- 28 Dec, 2018 40 commits
-
-
Junxiao Bi authored
Dirty flag of the journal should be cleared at the last stage of umount, if do it before jbd2_journal_destroy(), then some metadata in uncommitted transaction could be lost due to io error, but as dirty flag of journal was already cleared, we can't find that until run a full fsck. This may cause system panic or other corruption. Link: http://lkml.kernel.org/r/20181121020023.3034-3-junxiao.bi@oracle.comSigned-off-by:
Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by:
Yiwen Jiang <jiangyiwen@huawei.com> Reviewed-by:
Joseph Qi <jiangqi903@gmail.com> Cc: Jun Piao <piaojun@huawei.com> Cc: Changwei Ge <ge.changwei@h3c.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@versity.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Junxiao Bi authored
mount.ocfs2 ignore the inconsistent error that journal is clean but local alloc is unrecovered. After mount, local alloc not empty, then reserver cluster didn't alloc a new local alloc window, reserveration map is empty(ocfs2_reservation_map.m_bitmap_len = 0), that triggered the following panic. This issue was reported at https://oss.oracle.com/pipermail/ocfs2-devel/2015-May/010854.html and was advised to fixed during mount. But this is a very unusual inconsistent state, usually journal dirty flag should be cleared at the last stage of umount until every other things go right. We may need do further debug to check that. Any way to avoid possible futher corruption, mount should be abort and fsck should be run. (mount.ocfs2,1765,1):ocfs2_load_local_alloc:353 ERROR: Local alloc hasn't been recovered! found = 6518, set = 6518, taken = 8192, off = 15912372 ocfs2: Mounting device (202,64) on (node 0, slot 3) with ordered data mode. o2dlm: Joining domain 89CEAC63CC4F4D03AC185B44E0EE0F3F ( 0 1 2 3 4 5 6 8 ) 8 nodes ocfs2: Mounting device (202,80) on (node 0, slot 3) with ordered data mode. o2hb: Region 89CEAC63CC4F4D03AC185B44E0EE0F3F (xvdf) is now a quorum device o2net: Accepted connection from node yvwsoa17p (num 7) at 172.22.77.88:7777 o2dlm: Node 7 joins domain 64FE421C8C984E6D96ED12C55FEE2435 ( 0 1 2 3 4 5 6 7 8 ) 9 nodes o2dlm: Node 7 joins domain 89CEAC63CC4F4D03AC185B44E0EE0F3F ( 0 1 2 3 4 5 6 7 8 ) 9 nodes ------------[ cut here ]------------ kernel BUG at fs/ocfs2/reservations.c:507! invalid opcode: 0000 [#1] SMP Modules linked in: ocfs2 rpcsec_gss_krb5 auth_rpcgss nfsv4 nfs fscache lockd grace ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm ocfs2_nodemanager ocfs2_stackglue configfs sunrpc ipt_REJECT nf_reject_ipv4 nf_conntrack_ipv4 nf_defrag_ipv4 iptable_filter ip_tables ip6t_REJECT nf_reject_ipv6 nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables ib_ipoib rdma_ucm ib_ucm ib_uverbs ib_umad rdma_cm ib_cm iw_cm ib_sa ib_mad ib_core ib_addr ipv6 ovmapi ppdev parport_pc parport xen_netfront fb_sys_fops sysimgblt sysfillrect syscopyarea acpi_cpufreq pcspkr i2c_piix4 i2c_core sg ext4 jbd2 mbcache2 sr_mod cdrom xen_blkfront pata_acpi ata_generic ata_piix floppy dm_mirror dm_region_hash dm_log dm_mod CPU: 0 PID: 4349 Comm: startWebLogic.s Not tainted 4.1.12-124.19.2.el6uek.x86_64 #2 Hardware name: Xen HVM domU, BIOS 4.4.4OVM 09/06/2018 task: ffff8803fb04e200 ti: ffff8800ea4d8000 task.ti: ffff8800ea4d8000 RIP: 0010:[<ffffffffa05e96a8>] [<ffffffffa05e96a8>] __ocfs2_resv_find_window+0x498/0x760 [ocfs2] Call Trace: ocfs2_resmap_resv_bits+0x10d/0x400 [ocfs2] ocfs2_claim_local_alloc_bits+0xd0/0x640 [ocfs2] __ocfs2_claim_clusters+0x178/0x360 [ocfs2] ocfs2_claim_clusters+0x1f/0x30 [ocfs2] ocfs2_convert_inline_data_to_extents+0x634/0xa60 [ocfs2] ocfs2_write_begin_nolock+0x1c6/0x1da0 [ocfs2] ocfs2_write_begin+0x13e/0x230 [ocfs2] generic_perform_write+0xbf/0x1c0 __generic_file_write_iter+0x19c/0x1d0 ocfs2_file_write_iter+0x589/0x1360 [ocfs2] __vfs_write+0xb8/0x110 vfs_write+0xa9/0x1b0 SyS_write+0x46/0xb0 system_call_fastpath+0x18/0xd7 Code: ff ff 8b 75 b8 39 75 b0 8b 45 c8 89 45 98 0f 84 e5 fe ff ff 45 8b 74 24 18 41 8b 54 24 1c e9 56 fc ff ff 85 c0 0f 85 48 ff ff ff <0f> 0b 48 8b 05 cf c3 de ff 48 ba 00 00 00 00 00 00 00 10 48 85 RIP __ocfs2_resv_find_window+0x498/0x760 [ocfs2] RSP <ffff8800ea4db668> ---[ end trace 566f07529f2edf3c ]--- Kernel panic - not syncing: Fatal exception Kernel Offset: disabled Link: http://lkml.kernel.org/r/20181121020023.3034-2-junxiao.bi@oracle.comSigned-off-by:
-
Larry Chen authored
Included file path was hard-wired in the ocfs2 makefile, which might causes some confusion when compiling ocfs2 as an external module. Say if we compile ocfs2 module as following. cp -r /kernel/tree/fs/ocfs2 /other/dir/ocfs2 cd /other/dir/ocfs2 make -C /path/to/kernel_source M=`pwd` modules Acutally, the compiler wil try to find included file in /kernel/tree/fs/ocfs2, rather than the directory /other/dir/ocfs2. To fix this little bug, we introduce the var $(src) provided by kbuild. $(src) means the absolute path of the running kbuild file. Link: http://lkml.kernel.org/r/20181108085546.15149-1-lchen@suse.comSigned-off-by:
Larry Chen <lchen@suse.com> Reviewed-by:
-
zhong jiang authored
lastzero is not used after setting its value. It is safe to remove the unused variable. Link: http://lkml.kernel.org/r/1540296942-24533-1-git-send-email-zhongjiang@huawei.comSigned-off-by:
zhong jiang <zhongjiang@huawei.com> Reviewed-by:
-
zhong jiang authored
status is not used after setting its value. It is safe to remove the unused variable. Link: http://lkml.kernel.org/r/1540300179-26697-1-git-send-email-zhongjiang@huawei.comSigned-off-by:
Jun Piao <piaojun@huawei.com> Acked-by:
-
Jia Guo authored
Reading heartbeat data from lowest node rather than from zero, in cases where the node is not defined from zero, can reduce the number of sectors read. Here is a simple test data obtained with 'iostat -dmx dm-5 2', with two nodes in the cluster, node number 10, 20, respectively. Before optimization: Device: rrqm/s wrqm/s r/s w/s rMB/s wMB/s avgrq-sz avgqu-sz await r_await w_await svctm %util dm-5 0.00 0.00 0.50 0.50 0.01 0.00 11.00 0.00 1.00 1.00 1.00 1.50 0.15 After the optimization: Device: rrqm/s wrqm/s r/s w/s rMB/s wMB/s avgrq-sz avgqu-sz await r_await w_await svctm %util dm-5 0.00 0.00 0.50 0.50 0.00 0.00 6.00 0.00 0.50 1.00 0.00 0.50 0.05 Link: http://lkml.kernel.org/r/99fe4988-69ac-3615-a218-3042fe6fbe72@huawei.comSigned-off-by:
Jia Guo <guojia12@huawei.com> Reviewed-by:
-
Qian Cai authored
The current value of the early boot static pool size, 1024 is not big enough for systems with large number of CPUs with timer or/and workqueue objects selected. As the results, systems have 60+ CPUs with both timer and workqueue objects enabled could trigger "ODEBUG: Out of memory. ODEBUG disabled". Some debug objects are allocated during the early boot. Enabling some options like timers or workqueue objects may increase the size required significantly with large number of CPUs. For example, CONFIG_DEBUG_OBJECTS_TIMERS: No. CPUs x 2 (worker pool) objects: start_kernel workqueue_init_early init_worker_pool init_timer_key debug_object_init plus No. CPUs objects (CONFIG_HIGH_RES_TIMERS): sched_init hrtick_rq_init hrtimer_init CONFIG_DEBUG_OBJECTS_WORK: No. CPUs objects: vmalloc_init __init_work plus No. CPUs x 6 (workqueue) objects: workqueue_init_early alloc_workqueue __alloc_workqueue_key alloc_and_link_pwqs init_pwq Also, plus No. CPUs objects: perf_event_init __init_srcu_struct init_srcu_struct_fields init_srcu_struct_nodes __init_work However, none of the things are actually used or required before debug_objects_mem_init() is invoked, so just move the call right before vmalloc_init(). According to tglx, "the reason why the call is at this place in start_kernel() is historical. It's because back in the days when debugobjects were added the memory allocator was enabled way later than today." Link: http://lkml.kernel.org/r/20181126102407.1836-1-cai@gmx.usSigned-off-by:Qian Cai <cai@gmx.us> Suggested-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Waiman Long <longman@redhat.com> Cc: Yang Shi <yang.shi@linux.alibaba.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Kuninori Morimoto authored
Update license to use SPDX-License-Identifier instead of verbose license text. Link: http://lkml.kernel.org/r/871s6wcswb.wl-kuninori.morimoto.gx@renesas.comSigned-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by:
Simon Horman <horms+renesas@verge.net.au> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Rich Felker <dalias@libc.org> Signed-off-by:
-
Kuninori Morimoto authored
Update license to use SPDX-License-Identifier instead of verbose license text. Link: http://lkml.kernel.org/r/8736rccswn.wl-kuninori.morimoto.gx@renesas.comSigned-off-by:
-
Kuninori Morimoto authored
Update license to use SPDX-License-Identifier instead of verbose license text. Link: http://lkml.kernel.org/r/874lbscswy.wl-kuninori.morimoto.gx@renesas.comSigned-off-by:
-
Kuninori Morimoto authored
Update license to use SPDX-License-Identifier instead of verbose license text. Link: http://lkml.kernel.org/r/875zw8csxa.wl-kuninori.morimoto.gx@renesas.comSigned-off-by:
-
Kuninori Morimoto authored
Update license to use SPDX-License-Identifier instead of verbose license text. Link: http://lkml.kernel.org/r/877egocsxl.wl-kuninori.morimoto.gx@renesas.comSigned-off-by:
-
Kuninori Morimoto authored
Update license to use SPDX-License-Identifier instead of verbose license text. Link: http://lkml.kernel.org/r/878t14csxy.wl-kuninori.morimoto.gx@renesas.comSigned-off-by:
-
Kuninori Morimoto authored
Update license to use SPDX-License-Identifier instead of verbose license text, excepting ${LINUX}/arch/sh/kernel/cpu/sh4/softfloat.c which is not GPL license Link: http://lkml.kernel.org/r/87a7lkcsya.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: -
Kuninori Morimoto authored
Update license to use SPDX-License-Identifier instead of verbose license text. Link: http://lkml.kernel.org/r/87bm60csyl.wl-kuninori.morimoto.gx@renesas.comSigned-off-by:
-
Kuninori Morimoto authored
Update license to use SPDX-License-Identifier instead of verbose license text. Link: http://lkml.kernel.org/r/87d0qgcsz8.wl-kuninori.morimoto.gx@renesas.comSigned-off-by:
-
Kuninori Morimoto authored
Update license to use SPDX-License-Identifier instead of verbose license text. Link: http://lkml.kernel.org/r/87efawcszk.wl-kuninori.morimoto.gx@renesas.comSigned-off-by:
-
Kuninori Morimoto authored
Update license to use SPDX-License-Identifier instead of verbose license text. Link: http://lkml.kernel.org/r/87ftvccszx.wl-kuninori.morimoto.gx@renesas.comSigned-off-by:
-
Kuninori Morimoto authored
Update license to use SPDX-License-Identifier instead of verbose license text. As original license mentioned, it is GPL-2.0 in SPDX. Then, MODULE_LICENSE() should be "GPL v2" instead of "GPL". See ${LINUX}/include/linux/module.h "GPL" [GNU Public License v2 or later] "GPL v2" [GNU Public License v2] Link: http://lkml.kernel.org/r/87h8fsct0a.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: -
Kuninori Morimoto authored
Update license to use SPDX-License-Identifier instead of verbose license text. Link: http://lkml.kernel.org/r/87in08ct0n.wl-kuninori.morimoto.gx@renesas.comSigned-off-by:
-
YueHaibing authored
There is no need to have the 'struct clk *camera_clk' variable static since a new value is always assigned before use. Link: http://lkml.kernel.org/r/1543628631-99957-1-git-send-email-yuehaibing@huawei.comSigned-off-by:
YueHaibing <yuehaibing@huawei.com> Reviewed-by:
-
Randy Dunlap authored
arch/sh/boards/mach-kfr2r09/setup.c does not need to #include <mtd/onenand.h>, and doing so causes a build warning, so drop that header file. In file included from ../arch/sh/boards/mach-kfr2r09/setup.c:28: ../include/linux/mtd/onenand.h:225:12: warning: 'struct mtd_oob_ops' declared inside parameter list will not be visible outside of this definition or declaration struct mtd_oob_ops *ops); Link: http://lkml.kernel.org/r/702f0a25-c63e-6912-4640-6ab0f00afbc7@infradead.org Fixes: f3590dc3 ("media: arch: sh: kfr2r09: Use new renesas-ceu camera driver") Signed-off-by:Randy Dunlap <rdunlap@infradead.org> Reported-by:
Geert Uytterhoeven <geert@linux-m68k.org> Suggested-by:
Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by:
-
Kirill Tkhai authored
New declarations and identifier (__always_inline). Link: http://lkml.kernel.org/r/154505048571.504.18330420599768007443.stgit@localhost.localdomainSigned-off-by:
Kirill Tkhai <ktkhai@virtuozzo.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Constantine Shulyupin <const@MakeLinux.com> Cc: Kirill Tkhai <ktkhai@virtuozzo.com> Cc: Joey Pabalinas <joeypabalinas@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by:
-
Thierry Reding authored
Add a script that will run spdxcheck.py through a couple of self tests to simplify validation in the future. The tests are run for both Python 2 and Python 3 to make sure all changes to the script remain compatible across both versions. The script tests a regular text file (Makefile) for basic sanity checks and then runs it on a binary file (Documentation/logo.gif) to make sure it works in both cases. It also tests opening files passed on the command line as well as piped files read from standard input. Finally a run on the complete tree will be performed to catch any other potential issues. Link: http://lkml.kernel.org/r/20181212131210.28024-2-thierry.reding@gmail.comSigned-off-by:
Thierry Reding <treding@nvidia.com> Thomas Gleixner <tglx@linutronix.de> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Joe Perches <joe@perches.com> Cc: Jeremy Cline <jcline@redhat.com> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
-
Qian Cai authored
This is to track dynamic amount of stack growth for aarch64, so it is possible to print out offensive functions that may consume too much stack. For example, 0xffff2000084d1270 try_to_unmap_one [vmlinux]: Dynamic (0xcf0) 0xffff200008538358 migrate_page_move_mapping [vmlinux]: Dynamic (0xc60) 0xffff2000081276c8 copy_process.isra.2 [vmlinux]: Dynamic (0xb20) 0xffff200008424958 show_free_areas [vmlinux]: Dynamic (0xb40) 0xffff200008545178 __split_huge_pmd_locked [vmlinux]: Dynamic (0xb30) 0xffff200008555120 collapse_shmem [vmlinux]: Dynamic (0xbc0) 0xffff20000862e0d0 do_direct_IO [vmlinux]: Dynamic (0xb70) 0xffff200008cc0aa0 md_do_sync [vmlinux]: Dynamic (0xb90) Link: http://lkml.kernel.org/r/20181208025143.39363-1-cai@lca.pwSigned-off-by:
Qian Cai <cai@lca.pw> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Marc Zyngier authored
Running something like: decodecode vmlinux . leads to interested results where not only the leading "." gets stripped from the displayed paths, but also anywhere in the string, displaying something like: kvm_vcpu_check_block (arch/arm64/kvm/virt/kvm/kvm_mainc:2141) which doesn't help further processing. Fix it by only stripping the base path if it is a prefix of the path. Link: http://lkml.kernel.org/r/20181210174659.31054-3-marc.zyngier@arm.comSigned-off-by:
Marc Zyngier <marc.zyngier@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Marc Zyngier authored
When running decodecode natively on arm64, ARCH is likely not to be set, and we end-up with .4byte instead of .inst when generating the disassembly. Similar effects would occur if running natively on a 32bit ARM platform, although that's even less popular. A simple workaround is to populate ARCH when it is not set and that we're running on an arm/arm64 system. Link: http://lkml.kernel.org/r/20181210174659.31054-2-marc.zyngier@arm.comSigned-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Rasmus Villemoes authored
Since __LINE__ is part of the symbol created by __ADDRESSABLE, almost any change causes those symbols to disappear and get reincarnated, e.g. add/remove: 4/4 grow/shrink: 0/3 up/down: 32/-171 (-139) Function old new delta __addressable_tracing_set_default_clock8649 - 8 +8 __addressable_tracer_init_tracefs8631 - 8 +8 __addressable_ftrace_dump8383 - 8 +8 __addressable_clear_boot_tracer8632 - 8 +8 __addressable_tracing_set_default_clock8650 8 - -8 __addressable_tracer_init_tracefs8632 8 - -8 __addressable_ftrace_dump8384 8 - -8 __addressable_clear_boot_tracer8633 8 - -8 trace_default_header 663 642 -21 tracing_mark_raw_write 406 355 -51 tracing_mark_write 624 557 -67 Total: Before=63889, After=63750, chg -0.22% They're small and in .discard, so ignore them, leading to more useful add/remove: 0/0 grow/shrink: 0/3 up/down: 0/-139 (-139) Function old new delta trace_default_header 663 642 -21 tracing_mark_raw_write 406 355 -51 tracing_mark_write 624 557 -67 Total: Before=63721, After=63582, chg -0.22% Link: http://lkml.kernel.org/r/20181102210030.8383-1-linux@rasmusvillemoes.dkSigned-off-by:
Rasmus Villemoes <linux@rasmusvillemoes.dk> Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Maninder Singh <maninder1.s@samsung.com> Cc: Matteo Croce <mcroce@redhat.com> Signed-off-by:
-
Andrey Konovalov authored
This patch adds a "SPDX-License-Identifier: GPL-2.0" mark to all source files under mm/kasan. Link: http://lkml.kernel.org/r/bce2d1e618afa5142e81961ab8fa4b4165337380.1544099024.git.andreyknvl@google.comSigned-off-by:
Andrey Konovalov <andreyknvl@google.com> Reviewed-by:
Andrey Ryabinin <aryabinin@virtuozzo.com> Reviewed-by:
Dmitry Vyukov <dvyukov@google.com> Cc: Christoph Lameter <cl@linux.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Andrey Konovalov authored
This patch updates KASAN documentation to reflect the addition of the new tag-based mode. Link: http://lkml.kernel.org/r/aabef9de317c54b8a3919a4946ce534c6576726a.1544099024.git.andreyknvl@google.comSigned-off-by:
-
Andrey Konovalov authored
Now, that all the necessary infrastructure code has been introduced, select HAVE_ARCH_KASAN_SW_TAGS for arm64 to enable software tag-based KASAN mode. Link: http://lkml.kernel.org/r/25abce9a21d0c1df2d9d72488aced418c3465d7b.1544099024.git.andreyknvl@google.comSigned-off-by:
-
Andrey Konovalov authored
This patch adds __must_check annotations to kasan hooks that return a pointer to make sure that a tagged pointer always gets propagated. Link: http://lkml.kernel.org/r/03b269c5e453945f724bfca3159d4e1333a8fb1c.1544099024.git.andreyknvl@google.comSigned-off-by:
-
Andrey Konovalov authored
Tag-based KASAN doesn't check memory accesses through pointers tagged with 0xff. When page_address is used to get pointer to memory that corresponds to some page, the tag of the resulting pointer gets set to 0xff, even though the allocated memory might have been tagged differently. For slab pages it's impossible to recover the correct tag to return from page_address, since the page might contain multiple slab objects tagged with different values, and we can't know in advance which one of them is going to get accessed. For non slab pages however, we can recover the tag in page_address, since the whole page was marked with the same tag. This patch adds tagging to non slab memory allocated with pagealloc. To set the tag of the pointer returned from page_address, the tag gets stored to page->flags when the memory gets allocated. Link: http://lkml.kernel.org/r/d758ddcef46a5abc9970182b9137e2fbee202a2c.1544099024.git.andreyknvl@google.comSigned-off-by:
-
Andrey Konovalov authored
Tag-based KASAN inline instrumentation mode (which embeds checks of shadow memory into the generated code, instead of inserting a callback) generates a brk instruction when a tag mismatch is detected. This commit adds a tag-based KASAN specific brk handler, that decodes the immediate value passed to the brk instructions (to extract information about the memory access that triggered the mismatch), reads the register values (x0 contains the guilty address) and reports the bug. Link: http://lkml.kernel.org/r/c91fe7684070e34dc34b419e6b69498f4dcacc2d.1544099024.git.andreyknvl@google.comSigned-off-by:
-
Andrey Konovalov authored
This commit adds tag-based KASAN specific hooks implementation and adjusts common generic and tag-based KASAN ones. 1. When a new slab cache is created, tag-based KASAN rounds up the size of the objects in this cache to KASAN_SHADOW_SCALE_SIZE (== 16). 2. On each kmalloc tag-based KASAN generates a random tag, sets the shadow memory, that corresponds to this object to this tag, and embeds this tag value into the top byte of the returned pointer. 3. On each kfree tag-based KASAN poisons the shadow memory with a random tag to allow detection of use-after-free bugs. The rest of the logic of the hook implementation is very much similar to the one provided by generic KASAN. Tag-based KASAN saves allocation and free stack metadata to the slab object the same way generic KASAN does. Link: http://lkml.kernel.org/r/bda78069e3b8422039794050ddcb2d53d053ed41.1544099024.git.andreyknvl@google.comSigned-off-by:
-
Andrey Konovalov authored
While with SLUB we can actually preassign tags for caches with contructors and store them in pointers in the freelist, SLAB doesn't allow that since the freelist is stored as an array of indexes, so there are no pointers to store the tags. Instead we compute the tag twice, once when a slab is created before calling the constructor and then again each time when an object is allocated with kmalloc. Tag is computed simply by taking the lowest byte of the index that corresponds to the object. However in kasan_kmalloc we only have access to the objects pointer, so we need a way to find out which index this object corresponds to. This patch moves obj_to_index from slab.c to include/linux/slab_def.h to be reused by KASAN. Link: http://lkml.kernel.org/r/c02cd9e574cfd93858e43ac94b05e38f891fef64.1544099024.git.andreyknvl@google.comSigned-off-by:
Christoph Lameter <cl@linux.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Andrey Konovalov authored
This commit adds rountines, that print tag-based KASAN error reports. Those are quite similar to generic KASAN, the difference is: 1. The way tag-based KASAN finds the first bad shadow cell (with a mismatching tag). Tag-based KASAN compares memory tags from the shadow memory to the pointer tag. 2. Tag-based KASAN reports all bugs with the "KASAN: invalid-access" header. Also simplify generic KASAN find_first_bad_addr. Link: http://lkml.kernel.org/r/aee6897b1bd077732a315fd84c6b4f234dbfdfcb.1544099024.git.andreyknvl@google.comSigned-off-by:
-
Andrey Konovalov authored
Move generic KASAN specific error reporting routines to generic_report.c without any functional changes, leaving common error reporting code in report.c to be later reused by tag-based KASAN. Link: http://lkml.kernel.org/r/ba48c32f8e5aefedee78998ccff0413bee9e0f5b.1544099024.git.andreyknvl@google.comSigned-off-by:
-
Andrey Konovalov authored
The krealloc function checks where the same buffer was reused or a new one allocated by comparing kernel pointers. Tag-based KASAN changes memory tag on the krealloc'ed chunk of memory and therefore also changes the pointer tag of the returned pointer. Therefore we need to perform comparison on untagged (with tags reset) pointers to check whether it's the same memory region or not. Link: http://lkml.kernel.org/r/14f6190d7846186a3506cd66d82446646fe65090.1544099024.git.andreyknvl@google.comSigned-off-by:
-
Andrey Konovalov authored
Tag-based KASAN uses the Top Byte Ignore feature of arm64 CPUs to store a pointer tag in the top byte of each pointer. This commit enables the TCR_TBI1 bit, which enables Top Byte Ignore for the kernel, when tag-based KASAN is used. Link: http://lkml.kernel.org/r/f51eca084c8cdb2f3a55195fe342dc8953b7aead.1544099024.git.andreyknvl@google.comSigned-off-by:
-
