- 18 Dec, 2013 27 commits
-
-
Ben Widawsky authored
Rearrange the initialization code to try to special case the aliasing PPGTT less, and provide usable interfaces for the general case later. Signed-off-by:
Ben Widawsky <ben@bwidawsk.net> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
Ben Widawsky authored
I've found this by accident. The docs don't really come out and say you need to do this. What the docs do tell you is you need to flush the TLBs before you set the PP_DIR_BASE, and that the RCS will invalidate its TLBs upon setting the new PP_DIR_BASE. It makes no such comment about any of the other rings. Empirically, this indeed fixes a really obvious bug whereby the batches being sent to the blitter were not executing (we were executing the HSWP somehow instead). NOTE: This should make no difference with the current code. It only applies when we start using multiple VMs. NOTE2: HSW appears to be immune to this. Signed-off-by:
-
Ben Widawsky authored
The docs seem to suggest this is the appropriate method (though it doesn't say so outright). In other words, we probably should have done this before. We certainly must do this for switching VMs on the fly, since synchronizing the rings to MMIO updates isn't acceptable. v2: Make the reset code actually work for all rings. Note that this was fixed in subsequent commits, but was indeed broken for this commit. Add a posting read to the reset case. It probably should have existed before hand, but since we have no failures; there is no reason to make it a separate commit. Make IS_GEN6 not use the ring because I am seeing crashes when using it. It is a bit of a hack in this patch, it will get fixed up in a couple of patches. Signed-off-by:
-
Ben Widawsky authored
In order to do the full context switch with address space, it's convenient to have a way to switch the address space. We already have this in our code - just pull it out to be called by the context switch code later. v2: Rebased on BDW support. Required adding BDW. Signed-off-by:
-
Ben Widawsky authored
Signed-off-by:
-
Ben Widawsky authored
The patch before this changed the way in which we allocate space for the PPGTT PDEs. It began carving out the PPGTT PDEs (which live in the Global GTT) from the GGTT's drm_mm. Prior to that patch, the PDEs were hidden from the drm_mm, and therefore could never fail to be allocated. In unfortunate cases, the drm_mm may be full when we want to allocate the space. This can technically occur whenever we try to allocate, which happens in two places currently. Practically, it can only really ever happen at GPU reset. Later, when we allocate more PDEs for multiple PPGTTs this will potentially even more useful. Signed-off-by:
-
Ben Widawsky authored
When PPGTT support was originally enabled, it was only designed to support 1 PPGTT. It therefore made sense to simply hide the GGTT space required to enable this from the drm_mm allocator. Since we intend to support full PPGTT, which means more than 1, and they can be created and destroyed ad hoc it will be required to use the proper allocation techniques we already have. The first step here is to make the existing single PPGTT use the allocator. The astute observer will notice that we are reserving space in the GGTT for the PDEs for the lifetime of the address space, and would be right to question whether or not this is a good idea. It does not make a difference with this current patch only the aliasing PPGTT (indeed the PDEs should still be hidden from the shrinker). For the future, we are allocating from top to bottom to avoid using the precious "gtt space" The GGTT space at that point should only be used for scanout, HW contexts, ringbuffers, HWSP, PDEs, and a couple of other small buffers (potentially) used by the kernel. Everything else should be mapped into a PPGTT. To put the consumption in more tangible terms, it takes approximately 4 sets of PDEs to equal one 19x10 framebuffer (with no fancy stride or alignment constraints). 3/4 of the total [average] GGTT can be used for PDEs, and hopefully never touch the 1/4 that the framebuffer needs. The astute, and persistent observer might ask about the page tables which are also pinned for the address space. This waste is unfortunate. We use 2MB of memory per address space. We leave wrapping the PDEs as a real GEM object as a TODO. v2: Align PDEs to 64b in GTT Allocate the node dynamically so we can use drm_mm_put_block Now tested on IGT Allocate node at the top to avoid fragmentation (Chris) v3: Use Chris' top down allocator v4: Embed drm_mm_node into ppgtt struct (Jesse) Remove hunks which didn't belong (Jesse) v5: Don't subtract guard page since we now killed the guard page prior to this patch. (Ben) v6: Rebased and removed guard page stuff. Added a chunk to the commit message Allow adding a context to mappable region v7: Undo v3, so we can make the drm patch last in the series Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> (v4) Signed-off-by:
-
Ben Widawsky authored
Signed-off-by:
-
Ben Widawsky authored
The plan to to make every file descriptor have a default context. To accommodate this, generalize out default context setup function so it can be used at file open time. Signed-off-by:
-
Ben Widawsky authored
We **need** to do this for exactly 1 reason, because we want to embed a PPGTT into the context, but we don't want to special case the default context. To achieve that, we must be able to initialize contexts after the GTT is setup (so we can allocate and pin the default context's BO), but before the PPGTT and rings are initialized. This is because, currently, context initialization requires ring usage. We don't have rings until after the GTT is setup. If we split the enabling part of context initialization, the part requiring the ringbuffer, we can untangle this, and then later embed the PPGTT Incidentally this allows us to also adhere to the original design of context init/fini in future patches: they were only ever meant to be called at driver load and unload. v2: Move hw_contexts_disabled test in i915_gem_context_enable() (Chris) v3: BUG_ON after checking for disabled contexts. Or else it blows up pre gen6 (Ben) v4: Forward port Modified enable for each ring, since that patch is earlier in the series Dropped ring arg from create_default_context so it can be used by others Signed-off-by:
-
Ben Widawsky authored
This patch adds to changes for contexts on reset: Sets last context to default - this will prevent the context switch happening after a reset. That switch is not possible because the rings are hung during reset and context switch requires reset. This behavior will need to be reworked in the future, but this is what we want for now. In the future, we'll also want to reset the guilty context to uninitialized. We should wait for ARB_Robustness related code to land for that. This is somewhat for paranoia. Because we really don't know what the GPU was doing when it hung, or the state it was in (mid context write, for example), later restoring the context is a bad idea. By setting the flag to not initialized, the next load of that context will not restore the state, and thus on the subsequent switch away from the context will overwrite the old data. NOTE: This code needs a fixup when we actually have multiple VMs. The issue that can occur is inactive objects in a VM will need to be destroyed before the last context unref. This can now happen via the fake switch introduced in this patch (and it other ways in the future) Signed-off-by:
-
Ben Widawsky authored
Previously we dropped the association of a context to a ring. It is however very important to know which ring a context ran on (we could have reused the other member, but I was nitpicky). This is very important when we switch address spaces, which unlike context objects, do change per ring. As an example, if we have: RCS BCS ctx A ctx A ctx B ctx B Without tracking the last ring B ran on, we wouldn't know to switch the address space on BCS in the last row. As a result, we no longer need to track which ring a context "belongs" to, as it never really made much sense anyway. Signed-off-by: -
Ben Widawsky authored
If we want to use contexts in more abstract terms (specifically with PPGTT in mind), we need to allow them to be specified for any ring. Since the upcoming patches will bring about the use of multiple address spaces, and each ring needs to have an address space programmed (which we intend to do at context switch time), we can no longer only use RCS. With multiple rings having a last context, we must now unreference these contexts. NOTE: This commit requires an update to intel-gpu-tools to make it not fail. v2: Rebased with some logical conflicts. Squashed in the context fini refcount patch Signed-off-by:
-
Ben Widawsky authored
Signed-off-by:
-
Ben Widawsky authored
With the introduction of contexts per fd in the future, one can easily envision more contexts being used. We do not have an easy remedy to reduce the space requirements of the contexts, we can make things slightly better by using less stringent alignments on later hardware. Ville: Since I can almost predict you'll point this out. I can no longer find the docs which specify the 64k requirement on certain gen6 SKUs. If you'd like to change that too, be my guest. CC: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Ben Widawsky authored
We'll be doing a bit more stuff with each file, so having our own open function should make things clean. This also allows us to easily add conditionals for stuff we don't want to do when we don't have HW contexts. Signed-off-by:
-
Ben Widawsky authored
The only place we were using it was for GEN6, which won't have PPGTT support anyway (ie. the VM is always the same). To clear things up, (it only added confusion for me since it doesn't allow us to assert vma->vm is what we always want, when just looking at the code). Signed-off-by:
-
Ben Widawsky authored
To sum up what goes on here, we abstract the vma binding, similarly to the previous object binding. This helps for distinguishing legacy binding, versus modern binding. To keep the code churn as minimal as possible, I am leaving in insert_entries(). It serves as the per platform pte writing basically. bind_vma and insert_entries do share a lot of similarities, and I did have designs to combine the two, but as mentioned already... too much churn in an already massive patchset. What follows are the 3 commits which existed discretely in the original submissions. Upon rebasing on Broadwell support, it became clear that separation was not good, and only made for more error prone code. Below are the 3 commit messages with all their history. drm/i915: Add bind/unbind object functions to VMA drm/i915: Use the new vm [un]bind functions drm/i915: reduce vm->insert_entries() usage drm/i915: Add bind/unbind object functions to VMA As we plumb the code with more VM information, it has become more obvious that the easiest way to deal with bind and unbind is to simply put the function pointers in the vm, and let those choose the correct way to handle the page table updates. This change allows many places in the code to simply be vm->bind, and not have to worry about distinguishing PPGTT vs GGTT. Notice that this patch has no impact on functionality. I've decided to save the actual change until the next patch because I think it's easier to review that way. I'm happy to squash the two, or let Daniel do it on merge. v2: Make ggtt handle the quirky aliasing ppgtt Add flags to bind object to support above Don't ever call bind/unbind directly for PPGTT until we have real, full PPGTT (use NULLs to assert this) Make sure we rebind the ggtt if there already is a ggtt binding. This happens on set cache levels. Use VMA for bind/unbind (Daniel, Ben) v3: Reorganize ggtt_vma_bind to be more concise and easier to read (Ville). Change logic in unbind to only unbind ggtt when there is a global mapping, and to remove a redundant check if the aliasing ppgtt exists. v4: Make the bind function a bit smarter about the cache levels to avoid unnecessary multiple remaps. "I accept it is a wart, I think unifying the pin_vma / bind_vma could be unified later" (Chris) Removed the git notes, and put version info here. (Daniel) v5: Update the comment to not suck (Chris) v6: Move bind/unbind to the VMA. It makes more sense in the VMA structure (always has, but I was previously lazy). With this change, it will allow us to keep a distinct insert_entries. Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
Ben Widawsky authored
Signed-off-by:
-
Ben Widawsky authored
Using the current state of the page directory registers, we can determine which of our address spaces was active when the hang occurred. This allows us to scan through all the address spaces to identify the "active" one during error capture. v2: Rebased for BDW error detection. BDW error detection is similar except instead of PP_DIR_BASE, we can use the PDP registers. Signed-off-by:
-
Ben Widawsky authored
The existing check was insufficient to determine whether we can use the GTT mapping to read out the object during error capture. The previous condition was, if the object has a GGTT mapping, and the reloc is in the GTT range... the can happen with opjects mapped into multiple vms (one of which being the GTT). There are two solutions to this problem: 1. This patch, which avoid reading the io mapping 2. Use the GGTT offset with the io mapping. Since error capture is about recording the most accurate possible error state, and the error was caused by the object not in the GGTT - I opted for the former. Signed-off-by:
-
Ben Widawsky authored
formerly: drm/i915: Create VMAs (part 6) - finish error plumbing Signed-off-by:
-
Ben Widawsky authored
This came from a patch called, "drm/i915: Move active to vma" When moving an object to the inactive list, we do it for all VMs for which the object is bound. The primary difference from that patch is this time around we don't not track 'active' per vma, but rather by object. Therefore, we only need one unref. Signed-off-by:
-
Ben Widawsky authored
This was found by code inspection. If the GTT setup fails then we are left without properly tearing down the drm_mm. Hopefully this never happens. Signed-off-by:
-
Ben Widawsky authored
To be able to effectively use the GGTT object lookup function, we don't want to warn when there is no GGTT mapping. Let the caller deal with it instead. Originally, I had intended to have this behavior, and has not introduced the WARN. It was introduced during review with the addition of the follow commit commit 5c2abbea Author: Ben Widawsky <benjamin.widawsky@intel.com> Date: Tue Sep 24 09:57:57 2013 -0700 drm/i915: Provide a cheap ggtt vma lookup Signed-off-by:
-
Ben Widawsky authored
Since the beginning, the functions which try to properly reference the aliasing PPGTT have deferences a potentially null aliasing_ppgtt member. Since the accessors are meant to be global, this will not do. Introduced originally in: commit a70a3148 Author: Ben Widawsky <ben@bwidawsk.net> Date: Wed Jul 31 16:59:56 2013 -0700 drm/i915: Make proper functions for VMs Signed-off-by:
-
Ben Widawsky authored
The initial implementation of this function used MMIO to write the PDPs. Upon review it was determined (correctly) that the docs say to use LRI. The issue is there are times where we want to do a synchronous write (GPU reset). I've tested this, and it works. I've verified with as many people as possible that it should work. This should fix the failing reset problems. Signed-off-by:
-
- 09 Dec, 2013 1 commit
-
-
Daniel Vetter authored
Linux 3.13-rc3 I need a backmerge for two reasons: - For merging the ppgtt patches from Ben I need to pull in the bdw support. - We now have duplicated calls to intel_uncore_forcewake_reset in the setup code to due 2 different patches merged into -next and 3.13. The conflict is silen so I need the merge to be able to apply Deepak's fixup patch. Conflicts: drivers/gpu/drm/i915/intel_display.c Trivial conflict, it doesn't even show up in the merge diff. Signed-off-by:
-
- 06 Dec, 2013 12 commits
-
-
Paulo Zanoni authored
Currently, PC8 is enabled at modeset_global_resources, which is called after intel_modeset_update_state. Due to this, there's a small race condition on the case where we start enabling PC8, then do a modeset while PC8 is still being enabled. The racing condition triggers a WARN because intel_modeset_update_state will mark the CRTC as enabled, then the thread that's still enabling PC8 might look at the data structure and think that PC8 is being enabled while a pipe is enabled. Despite the WARN, this is not really a bug since we'll wait for the PC8-enabling thread to finish when we call modeset_global_resources. The spec says the CRTC cannot be enabled when we disable LCPLL, so we had a check for crtc->base.enabled. If we change to crtc->active we will still prevent disabling LCPLL while the CRTC is enabled, and we will also prevent the WARN above. This is a replacement for the previous patch named "drm/i915: get/put PC8 when we get/put a CRTC" Testcase: igt/pm_pc8/modeset-lpsp-stress-no-wait Signed-off-by:Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by:
-
Linus Torvalds authored
-
Linus Torvalds authored
Merge tag 'trace-fixes-3.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fix from Steven Rostedt: "A regression showed up that there's a large delay when enabling all events. This was prevalent when FTRACE_SELFTEST was enabled which enables all events several times, and caused the system bootup to pause for over a minute. This was tracked down to an addition of a synchronize_sched() performed when system call tracepoints are unregistered. The synchronize_sched() is needed between the unregistering of the system call tracepoint and a deletion of a tracing instance buffer. But placing the synchronize_sched() in the unreg of *every* system call tracepoint is a bit overboard. A single synchronize_sched() before the deletion of the instance is sufficient" * tag 'trace-fixes-3.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Only run synchronize_sched() at instance deletion time
-
git://git.kvack.org/~bcrl/aio-nextLinus Torvalds authored
Pull aio fix from Benjamin LaHaise: "AIO fix from Gu Zheng that fixes a GPF that Dave Jones uncovered with trinity" * git://git.kvack.org/~bcrl/aio-next: aio: clean up aio ring in the fail path
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "This is a set of nine fixes (and one author update). The libsas one should fix discovery in eSATA devices, the WRITE_SAME one is the largest, but it should fix a lot of problems we've been getting with the emulated RAID devices (they've been effectively lying about support and then firmware has been choking on the commands). The rest are various crash, hang or warn driver fixes" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: [SCSI] bfa: Fix crash when symb name set for offline vport [SCSI] enclosure: fix WARN_ON in dual path device removing [SCSI] pm80xx: Tasklets synchronization fix. [SCSI] pm80xx: Resetting the phy state. [SCSI] pm80xx: Fix for direct attached device. [SCSI] pm80xx: Module author addition [SCSI] hpsa: return 0 from driver probe function on success, not 1 [SCSI] hpsa: do not discard scsi status on aborted commands [SCSI] Disable WRITE SAME for RAID and virtual host adapter drivers [SCSI] libsas: fix usage of ata_tf_to_fis
-
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-securityLinus Torvalds authored
Pull IMA fixes from James Morris: "Here are two more fixes for IMA" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: ima: properly free ima_template_entry structures ima: Do not free 'entry' before it is initialized
-
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linuxLinus Torvalds authored
Pull devicetree fixes from Rob Herring: - Various DT binding documentation updates - Add Kumar Gala and remove Stephen Warren as DT binding maintainers * tag 'dt-fixes-for-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt: binding: reword PowerPC 8xxx GPIO documentation ARM: tegra: delete nvidia,tegra20-spi.txt binding hwmon: ntc_thermistor: Fix typo (pullup-uV -> pullup-uv) of: add vendor prefix for GMT clk: exynos: Fix typos in DT bindings documentation of: Add vendor prefix for LG Corporation Documentation: net: fsl-fec.txt: Add phy-supply entry ARM: dts: doc: Document missing binding for omap5-mpu dt-bindings: add ARMv8 PMU binding MAINTAINERS: remove swarren from DT bindings MAINTAINERS: Add Kumar to Device Tree Binding maintainers group
-
Gu Zheng authored
Clean up the aio ring file in the fail path of aio_setup_ring and ioctx_alloc. And maybe it can fix the GPF issue reported by Dave Jones: https://lkml.org/lkml/2013/11/25/898Signed-off-by:
Gu Zheng <guz.fnst@cn.fujitsu.com> Signed-off-by:
Benjamin LaHaise <bcrl@kvack.org>
-
James Morris authored
Merge branch 'free-memory' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity into for-linus
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull power management fixes from Rafael Wysocki: - cpufreq regression fix from Bjørn Mork restoring the pre-3.12 behavior of the framework during system suspend/hibernation to avoid garbage sysfs files from being left behind in case of a suspend error - PNP regression fix to restore the correct states of devices after resume from hibernation broken in 3.12. From Dmitry Torokhov. - cpuidle fix to prevent cpuidle device unregistration from crashing due to a NULL pointer dereference if cpuidle has been disabled from the kernel command line. From Konrad Rzeszutek Wilk. - intel_idle fix for the C6 state definition on Intel Avoton/Rangeley processors from Arne Bockholdt. - Power capping framework fix to make the energy_uj sysfs attribute work in accordance with the documentation. From Srinivas Pandruvada. - epoll fix to make it ignore the EPOLLWAKEUP flag if the kernel has been compiled with CONFIG_PM_SLEEP unset (in which case that flag should not have any effect). From Amit Pundir. - cpufreq fix to prevent governor sysfs files from being lost over system suspend/resume in some (arguably unusual) situations. From Viresh Kumar. * tag 'pm-3.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PowerCap: Fix mode for energy counter PNP: fix restoring devices after hibernation cpuidle: Check for dev before deregistering it. epoll: drop EPOLLWAKEUP if PM_SLEEP is disabled cpufreq: fix garbage kobjects on errors during suspend/resume cpufreq: suspend governors on system suspend/hibernate intel_idle: Fixed C6 state on Avoton/Rangeley processors
-
Rafael J. Wysocki authored
* pm-epoll: epoll: drop EPOLLWAKEUP if PM_SLEEP is disabled * pnp: PNP: fix restoring devices after hibernation * powercap: PowerCap: Fix mode for energy counter
-
Rafael J. Wysocki authored
* pm-cpuidle: cpuidle: Check for dev before deregistering it. intel_idle: Fixed C6 state on Avoton/Rangeley processors * pm-cpufreq: cpufreq: fix garbage kobjects on errors during suspend/resume cpufreq: suspend governors on system suspend/hibernate
-
