Changed CC_GENMASK macro so it can be used for all HW registers.
Signed-off-by: Hadar Gat <hadar.gat@arm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Instead of using CAP_SYS_ADMIN which is restricted to the root user,
check the file mode for write permissions before executing commands that
can affect the platform. This allows for more fine-grained access
control to the SEV ioctl interface. This would allow a SEV-only user
or group the ability to administer the platform without requiring them
to be root or granting them overly powerful permissions.

For example:

chown root:root /dev/sev
chmod 600 /dev/sev
setfacl -m g:sev:r /dev/sev
setfacl -m g:sev-admin:rw /dev/sev

In this instance, members of the "sev-admin" group have the ability to
perform all ioctl calls (including the ones that modify platform state).
Members of the "sev" group only have access to the ioctls that do not
modify the platform state.

This also makes opening "/dev/sev" more consistent with how file
descriptors are usually handled. By only checking for CAP_SYS_ADMIN,
the file descriptor could be opened read-only but could still execute
ioctls that modify the platform state. This patch enforces that the file
descriptor is opened with write privileges if it is going to be used to
modify the platform state.

This flexibility is completely opt-in, and if it is not desirable by
the administrator then they do not need to give anyone else access to
/dev/sev.
Signed-off-by: Connor Kuehl <ckuehl@redhat.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Bandan Das <bsd@redhat.com>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Use a simpler approach for masking / unmasking the rngc interrupt:
The interrupt is unmasked while self-test is running and when the rngc
driver is used by the hwrng core.

Mask the interrupt again when self test is finished, regardless of
self test success or failure.

Unmask the interrupt in the init function. Add a cleanup function where
the rngc interrupt is masked again.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Read the rng type and hardware revision during probe. Fail the probe
operation if the type is not one of rngc or rngb.
(There's also an rnga type, which needs a different driver.)

Display the type and revision in a debug print if probe was successful.
Reviewed-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Remove the device name, it is added by the dev_...() routines.

Drop the error code as well. It will be shown by the driver core when
the probe operation failed.
Reviewed-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The rngc requires a new seed for its prng after generating 2^20 160-bit
words of random data. At the moment, we seed the prng only once during
initalisation.

Set the rngc to auto seed mode so that it kicks off the internal
reseeding operation when a new seed is required.

Keep the manual calculation of the initial seed when the device is
probed and switch to automatic seeding afterwards.
Reviewed-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Make sure that the rngc interrupt is masked if the rngc self test fails.
Self test failure means that probe fails as well. Interrupts should be
masked in this case, regardless of the error.

Cc: stable@vger.kernel.org
Fixes: 1d544944 ("hwrng: mx-rngc - add a driver for Freescale RNGC")
Reviewed-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Move the TI Keystone hardware random number generator into the
same menu as all of the other hardware random number generators.

This makes the driver config be listed in the correct place in
the kconfig tools.

Fixes: eb428ee0 ("hwrng: ks-sa - add hw_random driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Vitaly Andrianov <vitalya@ti.com>
Cc: Tero Kristo <t-kristo@ti.com>
Cc: Murali Karicheri <m-karicheri2@ti.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Matt Mackall <mpm@selenic.com>
Cc: linux-crypto@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

In the scenario of SMMU translation, the SEC performance of short messages
(<512Bytes) cannot meet our expectations. To avoid this, we reserve the
plat buffer (PBUF) memory for small packets when creating TFM.
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Zaibo Xu <xuzaibo@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

We have updated the operation method of IV and MAC address
to prepare for pbuf patch and fixed coding style.
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Zaibo Xu <xuzaibo@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

In order to improve performance of small packets (<512Bytes)
in SMMU translation scenario, we need to identify the type of IOMMU
in the SEC probe to process small packets by a different method.
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Zaibo Xu <xuzaibo@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Allocate one workqueue for each QM instead of one for all QMs,
we found the throughput of SEC engine can be increased to
the hardware limit throughput during testing sec2 performance.
so we added this scheme.
Signed-off-by: Ye Kai <yekai13@huawei.com>
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Zaibo Xu <xuzaibo@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Since SEC need not so many workqueues as our test, we just use
one workqueue created by the device driver of QM if necessary,
which will also reduce CPU waste without any throughput decreasing.
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Signed-off-by: Zaibo Xu <xuzaibo@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Properly document the scatterlist layout for AEAD ciphers.
Reported-by: Gilad Ben-Yossef <gilad@benyossef.com>
Cc: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Do test_aead_vs_generic_impl() before test_aead_inauthentic_inputs() so
that any differences with the generic driver are detected before getting
to the inauthentic input tests, which intentionally use only the driver
being tested (so that they run even if a generic driver is unavailable).
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

rfc4543 was missing from the list of algorithms that may treat the end
of the AAD buffer specially.

Also, with rfc4106, rfc4309, rfc4543, and rfc7539esp, the end of the AAD
buffer is actually supposed to contain a second copy of the IV, and
we've concluded that if the IV copies don't match the behavior is
implementation-defined.  So, the fuzz tests can't easily test that case.

So, make the fuzz tests only use inputs where the two IV copies match.
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Fixes: 40153b10 ("crypto: testmgr - fuzz AEADs against their generic implementation")
Cc: Stephan Mueller <smueller@chronox.de>
Originally-from: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The CONFIG_CRYPTO_DEV_QCE_SOFT_THRESHOLD symbol was renamed during
development, but the stringify reference in the parameter description
sneaked by unnoticed.
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

simplify code to remove unnecessary constant string copies.
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Introduce clear_psp_master_device() to ensure that sp_dev_master gets
properly cleared on the release of a psp device.

Fixes: 2a6170df ("crypto: ccp: Add Platform Security Processor (PSP) device support")
Signed-off-by: John Allen <john.allen@amd.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Explicitly free and clear misc_dev in sev_exit(). Since devm_kzalloc()
associates misc_dev with the first device that gets probed, change from
devm_kzalloc() to kzalloc() and explicitly free memory in sev_exit() as
the first device probed is not guaranteed to be the last device released.
To ensure that the variable gets properly set to NULL, remove the local
definition of misc_dev.

Fixes: 200664d5 ("crypto: ccp: Add Secure Encrypted Virtualization (SEV) command support")
Signed-off-by: John Allen <john.allen@amd.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Building ARMv7 with Clang's integrated assembler leads to errors such
as:
arch/arm/crypto/ghash-ce-core.S:34:11: error: register name expected
 t3l .req d16
          ^

Since no FPU has selected yet Clang considers d16 not a valid register.
Moving the FPU directive on-top allows Clang to parse the registers and
allows to successfully build this file with Clang's integrated assembler.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This updates to the newer register selection proved by HACL*, which
leads to a more compact instruction encoding, and saves around 100
cycles.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Since in the software implementation of XTS-AES there is
no notion of sector every input length is processed the same way.
CAAM implementation has the notion of sector which causes different
results between the software implementation and the one in CAAM
for input lengths bigger than 512 bytes.
Increase sector size to maximum value on 16 bits.

Fixes: c6415a60 ("crypto: caam - add support for acipher xts(aes)")
Cc: <stable@vger.kernel.org> # v4.12+
Signed-off-by: Andrei Botila <andrei.botila@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

HW generates a Data Size error for chacha20 requests that are not
a multiple of 64B, since algorithm state (AS) does not have
the FINAL bit set.

Since updating req->iv (for chaining) is not required,
modify skcipher descriptors to set the FINAL bit for chacha20.

[Note that for skcipher decryption we know that ctx1_iv_off is 0,
which allows for an optimization by not checking algorithm type,
since append_dec_op1() sets FINAL bit for all algorithms except AES.]

Also drop the descriptor operations that save the IV.
However, in order to keep code logic simple, things like
S/G tables generation etc. are not touched.

Cc: <stable@vger.kernel.org> # v5.3+
Fixes: 334d37c9 ("crypto: caam - update IV using HW support")
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Tested-by: Valentin Ciocoi Radulescu <valentin.ciocoi@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: chtls - Fixed boolinit.cocci warning
Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

If UACCE=m and CRYPTO_DEV_HISI_QM=y, the following error
is seen while building qm.o:

drivers/crypto/hisilicon/qm.o: In function `hisi_qm_init':
(.text+0x23c6): undefined reference to `uacce_alloc'
(.text+0x2474): undefined reference to `uacce_remove'
(.text+0x286b): undefined reference to `uacce_remove'
drivers/crypto/hisilicon/qm.o: In function `hisi_qm_uninit':
(.text+0x2918): undefined reference to `uacce_remove'
make[1]: *** [vmlinux] Error 1
make: *** [autoksyms_recursive] Error 2

This patch fixes the config dependency for QM and ZIP.
reported-by: Hulk Robot <hulkci@huawei.com>
Suggested-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Hongbo Yao <yaohongbo@huawei.com>
Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

When uacce parent device module is removed, user app may
still keep the mmaped area, which can be accessed unsafely.
When rmmod, Parent device driver will call uacce_remove,
which unmap all remaining mapping from user space for safety.
VM_FAULT_SIGBUS is also reported to user space accordingly.
Suggested-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Simplify the error handling in the XTS template's ->create() function by
taking advantage of crypto_drop_skcipher() now accepting (as a no-op) a
spawn that hasn't been grabbed yet.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Simplify the error handling in pkcs1pad_create() by taking advantage of
crypto_grab_akcipher() now handling an ERR_PTR() name and by taking
advantage of crypto_drop_akcipher() now accepting (as a no-op) a spawn
that hasn't been grabbed yet.

While we're at it, also simplify the way the hash_name optional argument
is handled.  We only need to check whether it's present in one place,
and we can just assign directly to ctx->digest_info.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Simplify the error handling in pcrypt_create_aead() by taking advantage
of crypto_grab_aead() now handling an ERR_PTR() name and by taking
advantage of crypto_drop_aead() now accepting (as a no-op) a spawn that
hasn't been grabbed yet.

This required also making padata_free_shell() accept a NULL argument.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Simplify the error handling in the LRW template's ->create() function by
taking advantage of crypto_drop_skcipher() now accepting (as a no-op) a
spawn that hasn't been grabbed yet.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Simplify the error handling in aead_geniv_alloc() by taking advantage of
crypto_grab_aead() now handling an ERR_PTR() name and by taking
advantage of crypto_drop_aead() now accepting (as a no-op) a spawn that
hasn't been grabbed yet.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Simplify the error handling in crypto_rfc4543_create() by taking
advantage of crypto_grab_aead() now handling an ERR_PTR() name and by
taking advantage of crypto_drop_aead() now accepting (as a no-op) a
spawn that hasn't been grabbed yet.

Conveniently, this eliminates the 'ccm_name' variable which was
incorrectly named (it should have been 'gcm_name').

Also fix a weird case where a line was terminated by a comma rather than
a semicolon, causing the statement to be continued on the next line.
Fortunately the code still behaved as intended, though.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Simplify the error handling in crypto_rfc4106_create() by taking
advantage of crypto_grab_aead() now handling an ERR_PTR() name and by
taking advantage of crypto_drop_aead() now accepting (as a no-op) a
spawn that hasn't been grabbed yet.

Conveniently, this eliminates the 'ccm_name' variable which was
incorrectly named (it should have been 'gcm_name').
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Simplify the error handling in crypto_cts_create() by taking advantage
of crypto_grab_skcipher() now handling an ERR_PTR() name and by taking
advantage of crypto_drop_skcipher() now accepting (as a no-op) a spawn
that hasn't been grabbed yet.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Simplify the error handling in crypto_rfc3686_create() by taking
advantage of crypto_grab_skcipher() now handling an ERR_PTR() name and
by taking advantage of crypto_drop_skcipher() now accepting (as a no-op)
a spawn that hasn't been grabbed yet.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Simplify the error handling in the various cryptd_create_*() functions
by taking advantage of crypto_grab_*() now handling an ERR_PTR() name
and by taking advantage of crypto_drop_*() now accepting (as a no-op) a
spawn that hasn't been grabbed yet.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Simplify the error handling in crypto_rfc4309_create() by taking
advantage of crypto_grab_aead() now handling an ERR_PTR() name and by
taking advantage of crypto_drop_aead() now accepting (as a no-op) a
spawn that hasn't been grabbed yet.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Fix a weird case where a line was terminated by a comma rather than a
semicolon, causing the statement to be continued on the next line.
Fortunately the code still behaved as intended, though.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add Zhangfei Gao and Zhou Wang as maintainers for uacce
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>