- 22 Mar, 2011 40 commits
-
-
Hans Verkuil authored
drivers/media/video/cx88/cx88-alsa.c: In function 'cx88_audio_initdev': drivers/media/video/cx88/cx88-alsa.c:881:20: warning: 'core' may be used uninitialized in this function The compiler doesn't understand that snd_cx88_create fills in the core pointer. So just initialize it to NULL. Signed-off-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans Verkuil authored
drivers/media/radio/wl128x/fmdrv_common.c: In function 'recv_tasklet': drivers/media/radio/wl128x/fmdrv_common.c:274:4: warning: format '%d' expects type 'int', but argument 4 has type 'long unsigned int' The result of sizeof() should be printed with %zu. Signed-off-by:
-
Hans Verkuil authored
drivers/media/video/cx23885/altera-ci.c: In function 'altera_hw_filt_init': drivers/media/video/cx23885/altera-ci.c:671:2: warning: cast from pointer to integer of different size drivers/media/video/cx23885/altera-ci.c: In function 'altera_ci_init': drivers/media/video/cx23885/altera-ci.c:739:2: warning: cast from pointer to integer of different size Use %p instead of 0x%x to print addresses. Signed-off-by:
-
Hans Verkuil authored
drivers/media/dvb/frontends/stv0367.c: In function 'stv0367ter_lock_algo': drivers/media/dvb/frontends/stv0367.c:1315:2: warning: cast from pointer to integer of different size Use %p to print addresses instead of 0x%x. Signed-off-by:
-
Hans Verkuil authored
drivers/media/common/tuners/tuner-xc2028.c: In function 'generic_set_freq': drivers/media/common/tuners/tuner-xc2028.c:936:15: warning: comparison between 'enum tuner_mode' and 'enum v4l2_tuner_type' Argument type was enum tuner_mode, but should have been enum v4l2_tuner_type. Signed-off-by:
-
Sakari Ailus authored
Add documentation on the OMAP 3 ISP driver. Document the subdevs, V4L2 events and private IOCTLs the driver implements Signed-off-by:
Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by:
David Cohen <dacohen@gmail.com> Signed-off-by:
-
Laurent Pinchart authored
Pick an unused range of ioctls in Documentation/ioctl/ioctl-number.txt and use it for the MEDIA_IOC_* ioctls. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Laurent Pinchart authored
Replace the omap_pm_set_min_bus_tput() with a callback to board code. This makes the omap3isp driver compilable as a module, and lets board code manage OMAP PM details depending on board requirements. Signed-off-by:
Stanimir Varbanov <svarbanov@mm-sol.com> Signed-off-by:
-
Laurent Pinchart authored
Add the OMAP3 ISP driver to the kernel build system. Signed-off-by:
-
David Cohen authored
The OMAP3 ISP statistics entities compute histogram and H3A statistics information from capture images. Signed-off-by:
Vimarsh Zutshi <vimarsh.zutshi@gmail.com> Signed-off-by:
Tuukka Toivonen <tuukkat76@gmail.com> Signed-off-by:
Sergio Aguirre <saaguirre@ti.com> Signed-off-by:
Antti Koskipaa <akoskipa@gmail.com> Signed-off-by:
Ivan T. Ivanov <iivanov@mm-sol.com> Signed-off-by:
RaniSuneela <r-m@ti.com> Signed-off-by:
Atanas Filipov <afilipov@mm-sol.com> Signed-off-by:
Gjorgji Rosikopulos <grosikopulos@mm-sol.com> Signed-off-by:
Hiroshi DOYU <Hiroshi.DOYU@nokia.com> Signed-off-by:
Nayden Kanchev <nkanchev@mm-sol.com> Signed-off-by:
Phil Carmody <ext-phil.2.carmody@nokia.com> Signed-off-by:
Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by:
Dominic Curran <dcurran@ti.com> Signed-off-by:
Ilkka Myllyperkio <ilkka.myllyperkio@sofica.fi> Signed-off-by:
Pallavi Kulkarni <p-kulkarni@ti.com> Signed-off-by:
Vaibhav Hiremath <hvaibhav@ti.com> Acked-by:
-
Laurent Pinchart authored
The OMAP3 ISP CCDC, preview engine and resizer entities perform image processing and scaling. Signed-off-by:
-
Laurent Pinchart authored
The OMAP3 ISP CCP2 and CSI2 receivers provide an interface to connect serial MIPI sensors to the device. Signed-off-by:
-
Laurent Pinchart authored
The OMAP3 ISP video devices and buffers queue modules implement the V4L2 API on all the ISP video nodes. Signed-off-by:
-
Sakari Ailus authored
The Image Signal Processor provides the system interface and the processing capability to connect RAW or YUV image-sensor modules to the OMAP3. Signed-off-by:
-
Laurent Pinchart authored
Instead of returning an error when receiving an ioctl call with an unsupported command, forward the call to the subdev core::ioctl handler. Signed-off-by:
-
Sergio Aguirre authored
Make sure the kernel can be compiled with both OMAP2 and OMAP3 camera support linked in, and give public symbols proper omap2/omap3 prefixes. Signed-off-by:
Tony Lindgren <tony@atomide.com> Acked-by:
-
Laurent Pinchart authored
The omap3isp platform device requires platform data. Instead of registering the device in omap2_init_devices(), export an omap3_init_camera() function to fill the device structure with the platform data pointer and register the device. Signed-off-by:
-
Sergio Aguirre authored
The ISP CBUFF module isn't use, its resource isn't needed. Signed-off-by:
-
Tuukka Toivonen authored
Add new/changed base address definitions and resources for OMAP3630 ISP. The OMAP3430 CSI2PHY block is same as the OMAP3630 CSIPHY2 block. But the later name is chosen as it gives more symmetry to the names. Signed-off-by:
-
Laurent Pinchart authored
Add FCCs for the following pixel formats: - V4L2_PIX_FMT_SBGGR12 - V4L2_PIX_FMT_SGBRG12 - V4L2_PIX_FMT_SGRBG12 - V4L2_PIX_FMT_SRGGB12 Signed-off-by:
-
Laurent Pinchart authored
Add codes and documentation for the following media bus formats: - V4L2_MBUS_FMT_SGBRG12_1X12 - V4L2_MBUS_FMT_SGRBG12_1X12 - V4L2_MBUS_FMT_SRGGB12_1X12 Signed-off-by:
-
Laurent Pinchart authored
This adds following formats: - V4L2_MBUS_FMT_SRGGB10_1X10 - V4L2_MBUS_FMT_SGBRG10_1X10 - V4L2_MBUS_FMT_SRGGB10_DPCM8_1X8 - V4L2_MBUS_FMT_SGBRG10_DPCM8_1X8 - V4L2_MBUS_FMT_SBGGR10_DPCM8_1X8 Signed-off-by:
-
Laurent Pinchart authored
Add the following media bus format code definitions: - V4L2_MBUS_FMT_SGRBG10_1X10 for 10-bit GRBG Bayer - V4L2_MBUS_FMT_SGRBG10_DPCM8_1X8 for 10-bit DPCM compressed GRBG Bayer - V4L2_MBUS_FMT_YUYV16_1X16 for 8-bit YUYV on 16-bit bus - V4L2_MBUS_FMT_UYVY16_1X16 for 8-bit UYVY on 16-bit bus - V4L2_MBUS_FMT_YVYU16_1X16 for 8-bit YVYU on 16-bit bus - V4L2_MBUS_FMT_VYUY16_1X16 for 8-bit VYUY on 16-bit bus Signed-off-by:
-
Laurent Pinchart authored
Some buggy sensors generate corrupt frames when the stream is started. This new operation return the number of corrupt frames to skip when starting the stream. Signed-off-by:
-
Antti Koskipaa authored
This patch adds the VIDIOC_SUBDEV_S_CROP and G_CROP ioctls to the userland API. CROPCAP is not implemented because it's redundant. Signed-off-by:
-
Laurent Pinchart authored
The three new ioctl VIDIOC_SUBDEV_ENUM_FRAME_INTERVAL, VIDIOC_SUBDEV_G_FRAME_INTERVAL and VIDIOC_SUBDEV_S_FRAME_INTERVAL can be used to enumerate and configure a subdev's frame rate from userspace. Two new video::g/s_frame_interval subdev operations are introduced to support those ioctls. The existing video::g/s_parm operations are deprecated and shouldn't be used anymore. Signed-off-by:
-
Laurent Pinchart authored
Add a userspace API to get, set and enumerate the media format on a subdev pad. The format at the output of a subdev usually depends on the format at its input(s). The try format operation is thus not suitable for probing format at individual pads, as it can't modify the device state and thus can't remember the format tried at the input to compute the output format. To fix the problem, pass an extra argument to the get/set format operations to select the 'try' or 'active' format. The try format is used when probing the subdev. Setting the try format must not change the device configuration but can store data for later reuse. Data storage is provided at the file-handle level so applications probing the subdev concurently won't interfere with each other. The active format is used when configuring the subdev. It's identical to the format handled by the usual get/set operations. Signed-off-by:
-
Laurent Pinchart authored
Add images used by the V4L2 subdev userspace format API documentation. Signed-off-by:
-
Laurent Pinchart authored
Add a v4l2_subdev_pad_ops structure for the operations that need to be performed at the pad level such as format-related operations. Pad format-related operations use v4l2_mbus_framefmt instead of v4l2_format. Signed-off-by:
-
Laurent Pinchart authored
V4L2 sub-devices store pad formats and crop settings in the file handle. To let drivers initialize those settings properly, add an open operation that is called when the subdev is opened as well as a corresponding close operation. Signed-off-by:
-
Stanimir Varbanov authored
Used for storing subdev information per file handle and hold V4L2 file handle. Signed-off-by:
-
Laurent Pinchart authored
Adding new pixel codes at the end of the enumeration will soon create a mess, so group the pixel codes by type and sort them by bus_width, bits per component, samples per pixel and order of subsamples. As the codes are part of the kernel ABI their value can't change when a new code is inserted in the enumeration, so they are given an explicit numerical value. When inserting a new pixel code developers must use and update the next free value. Signed-off-by:
-
Laurent Pinchart authored
For consistency with the V4L2_MBUS_FMT_Y10_1X10 format. Signed-off-by:
-
Laurent Pinchart authored
The v4l2_mbus_framefmt structure will be part of the public userspace API and used (albeit indirectly) as an ioctl argument. As such, its size must be fixed across userspace ABIs. Replace the v4l2_field and v4l2_colorspace enums by __u32 fields and add padding for future enhancements. Signed-off-by:
-
Laurent Pinchart authored
The header defines the v4l2_mbus_framefmt structure which will be used by the V4L2 subdevs userspace API. Change the type of the v4l2_mbus_framefmt::code field to __u32, as enum sizes can differ between different ABIs on the same architectures. Signed-off-by:
-
Laurent Pinchart authored
V4L2 subdevices are media entities. As such they need to inherit from (include) the media_entity structure. When registering/unregistering the subdevice, the media entity is automatically registered/unregistered. The entity is acquired on device open and released on device close. Signed-off-by:
-
Laurent Pinchart authored
V4L2 devices are media entities. As such they need to inherit from (include) the media_entity structure. When registering/unregistering the device, the media entity is automatically registered/unregistered. The entity is acquired on device open and released on device close. Signed-off-by:
-
Laurent Pinchart authored
The pointer will later be used to register/unregister media entities when registering/unregistering a v4l2_subdev or a video_device. With the introduction of media devices, device drivers need to store a pointer to a driver-specific structure in the device's drvdata. v4l2_device can't claim ownership of the drvdata anymore. To maintain compatibility with drivers that rely on v4l2_device storing a pointer to itself in the device's drvdata, v4l2_device_register() will keep doing so if the drvdata is NULL. Signed-off-by:
-
Laurent Pinchart authored
Drivers often need to associate pipeline objects to entities, and to take stream state into account when configuring entities and links. The pipeline API helps drivers manage that information. When starting streaming, drivers call media_entity_pipeline_start(). The function marks all entities connected to the given entity through enabled links, either directly or indirectly, as streaming. Similarly, when stopping the stream, drivers call media_entity_pipeline_stop(). The media_entity_pipeline_start() function takes a pointer to a media pipeline and stores it in every entity in the graph. Drivers should embed the media_pipeline structure in higher-level pipeline structures and can then access the pipeline through the media_entity structure. Link configuration will fail with -EBUSY by default if either end of the link is a streaming entity, unless the link is marked with the MEDIA_LNK_FL_DYNAMIC flag. Signed-off-by:
-
Laurent Pinchart authored
Create the following ioctl and implement it at the media device level to setup links. - MEDIA_IOC_SETUP_LINK: Modify the properties of a given link The only property that can currently be modified is the ENABLED link flag to enable/disable a link. Links marked with the IMMUTABLE link flag can not be enabled or disabled. Enabling or disabling a link has effects on entities' use count. Those changes are automatically propagated through the graph. Signed-off-by:
-
