- 10 Jul, 2009 40 commits
-
-
Jussi Kivilinna authored
Signed-off-by:
Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Zhu Yi authored
The patch cleans up the unused rfkill related structures and flags. It also adds wext and cfg80211 handlers for txpower auto and off so that software rfkill could be issued by user space. Signed-off-by:
Zhu Yi <yi.zhu@intel.com> Signed-off-by:
Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by:
-
Samuel Ortiz authored
When the interface is down and one sets a WEP key from userspace, we should be able to simply cache it. Since that implies setting part of the profile's security settings, we now alloc/free the umac_profile at probe/remove time, and no longer at interface bring up/down time. Simply resetting it during the latter is enough. Signed-off-by:
-
Zhu Yi authored
The patch changes coexist periodic calibration priority flag. It also set wireless mode to UMAC and set PM control flag to 0x1. Signed-off-by:
-
Samuel Ortiz authored
This patch implements the new cfg80211 privacy related hooks: add/get/set_key and the set_default_key one. With this implementation we can now call the wext-compat *encode* routines and reduce our own wext code. Signed-off-by:
-
Samuel Ortiz authored
When we're calling iwm_send_wifi_if_cmd() with the resp flag set, we're currently waiting on the mlme queue, waiting for some flags here and there to show up. This patch adds a wifi_ntfy bitmap, and when we're sending a wifi_if command expecting an answers, we wait synchronously for it to show up, on a dedicated queue. The wifi_ntfy bit is set when we receive the corresponding answer. Signed-off-by:
-
Samuel Ortiz authored
While associated, we have to invalidate our key cache if we clear our BSSID through siwap. Signed-off-by:
-
Wey-Yi Guy authored
After 4965, tx_power_calibration moved from driver to uCode. remove "disable_tx_power" from debugfs to minimize the confusion. Signed-off-by:
Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by:
Reinette Chatre <reinette.chatre@intel.com> Signed-off-by:
-
Wey-Yi Guy authored
max_nrg_cck value inside the sensitivity range structure is not needed for sensitivity calibration. Keep the parameter in sensitivity structure but set the value to "0" in case needed in the future implementation. Signed-off-by:
-
Wey-Yi Guy authored
In 5150 there is a long delay between the AGC(Automatic Gain Control) command till the RF is stabilized causing us to miss detections when there was adjacent channel noise, so we need to adjusted the Sensitivity calibration for 5150 differently. Signed-off-by:
-
Luciano Coelho authored
With shorter CAM timeouts, the logs get flooded with "psm enabled" and "psm disabled traces. This patch changes it from wl1251_info to wl1251_debug, so they are only shown if DEBUF_PSM is enabled. Signed-off-by:
Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by:
Janne Ylalehto <janne.ylalehto@nokia.com> Signed-off-by:
Kalle Valo <kalle.valo@nokia.com> Signed-off-by:
-
Kalle Valo authored
drivers/net/wireless/wl12xx/wl1251_main.c:158: WARNING: braces {} are not necessary for single statement blocks Signed-off-by: -
Kalle Valo authored
Last we can change all code prefixes from wl12xx/WL12XX to wl1251/WL1251. Signed-off-by:
Vidhya Govindan <vidhya.govindan@nokia.com> Reviewed-by:
-
Kalle Valo authored
The function declaration is a leftover from some earlier, already removed, code. Signed-off-by:
-
Kalle Valo authored
wl12xx.h is now only used by 1251 code, so we can rename it. Signed-off-by:
-
Kalle Valo authored
Now that all 1271 files are split, we can add wl1251_ prefix to the files. Signed-off-by:
-
Kalle Valo authored
We don't want to have any 1271 code in wl1251. Signed-off-by:
-
Kalle Valo authored
Rename driver to wl1251.ko in preparation for wl1271 driver. Signed-off-by:
-
Kalle Valo authored
In preparation to split wl12xx to wl1251 and wl1271. Signed-off-by:
-
Juuso Oikarinen authored
Add implementation to use chipset specific join commands. Signed-off-by:
Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by:
-
Vidhya Govindan authored
The patch "wl12xx: cmd and acx interface rework" failed to assign MSDU lifetime value in wl12xx_acx_rx_msdu_life_time() and breaks the functionality. This patch fixes the regression by assigning the correct value. Signed-off-by:
-
Kalle Valo authored
ELP mode is working now, let's enable it so that the firmware can sleep and reduce power consumption. Signed-off-by:
-
Kalle Valo authored
Check the return call from wl12xx_ps_elp_wakeup() and bail out if it fails. This shouldn't happen, but if does there's a fundamental low level issue. Signed-off-by:
-
Kalle Valo authored
The wakeup call was done too deep in code path, it's better to wakeup chip from higher levels. This will also reduce wakeup calls significantly. Signed-off-by:
-
Kalle Valo authored
The function doesn't lock the mutex before sending the acx. Signed-off-by:
-
Ari Kauppi authored
CMD_TEST via netlink API has been broken since e29c3f59cfbc38c3b481a2694b08962da19c4664: cmd and acx interface rework. The user of the interface sends the request in a buffer without the wl12xx_command header but expects the response to have the wl12xx_command header (with id and status). This patch reverts the e29c3f5 commit for cmd.c:wl12xx_cmd_test and implements the needed wrapper functionality in netlink.c. Now the API of wl12xx_cmd_test and rest of wl12xx_cmd_* commands in cmd.c are similar. Signed-off-by:
Ari Kauppi <Ext-Ari.Kauppi@nokia.com> Signed-off-by:
-
Ari Kauppi authored
A warning message in wl12xx_acx_event_mbox_mask has a copy/paste error. Fix it to print the correct acx command. Signed-off-by:
-
Juuso Oikarinen authored
Add support for block reading (multiple bytes) from a fixed chipset register address. This is required for the wl1271 TX data path. Signed-off-by:
-
Juuso Oikarinen authored
Moved wl1251 TX path implementation into chip specific files to enable parallel implementation for the wl1271 TX path. Signed-off-by:
-
Luciano Coelho authored
Changed the function wl12xx_acx_wake_up_conditions() so that it receives an argument with the actual wake up condition, instead of having WAKE_UP_EVENT_DTIM_BITMAP hardcoded. This is needed because we have to use different conditions in 1271. Signed-off-by:
-
Luciano Coelho authored
In the wl1271 implementation, we need to read memory from the register partition using fixed addresses. This change adds the possibility to request fixed address when calling wl12xx_spi_read() or wl12xx_spi_reg_read(). Signed-off-by:
-
Luciano Coelho authored
This patch adds the code that recognizes the new WL1271 chip revision (PG 2.0). Full support for this chip is not yet implemented and support for WL1271 PG 1.0 is not guaranteed anymore. Signed-off-by:
-
Luciano Coelho authored
With WL1271, the firmware version can only be read right after booting the chip. To keep WL1251 aligned with this procedure, the code that reads the firmware version initially has been moved to a common place where it can be read from both chipsets. Signed-off-by:
-
Luciano Coelho authored
In some cases we need to read more than 32 bits from the register area. These functions were added to support that, like the existing wl12xx_spi_mem_read() and wl12xx_spi_mem_write() already do for large blocks in the memory area. Signed-off-by:
-
Juuso Oikarinen authored
The chipset source interrupt source configuration during fw wakeup was blocking interrupts on the wl1271. The configuration is effectively unused here as it is used to trigger an interrupt for the chipset wake-up event, which is not handled, or waited for, in the fw wakeup anyway on either wl1251 or wl1271. Signed-off-by:
-
Kalle Valo authored
Rx descriptor was incorrectly allocated from stack, use struct wl12xx instead. Needed for DMA transfers. Signed-off-by:
-
Kalle Valo authored
As a side effect the transfer is now DMA safe. Signed-off-by:
-
Kalle Valo authored
Needed for DMA transfers. Signed-off-by:
-
Kalle Valo authored
Needed for DMA safe transfers. Signed-off-by:
-
Kalle Valo authored
This is now DMA safe. Signed-off-by:
-
