- 18 Mar, 2014 14 commits
-
-
Or Gerlitz authored
The networking core does it for the driver during registration time. Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric W Biederman authored
When compiling the i40e and the i40evf driver into the same kernel I get: LD drivers/net/ethernet/intel/built-in.o drivers/net/ethernet/intel/i40evf/built-in.o:(.data+0x300): multiple definition of `i40e_ptype_lookup' drivers/net/ethernet/intel/i40e/built-in.o:(.data+0x780): first defined here make[3]: *** [drivers/net/ethernet/intel/built-in.o] Error 1 make[2]: *** [drivers/net/ethernet/intel] Error 2 make[1]: *** [drivers/net/ethernet/] Error 2 make: *** [sub-make] Error 2 Fix this by renaming the i40evf version of this structure from i40e_ptype_lookup to i40evf_ptype_lookup. This build failure was introduced in: commit 206812b5 Author: Jesse Brandeburg <jesse.brandeburg@intel.com> i40e/i40evf: i40e implementation for skb_set_hash Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Cc: Catherine Sullivan <catherine.sullivan@intel.com> Signed-off-by:
Eric W Biederman <ebiederm@xmission.com> Tested-by:
Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Kevin Hao authored
The commit 28002099 (e1000e: Refactor PM flows) changed the SET_SYSTEM_SLEEP_PM_OPS to open-coded assignment, but forgot to protect them with CONFIG_PM_SLEEP. Then cause the following build error when PM is disabled: drivers/net/ethernet/intel/e1000e/netdev.c:7079:13: error: 'e1000e_pm_suspend' undeclared here (not in a function) .suspend = e1000e_pm_suspend, ^ drivers/net/ethernet/intel/e1000e/netdev.c:7080:13: error: 'e1000e_pm_resume' undeclared here (not in a function) .resume = e1000e_pm_resume, ^ drivers/net/ethernet/intel/e1000e/netdev.c:7082:11: error: 'e1000e_pm_thaw' undeclared here (not in a function) .thaw = e1000e_pm_thaw, ^ Signed-off-by:
Kevin Hao <haokexin@gmail.com> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
-
Fernando Luis Vazquez Cao authored
Command line parameters QueuePairs, Node, EEE, DMAC and InterruptThrottleRate do not exist these days. Remove all references to them in the Documentation folder and update code comments. Signed-off-by:
Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp> Tested-by:
-
David S. Miller authored
Vince Bridgers says: ==================== Altera Triple Speed Ethernet (TSE) Driver This is the version 6 submission for the Altera Triple Speed Ethernet (TSE) driver. All comments received during the version 2, 3, 4, and 5 submissions have been accepted. Please find the change log and a description of the submission below. If you find the submission acceptable, please consider this patch set for inclusion into the Linux kernel. V6: Address comments from V5 review - add call to skb_tx_timestamp in the drivers transmit path - correct use of unsigned int where it was cast to pointer. Use types appropriate for intended and correct use to let the compiler warn us when type usage is incorrect. - use correct semantics for pointer arithmetic in same code path V5: Address comments from V4 review - Add descriptions of statistics to driver documentation. The statstics supported by the driver/controller map to IEEE and RFC statistics, and the names and mappings are described in the user documentation. - Change "unsigned int" to u32 in device structure definitions - Change used of netdev_warn to netif_warn in altera_sgdma.c - Change stat name rx_fifo_drops to ether_drops to match the event actually counted by the hardware. V4: Address comments from V3 review - Change statistics names in ethtool module to follow common use in other ethernet drivers. - remove an unnecessary case in ethtool module - change logging to use netdev_* where possible instead of dev_* - remove logging for OOM errors since those are already logged V3: Address comments from V2 review - Reorder patch submission so that net/ethernet Makefile and Kconfig are committed last, thus not breaking bisect - Use of_get_mac_address instead of of_get_property - Change supplemental and hash configuration bindings to boolean/empty, and more meaningful names - Add check for failure from calls to of_phy_connect and connect_local_phy - Correct code to find mdio child node - Update bindings document - Remove cast to u64 when not necessary - add use of const for statistics strings V2: Address comments from initial RFC review. - The driver files were broken up by major sections of functionality. These include MSGDMA, SGDMA, Misc, and Main. - Add patch for MAINTAINERS file, add the maintainer for this submission - Use 32-bit lower/upper physical address accessor functions so the driver is 64-bit ready. - Use standard bindings where applicable. Especially phy-addr, and change "altr,rx-fifo-depth" to "rx-fifo-depth" and "altr,tx-fifo-depth" to "tx-fifo-depth". - Add use of max-frame-size property - Update bindings documents accordingly - Correct interrupt handler to use budget parameter in the convential way - Use macros consistently to define bit fields across files - Correct include exclusion macro in altera_msgdmahw.h (typo) - Remove use of barriers, these were not necessary since the DMA APIs ensure memory & buffer consistency - Remove use of netif_carrier_off in driver - move probing of phy from the open function to the probe function - use of_get_phy_mode instead of custom function - Use the .data field in the device structure to obtain a pointer to SGDMA or MSGDMA device specific properties and functions. - remove custom function to access devicetree since Altera specific bindings requiring it's use have been deprecated in favor of standard bindings. The Altera TSE is a 10/100/1000 Mbps Ethernet soft IP component that can be configured and synthesized using Quartus, and programmed into Altera FPGAs. Two types of soft DMA IP components are supported by this driver - the Altera SGDMA and the MSGDMA. The MSGDMA DMA component is preferred over the SGDMA, since the SGDMA will be deprecated in favor of the MSGDMA. Software supporting both is provided for customers still using the SGDMA and to demonstrate how multiple types of DMA engines may be supported by the TSE driver in the event customers wish to develop their own custom soft DMA engine for particular applications. The design has been tested on Altera's Cyclone 4, 5, and Cyclone 5 SOC development kits using an ARM A9 processor and an Altera NIOS2 processor. Differences in CPU/DMA coherency management and address alignment are addressed by proper use of driver APIs and semantics. ==================== Signed-off-by: -
Vince Bridgers authored
This patch changes the Ethernet Makefile and Kconfig files to add the Altera Ethernet driver component. Signed-off-by:
Vince Bridgers <vbridgers2013@gmail.com> Signed-off-by:
-
Vince Bridgers authored
Add a MAINTAINERS entry covering the Altera Triple Speed Ethernet Driver, with support for the MSGDMA and SGDMA soft DMA IP components. Signed-off-by:
-
Vince Bridgers authored
This patch adds the Altera Triple Speed Ethernet Makfile and Kconfig file. Signed-off-by:
-
Vince Bridgers authored
This patch adds the main driver and header file for the Altera Triple Speed Ethernet driver. Signed-off-by:
-
Vince Bridgers authored
This patch adds miscellaneous files for the Altera Ethernet Driver, including ethtool support. Signed-off-by:
-
Vince Bridgers authored
This patch adds the SGDMA soft IP support for the Altera Triple Speed Ethernet driver. Signed-off-by:
-
Vince Bridgers authored
This patch adds the MSGDMA soft IP support for the Altera Triple Speed Ethernet driver. Signed-off-by:
-
Vince Bridgers authored
This patch adds a bindings description for the Altera Triple Speed Ethernet (TSE) driver. The bindings support the legacy SGDMA soft IP as well as the preferred MSGDMA soft IP. The TSE can be configured and synthesized in soft logic using Altera's Quartus toolchain. Please consult the bindings document for supported options. Signed-off-by:
-
Vince Bridgers authored
This patch adds a bindings description for the Altera Triple Speed Ethernet (TSE) driver. The bindings support the legacy SGDMA soft IP as well as the preferred MSGDMA soft IP. The TSE can be configured and synthesized in soft logic using Altera's Quartus toolchain. Please consult the bindings document for supported options. Signed-off-by:
-
- 17 Mar, 2014 26 commits
-
-
Eric Dumazet authored
ARRAY_SIZE(nf_conntrack_locks) is undefined if spinlock_t is an empty structure. Replace it by CONNTRACK_LOCKS Fixes: 93bb0ceb ("netfilter: conntrack: remove central spinlock nf_conntrack_lock") Reported-by:
kbuild test robot <fengguang.wu@intel.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Cc: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
David S. Miller authored
Alexander Aring says: ==================== at86rf230: various fixes and devicetree support this patch series fix some bugs with the at86rf231 chip and cleaup some code. Also add devicetree support for the at86rf230 driver. ==================== Signed-off-by: -
Alexander Aring authored
This patch adds devicetree support for the at86rf230 driver. Possible gpios to configure are "reset-gpio" and "sleep-gpio". Also add support to configure the "irq-type" for the irq polarity register. Signed-off-by:
Alexander Aring <alex.aring@gmail.com> Signed-off-by:
-
Alexander Aring authored
This patch make the reset pin optionally. Some devices like the atben from qi-hardware don't have a reset pin externally. The usually way is to turn power off/on for the atben device to initiate a device reset. Signed-off-by:
-
Alexander Aring authored
While checkpatch another patch I got a: "WARNING: msleep < 20ms can sleep for up to 20ms" The datasheet of at86rf231 and at86rf212 says a minimum delay for reset pulse width and spi access latency after reset is 625 nanoseconds. This patch removes the 1 milliseconds sleep and replace it with a 1 microseconds udelay which should be also okay for the reset pulse width. To change the state from RESET -> TRX_OFF the at86rf230 device needs 120 microseconds, this is a worst case of all at86rf* chips. Signed-off-by:
-
Alexander Aring authored
There is no need to lock the clearing of IRQ_TRX_END in status. Signed-off-by:
-
Alexander Aring authored
This patch fix a unexpected state change for the at86rf231 chip. We can't change into STATE_FORCE_TX_ON while the chip is in one of SLEEP, P_ON, RESET, TRX_OFF, and all *_NOCLK states. In this case we are in the TRX_OFF state. See datasheet [1] page 71 for more information. Without this patch you will get the following message on a at86rf231 device: [ 20.065218] unexpected state change: 8, asked for 4 [ 20.070527] ------------[ cut here ]------------ [ 20.075414] WARNING: CPU: 0 PID: 160 at net/mac802154/ieee802154_dev.c:43 mac802154_slave_open+0x70/0xb8() [ 20.085594] Modules linked in: autofs4 [ 20.089667] CPU: 0 PID: 160 Comm: ifconfig Not tainted 3.14.0-20140108-1-00993-g905c192 #162 [ 20.098612] [<c00127b8>] (unwind_backtrace) from [<c0010b1c>] (show_stack+0x10/0x14) [ 20.106819] [<c0010b1c>] (show_stack) from [<c0033838>] (warn_slowpath_common+0x60/0x80) [ 20.115311] [<c0033838>] (warn_slowpath_common) from [<c00338e8>] (warn_slowpath_null+0x18/0x20) [ 20.124590] [<c00338e8>] (warn_slowpath_null) from [<c057b7e8>] (mac802154_slave_open+0x70/0xb8) [ 20.133880] [<c057b7e8>] (mac802154_slave_open) from [<c0488a58>] (__dev_open+0xa8/0x108) [ 20.142553] [<c0488a58>] (__dev_open) from [<c0488cb0>] (__dev_change_flags+0x8c/0x148) [ 20.151051] [<c0488cb0>] (__dev_change_flags) from [<c0488d84>] (dev_change_flags+0x18/0x48) [ 20.159968] [<c0488d84>] (dev_change_flags) from [<c04e2e9c>] (devinet_ioctl+0x2b0/0x63c) [ 20.168623] [<c04e2e9c>] (devinet_ioctl) from [<c04712e4>] (sock_ioctl+0x23c/0x29c) [ 20.176727] [<c04712e4>] (sock_ioctl) from [<c00e3cb8>] (do_vfs_ioctl+0x4a8/0x578) [ 20.184671] [<c00e3cb8>] (do_vfs_ioctl) from [<c00e3dd4>] (SyS_ioctl+0x4c/0x78) [ 20.192402] [<c00e3dd4>] (SyS_ioctl) from [<c000da00>] (ret_fast_syscall+0x0/0x48) [ 20.200392] ---[ end trace 9a34542f4ea08e47 ]--- This patch was tested on at86rf231 and at86rf212. [1] http://www.atmel.com/images/doc8111.pdfSigned-off-by:
-
David S. Miller authored
Sergei Shtylyov says: ==================== Beautify 'sh_eth' driver's messages This patchset converts te driver to using netdev_*() and netif_*() to print out its messages whenever possible. ==================== Signed-off-by: -
Sergei Shtylyov authored
Now that we call netdev_*() under netif_msg_*() checks, we can fold these into netif_*() macro invocations. Suggested-by:
Joe Perches <joe@perches.com> Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
-
Sergei Shtylyov authored
Convert dev_*(&ndev->dev, ...) to netdev_*(ndev, ...) calls since they are a bit shorter and at the same time give more information on a device. Suggested-by:
-
Sergei Shtylyov authored
Convert pr_*() to netdev_*() calls as the latter provide info on a device. Suggested-by:
-
Sergei Shtylyov authored
Exit the driver's probe() method when the register layout is unknown as the driver would cause kernel oops in this case anyway. While at it, move the corresponding error message printout and convert it from pr_err() to dev_err(). Suggested-by:
-
David S. Miller authored
Eric W. Biederman says: ==================== netpoll: Cleanup received packet processing This is the long-winded, careful, and polite version of removing the netpoll receive packet processing. First I untangle the code in small steps. Then I modify the code to not force reception and dropping of packets when we are transmiting a packet with netpoll. Finally I move all of the packet reception under CONFIG_NETPOLL_TRAP and delete CONFIG_NETPOLL_TRAP. If someone wants to do a stable backport of these patches, it would require backporting the first 18 patches that handle the budget == 0 in the networking drivers, and the first 6 of these patches. If anyone wants to resurrect netpoll packet reception someday it should just be a matter of reverting the last patch. ==================== Signed-off-by: -
Eric W. Biederman authored
The netpoll packet receive code only becomes active if the netpoll rx_skb_hook is implemented, and there is not a single implementation of the netpoll rx_skb_hook in the kernel. All of the out of tree implementations I have found all call netpoll_poll which was removed from the kernel in 2011, so this change should not add any additional breakage. There are problems with the netpoll packet receive code. __netpoll_rx does not call dev_kfree_skb_irq or dev_kfree_skb_any in hard irq context. netpoll_neigh_reply leaks every skb it receives. Reception of packets does not work successfully on stacked devices (aka bonding, team, bridge, and vlans). Given that the netpoll packet receive code is buggy, there are no out of tree users that will be merged soon, and the code has not been used for in tree for a decade let's just remove it. Reverting this commit can server as a starting point for anyone who wants to resurrect netpoll packet reception support. Acked-by:
-
Eric W. Biederman authored
Make rx_skb_hook, and rx in struct netpoll depend on CONFIG_NETPOLL_TRAP Make rx_lock, rx_np, and neigh_tx in struct netpoll_info depend on CONFIG_NETPOLL_TRAP Make the functions netpoll_rx_on, netpoll_rx, and netpoll_receive_skb no-ops when CONFIG_NETPOLL_TRAP is not set. Only build netpoll_neigh_reply, checksum_udp service_neigh_queue, pkt_is_ns, and __netpoll_rx when CONFIG_NETPOLL_TRAP is defined. Add helper functions netpoll_trap_setup, netpoll_trap_setup_info, netpoll_trap_cleanup, and netpoll_trap_cleanup_info that initialize and cleanup the struct netpoll and struct netpoll_info receive specific fields when CONFIG_NETPOLL_TRAP is enabled and do nothing otherwise. Signed-off-by:
-
Eric W. Biederman authored
Move the bond slave device neigh_tx handling into service_neigh_queue. In connection with neigh_tx processing remove unnecessary tests of a NULL netpoll_info. As the netpoll_poll_dev has already used and thus verified the existince of the netpoll_info. Signed-off-by:
-
Eric W. Biederman authored
Now that we no longer need to receive packets to safely drain the network drivers receive queue move netpoll_trap and netpoll_set_trap under CONFIG_NETPOLL_TRAP Making netpoll_trap and netpoll_set_trap noop inline functions when CONFIG_NETPOLL_TRAP is not set. Signed-off-by:
-
Eric W. Biederman authored
Change the strategy of netpoll from dropping all packets received during netpoll_poll_dev to calling napi poll with a budget of 0 (to avoid processing drivers rx queue), and to ignore packets received with netif_rx (those will safely be placed on the backlog queue). All of the netpoll supporting drivers have been reviewed to ensure either thay use netif_rx or that a budget of 0 is supported by their napi poll routine and that a budget of 0 will not process the drivers rx queues. Not dropping packets makes NETPOLL_RX_DROP unnecesary so it is removed. npinfo->rx_flags is removed as rx_flags with just the NETPOLL_RX_ENABLED flag becomes just a redundant mirror of list_empty(&npinfo->rx_np). Signed-off-by:
-
Eric W. Biederman authored
Add a helper netpoll_rx_processing that reports when netpoll has receive side processing to perform. Signed-off-by:
-
Eric W. Biederman authored
There is already a warning for this case in the normal netpoll path, but put a copy here in case how netpoll calls the poll functions causes a differenet result. netpoll will shortly call the napi poll routine with a budget 0 to avoid any rx packets being processed. As nothing does that today we may encounter drivers that have problems so a netpoll specific warning seems desirable. Signed-off-by:
-
Eric W. Biederman authored
In poll_napi loop through all of the napi handlers even when the budget falls to 0 to ensure that we process all of the tx_queues, and so that we continue to call into drivers when our initial budget is 0. Signed-off-by:
-
Eric W. Biederman authored
This moves the control logic to the top level in netpoll_poll_dev instead of having it dispersed throughout netpoll_poll_dev, poll_napi and poll_one_napi. Signed-off-by:
-
Eric W. Biederman authored
Today netpoll depends on setting NETPOLL_RX_DROP before networking drivers receive packets in interrupt context so that the packets can be dropped. Move this setting into netpoll_poll_dev from poll_one_napi so that if ndo_poll_controller happens to receive packets we will drop the packets on the floor instead of letting the packets bounce through the networking stack and potentially cause problems. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter/IPVS updates for net-next The following patchset contains Netfilter/IPVS updates for net-next, most relevantly they are: * cleanup to remove double semicolon from stephen hemminger. * calm down sparse warning in xt_ipcomp, from Fan Du. * nf_ct_labels support for nf_tables, from Florian Westphal. * new macros to simplify rcu dereferences in the scope of nfnetlink and nf_tables, from Patrick McHardy. * Accept queue and drop (including reason for drop) to verdict parsing in nf_tables, also from Patrick. * Remove unused random seed initialization in nfnetlink_log, from Florian Westphal. * Allow to attach user-specific information to nf_tables rules, useful to attach user comments to rule, from me. * Return errors in ipset according to the manpage documentation, from Jozsef Kadlecsik. * Fix coccinelle warnings related to incorrect bool type usage for ipset, from Fengguang Wu. * Add hash:ip,mark set type to ipset, from Vytas Dauksa. * Fix message for each spotted by ipset for each netns that is created, from Ilia Mirkin. * Add forceadd option to ipset, which evicts a random entry from the set if it becomes full, from Josh Hunt. * Minor IPVS cleanups and fixes from Andi Kleen and Tingwei Liu. * Improve conntrack scalability by removing a central spinlock, original work from Eric Dumazet. Jesper Dangaard Brouer took them over to address remaining issues. Several patches to prepare this change come in first place. * Rework nft_hash to resolve bugs (leaking chain, missing rcu synchronization on element removal, etc. from Patrick McHardy. * Restore context in the rule deletion path, as we now release rule objects synchronously, from Patrick McHardy. This gets back event notification for anonymous sets. * Fix NAT family validation in nft_nat, also from Patrick. * Improve scalability of xt_connlimit by using an array of spinlocks and by introducing a rb-tree of hashtables for faster lookup of accounted objects per network. This patch was preceded by several patches and refactorizations to accomodate this change including the use of kmem_cache, from Florian Westphal. ==================== Signed-off-by: -
Florian Westphal authored
With current match design every invocation of the connlimit_match function means we have to perform (number_of_conntracks % 256) lookups in the conntrack table [ to perform GC/delete stale entries ]. This is also the reason why ____nf_conntrack_find() in perf top has > 20% cpu time per core. This patch changes the storage to rbtree which cuts down the number of ct objects that need testing. When looking up a new tuple, we only test the connections of the host objects we visit while searching for the wanted host/network (or the leaf we need to insert at). The slot count is reduced to 32. Increasing slot count doesn't speed up things much because of rbtree nature. before patch (50kpps rx, 10kpps tx): + 20.95% ksoftirqd/0 [nf_conntrack] [k] ____nf_conntrack_find + 20.50% ksoftirqd/1 [nf_conntrack] [k] ____nf_conntrack_find + 20.27% ksoftirqd/2 [nf_conntrack] [k] ____nf_conntrack_find + 5.76% ksoftirqd/1 [nf_conntrack] [k] hash_conntrack_raw + 5.39% ksoftirqd/2 [nf_conntrack] [k] hash_conntrack_raw + 5.35% ksoftirqd/0 [nf_conntrack] [k] hash_conntrack_raw after (90kpps, 51kpps tx): + 17.24% swapper [nf_conntrack] [k] ____nf_conntrack_find + 6.60% ksoftirqd/2 [nf_conntrack] [k] ____nf_conntrack_find + 2.73% swapper [nf_conntrack] [k] hash_conntrack_raw + 2.36% swapper [xt_connlimit] [k] count_tree Obvious disadvantages to previous version are the increase in code complexity and the increased memory cost. Partially based on Eric Dumazets fq scheduler. Reviewed-by:
Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
Florian Westphal authored
currently returns 1 if they're the same. Make it work like mem/strcmp so it can be used as rbtree search function. Reviewed-by:
-
