The kAPI, v4l-drivers and dvb-drivers never used the
GNU FDL license. The addition of such license header were
just due to copy-and-paste. So, let's fix it.

As the media_kapi were part of device-drivers.tmp, it is
under GPL v2+.

The other two books is an agregation of files without any
license explicitly specified. So, they're all bound to the
Kernel's COPYING license. So, they're GPL v2 only.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

The Sphinx note markup for media_remove_intf_links() is wrong:
there's a missing space.

While here, let's auto-numerate the two notes.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

The uAPI book has 5 parts, but they lost numeration after
conversion to rst. Manually number those parts, and make
the main index with 1 depth, to only show the parts and
the annexes.

At each part, use :maxwidth: 5, in order to show a more
complete index.

While here, fix the cross-references between different
books.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Fix all remaining media warnings with ReST that are fixable
without changing at the Sphinx code.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

* patchwork: (1492 commits)
  [media] cec: always check all_device_types and features
  [media] cec: poll should check if there is room in the tx queue
  [media] vivid: support monitor all mode
  [media] cec: fix test for unconfigured adapter in main message loop
  [media] cec: limit the size of the transmit queue
  [media] cec: zero unused msg part after msg->len
  [media] cec: don't set fh to NULL in CEC_TRANSMIT
  [media] cec: clear all status fields before transmit and always fill in sequence
  [media] cec: CEC_RECEIVE overwrote the timeout field
  [media] cxd2841er: Reading SNR for DVB-C added
  [media] cxd2841er: Reading BER and UCB for DVB-C added
  [media] cxd2841er: fix switch-case for DVB-C
  [media] cxd2841er: fix signal strength scale for ISDB-T
  [media] cxd2841er: adjust the dB scale for DVB-C
  [media] cxd2841er: provide signal strength for DVB-C
  [media] cxd2841er: fix BER report via DVBv5 stats API
  [media] mb86a20s: apply mask to val after checking for read failure
  [media] airspy: fix error logic during device register
  [media] s5p-cec/TODO: add TODO item
  [media] cec/TODO: drop comment about sphinx documentation
  ...
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

* 'docs-next' of git://git.lwn.net/linux:
  doc-rst: kernel-doc: fix handling of address_space tags
  Revert "doc/sphinx: Enable keep_warnings"
  doc-rst: kernel-doc directive, fix state machine reporter
  docs: deprecate kernel-doc-nano-HOWTO.txt
  doc/sphinx: Enable keep_warnings
  Documentation: add watermark_scale_factor to the list of vm systcl file
  kernel-doc: Fix up warning output
  docs: Get rid of some kernel-documentation warnings

The RST cpp:function handler is very pedantic: it doesn't allow any
macros like __user on it:

	Documentation/media/kapi/dtv-core.rst:28: WARNING: Error when parsing function declaration.
	If the function has no return type:
	  Error in declarator or parameters and qualifiers
	  Invalid definition: Expecting "(" in parameters_and_qualifiers. [error at 8]
	    ssize_t dvb_ringbuffer_pkt_read_user (struct dvb_ringbuffer * rbuf, size_t idx, int offset, u8 __user * buf, size_t len)
	    --------^
	If the function has a return type:
	  Error in declarator or parameters and qualifiers
	  If pointer to member declarator:
	    Invalid definition: Expected '::' in pointer to member (function). [error at 37]
	      ssize_t dvb_ringbuffer_pkt_read_user (struct dvb_ringbuffer * rbuf, size_t idx, int offset, u8 __user * buf, size_t len)
	      -------------------------------------^
	  If declarator-id:
	    Invalid definition: Expecting "," or ")" in parameters_and_qualifiers, got "*". [error at 102]
	      ssize_t dvb_ringbuffer_pkt_read_user (struct dvb_ringbuffer * rbuf, size_t idx, int offset, u8 __user * buf, size_t len)
	      ------------------------------------------------------------------------------------------------------^

So, we have to remove it from the function prototype.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

This reverts commit 47d6d752.

Commit f42ddca7 (doc-rst: kernel-doc directive, fix state machine
reporter) from Marcus Heiser provides a better fix, so this configuration
change is no longer needed.

Add a reporter replacement that assigns the correct source name and line
number to a system message, as recorded in a ViewList.

[1] http://mid.gmane.org/CAKMK7uFMQ2wOp99t-8v06Om78mi9OvRZWuQsFJD55QA20BB3iw@mail.gmail.comSigned-off-by: Markus Heiser <markus.heiser@darmarIT.de>
Tested-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

Now that the new Sphinx world order is taking over, the information in
kernel-doc-nano-HOWTO.txt is outmoded.  I hate to remove it altogether,
since it's one of those files that people expect to find.  But we can add a
warning and fix all the other pointers to it.
Reminded-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

Unfortunately warnings generated after parsing in sphinx can end up
with entirely bogus files and line numbers as sources. Strangely for
outright errors this is not a problem. Trying to convert warnings to
errors also doesn't fix it.

The only way to get useful output out of sphinx to be able to root
cause the error seems to be enabling keep_warnings, which inserts
a System Message into the actual output. Not pretty at all, but I
don't really want to fix up core rst/sphinx code, and this gets the job
done meanwhile.

Cc: Markus Heiser <markus.heiser@darmarit.de>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

Update and expand the CEC documentation. Especially w.r.t. non-blocking
mode.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Even when the adapter is configured for CEC 1.4, we still check and
use the CEC 2.0 parts of struct cec_log_addrs. Although these aren't
used in CEC messages, the information contained in them is still of
use in the CEC framework itself, so keep this information.

Also zero the unused trailing features[] data and unused logical address
data so the contents isn't random data.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

For POLLOUT poll only checked if the adapter was configured, not
if there was room in the transmit queue. Add that check.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Just pass the transmitted CEC message to all CEC adapters.
This implements the Monitor All mode for vivid.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

The main message loop checks if the physical address was valid, and if
not it is assumed that the adapter had been unconfigured.

However, this check is no longer correct, instead it should check
that both adap->is_configured and adap->is_configuring are false.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

The size of the transmit queue was unlimited, which meant that
in non-blocking mode you could flood the CEC adapter with messages
to be transmitted.

Limit this to 18 messages.

Also print the number of pending transmits and the timeout value
in the status debugfs file.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Ensure that the unused part of the msg array is zeroed. This is
required by CEC 2.0 when receiving shorter messages than expected.
In that case the remaining bytes are assumed to be 0.

There are no such CEC messages yet, but it is required to be future proof.

And since we're doing it for received messages, do it for transmitted
messages as well. It's unambiguous this way.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

The filehandle was set to NULL when in non-blocking mode or when
no reply is needed.

This is wrong: the filehandle is needed in non-blocking mode to ensure
that the result of the transmit can be obtained through CEC_RECEIVE.

And the 'reply' check was also incorrect since it should have checked the
timeout field (the reply can be 0). In any case, when in blocking mode
there is no need to set the fh to NULL either.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Before transmitting a message clear all status fields and always fill
in the sequence number. Make sure the sequence number is never 0.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

When CEC_RECEIVE returns a message the original timeout field
was overwritten. Restore the timeout field.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Sphinx is really evil when an older version finds an extra
attribute for the :toctree: tag: it simply ignores everything
and produce documents without any chapter inside!

As we're now using tags available only on Sphinx 1.4.x, we
need to use some creative ways to add a title before the
table of contents. Do that by using a css class.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

The titles at the media books were misleading, and some books
were not numbered.

Rename the kAPI book to better reflect its contents, be more
consistent on the initial rst file for each book and better
name them.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

I ended by adding twice each media header, because I saw some
missing stuff at the documents. It seems it was my mistake,
as everything seems to be there.

So, remove those extra stuff, to avoid duplicating the
documentation of the functions.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Move the contents of this file to bttv.rst and saa7134.rst.

With that, we can finally remove Documentation/video4linux.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Import the contents of hauppauge-wintv-cx88-ir.txt, after
converted to ReST into cx88.rst file.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

There are some information about missing/wrong documentation at
cx231xx datasheet. Add it to the cx88 chapter.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Finally, adds the content of README.vbi at cx2341x.rst after
its conversion to ReST format.

Now, add information about this chipset and its driver is
inside a single chapter at the media/v4l-drivers book.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

The README.hm12 file describes the proprietary format used
by this driver for raw format, called HM12. Add its description
at the document, after converted to ReST.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Convert it to ReST format and add to cx2341x.rst file.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Add the contents of fw-upload.txt, after converting it to
ReST format.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Convert the content to ReST and add it at the cx231xx.rst
file.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Add the contents of fw-dma.txt, converted to ReST, and
drop the old file.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Convert it to ReST and add its contents at this file.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Convert its contents to ReST and add to cx2341x.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Convert the contents of fw-decoder-registers.txt to ReST and
add it to cx2341x.rst file.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Commit 795ae7a0 ("mm: scale kswapd watermarks in proportion to
memory") properly added the description of the new knob to
Documentation/sysctl/vm.txt, but forgot to add it to the list of files
in /proc/sys/vm. Let's fix that.
Signed-off-by: Jerome Marchand <jmarchan@redhat.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

move the contents of fw-decoder-api.txt to cx2341x and
convert it to ReST file, adding it to media/v4l-drivers
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Convert bttv/Tuners to ReST and add it to the media/v4l-drivers book.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Convert it to ReST and add it to media/v4l-drivers book.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>