- 21 May, 2010 40 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: (577 commits) Staging: ramzswap: Handler for swap slot free callback swap: Add swap slot free callback to block_device_operations swap: Add flag to identify block swap devices Staging: vt6655: use ETH_FRAME_LEN macro instead of custom one Staging: vt6655: use ETH_DATA_LEN macro instead of custom one Staging: vt6655: use ETH_FCS_LEN macro instead of custom one Staging: vt6656: use ETH_HLEN macro instead of custom one Staging: comedi: quatech_daqp_cs.c Replace eos semaphore with a completion. Staging: dt3155v4l: remove private memory allocator Staging: crystalhd: Remove typedefs from driver Staging: winbond: Fix for pointer name format issue in mds.c Staging: vt6656: removed custom UCHAR/USHORT/UINT/ULONG/ULONGLONG typedefs Staging: vt6656: removed custom CHAR/SHORT/INT/LONG typedefs Staging: comedi: Altered the way printk is used in 8255.c staging: iio: adis16350 and similar IMU driver Staging: iio: max1363 Fix two bugs in single_channel_from_ring Staging: iio: adis16220 extract bin_attribute structures from state Staging: iio: adis16220 vibration sensor driver Staging: comedi: Kconfig dependancy fixes Staging: comedi: fix up build error from last Kconfig changes ...
-
git://git.kernel.dk/linux-2.6-blockLinus Torvalds authored
* 'for-2.6.35' of git://git.kernel.dk/linux-2.6-block: (86 commits) pipe: set lower and upper limit on max pages in the pipe page array pipe: add support for shrinking and growing pipes drbd: This is now equivalent to drbd release 8.3.8rc1 drbd: Do not free p_uuid early, this is done in the exit code of the receiver drbd: Null pointer deref fix to the large "multi bio rewrite" drbd: Fix: Do not detach, if a bio with a barrier fails drbd: Ensure to not trigger late-new-UUID creation multiple times drbd: Do not Oops when C_STANDALONE when uuid gets generated writeback: fix mixed up arguments to bdi_start_writeback() writeback: fix problem with !CONFIG_BLOCK compilation block: improve automatic native capacity unlocking block: use struct parsed_partitions *state universally in partition check code block,ide: simplify bdops->set_capacity() to ->unlock_native_capacity() block: restart partition scan after resizing a device buffer: make invalidate_bdev() drain all percpu LRU add caches block: remove all rcu head initializations writeback: fixups for !dirty_writeback_centisecs writeback: bdi_writeback_task() must set task state before calling schedule() writeback: ensure that WB_SYNC_NONE writeback with sb pinned is sync drivers/block/drbd: Use kzalloc ...
-
git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds authored
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (25 commits) MIPS: Use GCC __builtin_prefetch() to implement prefetch(). MIPS: Octeon: Serial port fixes for OCTEON simulator. MIPS: Octeon: Get rid of early serial. MIPS: AR7: prevent race between clock initialization and devices registration MIPS: AR7: use ar7_has_high_vlynq() to determine watchdog base address MIPS: BCM63xx: Avoid namespace clash on GPIO_DIR_{IN,OUT} MIPS: MTX-1: Update defconfig MIPS: BCM47xx: Update defconfig MIPS: RB532: Update defconfig MIPS: AR7: Update defconfig RTC: rtc-cmos: Fix binary mode support MIPS: Oprofile: Loongson: Cleanup the comments MIPS: Oprofile: Loongson: Cleanup of the macros MIPS: Oprofile: Loongson: Remove unused variable from loongson2_cpu_setup() MIPS: Oprofile: Loongson: Remove useless parentheses MIPS: Oprofile: Loongson: Unify macro for setting events MIPS: nofpu and nodsp only affect CPU0 MIPS: Clean up tables for bootmem allocation MIPS: Coding style cleanups of access of FCSR rounding mode bits MIPS: Loongson 2F: Add gpio/gpioilb support ...
-
Randy Dunlap authored
Fix kernel-doc warnings, kernel-doc special characters, and typos in recent kernel/sysctl.c additions. Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Cc: Amerigo Wang <amwang@redhat.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://gitorious.org/linux-omap-dss2/linuxLinus Torvalds authored
* 'for-linus' of git://gitorious.org/linux-omap-dss2/linux: (23 commits) OMAP: DSS2: Fix omap_dss_probe() error path OMAP: DSS2: omap_dss_probe() conditional compilation cleanup board-omap3-beagle: add DSS2 support OMAP2: DSS: Add missing line for update bg color OMAP3630: DSS2: Updating MAX divider value OMAP: RX51: Update board defconfig OMAP: DSS2: Add ACX565AKM Panel Driver OMAP: RX51: Add Touch Controller in SPI board info OMAP: RX51: Add LCD Panel support OMAP: DSS2: TPO-TD03MTEA1: fix Kconfig dependency OMAP: LCD LS037V7DW01: Add Backlight driver support OMAP: DSS2: Taal: Fix DSI bus locking problem OMAP: DSS2: Taal: add mutex to protect panel data OMAP: DSS2: Make partial update width even OMAP: DSS2: Fix device disable when driver is not loaded OMAP: DSS2: VENC: don't call platform_enable/disable() twice OMAP: DSS2: check lock_fb_info() return value OMAP: DSS2: fix lock_fb_info() and omapfb_lock() locking order OMAP: DSS2: Use vdds_sdi regulator supply in SDI OMAP: DSS2: Remove redundant enable/disable calls from SDI ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (46 commits) random: simplify fips mode crypto: authenc - Fix cryptlen calculation crypto: talitos - add support for sha224 crypto: talitos - add hash algorithms crypto: talitos - second prepare step for adding ahash algorithms crypto: talitos - prepare for adding ahash algorithms crypto: n2 - Add Niagara2 crypto driver crypto: skcipher - Add ablkcipher_walk interfaces crypto: testmgr - Add testing for async hashing and update/final crypto: tcrypt - Add speed tests for async hashing crypto: scatterwalk - Fix scatterwalk_done() test crypto: hifn_795x - Rename ablkcipher_walk to hifn_cipher_walk padata: Use get_online_cpus/put_online_cpus in padata_free padata: Add some code comments padata: Flush the padata queues actively padata: Use a timer to handle remaining objects in the reorder queues crypto: shash - Remove usage of CRYPTO_MINALIGN crypto: mv_cesa - Use resource_size crypto: omap - OMAP macros corrected padata: Use get_online_cpus/put_online_cpus ... Fix up conflicts in arch/arm/mach-omap2/devices.c
-
git://codeaurora.org/quic/kernel/dwalker/linux-msmLinus Torvalds authored
* 'msm-video' of git://codeaurora.org/quic/kernel/dwalker/linux-msm: drivers: video: msm: add include msm_mdp.h drivers: video: msm: default to no
-
git://codeaurora.org/quic/kernel/dwalker/linux-msmLinus Torvalds authored
* 'msm-mmc_sdcc' of git://codeaurora.org/quic/kernel/dwalker/linux-msm: drivers: mmc: msm_sdcc: Add EMBEDDED_SDIO support mmc: msm_sdcc: Fix issue where clocks could be disabled mid transaction mmc: msm_sdcc: Fix the dma exec function to use the proper delays mmc: msm_sdcc: Don't set host->curr.mrq until after we're sure the busclk timer won't fire mmc: msm_sdcc: Enable busclk idle timer for power savings mmc: msm_sdcc: Don't disable interrupts while suspending mmc: msm_sdcc: Fix issue where we might not end a sucessfull request mmc: msm_sdcc: Featurize busclock power save and disable it by default mmc: msm_sdcc: Fix bug where busclk expiry timer was not properly disabled mmc: msm_sdcc: Reduce command timeouts and improve reliability. mmc: msm_sdcc: Schedule clock disable after probe mmc: msm_sdcc: Wrap readl/writel calls with appropriate clk delays mmc: msm_sdcc: Driver clocking/irq improvements msm: Add 'execute' datamover callback mmc: msm_sdcc: Snoop SDIO_CCCR_ABORT register mmc: msm_sdcc: Clean up clock management and add a 10us delay after enabling clocks
-
David Daney authored
GCC's __builtin_prefetch() was introduced a long time ago, all supported GCC versions have it. Lets do what the big boys up in linux/prefetch.h do, except we use '1' as the third parameter to provoke 'PREF 0,...' and 'PREF 1,...' instead of other prefetch hints. This allows for better code generation. In theory the existing embedded asm could be optimized, but the compiler has these builtins, so there is really no point. Signed-off-by:
David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1235/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
David Daney authored
For the simulator, fake a slow clock to get fast output. In prom_putchar we have to mask the value so the simulator doesn't ASSERT when printing non-ASCII characters. Signed-off-by:
-
David Daney authored
Get rid of early_serial_setup, we use CONFIG_EARLY_PRINTK instead. Signed-off-by:
-
Florian Fainelli authored
ar7_regiser_devices needs ar7_clocks_init to have been called first, however clock.o is currently linked later due to its order in the Makefile, therefore ar7_clocks_init always gets called later than ar7_register_devices because both have the same initcall level. Fix this by moving ar7_register_devices to the right initcall level. Reported-by:
Michael J. Evans <mjevans1983@gmail.com> Signed-off-by:
Florian Fainelli <florian@openwrt.org> To: linux-mips@linux-mips.org Cc: Ralf Baechle <ralf@linux-mips.org> Patchwork: http://patchwork.linux-mips.org/patch/1212/Signed-off-by:
-
Florian Fainelli authored
Instead of doing yet another switch/case on the chip_id, use existing inline function to set the watchdog base address. Signed-off-by:
-
Florian Fainelli authored
This is too generic a name, so prefix it with BCM63XX_ to avoid potential namespace clashes when including <asm/gpio.h>. Signed-off-by:
Florian Fainelli <ffainelli@freebox.fr> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1171/Signed-off-by:
-
Florian Fainelli authored
Updates the 4G Systems MTX-1 defconfig, and remove systems unavailable on this platform. Changes include: - built-in MTD char/block support - GPIO sysfs support - MTX-1 watchdog driver - I2C over GPIO driver as a module - SquashFS support Signed-off-by:
-
Florian Fainelli authored
Update Broadcom BCM47xx defconfig with: - tiny RCU - BCM47xx watchdog driver - b43/b43legacy wireless as modules - SSB Gigabit Ethernet driver - disabled IRDA 6igned-off-by: Florian Fainelli <florian@openwrt.org> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1167/Signed-off-by:
-
Florian Fainelli authored
This updates the Mikrotik RB532 defconfig with: - tiny RCU - RB532 input buttons driver - RB532 LED driver - RC32434 watchdog driver - GPIO sysfs support - Wireless support - SquashFS support - more LED triggers Signed-off-by:
-
Florian Fainelli authored
Update Texas Instruments AR7 defconfig with: - tiny RCU - LEDs GPIO - disable SSB - enable zboot support - enable GPIO sysfs support Signed-off-by:
-
Arnaud Patard authored
As a follow-up to the thread about RTC support for some Loongson 2E/2F boards, this patch tries to address the "REVISIT"/"FIXME" comments about rtc binary mode handling and allow rtc to work with rtc in binary mode. I've also raised the message about 24-h mode not supported to warning otherwise, one may end up with no rtc without any message in the kernel log. Signed-off-by:
Arnaud Patard <apatard@mandriva.com> To: linux-mips@linux-mips.org To: rtc-linux@googlegroups.com Cc: david-b@pacbell.net Cc: a.zummo@towertech.it Cc: akpm@linux-foundation.org Patchwork: http://patchwork.linux-mips.org/patch/1158/Signed-off-by:
-
Wu Zhangjin authored
Removes some out-of-date comments and empty lines. Signed-off-by:
Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1204/Signed-off-by:
-
Wu Zhangjin authored
The _EXL, _KERNEL etc. bits are in the performance control register so use _PERFCTRL prefix instead of _PERFCNT. While at it make the macro more readable, use _ENABLE instead of _INT_EN suffix to describe the interrupt enable bit. Signed-off-by:
-
Wu Zhangjin authored
Signed-off-by:
-
Wu Zhangjin authored
Signed-off-by:
-
Wu Zhangjin authored
Unified macro for counter0 and counter1 to set the event in the control register. This will be needed by Perf. Signed-off-by:
-
Kevin Cernekee authored
The "nofpu" and "nodsp" kernel command line options currently do not affect CPUs that are brought online later in the boot process or hotplugged at runtime. It is desirable to apply the nofpu/nodsp options to all CPUs in the system, so that surprising results are not seen when a process migrates from one CPU to another. [Ralf: Moved definitions of mips_fpu_disabled, fpu_disable, mips_dsp_disabled and dsp_disable from setup.c to cpu-probe.c to allow making mips_fpu_disabled and mips_dsp_disabled static.] Signed-off-by:
Kevin Cernekee <cernekee@gmail.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: http://patchwork.linux-mips.org/patch/1169/Signed-off-by:
-
David VomLehn authored
Modifications to the boot memory allocation structures to make them easier to read and maintain. Note that this will not pass checkpatch because it wants a structure element initializer to be enclosed in a do {...} while(...), which is obvious nonsensical. Signed-off-by:David VomLehn <dvomlehn@cisco.com> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1207/Signed-off-by:
-
Shane McDonald authored
Replaces references to the magic number 0x3 with constants and macros indicating the real purpose of those bits. They are the rounding mode bits of the FCSR register. Signed-off-by:
Shane McDonald <mcdonald.shane@gmail.com> To: anemo@mba.ocn.ne.jp To: kevink@paralogos.com To: linux-mips@linux-mips.org To: sshtylyov@mvista.com Patchwork: http://patchwork.linux-mips.org/patch/1206/Signed-off-by:
-
Arnaud Patard authored
Signed-off-by:
-
Manuel Lauss authored
Add a sysdev for DBDMA PM. Signed-off-by:
Manuel Lauss <manuel.lauss@gmail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: http://patchwork.linux-mips.org/patch/1119/Signed-off-by:
-
Manuel Lauss authored
Use a sysdev to implement PM methods for the Au1000 interrupt controllers. Signed-off-by:
-
Manuel Lauss authored
Clean out stray unused board_reset() calls in pb1x boards, the PB1000 is different from the rest and gets private methods. (Cleanup after 32fd6901) Signed-off-by:
-
Wu Zhangjin authored
Loongson doesn't support MIPSR2, therefore, MIPSR2 vectored interrupts (cpu_has_vint) and MIPSR2 external interrupt controller mode (cpu_has_veic) are 0. Signed-off-by:
-
Julia Lawall authored
From: Julia Lawall <julia@diku.dk> Use set_cpus_allowed_ptr rather than set_cpus_allowed. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression E1,E2; @@ - set_cpus_allowed(E1, cpumask_of_cpu(E2)) + set_cpus_allowed_ptr(E1, cpumask_of(E2)) @@ expression E; identifier I; @@ - set_cpus_allowed(E, I) + set_cpus_allowed_ptr(E, &I) // </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> To: peterz@infradead.org To: mingo@elte.hu To: tglx@linutronix.de To: oleg@redhat.com To: linux-mips@linux-mips.org To: linux-kernel@vger.kernel.org To: kernel-janitors@vger.kernel.org Patchwork: http://patchwork.linux-mips.org/patch/1087/Signed-off-by:
-
Greg Kroah-Hartman authored
Conflicts: drivers/staging/arlan/arlan-main.c drivers/staging/comedi/drivers/cb_das16_cs.c drivers/staging/cx25821/cx25821-alsa.c drivers/staging/dt3155/dt3155_drv.c drivers/staging/hv/hv.c drivers/staging/netwave/netwave_cs.c drivers/staging/wavelan/wavelan.c drivers/staging/wavelan/wavelan_cs.c drivers/staging/wlags49_h2/wl_cs.c This required a bit of hand merging due to the conflicts that happened in the later .34-rc releases, as well as some staging driver changing coming in through other trees (v4l and pcmcia). Signed-off-by:Greg Kroah-Hartman <gregkh@suse.de>
-
Jens Axboe authored
Conflicts: fs/ext3/fsync.c Signed-off-by:Jens Axboe <jens.axboe@oracle.com>
-
Jens Axboe authored
We need at least two to guarantee proper POSIX behaviour, so never allow a smaller limit than that. Also expose a /proc/sys/fs/pipe-max-pages sysctl file that allows root to define a sane upper limit. Make it default to 16 times the default size, which is 16 pages. Signed-off-by: -
Jens Axboe authored
This patch adds F_GETPIPE_SZ and F_SETPIPE_SZ fcntl() actions for growing and shrinking the size of a pipe and adjusts pipe.c and splice.c (and relay and network splice) usage to work with these larger (or smaller) pipes. Signed-off-by: -
Philipp Reisner authored
Signed-off-by:
Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by:
Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by:
-
Philipp Reisner authored
Signed-off-by:
-
Philipp Reisner authored
Signed-off-by:
-
