changed from "--set-phy-tunable downshift on|off|%d" to "--set-phy-tunable [downshift on|off [count N]]" - as requested by Andrew. v3: - Fixed Spelling in "net: phy: Add downshift get/set support in Microsemi PHYs driver" ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Raju Lakkaraju authored
Implements the phy tunable function pointers and implement downshift functionality for MSCC PHYs. Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microsemi.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Allan W. Nielsen <allan.nielsen@microsemi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Raju Lakkaraju authored
Adding validation support for the ETHTOOL_PHY_DOWNSHIFT. Functional implementation needs to be done in the individual PHY drivers. Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microsemi.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Allan W. Nielsen <allan.nielsen@microsemi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Raju Lakkaraju authored
For operation in cabling environments that are incompatible with 1000BASE-T, PHY device may provide an automatic link speed downshift operation. When enabled, the device automatically changes its 1000BASE-T auto-negotiation to the next slower speed after a configured number of failed attempts at 1000BASE-T. This feature is useful in setting up in networks using older cable installations that include only pairs A and B, and not pairs C and D. Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microsemi.com> Signed-off-by: Allan W. Nielsen <allan.nielsen@microsemi.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Raju Lakkaraju authored
Adding get_tunable/set_tunable function pointer to the phy_driver structure, and uses these function pointers to implement the ETHTOOL_PHY_GTUNABLE/ETHTOOL_PHY_STUNABLE ioctls. Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microsemi.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Allan W. Nielsen <allan.nielsen@microsemi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Raju Lakkaraju authored
Defines a generic API to get/set phy tunables. The API is using the existing ethtool_tunable/tunable_type_id types which is already being used for mac level tunables. Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microsemi.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Allan W. Nielsen <allan.nielsen@microsemi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Saeed Mahameed says: ==================== Mellanox 100G mlx5 update 2016-11-15 This series contains four humble mlx5 features. From Gal, - Add the support for PCIe statistics and expose them in ethtool From Huy, - Add the support for port module events reporting and statistics - Add the support for driver version setting into FW (for display purposes only) From Mohamad, - Extended the command interface cache flexibility This series was generated against commit 6a02f5eb ("Merge branch 'mlxsw-i2c") V2: - Changed plain "unsigned" to "unsigned int" ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Gal Pressman authored
This patch exposes two groups of PCIe counters: - Performance counters. - Timers and states counters. Queried with ethtool -S <devname>. Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Gal Pressman authored
Add the needed infrastructure for future use of MPCNT register. Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Huy Nguyen authored
If driver_version capability bit is enabled, set driver version to firmware after the init HCA command, for display purposes. Example of driver version: "Linux,mlx5_core,3.0-1" Signed-off-by: Huy Nguyen <huyn@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Saeed Mahameed authored
Add driver_version capability bit is enabled, and set driver version command in mlx5_ifc firmware header. The only purpose of this command is to store a driver version/OS string in FW to be reported and displayed in various management systems, such as IPMI/BMC. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Huy Nguyen <huyn@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Huy Nguyen authored
Add port module event counters to ethtool -S command Signed-off-by: Huy Nguyen <huyn@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Huy Nguyen authored
For each asynchronous port module event: 1. print with ratelimit to the dmesg log 2. increment the corresponding event counter Signed-off-by: Huy Nguyen <huyn@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Huy Nguyen authored
Add hardware structures and constants definitions needed for module events support. Signed-off-by: Huy Nguyen <huyn@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mohamad Haj Yahia authored
Add more cache command size sets and more entries for each set based on the current commands set different sizes and commands frequency. Fixes: e126ba97 ('mlx5: Add driver for Mellanox Connect-IB adapters') Signed-off-by: Mohamad Haj Yahia <mohamad@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Edward Cree says: ==================== sfc: Firmware-Assisted TSO version 2 The firmware on 8000 series SFC NICs supports a new TSO API ("FATSOv2"), and 7000 series NICs will also support this in an imminent release. This series adds driver support for this TSO implementation. The series also removes SWTSO, as it's now equivalent to GSO. This does not actually remove very much code, because SWTSO was grotesquely intertwingled with FATSOv1, which will also be removed once 7000 series supports FATSOv2. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Edward Cree authored
It gives no advantage over GSO now that xmit_more exists. If we find ourselves unable to handle a TSO skb (because our TXQ doesn't have a TSOv2 context and the NIC doesn't support TSOv1), hand it back to GSO. Also do that if the TSO handler fails with EINVAL for any other reason. As Falcon-architecture NICs don't support any firmware-assisted TSO, they no longer advertise TSO feature flags at all. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Edward Cree authored
If we fail to init the TXQ because of insufficient TSOv2 contexts, try again with TSOv2 disabled. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Bert Kenward authored
Add support for FATSOv2 to the driver. FATSOv2 offloads far more of the task of TCP segmentation to the firmware, such that we now just pass a single super-packet to the NIC. This means TSO has a great deal in common with a normal DMA transmit, apart from adding a couple of option descriptors. NIC-specific checks have been moved off the fast path and in to initialisation where possible. This also moves FATSOv1/SWTSO to a new file (tx_tso.c). The end of transmit and some error handling is now outside TSO, since it is common with other code. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Edward Cree authored
Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Edward Cree authored
Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Alexey Dobriyan authored
Make struct pernet_operations::id unsigned. There are 2 reasons to do so: 1) This field is really an index into an zero based array and thus is unsigned entity. Using negative value is out-of-bound access by definition. 2) On x86_64 unsigned 32-bit data which are mixed with pointers via array indexing or offsets added or subtracted to pointers are preffered to signed 32-bit data. "int" being used as an array index needs to be sign-extended to 64-bit before being used. void f(long *p, int i) { g(p[i]); } roughly translates to movsx rsi, esi mov rdi, [rsi+...] call g MOVSX is 3 byte instruction which isn't necessary if the variable is unsigned because x86_64 is zero extending by default. Now, there is net_generic() function which, you guessed it right, uses "int" as an array index: static inline void *net_generic(const struct net *net, int id) { ... ptr = ng->ptr[id - 1]; ... } And this function is used a lot, so those sign extensions add up. Patch snipes ~1730 bytes on allyesconfig kernel (without all junk messing with code generation): add/remove: 0/0 grow/shrink: 70/598 up/down: 396/-2126 (-1730) Unfortunately some functions actually grow bigger. This is a semmingly random artefact of code generation with register allocator being used differently. gcc decides that some variable needs to live in new r8+ registers and every access now requires REX prefix. Or it is shifted into r12, so [r12+0] addressing mode has to be used which is longer than [r8] However, overall balance is in negative direction: add/remove: 0/0 grow/shrink: 70/598 up/down: 396/-2126 (-1730) function old new delta nfsd4_lock 3886 3959 +73 tipc_link_build_proto_msg 1096 1140 +44 mac80211_hwsim_new_radio 2776 2808 +32 tipc_mon_rcv 1032 1058 +26 svcauth_gss_legacy_init 1413 1429 +16 tipc_bcbase_select_primary 379 392 +13 nfsd4_exchange_id 1247 1260 +13 nfsd4_setclientid_confirm 782 793 +11 ... put_client_renew_locked 494 480 -14 ip_set_sockfn_get 730 716 -14 geneve_sock_add 829 813 -16 nfsd4_sequence_done 721 703 -18 nlmclnt_lookup_host 708 686 -22 nfsd4_lockt 1085 1063 -22 nfs_get_client 1077 1050 -27 tcf_bpf_init 1106 1076 -30 nfsd4_encode_fattr 5997 5930 -67 Total: Before=154856051, After=154854321, chg -0.00% Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
UDP busy polling is restricted to connected UDP sockets. This is because sk_busy_loop() only takes care of one NAPI context. There are cases where it could be extended. 1) Some hosts receive traffic on a single NIC, with one RX queue. 2) Some applications use SO_REUSEPORT and associated BPF filter to split the incoming traffic on one UDP socket per RX queue/thread/cpu 3) Some UDP sockets are used to send/receive traffic for one flow, but they do not bother with connect() This patch records the napi_id of first received skb, giving more reach to busy polling. Tested: lpaa23:~# echo 70 >/proc/sys/net/core/busy_read lpaa24:~# echo 70 >/proc/sys/net/core/busy_read lpaa23:~# for f in `seq 1 10`; do ./super_netperf 1 -H lpaa24 -t UDP_RR -l 5; done Before patch : 27867 28870 37324 41060 41215 36764 36838 44455 41282 43843 After patch : 73920 73213 70147 74845 71697 68315 68028 75219 70082 73707 Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 17 Nov, 2016 5 commits
-
-
David S. Miller authored
Sowmini Varadhan says: ==================== RDS: TCP: HA/Failover fixes This series contains a set of fixes for bugs exposed when we ran the following in a loop between a test machine pair: while (1); do # modprobe rds-tcp on test nodes # run rds-stress in bi-dir mode between test machine pair # modprobe -r rds-tcp on test nodes done rds-stress in bi-dir mode will cause both nodes to initiate RDS-TCP connections at almost the same instant, exposing the bugs fixed in this series. Without the fixes, rds-stress reports sporadic packet drops, and packets arriving out of sequence. After the fixes,we have been able to run the test overnight, without any issues. Each patch has a detailed description of the root-cause fixed by the patch. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sowmini Varadhan authored
When 2 RDS peers initiate an RDS-TCP connection simultaneously, there is a potential for "duelling syns" on either/both sides. See commit 241b2719 ("RDS-TCP: Reset tcp callbacks if re-using an outgoing socket in rds_tcp_accept_one()") for a description of this condition, and the arbitration logic which ensures that the numerically large IP address in the TCP connection is bound to the RDS_TCP_PORT ("canonical ordering"). The rds_connection should not be marked as RDS_CONN_UP until the arbitration logic has converged for the following reason. The sender may start transmitting RDS datagrams as soon as RDS_CONN_UP is set, and since the sender removes all datagrams from the rds_connection's cp_retrans queue based on TCP acks. If the TCP ack was sent from a tcp socket that got reset as part of duel aribitration (but before data was delivered to the receivers RDS socket layer), the sender may end up prematurely freeing the datagram, and the datagram is no longer reliably deliverable. This patch remedies that condition by making sure that, upon receipt of 3WH completion state change notification of TCP_ESTABLISHED in rds_tcp_state_change, we mark the rds_connection as RDS_CONN_UP if, and only if, the IP addresses and ports for the connection are canonically ordered. In all other cases, rds_tcp_state_change will force an rds_conn_path_drop(), and rds_queue_reconnect() on both peers will restart the connection to ensure canonical ordering. A side-effect of enforcing this condition in rds_tcp_state_change() is that rds_tcp_accept_one_path() can now be refactored for simplicity. It is also no longer possible to encounter an RDS_CONN_UP connection in the arbitration logic in rds_tcp_accept_one(). Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sowmini Varadhan authored
The RDS transport has to be able to distinguish between two types of failure events: (a) when the transport fails (e.g., TCP connection reset) but the RDS socket/connection layer on both sides stays the same (b) when the peer's RDS layer itself resets (e.g., due to module reload or machine reboot at the peer) In case (a) both sides must reconnect and continue the RDS messaging without any message loss or disruption to the message sequence numbers, and this is achieved by rds_send_path_reset(). In case (b) we should reset all rds_connection state to the new incarnation of the peer. Examples of state that needs to be reset are next expected rx sequence number from, or messages to be retransmitted to, the new incarnation of the peer. To achieve this, the RDS handshake probe added as part of commit 5916e2c1 ("RDS: TCP: Enable multipath RDS for TCP") is enhanced so that sender and receiver of the RDS ping-probe will add a generation number as part of the RDS_EXTHDR_GEN_NUM extension header. Each peer stores local and remote generation numbers as part of each rds_connection. Changes in generation number will be detected via incoming handshake probe ping request or response and will allow the receiver to reset rds_connection state. Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sowmini Varadhan authored
As noted in rds_recv_incoming() sequence numbers on data packets can decreas for the failover case, and the Rx path is equipped to recover from this, if the RDS_FLAG_RETRANSMITTED is set on the rds header of an incoming message with a suspect sequence number. The RDS_FLAG_RETRANSMITTED is predicated on the RDS_FLAG_RETRANSMITTED flag in the rds_message, so make sure the flag is set on messages queued for retransmission. Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
LABBE Corentin authored
As sugested by Joe Perches, we could replace all if (netif_msg_type(priv)) dev_xxx(priv->devices, ...) by the simpler macro netif_xxx(priv, hw, priv->dev, ...) Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-