The HDLCD engine needs an active plane while the CRTC is active, as
it will start scanning out data from HDLCD_REG_FB_BASE once it gets
enabled. Make sure that the only available plane doesn't get disabled
while the CRTC remains active, as this will scanout invalid data.
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>

The plane cleanup handler currently calls drm_plane_helper_disable(),
which is a legacy helper function. Replace it with a call to
drm_atomic_helper_shutdown() at removal time. The plane .destroy()
handler now consisting only of a call to drm_plane_cleanup(), replace it
with direct calls to that function.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>

The top-level error handler calls drm_mode_config_cleanup() which will
destroy all planes. There's no need to destroy them manually in lower
error handlers.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>

Use drm_fb_cma_fbdev_init() and drm_fb_cma_fbdev_fini() which relies on
the fact that drm_device holds a pointer to the drm_fb_helper structure.
This means that the driver doesn't have to keep track of that.
Also use the drm_fb_helper functions directly.

Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Brian Starkey <brian.starkey@arm.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>

Replace driver's code with the generic helpers that do the same thing
including the NULL check.

Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Brian Starkey <brian.starkey@arm.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>

rmk requested this for armada and I think we've had a few
conflicts build up.
Signed-off-by: Dave Airlie <airlied@redhat.com>

This is amdkfd pull for 4.19. The major changes are:

- Add Raven support. Raven refers to Ryzen APUs with integrated GFXv9 GPU.
- Integrate GPU reset support

In addition, there are a couple of small fixes and improvements, such as:

- Better handling and reporting to user of VM faults
- Fix race upon context restore
- Allow the user to use specific Compute Units
- Basic power management
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180728122306.GA5235@ogabbay-vm

Pull ext4 fixes from Ted Ts'o:
 "Some miscellaneous ext4 fixes for 4.18; one fix is for a regression
  introduced in 4.18-rc4.

  Sorry for the late-breaking pull. I was originally going to wait for
  the next merge window, but Eric Whitney found a regression introduced
  in 4.18-rc4, so I decided to push out the regression plus the other
  fixes now. (The other commits have been baking in linux-next since
  early July)"

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: fix check to prevent initializing reserved inodes
  ext4: check for allocation block validity with block group locked
  ext4: fix inline data updates with checksums enabled
  ext4: clear mmp sequence number when remounting read-only
  ext4: fix false negatives *and* false positives in ext4_check_descriptors()

Anatoly Trosinenko reports that a corrupted squashfs image can cause a
kernel oops.  It turns out that squashfs can end up being confused about
negative fragment lengths.

The regular squashfs_read_data() does check for negative lengths, but
squashfs_read_metadata() did not, and the fragment size code just
blindly trusted the on-disk value.  Fix both the fragment parsing and
the metadata reading code.
Reported-by: Anatoly Trosinenko <anatoly.trosinenko@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Phillip Lougher <phillip@squashfs.org.uk>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 8844618d: "ext4: only look at the bg_flags field if it is
valid" will complain if block group zero does not have the
EXT4_BG_INODE_ZEROED flag set.  Unfortunately, this is not correct,
since a freshly created file system has this flag cleared.  It gets
almost immediately after the file system is mounted read-write --- but
the following somewhat unlikely sequence will end up triggering a
false positive report of a corrupted file system:

   mkfs.ext4 /dev/vdc
   mount -o ro /dev/vdc /vdc
   mount -o remount,rw /dev/vdc

Instead, when initializing the inode table for block group zero, test
to make sure that itable_unused count is not too large, since that is
the case that will result in some or all of the reserved inodes
getting cleared.

This fixes the failures reported by Eric Whiteney when running
generic/230 and generic/231 in the the nojournal test case.

Fixes: 8844618d ("ext4: only look at the bg_flags field if it is valid")
Reported-by: Eric Whitney <enwlinux@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

Pull random fixes from Ted Ts'o:
 "In reaction to the fixes to address CVE-2018-1108, some Linux
  distributions that have certain systemd versions in some cases
  combined with patches to libcrypt for FIPS/FEDRAMP compliance, have
  led to boot-time stalls for some hardware.

  The reaction by some distros and Linux sysadmins has been to install
  packages that try to do complicated things with the CPU and hope that
  leads to randomness.

  To mitigate this, if RDRAND is available, mix it into entropy provided
  by userspace. It won't hurt, and it will probably help"

* tag 'random_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random:
  random: mix rdrand with entropy sent in from userspace

Pull GPIO fixes from Linus Walleij:
 "Just a smallish OF fix and a driver fix:

   - OF flag fix for special regulator flags

   - fix up the Uniphier IRQ callback"

* tag 'gpio-v4.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpio: uniphier: set legitimate irq trigger type in .to_irq hook
  gpio: of: Handle fixed regulator flags properly

Pull MIPS fix from Paul Burton:
 "Here's one more MIPS fix, reverting an errata workaround that was
  merged for v4.18-rc2 but has since been found to cause system hangs on
  some BCM4718A1-based systems by the OpenWRT project"

* tag 'mips_fixes_4.18_5' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  Revert "MIPS: BCM47XX: Enable 74K Core ExternalSync for PCIe erratum"

Pull i2c fixes from Wolfram Sang:
 "Some driver bugfixes"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: imx: use open drain for recovery GPIO
  i2c: rcar: handle RXDMA HW behaviour on Gen3
  i2c: imx: Fix reinit_completion() use
  i2c: davinci: Avoid zero value of CLKH

Pull block fixes from Jens Axboe:
 "Bigger than usual at this time, mostly due to the O_DIRECT corruption
  issue and the fact that I was on vacation last week. This contains:

   - NVMe pull request with two fixes for the FC code, and two target
     fixes (Christoph)

   - a DIF bio reset iteration fix (Greg Edwards)

   - two nbd reply and requeue fixes (Josef)

   - SCSI timeout fixup (Keith)

   - a small series that fixes an issue with bio_iov_iter_get_pages(),
     which ended up causing corruption for larger sized O_DIRECT writes
     that ended up racing with buffered writes (Martin Wilck)"

* tag 'for-linus-20180727' of git://git.kernel.dk/linux-block:
  block: reset bi_iter.bi_done after splitting bio
  block: bio_iov_iter_get_pages: pin more pages for multi-segment IOs
  blkdev: __blkdev_direct_IO_simple: fix leak in error case
  block: bio_iov_iter_get_pages: fix size of last iovec
  nvmet: only check for filebacking on -ENOTBLK
  nvmet: fixup crash on NULL device path
  scsi: set timed out out mq requests to complete
  blk-mq: export setting request completion state
  nvme: if_ready checks to fail io to deleting controller
  nvmet-fc: fix target sgl list on large transfers
  nbd: handle unexpected replies better
  nbd: don't requeue the same request twice.

Merge misc fixes from Andrew Morton:
 "11 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  kvm, mm: account shadow page tables to kmemcg
  zswap: re-check zswap_is_full() after do zswap_shrink()
  include/linux/eventfd.h: include linux/errno.h
  mm: fix vma_is_anonymous() false-positives
  mm: use vma_init() to initialize VMAs on stack and data segments
  mm: introduce vma_init()
  mm: fix exports that inadvertently make put_page() EXPORT_SYMBOL_GPL
  ipc/sem.c: prevent queue.status tearing in semop
  mm: disallow mappings that conflict for devm_memremap_pages()
  kasan: only select SLUB_DEBUG with SYSFS=y
  delayacct: fix crash in delayacct_blkio_end() after delayacct init failure

Pull PCI fix from Bjorn Helgaas:
 "Fix a use-after-free error in fatal error recovery (Thomas Tai)"

* tag 'pci-v4.18-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI/AER: Work around use-after-free in pcie_do_fatal_recovery()

Pull arm64 fixes from Will Deacon:
 "Inevitably, after saying that I hoped we would be done on the fixes
  front, a couple of issues have cropped up over the last week. Next
  time I'll stay schtum.

  We've fixed an over-eager BUILD_BUG_ON() which Arnd ran into with
  arndconfig, as well as ensuring that KPTI really is disabled on
  Thunder-X1, where the cure is worse than the disease (this regressed
  when we reworked the heterogeneous CPU feature checking).

  Summary:

   - Fix disabling of kpti on Thunder-X machines

   - Fix premature BUILD_BUG_ON() found with randconfig"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: fix vmemmap BUILD_BUG_ON() triggering on !vmemmap setups
  arm64: Check for errata before evaluating cpu features

This reverts commit 2a027b47 ("MIPS: BCM47XX: Enable 74K Core
ExternalSync for PCIe erratum").

Enabling ExternalSync caused a regression for BCM4718A1 (used e.g. in
Netgear E3000 and ASUS RT-N16): it simply hangs during PCIe
initialization. It's likely that BCM4717A1 is also affected.

I didn't notice that earlier as the only BCM47XX devices with PCIe I
own are:
1) BCM4706 with 2 x 14e4:4331
2) BCM4706 with 14e4:4360 and 14e4:4331
it appears that BCM4706 is unaffected.

While BCM5300X-ES300-RDS.pdf seems to document that erratum and its
workarounds (according to quotes provided by Tokunori) it seems not even
Broadcom follows them.

According to the provided info Broadcom should define CONF7_ES in their
SDK's mipsinc.h and implement workaround in the si_mips_init(). Checking
both didn't reveal such code. It *could* mean Broadcom also had some
problems with the given workaround.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Reported-by: Michael Marley <michael@michaelmarley.com>
Patchwork: https://patchwork.linux-mips.org/patch/20032/
URL: https://bugs.openwrt.org/index.php?do=details&task_id=1688
Cc: Tokunori Ikegami <ikegami@allied-telesis.co.jp>
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Cc: Chris Packham <chris.packham@alliedtelesis.co.nz>
Cc: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org

Pull drm fixes from Dave Airlie:
 "Not much happening this week which is good: two imx display fixes and
  one i915 quirk addition"

* tag 'drm-fixes-2018-07-27' of git://anongit.freedesktop.org/drm/drm:
  drm/i915/glk: Add Quirk for GLK NUC HDMI port issues.
  gpu: ipu-csi: Check for field type alternate
  drm/imx: imx-ldb: check if channel is enabled before printing warning
  drm/imx: imx-ldb: disable LDB on driver bind

Pull input fixes from Dmitry Torokhov:

 - a couple of new device IDs added to Elan i2c touchpad controller
   driver

 - another entry in i8042 reset quirk list

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: i8042 - add Lenovo LaVie Z to the i8042 reset list
  Input: elan_i2c - add another ACPI ID for Lenovo Ideapad 330-15AST
  MAINTAINERS: Add file patterns for serio device tree bindings
  Input: elan_i2c - add ACPI ID for lenovo ideapad 330

Pull tracing fixes from Steven Rostedt:
 "Various fixes to the tracing infrastructure:

   - Fix double free when the reg() call fails in
     event_trigger_callback()

   - Fix anomoly of snapshot causing tracing_on flag to change

   - Add selftest to test snapshot and tracing_on affecting each other

   - Fix setting of tracepoint flag on error that prevents probes from
     being deleted.

   - Fix another possible double free that is similar to
     event_trigger_callback()

   - Quiet a gcc warning of a false positive unused variable

   - Fix crash of partial exposed task->comm to trace events"

* tag 'trace-v4.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  kthread, tracing: Don't expose half-written comm when creating kthreads
  tracing: Quiet gcc warning about maybe unused link variable
  tracing: Fix possible double free in event_enable_trigger_func()
  tracing/kprobes: Fix trace_probe flags on enable_trace_kprobe() failure
  selftests/ftrace: Add snapshot and tracing_on test case
  ring_buffer: tracing: Inherit the tracing setting to next ring buffer
  tracing: Fix double free of event_trigger_data

Pull xfs fixes from Darrick Wong:

 - Fix some uninitialized variable errors

 - Fix an incorrect check in metadata verifiers

* tag 'xfs-4.18-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: properly handle free inodes in extent hint validators
  xfs: Initialize variables in xfs_alloc_get_rec before using them

After the bio has been updated to represent the remaining sectors, reset
bi_done so bio_rewind_iter() does not rewind further than it should.

This resolves a bio_integrity_process() failure on reads where the
original request was split.

Fixes: 63573e35 ("bio-integrity: Restore original iterator on verify stage")
Signed-off-by: Greg Edwards <gedwards@ddn.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

The size of kvm's shadow page tables corresponds to the size of the
guest virtual machines on the system.  Large VMs can spend a significant
amount of memory as shadow page tables which can not be left as system
memory overhead.  So, account shadow page tables to the kmemcg.

[shakeelb@google.com: replace (GFP_KERNEL|__GFP_ACCOUNT) with GFP_KERNEL_ACCOUNT]
  Link: http://lkml.kernel.org/r/20180629140224.205849-1-shakeelb@google.com
Link: http://lkml.kernel.org/r/20180627181349.149778-1-shakeelb@google.comSigned-off-by: Shakeel Butt <shakeelb@google.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Peter Feiner <pfeiner@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

/sys/../zswap/stored_pages keeps rising in a zswap test with
"zswap.max_pool_percent=0" parameter.  But it should not compress or
store pages any more since there is no space in the compressed pool.

Reproduce steps:
  1. Boot kernel with "zswap.enabled=1"
  2. Set the max_pool_percent to 0
      # echo 0 > /sys/module/zswap/parameters/max_pool_percent
  3. Do memory stress test to see if some pages have been compressed
      # stress --vm 1 --vm-bytes $mem_available"M" --timeout 60s
  4. Watching the 'stored_pages' number increasing or not

The root cause is:

  When zswap_max_pool_percent is set to 0 via kernel parameter,
  zswap_is_full() will always return true due to zswap_shrink().  But if
  the shinking is able to reclain a page successfully the code then
  proceeds to compressing/storing another page, so the value of
  stored_pages will keep changing.

To solve the issue, this patch adds a zswap_is_full() check again after
  zswap_shrink() to make sure it's now under the max_pool_percent, and to
  not compress/store if we reached the limit.

Link: http://lkml.kernel.org/r/20180530103936.17812-1-liwang@redhat.comSigned-off-by: Li Wang <liwang@redhat.com>
Acked-by: Dan Streetman <ddstreet@ieee.org>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Huang Ying <huang.ying.caritas@gmail.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The new gasket staging driver ran into a randconfig build failure when
CONFIG_EVENTFD is disabled:

  In file included from drivers/staging/gasket/gasket_interrupt.h:11,
                   from drivers/staging/gasket/gasket_interrupt.c:4:
  include/linux/eventfd.h: In function 'eventfd_ctx_fdget':
  include/linux/eventfd.h:51:9: error: implicit declaration of function 'ERR_PTR' [-Werror=implicit-function-declaration]

I can't see anything wrong with including eventfd.h before err.h, so the
easiest fix is to make it possible to do this by including the file
where it is needed.

Link: http://lkml.kernel.org/r/20180724110737.3985088-1-arnd@arndb.de
Fixes: 9a69f508 ("drivers/staging: Gasket driver framework + Apex driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

vma_is_anonymous() relies on ->vm_ops being NULL to detect anonymous
VMA.  This is unreliable as ->mmap may not set ->vm_ops.

False-positive vma_is_anonymous() may lead to crashes:

	next ffff8801ce5e7040 prev ffff8801d20eca50 mm ffff88019c1e13c0
	prot 27 anon_vma ffff88019680cdd8 vm_ops 0000000000000000
	pgoff 0 file ffff8801b2ec2d00 private_data 0000000000000000
	flags: 0xff(read|write|exec|shared|mayread|maywrite|mayexec|mayshare)
	------------[ cut here ]------------
	kernel BUG at mm/memory.c:1422!
	invalid opcode: 0000 [#1] SMP KASAN
	CPU: 0 PID: 18486 Comm: syz-executor3 Not tainted 4.18.0-rc3+ #136
	Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google
	01/01/2011
	RIP: 0010:zap_pmd_range mm/memory.c:1421 [inline]
	RIP: 0010:zap_pud_range mm/memory.c:1466 [inline]
	RIP: 0010:zap_p4d_range mm/memory.c:1487 [inline]
	RIP: 0010:unmap_page_range+0x1c18/0x2220 mm/memory.c:1508
	Call Trace:
	 unmap_single_vma+0x1a0/0x310 mm/memory.c:1553
	 zap_page_range_single+0x3cc/0x580 mm/memory.c:1644
	 unmap_mapping_range_vma mm/memory.c:2792 [inline]
	 unmap_mapping_range_tree mm/memory.c:2813 [inline]
	 unmap_mapping_pages+0x3a7/0x5b0 mm/memory.c:2845
	 unmap_mapping_range+0x48/0x60 mm/memory.c:2880
	 truncate_pagecache+0x54/0x90 mm/truncate.c:800
	 truncate_setsize+0x70/0xb0 mm/truncate.c:826
	 simple_setattr+0xe9/0x110 fs/libfs.c:409
	 notify_change+0xf13/0x10f0 fs/attr.c:335
	 do_truncate+0x1ac/0x2b0 fs/open.c:63
	 do_sys_ftruncate+0x492/0x560 fs/open.c:205
	 __do_sys_ftruncate fs/open.c:215 [inline]
	 __se_sys_ftruncate fs/open.c:213 [inline]
	 __x64_sys_ftruncate+0x59/0x80 fs/open.c:213
	 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290
	 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Reproducer:

	#include <stdio.h>
	#include <stddef.h>
	#include <stdint.h>
	#include <stdlib.h>
	#include <string.h>
	#include <sys/types.h>
	#include <sys/stat.h>
	#include <sys/ioctl.h>
	#include <sys/mman.h>
	#include <unistd.h>
	#include <fcntl.h>

	#define KCOV_INIT_TRACE			_IOR('c', 1, unsigned long)
	#define KCOV_ENABLE			_IO('c', 100)
	#define KCOV_DISABLE			_IO('c', 101)
	#define COVER_SIZE			(1024<<10)

	#define KCOV_TRACE_PC  0
	#define KCOV_TRACE_CMP 1

	int main(int argc, char **argv)
	{
		int fd;
		unsigned long *cover;

		system("mount -t debugfs none /sys/kernel/debug");
		fd = open("/sys/kernel/debug/kcov", O_RDWR);
		ioctl(fd, KCOV_INIT_TRACE, COVER_SIZE);
		cover = mmap(NULL, COVER_SIZE * sizeof(unsigned long),
				PROT_READ | PROT_WRITE, MAP_SHARED, fd, 0);
		munmap(cover, COVER_SIZE * sizeof(unsigned long));
		cover = mmap(NULL, COVER_SIZE * sizeof(unsigned long),
				PROT_READ | PROT_WRITE, MAP_PRIVATE, fd, 0);
		memset(cover, 0, COVER_SIZE * sizeof(unsigned long));
		ftruncate(fd, 3UL << 20);
		return 0;
	}

This can be fixed by assigning anonymous VMAs own vm_ops and not relying
on it being NULL.

If ->mmap() failed to set ->vm_ops, mmap_region() will set it to
dummy_vm_ops.  This way we will have non-NULL ->vm_ops for all VMAs.

Link: http://lkml.kernel.org/r/20180724121139.62570-4-kirill.shutemov@linux.intel.comSigned-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: syzbot+3f84280d52be9b7083cc@syzkaller.appspotmail.com
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Make sure to initialize all VMAs properly, not only those which come
from vm_area_cachep.

Link: http://lkml.kernel.org/r/20180724121139.62570-3-kirill.shutemov@linux.intel.comSigned-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Not all VMAs allocated with vm_area_alloc().  Some of them allocated on
stack or in data segment.

The new helper can be use to initialize VMA properly regardless where it
was allocated.

Link: http://lkml.kernel.org/r/20180724121139.62570-2-kirill.shutemov@linux.intel.comSigned-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit e7638488 ("mm: introduce MEMORY_DEVICE_FS_DAX and
CONFIG_DEV_PAGEMAP_OPS") added two EXPORT_SYMBOL_GPL() symbols, but
these symbols are required by the inlined put_page(), thus accidentally
making put_page() a GPL export only.  This breaks OpenAFS (at least).

Mark them EXPORT_SYMBOL() instead.

Link: http://lkml.kernel.org/r/153128611970.2928.11310692420711601254.stgit@dwillia2-desk3.amr.corp.intel.com
Fixes: e7638488 ("mm: introduce MEMORY_DEVICE_FS_DAX and CONFIG_DEV_PAGEMAP_OPS")
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reported-by: Joe Gorse <jhgorse@gmail.com>
Reported-by: John Hubbard <jhubbard@nvidia.com>
Tested-by: Joe Gorse <jhgorse@gmail.com>
Tested-by: John Hubbard <jhubbard@nvidia.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Mark Vitale <mvitale@sinenomine.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

In order for load/store tearing prevention to work, _all_ accesses to
the variable in question need to be done around READ and WRITE_ONCE()
macros.  Ensure everyone does so for q->status variable for
semtimedop().

Link: http://lkml.kernel.org/r/20180717052654.676-1-dave@stgolabs.netSigned-off-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When pmem namespaces created are smaller than section size, this can
cause an issue during removal and gpf was observed:

  general protection fault: 0000 1 SMP PTI
  CPU: 36 PID: 3941 Comm: ndctl Tainted: G W 4.14.28-1.el7uek.x86_64 #2
  task: ffff88acda150000 task.stack: ffffc900233a4000
  RIP: 0010:__put_page+0x56/0x79
  Call Trace:
    devm_memremap_pages_release+0x155/0x23a
    release_nodes+0x21e/0x260
    devres_release_all+0x3c/0x48
    device_release_driver_internal+0x15c/0x207
    device_release_driver+0x12/0x14
    unbind_store+0xba/0xd8
    drv_attr_store+0x27/0x31
    sysfs_kf_write+0x3f/0x46
    kernfs_fop_write+0x10f/0x18b
    __vfs_write+0x3a/0x16d
    vfs_write+0xb2/0x1a1
    SyS_write+0x55/0xb9
    do_syscall_64+0x79/0x1ae
    entry_SYSCALL_64_after_hwframe+0x3d/0x0

Add code to check whether we have a mapping already in the same section
and prevent additional mappings from being created if that is the case.

Link: http://lkml.kernel.org/r/152909478401.50143.312364396244072931.stgit@djiang5-desk3.ch.intel.comSigned-off-by: Dave Jiang <dave.jiang@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Robert Elliott <elliott@hpe.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Building with KASAN and SLUB but without sysfs now results in a
build-time error:

  WARNING: unmet direct dependencies detected for SLUB_DEBUG
    Depends on [n]: SLUB [=y] && SYSFS [=n]
    Selected by [y]:
    - KASAN [=y] && HAVE_ARCH_KASAN [=y] && (SLUB [=y] || SLAB [=n] && !DEBUG_SLAB [=n]) && SLUB [=y]
  mm/slub.c:4565:12: error: 'list_locations' defined but not used [-Werror=unused-function]
   static int list_locations(struct kmem_cache *s, char *buf,
              ^~~~~~~~~~~~~~
  mm/slub.c:4406:13: error: 'validate_slab_cache' defined but not used [-Werror=unused-function]
   static long validate_slab_cache(struct kmem_cache *s)

This disallows that broken configuration in Kconfig.

Link: http://lkml.kernel.org/r/20180709154019.1693026-1-arnd@arndb.de
Fixes: dd275caf ("kasan: depend on CONFIG_SLUB_DEBUG")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: "Jason A. Donenfeld" <Jason@zx2c4.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Christoph Lameter <cl@linux.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

While forking, if delayacct init fails due to memory shortage, it
continues expecting all delayacct users to check task->delays pointer
against NULL before dereferencing it, which all of them used to do.

Commit c96f5471 ("delayacct: Account blkio completion on the correct
task"), while updating delayacct_blkio_end() to take the target task
instead of always using %current, made the function test NULL on
%current->delays and then continue to operated on @p->delays.  If
%current succeeded init while @p didn't, it leads to the following
crash.

 BUG: unable to handle kernel NULL pointer dereference at 0000000000000004
 IP: __delayacct_blkio_end+0xc/0x40
 PGD 8000001fd07e1067 P4D 8000001fd07e1067 PUD 1fcffbb067 PMD 0
 Oops: 0000 [#1] SMP PTI
 CPU: 4 PID: 25774 Comm: QIOThread0 Not tainted 4.16.0-9_fbk1_rc2_1180_g6b593215b4d7 #9
 RIP: 0010:__delayacct_blkio_end+0xc/0x40
 Call Trace:
  try_to_wake_up+0x2c0/0x600
  autoremove_wake_function+0xe/0x30
  __wake_up_common+0x74/0x120
  wake_up_page_bit+0x9c/0xe0
  mpage_end_io+0x27/0x70
  blk_update_request+0x78/0x2c0
  scsi_end_request+0x2c/0x1e0
  scsi_io_completion+0x20b/0x5f0
  blk_mq_complete_request+0xa2/0x100
  ata_scsi_qc_complete+0x79/0x400
  ata_qc_complete_multiple+0x86/0xd0
  ahci_handle_port_interrupt+0xc9/0x5c0
  ahci_handle_port_intr+0x54/0xb0
  ahci_single_level_irq_intr+0x3b/0x60
  __handle_irq_event_percpu+0x43/0x190
  handle_irq_event_percpu+0x20/0x50
  handle_irq_event+0x2a/0x50
  handle_edge_irq+0x80/0x1c0
  handle_irq+0xaf/0x120
  do_IRQ+0x41/0xc0
  common_interrupt+0xf/0xf

Fix it by updating delayacct_blkio_end() check @p->delays instead.

Link: http://lkml.kernel.org/r/20180724175542.GP1934745@devbig577.frc2.facebook.com
Fixes: c96f5471 ("delayacct: Account blkio completion on the correct task")
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Dave Jones <dsj@fb.com>
Debugged-by: Dave Jones <dsj@fb.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Josh Snyder <joshs@netflix.com>
Cc: <stable@vger.kernel.org>	[4.15+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Updates for 4.19.  Mostly bug fixes and cleanups.  Highlights:
- Internal API cleanup in GPU scheduler
- Decouple i2c and aux abstractions in DC
- Update maintainers
- Misc cleanups
- Misc bug fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180725215326.2709-1-alexander.deucher@amd.com

Merge tag 'exynos-drm-next-for-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next

Cleanups
- Change g2d driver to component based driver
  . g2d driver was last customed sub driver so this patch series
    changes it to component based driver, which also makes gem handling
    to be more simplify.
- Cleanup of Exynos DRM suspend/resume
  . Register exynos drm core suspend/resume functions
    to prepare/complete callbacks of dev_pm_ops instead of suspend/resume
    callbacks to ensure exynos_drm_suspend() is called before any suspend
    callback from the real devices to avoid some issues on boards with
    complex pipelines.
  . Also Add pm_runtime_furce_suspend/resume as SYSTEM_SLEEP_PM_OPS
    to ensure that resources of each devices will be released
    for the system PM suspend/resume cycle.
- Remove local value not used.
Signed-off-by: Dave Airlie <airlied@redhat.com>

Link: https://patchwork.freedesktop.org/patch/msgid/1532505748-10025-1-git-send-email-inki.dae@samsung.com

I have a couple of small patches for malidp to be applied in drm-next.
They have arisen from the decision to switch the writeback connectors to
always connected.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180723145302.GA28052@e110455-lin.cambridge.arm.com

drm/imx: cleanup and csi improvements

- Remove the unused struct imx_drm_crtc and the unused pipes field
  from imx_drm_device and replace drm_dev_unref with drm_dev_put.
- Extend CSI configuration to support RGB888 and BGR888 capture,
  as well as 16-bit RGB565 capture via a parallel bus.
- Add CPMEM support for negative interlace offsets, which is
  necessary to support writing captured bottom-top interlaced
  fields to memory with interleaved lines.
Signed-off-by: Dave Airlie <airlied@redhat.com>

Link: https://patchwork.freedesktop.org/patch/msgid/1532100583.3438.9.camel@pengutronix.de