Pull "Qualcomm ARM Based Device Tree Updates for v4.4" from Andy Gross:

* Add DT binding document for SMEM
* Add SMD, RPM, and Regulator nodes on MSM8974
* Remove extra reg element from iadc device
* Remove redunandant i2c pinctrl properties on APQ8064
* Remove unnecessary eeprom label on IFC6410
* Remove unnecessary eeprom label from QS600
* Add PM8921 RTC support on APQ8064
* Add PM8921 pwrkey support on APQ8064
* Prefix GSBI6 uart pins on APQ8064 correctly
* Add missing GSBI7 uart pinctrl on APQ8064
* Add missing GSBI7 uart pinctrl on IFC6410
* Add missing GSBI7 pinctrl uart property on QS600
* Add pwrseq support for WLAN on IFC6410
* Add pwrseq support for WLAN on QS600
* Add notify led support on IFC6410
* Add SD card detect support onQS600
* Add #power-domain-cells property to documentation
* Add Qualcomm SMBB binding document
* Add PM8941 charge node
* Fix typo in disabled property on MSM8974

* tag 'qcom-dt-for-4.4' of git://codeaurora.org/quic/kernel/agross-msm:
  ARM: dts: msm8974: fix typo in "disabled" property
  ARM: dts: qcom-pm8941: Add charger node
  dt-binding: power: Add Qualcomm SMBB binding
  arm: dts: qcom: Add #power-domain-cells property
  ARM: dts: qs600: Add SD card detect support.
  ARM: dts: apq8064-ifc6410: add notify led support.
  ARM: dts: qs600: add pwrseq support to WLAN
  ARM: dts: ifc6410: Add pwrseq support for WLAN
  ARM: dts: qs600: Add missing pinctrl property for gsbi7 uart
  ARM: dts: ifc6410: Add missing pinctrl to gsbi7 uart
  ARM: dts: apq8064: add missing gsbi7 uart pinctrl
  ARM: dts: apq8064: Prefix the gsbi6 uart pins correctly
  ARM: dts: apq8064: add pm8921 pwrkey support
  ARM: dts: apq8064: add pm8921 rtc
  ARM: dts: qs600: remove unnecessary eeprom label
  ARM: dts: ifc6410: remove unnecessary eeprom label
  ARM: dts: apq8064: remove redundant i2c pinctrl properties
  ARM: dts: qcom: Remove extra reg element from iadc device
  ARM: dts: msm8974: Add smd, rpm and regulator nodes
  soc: qcom: Add device tree binding for SMEM

The Juno motherboard has a NOR flash on the motherboard, enable
this to be accessed with the CFI flash driver. Results after
enabling MTD, MTD_CFI, MTD_PHYSMAP, MTD_PHYSMAP_OF,
MTD_CFI_INTELEXT:

8000000.flash: Found 2 x16 devices at 0x0 in 32-bit bank.
Manufacturer ID 0x000089 Chip ID 0x008919
Intel/Sharp Extended Query Table at 0x010A
Intel/Sharp Extended Query Table at 0x010A
Intel/Sharp Extended Query Table at 0x010A
Intel/Sharp Extended Query Table at 0x010A
Intel/Sharp Extended Query Table at 0x010A
Using buffer write method
Using auto-unlock on power-up/resume
cfi_cmdset_0001: Erase suspend on write enabled
erase region 0: offset=0x0,size=0x40000,blocks=255
erase region 1: offset=0x3fc0000,size=0x10000,blocks=4

Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Liviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'renesas-dt2-for-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

Pull "Second Round of Renesas ARM Based SoC DT Updates for v4.4" from Simon Horman:

* Enable the following on the porter board:
  I2C2, PCI, PCIe, QSPI, SATA0, SDHI0/2, USB PHY and VIN0/ADV7180.

* tag 'renesas-dt2-for-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: porter: enable internal PCI and USB PHY
  ARM: shmobile: porter: enable PCIe
  ARM: shmobile: porter: add QSPI DT support
  ARM: shmobile: porter: add VIN0/ADV7180 DT support
  ARM: shmobile: porter: add I2C2 DT support
  ARM: shmobile: porter: enable SATA0
  ARM: shmobile: porter: add SDHI0/2 DT support

In UniPhier SoCs before ProXstream2 and PH1-LD6b, two address spaces
 0x00000000 - 0x0fffffff
 0x40000000 - 0x4fffffff
are both mapped to the external bus (also called system bus),
so either was OK.

In the newest two SoCs, the former (0x00000000 - 0x0fffffff) is
assigned for the serial NOR interface.

For the consistency, use the latter for all the SoCs.

Also, fix the range properties to reflect the real address mapping,
where the support card is located at the offset address 0x01f00000
of CS1 of the external bus.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'samsung-dt-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/dt

Merge "Samsung DT updates for v4.4" from Kukjin Kim:

- New board support
  : add exynos5250-snow-rev5 DT file to support Snow Rev5+ board
  : add exynos5422-odroidxu4 DT file to support Odroid XU4 board
  : split exynos5422-odroidxu3-audio DT file from odroidxu3-common

- USE GPIO constants for flags cells for exynos boards
- fix cpu compatible value to 'arm926ej-s' for s3c2416

- add DMA support for serial ports for exynos4
- add suspend opp for exynos4412
- remove regulator-compatible usage for exynos4412-trats2

- enable EC vboot context support for Peach boards
- move display-timings node to DP for exynos5250-arndale, smdk5250 and smdk5420

- for exynos4412-odroid/odroidu3
  : unify voltage regulator style and
  : remove redundant pinctrl settings
  : add pwm-fan node and use it as a colling device

- for exynos5422-odroidxu3
  : fix power off method and LEDs

- dt-bindings
  : grounded AC0KB pin on S2MPS11
  : entry how to use PWM FAN as a cooling device

* tag 'samsung-dt-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: (22 commits)
  ARM: dts: Use GPIO constants for flags cells in exynos5440 boards
  ARM: dts: Use GPIO constants for flags cells in exynos5420/5422/5800 boards
  ARM: dts: Use GPIO constants for flags cells in exynos4412 boards
  ARM: dts: Use GPIO constants for flags cells in exynos4120 boards
  ARM: dts: Use GPIO constants for flags cells in exynos3250 boards
  ARM: dts: Enable EC vboot context support on Peach boards
  ARM: dts: Remove regulator-compatible usage in exynos4412-trats2
  ARM: dts: Move display-timings node from fimd to dp in exynos5250-arndale, smdk5250 and smdk5420
  ARM: dts: Add Exynos5250 Snow Rev5+ support on exynos5250-snow-rev5
  ARM: dts: Unify voltage regulator style in exynos4412-odroid
  ARM: dts: Remove redundant pinctrl settings in exynos4412-odroid
  ARM: dts: Fix cpu compatible value for s3c2416
  ARM: dts: Add support Odroid XU4 board for exynos5422-odroidxu4
  ARM: dts: Split audio configuration to separate exynos5422-odroidxu3-audio
  ARM: dts: Fix power off method for exynos5422-odroidxu3-common
  dt-bindings: Document grounded ACOKB pin on S2MPS11
  ARM: dts: use pwm-fan device as a cooling device for exynos4412-odroidu3
  ARM: dts: Add pwm-fan node for exynos4412-odroidu3
  dt-bindings: Documentation entry to explain how to use PWM FAN as a cooling device
  ARM: dts: add suspend opp to exynos4412
  ...

Commit 9ccd6080 "arm64: dts: add device tree for ARM SMM-A53x2 on
LogicTile Express 20MG" added a new dts file to arch/arm64 which
included "../../../../arm/boot/dts/vexpress-v2m-rs1.dtsi", i.e. a
.dtsi supplied by arch/arm.

Unfortunately this causes some issues for the split device tree
repository[0], since things get moved around there. In that context
the new .dts ends up at src/arm64/arm/vexpress-v2f-1xv7-ca53x2.dts
while the include is at src/arm/vexpress-v2m-rs1.dtsi.

The sharing of the .dtsi is legitimate since the baseboard is the same
for various vexpress systems whatever processor they use.

Previously I attempted to resolve this by creating a shared location
for such things but we have been unable to come to a consensus on
where that should be.

Instead this patch simply replaces the use of ../../ in the dts
/include/ with a symlink in arch/arm64/boot/dts/arm pointing to the
file arch/arm/boot/dts.

Since the split device tree repo will shortly be required to flatten
symlinks for other reasons this will cause the dtsi file to appear in
both src/arm and src/arm64 in the split repo, which is an improvement
on not building for arm64 now.

[0] https://git.kernel.org/cgit/linux/kernel/git/devicetree/devicetree-rebasing.git/Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Kumar Gala <galak@codeaurora.org>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Kristina Martsenko <kristina.martsenko@arm.com>
Cc: Kevin Hilman <khilman@linaro.org>
Cc: Frank Rowand <frank.rowand@sonymobile.com>
Cc: Olof Johansson <olof@lixom.net>
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: arm@kernel.org
Cc: linux-kbuild@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Pull "ARM: DT: Hisilicon SoC DT updates for 4.4" from Wei Xu:

- Drop console= and earlyprintk bootargs parameter in hisilicon armv7 dts

* tag 'hisi-soc-dt-for-4.4' of git://github.com/hisilicon/linux-hisi:
  ARM: hisilicon: DT: Drop console= and earlyprintk bootargs parameter

The DTS erronously uses the wrong reg mapping and IRQ numbers for some
UART, WDT and timer nodes. Fix this.
Reported-by: John Wehle <john@feith.com>
Signed-off-by: Carlo Caione <carlo@endlessm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'sunxi-dt-for-4.4' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/dt

Pull "Allwinner DT changes for 4.4" from Maxime Ripard:

DT patches for the 4.4 merge window, most notably:
  - Enable the OTG controller on more boards
  - Create new DTSI for the q8's design
  - Added RSB support to the A23 and A33 SoCs
  - New boards: Olimex A20 EVB, Yones bs1078v2

Plus the usual random patches enabling and / or enhancing a few things in
particular boards.

* tag 'sunxi-dt-for-4.4' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: (59 commits)
  ARM: dts: sun6i: hummingbird: Drop AXP221 DC1SW and DC5LDO supplies
  ARM: dts: sun8i: sinlinx-sina33: Enable Reduced Serial Bus controller
  ARM: dts: sun8i: q8-common: Enable RSB controller for A23/A33 Q8 tablets
  ARM: dts: sun8i: Add Reduced Serial Bus controller device node to A23/A33 dtsi
  ARM: dts: sun4i: Add AXP209 PMU regulators for pcDuino1/2
  ARM: sun7i: dt: Add new Olimex A20 EVB device
  ARM: dts: sun6i: hummingbird: Add aliases for rtc devices
  ARM: dts: sun7i: Add dts file for Wits Pro A20 DKT
  ARM: dts: sun7i: Enable USB DRC on Wexler TAB7200
  ARM: dts: sun7i: Enable USB DRC on the Orange pi
  ARM: dts: sun7i: Enable USB DRC on orangepi-mini
  ARM: dts: axp209: Add usb_power_supply child node to the ax209 node
  ARM: dts: sun8i: Make ippo-q8h-v1.2.dts a symlink to q8-tablet.dts
  ARM: dts: sun8i: Add sun8i-a33-q8-tablet.dts file
  ARM: dts: sun6i: Add support for Yones Toptech bs1078v2 tablets
  ARM: dts: sun4i: Enable USB DRC on the Marsboard A10
  ARM: dts: sun4i: gemei-g9: Add accelerometer (bma250) IRQ
  ARM: dts: sun8i-a33: Add security system crypto engine clock and device nodes
  ARM: dts: sun8i: Add pwm-backlight device for A23/A33 Q8 format tablets
  ARM: sun8i: A23: Add missing msgbox gate
  ...

Pull "Device Tree additions for NXP LPC18xx platform" from Joachim Eastwood:
 - Reset controller (RGU)
 - DMA controller and mux
 - SPI Flash (SPIFI) controller
 - I2C controller
 - Watchdog and SCT PWM from Ariel D'Alessandro

And board updates for EA4357 dev kit and Hitex LPC4350 eval board
adding I2C, SPIFI Flash and some miscellaneous stuff.

* tag 'lpc18xx_dts_for_4.4' of https://github.com/manabian/linux-lpc:
  ARM: dts: lpc4350-hitex-eval: add joystick, buttons and leds
  ARM: dts: lpc4350-hitex-eval: add i2c0 and devices
  ARM: dts: lpc4350-hitex-eval: add spifi and flash device
  ARM: dts: lpc4357-ea4357: add i2c0 and devices
  ARM: dts: lpc4357-ea4357: add ssp0
  ARM: dts: lpc4357-ea4357: add spifi and flash device
  ARM: dts: lpc18xx: add resets entry to device nodes
  ARM: dts: lpc18xx: add sct pwm node
  ARM: dts: lpc18xx: add watchdog node
  ARM: dts: lpc18xx: add i2c nodes
  ARM: dts: lpc18xx: add dma to uart0/1/2/3
  ARM: dts: lpc18xx: add dma to ssp0/1
  ARM: dts: lpc18xx: add dmamux node
  ARM: dts: lpc18xx: add dmac node
  ARM: dts: lpc18xx: add spifi node
  ARM: dts: lpc18xx: add rgu node

Merge tag 'berlin64-dt-for-4.4-1' of git://git.infradead.org/users/hesselba/linux-berlin into next/dt

Merge "Marvell Berlin ARM64 DT for 4.4 take 1" from Sebastian Hesselbarth:
- add BG4CT GPIO nodes
- add BG4CT STB reference board

* tag 'berlin64-dt-for-4.4-1' of git://git.infradead.org/users/hesselba/linux-berlin:
  arm64: dts: add dts file for Marvell Berlin4CT STB board
  arm64: dts: berlin4ct: add GPIO nodes

Merge "Marvell Berlin DT for 4.4 take 1" from Sebastian Hesselbarth:
- use serial aliases and stdout path
- add cpufreq properties to all SoCs
- add pwm nodes for all SoCs

This depends on topic branch berlin-cpuclk-for-4.4-1

* tag 'berlin-dt-for-4.4-1' of git://git.infradead.org/users/hesselba/linux-berlin:
  ARM: berlin: add a PWM node on the BG2CD
  ARM: berlin: add a PWM node on the BG2
  ARM: berlin: add a PWM node on the BG2Q
  ARM: berlin: dts: add the cpufreq-dt bindings on the BG2CD
  ARM: berlin: dts: add the cpufreq-dt bindings on the BG2
  ARM: berlin: dts: add the cpufreq-dt bindings on the BG2Q
  arm: dts: berlin: use stdout-path
  arm: dts: berlin: add aliases for serial

Merge "mvebu dt for 4.4 (part 1)" from Gregory CLEMENT:

Update dts to use the new crypto driver on mvebu SoCs

* tag 'mvebu-dt-4.4-1' of git://git.infradead.org/linux-mvebu:
  ARM: mvebu: modify Orion and Kirkwoord crypto compatible strings
  ARM: mvebu: use new bindings for existing crypto devices
  ARM: mvebu: define crypto SRAM ranges for all armada-38x boards
  ARM: mvebu: add crypto related nodes to armada 38x dtsi
  ARM: mvebu: define crypto SRAM ranges in armada-375-db.dts
  ARM: mvebu: add crypto related nodes to armada 375 dtsi
  ARM: mvebu: define crypto SRAM ranges for all armada-370 boards
  ARM: mvebu: add crypto related nodes to armada 370 dtsi
  ARM: mvebu: define crypto SRAM ranges for all armada-xp boards
  ARM: mvebu: add crypto related nodes to armada-xp.dtsi
  ARM: mvebu: add CPU config registers in the Armada 370/XP Device Tree

Replace "disable" by "disabled" in the Qualcomm MSM8974 dtsi
Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com>
Signed-off-by: Andy Gross <agross@codeaurora.org>

Signed-off-by: Courtney Cavin <courtney.cavin@sonymobile.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Andy Gross <agross@codeaurora.org>

Add the Qualcomm Switch-Mode Battery Charger and Boost device tree
binding.
Signed-off-by: Courtney Cavin <courtney.cavin@sonymobile.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Andy Gross <agross@codeaurora.org>

clock controller nodes which also support power domains (gdscs') need
to have a #power-domain-cells property. Add these for gcc and mmcc
nodes of msm8974, gcc of apq8084 and msm8916.
Also update gcc and mmcc bindings for it.
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Andy Gross <agross@codeaurora.org>

This patch adds SD card detect support.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Andy Gross <agross@codeaurora.org>

This patch adds notify led support on IFC6410, whose trigger can be
configured from userspace.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <agross@codeaurora.org>

Add pwrseq support to sdcc4 which would enable a proper reset of WLAN
without ugly hacks in the board support file.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Andy Gross <agross@codeaurora.org>

This patch adds pwrseq for WLAN which resets the WLAN just before the
SDIO bus is up.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <agross@codeaurora.org>

This patch adds missing 2pin uart pinctrl property to gsbi7 uart on
CM-QS600.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Andy Gross <agross@codeaurora.org>

This patch adds missing 2pin uart pinctrl property to gsbi7 uart on
IFC6410.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <agross@codeaurora.org>

This patch adds missing gsbi7 uart pinctrl, this is the default debug
uart on most boards.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <agross@codeaurora.org>

Usage of generic names like "uart_pins" is confusing to the reader, given
the fact that there could be more than one uart on APQ8064.
This patch adds gsbi prefix to uart pinctrl nodes so as to avoid such
confusion.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <agross@codeaurora.org>

This patch adds support to pm8921 power button.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <agross@codeaurora.org>

This patch adds rtc node for pmic8921.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <agross@codeaurora.org>

This patch removes unnecessary eeprom label, which is not used
anywhere in the board file.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <agross@codeaurora.org>

This patch removes unnecessary eeprom label, which is not used
anywhere in the board file.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <agross@codeaurora.org>

This patch removes i2c pinctrl properties from board which which are now
mentioned in the SOC specific file. This will avoid redundant properties
across multiple board fiiles.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <agross@codeaurora.org>

This doesn't match the binding, and the driver doesn't look to
be using it. Remove the extra element.

CC: Ivan T. Ivanov <ivan.ivanov@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Ivan T. Ivanov <ivan.ivanov@linaro.org>
Signed-off-by: Andy Gross <agross@codeaurora.org>

Enable  internal AHB-PCI bridges for the USB EHCI/OHCI controllers attached
to them and also enable  USB PHY device  for the Porter board.  We have to
enable  everything in one patch since EHCI/OHCI devices are already linked
to the USB PHY device.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Enable the PCIe controller and clock for the Porter board.

This patch is analogous to the commit 485f3ce6 ("ARM: shmobile:
henninger: Enable PCIe Controller & PCIe bus clock") as there are no
differences between the boards in this respect.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Define the Porter board dependent part of the QSPI device node.
Add device nodes  for Spansion  S25FL512S SPI flash and the MTD partitions
on it.

This patch is  mostly analogous  to the commit f59838d4 ("ARM:
shmobile: henninger: add QSPI DT support")  as there are no differences
between the boards in this respect.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Replace console with stdout-path so that we don't have to put the
console on the kernel command line.

Remove earlyprintk to allow the kernel to boot on a system even
if DEBUG_LL is configured for another system.
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>

Merge "Broadcom devicetree changes for v4.4" from Florian Fainelli:

This pull requests contains the following Broadcom SoCs Device Tree changes:

- Brian Norris documents the BCM7445 SoCs Power Management controllers and
  hardware and updates the reference BCM7445 Device Tree with these nodes

- Florian Fainelli documents the BCM7xxx write-pairing feature in the top-level
  BCM7xxx binding document

- Hauke Merthens enables the NAND controller for the Asus RT-AC87U and adds the
  GPIO pin controlling the USB power supply on Netgear R6250

- Jon Mason adds support for the NorthStar Plus SoC by providing a top-level
  binding document and the minimalist device tree skeleton for these SoCs

- Rafal Milecki adds support for the Netgear R7000 (BCM5301x SoC)

- Ray Jui provides a set of Cygnus DT changes that make the Device Tree clearer
  and more correct with respect to how the hardware is designed. He also enables
  the NAND controller on the bcm911360_entphn design, enables a bunch of
  peripherals on the bcm958305k evaluation board, and adds a skeleton .dtsi file
  for the touchscreen extansion board(s)

* tag 'arm-soc/for-4.4/devicetree' of http://github.com/Broadcom/stblinux:
  ARM: dts: move aliases back to .dts in Cygnus
  ARM: dts: fix Cygnus nand device node
  ARM: dts: enable touchscreen support on Cygnus
  ARM: dts: Enable NAND support on bcm911360_entphn
  ARM: dts: Enable various peripherals on bcm958305k
  ARM: dts: Reorder Cygnus peripherals
  ARM: dts: Move all Cygnus peripherals into axi bus
  ARM: dts: Put Cygnus core components under core bus
  ARM: dts: Use label for device nodes in Cygnus dts
  ARM: dts: consolidate aliases for Cygnus dt files
  ARM: BCM5301X: Netgear R6250 add USB GPIO
  Documentation: bindings: brcmstb: Document write-pairing
  ARM: dts: brcmstb: add BCM7445 system PM DT nodes
  Documentation: dt: brcmstb: add system PM bindings
  ARM: BCM5301X: add NAND flash chip description for Asus RT-AC87U
  ARM: BCM5301X: Add DT for Netgear R7000
  ARM: NSP: add minimal Northstar Plus device tree
  dt-bindings: Create Documentation for NSP DT bindings

Merge tag 'v4.4-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt

Merge "Rockchip dts32 changes for 4.4" from Heiko Stuebner:

DTS changes including one new Veyron-board and the Radxa Rock2
system-on-module as well as the square baseboard. On top of that
a lot of mmc-related changes to improve speeds on the Cortex-A9
socs and also setting up the supplies for rk3288 mmc-controllers
for the following mmc-tuning support. And of course the dts-part
of the rk3288 power-domains.

* tag 'v4.4-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  ARM: dts: rockchip: add the support power-domain node on RK3288 SoCs
  ARM: dts: rockchip: add rk3288-firefly iodomains
  ARM: dts: rockchip: fixup firefly mmc supplies
  ARM: dts: rockchip: add rk3288-popmetal iodomains
  ARM: dts: rockchip: add rk3288-popmetal mmc supplies
  ARM: dts: rockchip: add rk3288-popmetal board to dtb list
  ARM: dts: rockchip: Add dtb for the Radxa Rock 2 Square board
  ARM: dts: rockchip: support highspeed sd-cards on rk3066a boards
  ARM: dts: rockchip: support highspeed sd-cards for rk3188-radxarock
  ARM: dts: rockchip: Add the hdmi-ddc pinctrl settings for rk3288
  ARM: dts: rockchip: Remove specific cts pullup from veyron
  ARM: dts: rockchip: pull up cts lines on rk3288
  ARM: dts: rockchip: add veyron-jaq board
  ARM: dts: rockchip: Add support for SD/MMC on MarsBoard-RK3066
  dt-bindings: add power-domain header for RK3288 SoCs

Explicitly use the SoC specific compatible strings in kirkwood.dtsi and
dove.dtsi, so that the crypto devices have access to the TDMA feature
when attached to the new CESA driver.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>

The new bindings split the crypto and sram node in two separate devices.
Modify the existing crypto nodes to match the new representation.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>

Define the crypto SRAM ranges so that the resources referenced by the
sa-sram node can be properly extracted from the DT.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>