Don't want IRQ on FIFO error because there is nothing useful to do with it.
But do want IRQ on duplex change.
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

This restores the previously removed netif_poll_enable call in e1000_open.
It's needed on all but the first call to e1000_open for a NIC as
e1000_close always calls netif_poll_disable.

netif_poll_enable can only be called safely if no polls have been
scheduled.  This should be the case as long as we don't enter our IRQ
handler.

In order to guarantee this we explicitly disable IRQs as early as possible
when we're probing the NIC.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "Kok, Auke" <auke-jan.h.kok@intel.com>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

 If ioremap_nocache() is unfortunate enough to fail, the error code is not
set correctly leading to a false success from dfx_register().  This change
fixes the problem.
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

Driver was reading value from one register, setting bit and then
writing the wrong register.
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

Driver was not correctly setting up transmit descriptor when doing
VLAN tag insertion with checksum offload.
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

This code inherited from the sk98lin driver is incorrect on the Yukon2.
The GPHY_CTRL register values are specific to the internal PHY of the chip
and the values used were leftovers.
Driver was setting bit 13 which is now the INT polarity for the PHY!
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

Merge branch 'upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream-fixes

Add data from zero-entropy random_writes directly to output pools to
avoid accounting difficulties on machines without entropy sources.

Tested on lguest with all entropy sources disabled.
Signed-off-by: Matt Mackall <mpm@selenic.com>
Acked-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix cast error in entropy extraction.
Add comments explaining the magic 16.
Remove extra confusing loop variable.
Signed-off-by: Matt Mackall <mpm@selenic.com>
Acked-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband:
  IB/mlx4: Fix last allocated object tracking in bitmap allocator
  IB/cm: Fix stale connection detection
  IPoIB/cm: Fix performance regression on Mellanox
  IB/mthca: Fix handling of send CQE with error for QPs connected to SRQ

get_next_timer_interrupt() returns a delta of (LONG_MAX > 1) in case
there is no timer pending. On 64 bit machines this results in a
multiplication overflow in tick_nohz_stop_sched_tick().

Reported by: Dave Miller <davem@davemloft.net>

Make the return value a constant and limit the return value to a 32 bit
value.

When the max timeout value is returned, we can safely stop the tick
timer device. The max jiffies delta results in a 12 days timeout for
HZ=1000.

In the long term the get_next_timer_interrupt() code needs to be
reworked to return ktime instead of jiffies, but we have to wait until
the last users of the original NO_IDLE_HZ code are converted.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Set last allocated object to the object after the one just allocated
before ORing in the extra top bits.  Also handle the case where this
wraps around.
Signed-off-by: Roland Dreier <rolandd@cisco.com>

The ib_cm can incorrectly detect a stale connection (a new connection
request for a QPN that is already connected) as a duplicate connection
request.  Separate the handling of potential duplicate REQs from stale
connections.
Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

commit 518b1646 ("IPoIB/cm: Fix SRQ WR leak") introduced a severe
performance regression on Mellanox cards, because keeping a QP in the
error state for extended periods of time moves hardware to the slow
path (until the QP is destroyed).  For example, MPI latency goes from
~3 usecs to ~7 usecs.

Fix this by posting a send WR on one of the QPs that are being
flushed, instead of using a separate drain QP that is kept in the
error state.

This fixes bug <https://bugs.openfabrics.org/show_bug.cgi?id=636>,
reported and bisected by Scott Weitzenkamp at Cisco and debugged by
Sasha Mikheev at Voltaire.
Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

mthca_free_err_wqe() currently treats both send and receive CQEs
identically if a QP is using an SRQ.  But for Tavor hardware, send
CQEs with error can be chained together even if the RQ is part of SRQ,
so we may miss some CQEs.

Fix by following the WQE chain for all send CQEs even for non-SRQ QPs.

This fixes crashes in IPoIB CM:
<https://bugs.openfabrics.org//show_bug.cgi?id=604>
Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6:
  [SPARC64]: Fill holes in hypervisor APIs and fix KTSB registry.
  [SPARC64]: Fix two bugs wrt. kernel 4MB TSB.
  [SPARC]: Mark as emulating cmpxchg, add appropriate depends for DRM.
  [SPARC]: Emulate cmpxchg like parisc
  [SPARC64]: Fix _PAGE_EXEC_4U check in sun4u I-TLB miss handler.
  [SPARC]: Linux always started with 9600 8N1
  [SPARC64]: arch/sparc64/time.c doesn't compile on Ultra 1 (no PCI)
  [SPARC64]: Eliminate NR_CPUS limitations.
  [SPARC64]: Use machine description and OBP properly for cpu probing.
  [SPARC64]: Negotiate hypervisor API for PCI services.
  [SPARC64]: Report proper system soft state to the hypervisor.
  [SPARC64]: Fix typo in sun4v_hvapi_register error handling.
  [SCSI] ESP: Kill SCSI_ESP_CORE and link directly just like jazz_esp
  [SCSI] jazz_esp: Converted to use esp_core.
  [SPARC64]: PCI device scan is way too verbose by default.
  [SERIAL] sunzilog: section mismatch fix
  [SPARC32]: Removes mismatch section warnigs in sparc time.c file
  [SPARC64]: Don't be picky about virtual-dma values on sun4v.
  [SPARC64]: Kill unused DIE_PAGE_FAULT enum value.
  [SCSI] pluto: Use wait_for_completion_timeout.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
  firewire: fix return code
  firewire: prefix modules with firewire- instead of fw-
  firewire: Add missing byteswapping for receive DMA programs.
  ieee1394: raw1394: Fix async send
  ieee1394: eth1394: bring back a parent device
  ieee1394: eth1394: handle tlabel exhaustion
  ieee1394: eth1394: remove bogus netif_wake_queue
  ieee1394: sbp2: include workqueue.h

* 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6:
  hwmon/applesmc: Handle name file creation error and deletion
  hwmon/applesmc: Simplify dependencies
  hwmon-vid: Don't spam the logs when VRM version is missing
  hwmon/w83627hf: Be quiet when no chip is found
  hwmon/coretemp: Add more safety checks
  hwmon/ds1621: Fix swapped temperature limits

* 'for_paulus' of master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc:
  [POWERPC] Fix Kconfig warning
  [PPC] Fix modpost warning
  [POWERPC] Fix modpost warning
  [POWERPC] Fix Section mismatch warnings
  [POWERPC] QE: fix Kconfig 'select' warning with UCC_FAST
  [POWERPC] 52xx: unbreak lite5200 dts (_pic vs. -pic)
  [PPC] Remove duplicate export of __div64_32.
  [PPC] Fix COMMON symbol warnings

* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6:
  [SCSI] megaraid_sas: intercept cmd timeout and throttle io
  [SCSI] fusion: Fix |/|| confusion
  [SCSI] aic94xx: asd_clear_nexus should fail if the cleared task does not complete
  [SCSI] aic7xxx: fix aicasm build failure with gcc-3.4.6
  [SCSI] aacraid: apply commit config for reset_devices flag
  [SCSI] sd: fix refcounting regression in suspend/resume routines
  [SCSI] aacraid: fix panic on short Inquiry
  [SCSI] aacraid: Correct sa platform support. (Was: [Bug 8469] Bad EIP value on pentium3 SMP kernel-2.6.21.1)
  [SCSI] NCR53C9x: correct spelling mistake in deprecation notice
  [SCSI] tgt: fix a rdma indirect transfer error bug
  [SCSI] MegaRAID: Update MAINTAINERS email-id
  [SCSI] stex: minor cleanup and version update
  [SCSI] stex: fix reset recovery for console device
  [SCSI] stex: extend hard reset wait time
  [SCSI] stex: fix id mapping issue
  [SCSI] ipr: Proper return codes for eh_dev_reset for SATA devices
  [SCSI] zfcp: IO stall after deleting and path checker changes after reenabling zfcp devices
  [SCSI] zfcp: avoid clutter in erp_dbf

This patch (as912) replaces a couple of calls to flush_workqueue()
with cancel_sync_work() and cancel_rearming_delayed_work().  Using a
more directed approach allows us to avoid some nasty deadlocks.  The
prime example occurs when a first-level device (the parent is a root
hub) is removed while at the same time the root hub gets a remote
wakeup request.  khubd would try to flush the autosuspend workqueue
while holding the root-hub's lock, and the remote-wakeup workqueue
routine would be waiting to lock the root hub.

The patch also reorganizes the power management portion of
usb_disconnect(), separating it out into its own routine.  The
autosuspend workqueue entry is cancelled immediately instead of
waiting for the device's release routine.  In addition,
synchronization with the autosuspend thread is carried out even for
root hubs (an oversight in the original code).
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Greg KH <gregkh@suse.de>
Cc: Mark Lord <lkml@rtr.ca>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When hostap_tx_encrypt() tries to allocate enough headroom and
tailroom for ieee80211 encryption, it only makes enough room for the
"mpdu" phase of the operation, but forgets about the "msdu" phase.
(For TKIP, these two phases require, respectively, 4 and 8 bytes of
tailroom, per the "ieee80211_crypt_tkip" structure at the bottom of
net/ieee80211/ieee80211_crypt_tkip.c.)
Signed-off-by: Brandon Craig Rhodes <brandon@rhodesmill.org>
Signed-off-by: Jouni Malinen <j@w1.fi>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

This patch adds missing NULL check and trims a line longer than 80 columns.

Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Joe Jezak <josejx@gentoo.org>
Cc: Daniel Drake <dsd@gentoo.org>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

Fix error message:
Unable to network device. --> Unable to allocate network device.

Cc: James Ketrenos <jketreno@linux.intel.com>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

Manually set the device of a skb for prism54 cards that are in monitor
mode as we never call eth_type_trans in that case.
Signed-off-by: Björn Steinbrink <B.Steinbrink@gmx.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

Several interfaces were missing and others misnumbered or
improperly documented.

Also, make sure to check the return value when registering
the kernel TSBs with the hypervisor.  This helped to find
the 4MB kernel TSB alignment bug fixed in a previous changeset.
Signed-off-by: David S. Miller <davem@davemloft.net>

1) The TSB lookup was not using the correct hash mask.

2) It was not aligned on a boundary equal to it's size,
   which is required by the sun4v Hypervisor.

wasn't having it's return value checked, and that bug will be fixed up
as well in a subsequent changeset.
Signed-off-by: David S. Miller <davem@davemloft.net>

The DRM code depends on an atomic version of cmpxchg(), which is not
available on sparc32. Since other platforms besides sparc32 have this
issue a KCONFIG option is added for it.
Signed-off-by: Martin Habets <errandir_news@mph.eclipse.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

It was using an immediate _PAGE_EXEC_4U value in an 'and'
instruction to perform the test.  This doesn't work because
the immediate field is signed 13-bit, this the mask being
tested against the PTE was 0x1000 sign-extended to 32-bits
instead of just plain 0x1000.
Signed-off-by: David S. Miller <davem@davemloft.net>

The Linux kernel ignored the PROM's serial settings (115200,n,8,1 in
my case). This was because mode_prop remained "ttyX-mode" (expected:
"ttya-mode") due to the constness of string literals when used with
"char *". Since there is no "ttyX-mode" property in the PROM, Linux
always used the default 9600.

[ Investigation of the suncore.s assembler reveals that gcc optimizied
  away the stores, yet did not emit a warning, which is a pretty
  anti-social thing to do and is the only reason this bug lived for
  so long -DaveM ]
Signed-off-by: Jan Engelhardt <jengelh@gmx.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

This is bug 8540 on bugzilla.kernel.org

arch/sparc64/time.c contains references to assorted bq4802 stuff if
CONFIG_PCI is not set, and compile fails. I #ifdef'ed out everything
that looks PCI-ish in that file.
Signed-off-by: David S. Miller <davem@davemloft.net>

Cheetah systems can have cpuids as large as 1023, although physical
systems don't have that many cpus.

Only three limitations existed in the kernel preventing arbitrary
NR_CPUS values:

1) dcache dirty cpu state stored in page->flags on
   D-cache aliasing platforms.  With some build time
   calculations and some build-time BUG checks on
   page->flags layout, this one was easily solved.

2) The cheetah XCALL delivery code could only handle
   a cpumask with up to 32 cpus set.  Some simple looping
   logic clears that up too.

3) thread_info->cpu was a u8, easily changed to a u16.

There are a few spots in the kernel that still put NR_CPUS
sized arrays on the kernel stack, but that's not a sparc64
specific problem.
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: David S. Miller <davem@davemloft.net>

Use new esp_scsi for JAZZ SCSI host adapter driver
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

These messages were very useful when bringing up the
OBP based PCI device scan code, but it's just a lot
of noise every bootup now especially on big machines.

The messages can be re-enabled via 'ofpci_debug=1' on
the kernel command line.
Signed-off-by: David S. Miller <davem@davemloft.net>