The attached patch does two things:

 (1) We no longer check the return value of file->f_op->get_unmapped_area()
     unless we actually called it. We know addr is zero otherwise because
     we'd've given an error earlier if it wasn't.

 (2) If -ENOSYS was returned by that operation, then we assume we actually
     called a driver (such as the framebuffer driver) that might want to
     invoke the operation in a lower level driver (such as matroxfb) if one
     exists, and that it found that one didn't.

     We translate the -ENOSYS error into -ENODEV - the error we would have
     given if the operation was not supplied in the file ops.

     Doing this permits us an opportunity for arch_get_unmapped_area() or
     something else to be called if we want that to happen, particularly in
     the MMU case.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-Off-By: Linus Torvalds <torvalds@osdl.org>

More of the Guninski "copy_to_user() takes a size_t" series.

Write access cannot safely be allowed as NFS doesn't support append, but read
access should be ok.
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

As readdir returns the reply in a separate page, the cache code cannot find
the reply (and it would probably be too big anyway) so flag readdir for NOCACHE
Signed-off-by: Olaf Kirch <okir@suse.de>
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

If we detect an overlap, we set a flag and wait for a wakeup.  When requests
are handled, if the flag was set, we perform the wakeup.

Note that the code currently in -mm is badly broken.  With this patch applied,
it passes tests the use O_DIRECT to cause lots of overlapping requests.
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

copy_data currently loops over bio's in a list, but the caller also does the
same looping, sometimes with extra work.  So remove the loop from copy_data.
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

If the resync checkpoint for an array is at the end of the array, It doesn't
get set to MAX_SECTOR, so resyncing will be retried.  By updating curr_resync
early, this problem is fixed.
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

- set ->devfs_name
- create initial devfs names slightly differently so
  as not to conflict
- re-read partition table when an array is assembled at boot
  time - not sure why this is needed, but it is.
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

hot_add_disk and hot_remove_disk check mddev->pers before proceeding.
set_disk_faulty should too.
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

- off-by-one error
- missing recalc of checksum
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

into ppc970.osdl.org:/home/torvalds/v2.6/linux

into kernel.bkbits.net:/home/davem/sparc-2.6

The qlogic driver complains about the use of smp_processor_id() in
preemptible code.  And it's right.

But it's just for an affinity optimisation and we can validly quash the
warning.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This patch had fixed the following warning.

arch/mips/lib-32/dump_tlb.c: In function 'dump_tlb':
arch/mips/lib-32/dump_tlb.c:69: warning: control may reach end of non-void function 'msk2str' being inlined

This patch adds return value, when page size is not match.
Signed-off-by: Yoichi Yuasa <yuasa@hh.iij4u.or.jp>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

We presently deadlock in low-latency mode because the receive code holds
port.lock while calling into the tty code to perform echoing.  The tty code
calls back into the driver, which then takes port.lock.

Fix that by dropping the lock around the echo call.
Acked-by: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Add the missing "lock" prefix in switch_to macro.
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Frank Fricke reported that hostfs does not verify that a chmod +s, for
instance, is done by a sufficiently privileged user, as long as the UML
kernel itself can complete the operation on the host.

So, for instance, if UML is run as root and under /mnt/host we have a hostfs
mount, this works successfully:

paolo@zion:~ (0)$ chmod 4755 /mnt/host/bin/bash
paolo@zion:~ (0)$ ll /mnt/host/bin/bash

 -rwsr-xr-x  1 root root 662724 2004-10-20 02:15 /mnt/host/bin/bash*

(bash refuses running as setuid, but you could have another shell on the
host, as dash or whatever).

In general, if UML is run as uid 500 on the host, a hostfs mount is done
and under the hostfs mount there is a file with uid 500 on the host, I can
freely make it setuid (if it's executable).

This is especially bad when UML is run as root (which you should not do),
but is a problem in general, since it allows any user to create setuid 500
(in this example) executables on the host filesystem.

Finally, while I was looking at the chmod() implementation, I spotted a
kludge in the code and explained it with a comment.
Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Cc: Frank 'xraz' Fricke <xraz@rwxr-xr-x.de>
Cc: Alexander Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Descend into arch/um/kernel/skas/util during make clean.
Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

When a task is put to sleep, it is dequeued from the runqueue while it is
still running.  The problem is that one some arches that have non-atomic
scheduling, the runqueue lock can be dropped and retaken in schedule() before
the task actually schedules off, and wait_task_inactive did not account for
this.
Signed-off-by: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Fix for resume on i850. Maybe for i855GM.

Signed-off by: Nigel Cunningham <ncunningham@linuxmail.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

filemap_populate needs to be exported so that filesystems with their own
vm_operations (like XFS) can use it.

Cc: Nathan Scott <nathans@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Signed-off-by: David S. Miller <davem@davemloft.net>

Noted by David Woodhouse <dwmw2@infradead.org>

Here's a fix for the ppc64 crash during boot.  This corrects the
offending function to use more conventional error codes.  I'll follow up
with return code cleanups for the entire module, and for RTAS code,
since these are probably too big for 2.6.11. 
Signed-off-by: John Rose <johnrose@austin.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Signed-off-by: David S. Miller <davem@davemloft.net>

into nuts.davemloft.net:/disk1/BK/sparc-2.6

Noticed by Jurij Smakov <jurij@wooyd.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The fix was just trying to hide the real bug, which was in
an old udev script. The change made matters worse.

Cset exclude: pavenis@latnet.lv[torvalds]|ChangeSet|20050202164823|05506

mousedev_packet() clears list->ready too early when called with
"tail == head - 1".  The effect is that the last mouse event from the
hardware isn't reported to userspace until another hardware mouse
event arrives.  This can make the left mouse button get stuck when
tapping on a touchpad.  When this happens, the butten doesn't unstick
until you interact with the touchpad again.
Signed-off-by: Peter Osterlund <petero2@telia.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

into ppc970.osdl.org:/home/torvalds/v2.6/linux

into ppc970.osdl.org:/home/torvalds/v2.6/linux

into ppc970.osdl.org:/home/torvalds/v2.6/linux

into ppc970.osdl.org:/home/torvalds/v2.6/linux

As 'i' and 'host->id' are of different types (signed vs. unsigned),
we need a cast.

Eventually host->id should probably be made unsigned, but this
requires further analysis.

into kernel.bkbits.net:/home/davem/net-2.6

into pobox.com:/garz/repo/libata-2.6

strcpy is undefined if src and dest overlap.  That's clearly possible
here with a sufficiently deep path on the server.  Use memmove instead.
Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil>
Signed-off-by: David S. Miller <davem@davemloft.net>