Skip to content

L
linux
Switch branch/tag
  1. 20 Nov, 2017 6 commits
    • Johannes Berg's avatar
      cfg80211: initialize regulatory keys/database later · d7be102f
      Johannes Berg authored 
      When cfg80211 is built as a module, everything is fine, and we
can keep the code as is; in fact, we have to, because there can
only be a single module_init().

When cfg80211 is built-in, however, it needs to initialize
before drivers (device_initcall/module_init), and thus used to
be at subsys_initcall(). I'd moved it to fs_initcall() earlier,
where it can remain. However, this is still too early because at
that point the key infrastructure hasn't been initialized yet,
so X.509 certificates can't be parsed yet.

To work around this problem, load the regdb keys only later in
a late_initcall(), at which point the necessary infrastructure
has been initialized.

Fixes: 90a53e44 ("cfg80211: implement regdb signature checking")
Reported-by: default avatarXiaolong Ye <xiaolong.ye@intel.com>
Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
      d7be102f
    • Kees Cook's avatar
      mac80211: aggregation: Convert timers to use timer_setup() · 7cca2acd
      Kees Cook authored 
      In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.

This removes the tid mapping array and expands the tid structures to
add a pointer back to the station, along with the tid index itself.

Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: default avatarKees Cook <keescook@chromium.org>
[switch tid variables to u8, the valid range is 0-15 at most,
 initialize tid_tx->sta/tid properly]
Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
      7cca2acd
    • Johannes Berg's avatar
      nl80211: don't expose wdev->ssid for most interfaces · 44905265
      Johannes Berg authored 
      For mesh, this is simply wrong - there's no SSID, only the
mesh ID, so don't expose it at all.
For (P2P) client, it's wrong, because it exposes an internal
value that's only used when certain APIs are used.
For AP, it's actually the only correct case, so leave that.
All other interface types shouldn't be setting this anyway,
so there it won't change anything.

Fixes: b84e7a05 ("nl80211: send the NL80211_ATTR_SSID in nl80211_send_iface()")
Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
      44905265
    • Kees Cook's avatar
      mac80211: Convert timers to use timer_setup() · 34f11cd3
      Kees Cook authored 
      In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.

Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: default avatarKees Cook <keescook@chromium.org>
Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
      34f11cd3
    • Christophe JAILLET's avatar
      net: vxge: Fix some indentation issues · 32a72bbd
      Christophe JAILLET authored 
      Some statements are not enough or too much indented.
Fix it to improve readalbility.
Signed-off-by: default avatarChristophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      32a72bbd
    • Netanel Belgazal's avatar
      net: ena: fix race condition between device reset and link up setup · d18e4f68
      Netanel Belgazal authored 
      In rare cases, ena driver would reset and re-start the device,
for example, in case of misbehaving application that causes
transmit timeout

The first step in the reset procedure is to stop the Tx traffic by
calling ena_carrier_off().

After the driver have just started the device reset procedure, device
happens to send an asynchronous notification (via AENQ) to the driver
than there was a link change (to link-up state).
This link change is mapped to a call to netif_carrier_on() which
re-activates the Tx queues, violating the assumption of no tx traffic
until device reset is completed, as the reset task might still be in
the process of queues initialization, leading to an access to
uninitialized memory.
Signed-off-by: default avatarNetanel Belgazal <netanel@amazon.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d18e4f68
  3. 19 Nov, 2017 6 commits
    • Heiner Kallweit's avatar
      r8169: use same RTL8111EVL green settings as in vendor driver · b399a394
      Heiner Kallweit authored 
      Adjust the code to use the same green settings as in the latest
vendor driver.
Signed-off-by: default avatarHeiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      b399a394
    • Heiner Kallweit's avatar
      r8169: fix RTL8111EVL EEE and green settings · 1814d6a8
      Heiner Kallweit authored 
      Name of functions rtl_w0w1_eri and rtl_w0w1_phy is somewhat misleading
regarding order of arguments. One could assume that w0w1 means
argument with bits to be reset comes before argument with bits to set.
However this is not the case.
So fix the order of arguments in several statements.

In addition fix EEE advertisement. The current code resets the bits
for 100BaseT and 1000BaseT EEE advertisement what is not what we want.

I have a little of a hard time to find a proper "Fixes" line as the
issue seems to have been there forever (at least it existed already
when the driver was moved to the current place in 2011).

The patch was tested on a Zotac Mini-PC with a RTL8111E-VL chip.
Before the patch EEE was disabled, now it's properly advertised and
works fine.
Signed-off-by: default avatarHeiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      1814d6a8
    • Xin Long's avatar
      tun: fix rcu_read_lock imbalance in tun_build_skb · 654d5738
      Xin Long authored 
      rcu_read_lock in tun_build_skb is used to rcu_dereference tun->xdp_prog
safely, rcu_read_unlock should be done in every return path.

Now I could see one place missing it, where it returns NULL in switch-case
XDP_REDIRECT,  another palce using rcu_read_lock wrongly, where it returns
NULL in if (xdp_xmit) chunk.

So fix both in this patch.

Fixes: 761876c8 ("tap: XDP support")
Signed-off-by: default avatarXin Long <lucien.xin@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      654d5738
    • Neal Cardwell's avatar
      tcp: when scheduling TLP, time of RTO should account for current ACK · ed66dfaf
      Neal Cardwell authored 
      Fix the TLP scheduling logic so that when scheduling a TLP probe, we
ensure that the estimated time at which an RTO would fire accounts for
the fact that ACKs indicating forward progress should push back RTO
times.

After the following fix:

df92c839 ("tcp: fix xmit timer to only be reset if data ACKed/SACKed")

we had an unintentional behavior change in the following kind of
scenario: suppose the RTT variance has been very low recently. Then
suppose we send out a flight of N packets and our RTT is 100ms:

t=0: send a flight of N packets
t=100ms: receive an ACK for N-1 packets

The response before df92c839 that was:
  -> schedule a TLP for now + RTO_interval

The response after df92c839 is:
  -> schedule a TLP for t=0 + RTO_interval

Since RTO_interval = srtt + RTT_variance, this means that we have
scheduled a TLP timer at a point in the future that only accounts for
RTT_variance. If the RTT_variance term is small, this means that the
timer fires soon.

Before df92c839 this would not happen, because in that code, when
we receive an ACK for a prefix of flight, we did:

    1) Near the top of tcp_ack(), switch from TLP timer to RTO
       at write_queue_head->paket_tx_time + RTO_interval:
            if (icsk->icsk_pending == ICSK_TIME_LOSS_PROBE)
                   tcp_rearm_rto(sk);

    2) In tcp_clean_rtx_queue(), update the RTO to now + RTO_interval:
            if (flag & FLAG_ACKED) {
                   tcp_rearm_rto(sk);

    3) In tcp_ack() after tcp_fastretrans_alert() switch from RTO
       to TLP at now + RTO_interval:
            if (icsk->icsk_pending == ICSK_TIME_RETRANS)
                   tcp_schedule_loss_probe(sk);

In df92c839 we removed that 3-phase dance, and instead directly
set the TLP timer once: we set the TLP timer in cases like this to
write_queue_head->packet_tx_time + RTO_interval. So if the RTT
variance is small, then this means that this is setting the TLP timer
to fire quite soon. This means if the ACK for the tail of the flight
takes longer than an RTT to arrive (often due to delayed ACKs), then
the TLP timer fires too quickly.

Fixes: df92c839 ("tcp: fix xmit timer to only be reset if data ACKed/SACKed")
Signed-off-by: default avatarNeal Cardwell <ncardwell@google.com>
Signed-off-by: default avatarYuchung Cheng <ycheng@google.com>
Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
Acked-by: default avatarSoheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ed66dfaf
    • Gustavo A. R. Silva's avatar
      usbnet: ipheth: fix potential null pointer dereference in ipheth_carrier_set · 61c59355
      Gustavo A. R. Silva authored 
      _dev_ is being dereferenced before it is null checked, hence there
is a potential null pointer dereference.

Fix this by moving the pointer dereference after _dev_ has been null
checked.

Addresses-Coverity-ID: 1462020
Fixes: bb1b40c7 ("usbnet: ipheth: prevent TX queue timeouts when device not ready")
Signed-off-by: default avatarGustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      61c59355
    • Alexey Kodanev's avatar
      gre6: use log_ecn_error module parameter in ip6_tnl_rcv() · 981542c5
      Alexey Kodanev authored 
      After commit 308edfdf ("gre6: Cleanup GREv6 receive path, call
common GRE functions") it's not used anywhere in the module, but
previously was used in ip6gre_rcv().

Fixes: 308edfdf ("gre6: Cleanup GREv6 receive path, call common GRE functions")
Signed-off-by: default avatarAlexey Kodanev <alexey.kodanev@oracle.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      981542c5
  5. 18 Nov, 2017 28 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7