Convert Samsung PWM (S3C, S5P and Exynos SoCs) bindings to DT schema
format using json-schema.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>

Convert generic PWM controller bindings to DT schema format using
json-schema.  The consumer bindings are provided by dt-schema.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Paul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: Rob Herring <robh@kernel.org>

SC9863A use the same serial device which SC9836 uses.
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Signed-off-by: Rob Herring <robh@kernel.org>

Convert the sprd-uart binding to DT schema using json-schema.
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
[robh: dual license GPL/BSD]
Signed-off-by: Rob Herring <robh@kernel.org>

Added bindings for Unisoc SC9863A board and SC9863A SoC.
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Signed-off-by: Rob Herring <robh@kernel.org>

Convert Unisoc (formerly Spreadtrum) SoC bindings to DT schema format
using json-schema.
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
[robh: dual license GPL/BSD]
Signed-off-by: Rob Herring <robh@kernel.org>

Property fetching functions which return number of successfully fetched
properties should not state that out-values are only modified if 0 is
returned. Fix this. Also, "pointer to return value" is slightly suboptimal
phrase as "return value" commonly refers to value function returns (not via
arguments). Rather use "pointer to found values".
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Reviewed-by: Frank Rowand <frowand.list@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>

The syscon binding is a pretty loose one, with everyone having a bunch of
vendor specific compatibles.

In order to start the effort to describe them using YAML, let's create a
binding that tolerates additional, not listed, compatibles.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Rob Herring <robh@kernel.org>

Convert the STM32 CRYP binding to DT schema format using json-schema
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Signed-off-by: Rob Herring <robh@kernel.org>

Convert the STM32 CRC binding to DT schema format using json-schema
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Signed-off-by: Rob Herring <robh@kernel.org>

Convert the STM32 timers binding to DT schema format using json-schema
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Signed-off-by: Rob Herring <robh@kernel.org>

Schema errors can cause make to exit before useful information is
printed. This leaves developers wondering what's wrong. It can be
overcome passing '-k' to make, but that's not an obvious solution.
There's 2 scenarios where this happens.

When using DT_SCHEMA_FILES to validate with a single schema, any error
in the schema results in processed-schema.yaml being empty causing a
make error. The result is the specific errors in the schema are never
shown because processed-schema.yaml is the first target built. Simply
making processed-schema.yaml last in extra-y ensures the full schema
validation with detailed error messages happen first.

The 2nd problem is while schema errors are ignored for
processed-schema.yaml, full validation of the schema still runs in
parallel and any schema validation errors will still stop the build when
running validation of dts files. The fix is to not add the schema
examples to extra-y in this case. This means 'dtbs_check' is no longer a
superset of 'dt_binding_check'. Update the documentation to make this
clear.

Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Jeffrey Hugo <jhugo@codeaurora.org>
Signed-off-by: Rob Herring <robh@kernel.org>

Convert Samsung Exynos Soc Power Domain bindings to DT schema format using
json-schema.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>

Convert Generic Power Domain bindings to DT schema format using
json-schema.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>

Add "samsung,exynos5420-mali" binding
Signed-off-by: Marian Mihailescu <mihailescu2m@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>

Define a compatible string for Realtek RTD1619 SoC family.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Rob Herring <robh@kernel.org>

Define a compatible string for Realtek RTD1295 SoC family.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Rob Herring <robh@kernel.org>

Instead of grouping alphabetically by third-party vendor, leading to
one-element enums, start sorting by Mali model number, as done for
Utgard.

This already allows us to de-duplicate two "arm,mali-t760" sections and
will make it easier to add new vendor compatibles.

Fixes: 553cedf6 ("dt-bindings: Convert Arm Mali Midgard GPU to DT schema")
Fixes: 1be5b54d ("dt-bindings: gpu: mali-midgard: Add samsung exynos5250 compatible")
Cc: Rob Herring <robh@kernel.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
[robh: don't resort everything to avoid conflicts]
Signed-off-by: Rob Herring <robh@kernel.org>

Even the DT maintainer gets confused. The schema in dt-schema was wrong
too, so this was passing validation until trying to add some common
incorrect patterns to check.

Fixes: 58fbe999 ("dt-bindings: example-schema: Add some additional examples and commentary")
Signed-off-by: Rob Herring <robh@kernel.org>

Now that we have the DT validation in place, let's convert the device tree
bindings for the Amlogic G12A DWC3 Glue Bindings over to a YAML schemas,
the AXG and GXL glue bindings will be converted later.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
[robh: drop maxItems on vbus-supply]
Signed-off-by: Rob Herring <robh@kernel.org>

Add the soc specific compatible for sc7180 smmu-500
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>

Now that we have the DT validation in place, let's convert the device tree
bindings for the TI SoC Davinci/OMAP/Keystone2 MDIO Controllerr over to a
YAML schemas.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: Rob Herring <robh@kernel.org>

Some binding that were introduced early on got a comment to enable
additionalProperties, but we couldn't due to the generic properties being
reported as errors.

The way we're dealing with this now is to use the draft-08's
unevaluatedProperties (even though the tools doesn't do anything with it
yet).

Let's convert those old bindings to it.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Rob Herring <robh@kernel.org>

Convert the qcom,qcs404 interconnect provider binding to DT schema.
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>

The "syscon" compatible string was introduced mainly to allow sharing
of the CHIPID IO region between multiple drivers. However, such sharing
can be also done without an additional compatible so remove "syscon".
Suggested-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>

Convert Samsung S3C/S5P/Exynos Serial/UART bindings to DT schema format
using json-schema.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>

The Allwinner SoCs have an mUSB controller that is supported in Linux, with
a matching Device Tree binding.

Now that we have the DT validation in place, let's convert the device tree
bindings for that controller over to a YAML schemas.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Rob Herring <robh@kernel.org>

Using Makefile's wildcard with absolute path to detect
the presence of libyaml results in false-positive
detection when cross-compiling e.g. in yocto environment.
The latter results in build error:
| scripts/dtc/yamltree.o: In function `yaml_propval_int':
| yamltree.c: undefined reference to `yaml_sequence_start_event_initialize'
| yamltree.c: undefined reference to `yaml_emitter_emit'
| yamltree.c: undefined reference to `yaml_scalar_event_initialize'
...
Use pkg-config to locate libyaml to address this scenario.
Signed-off-by: Pavel Modilaynen <pavel.modilaynen@axis.com>
[robh: silence stderr]
Signed-off-by: Rob Herring <robh@kernel.org>

Add new -c/--color options, to enhance the diff output with color, and
improve the user's experience.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Frank Rowand <frank.rowand@sony.com>
Tested-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>

The older Allwinner SoCs have a CAN controller that is supported in Linux,
with a matching Device Tree binding.

Now that we have the DT validation in place, let's convert the device tree
bindings for that controller over to a YAML schemas.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>

Remove unneeded indentation in blank line and space at end of line.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>

Now that we have the DT validation in place, let's convert the device tree
bindings for the Amlogic Canvas over to a YAML schemas.

Cc: Maxime Jourdan <mjourdan@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
[robh: update title]
Signed-off-by: Rob Herring <robh@kernel.org>

Add new entries for linux,rc-map-name:
- rc-khadas
- rc-odroid
- rc-tanix-tx3mini
- rc-wetek-hub
- rc-wetek-play2
- rc-x96max
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Rob Herring <robh@kernel.org>

Now that we have the DT validation in place, let's convert the device tree
bindings for the Amlogic AO-CEC controller over to a YAML schemas.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Rob Herring <robh@kernel.org>

The DT bindings for MAX77650 MFD have now been converted to YAML.
Update the MAINTAINERS entry for this set of drivers.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Rob Herring <robh@kernel.org>

Convert the binding document for MAX77650 core MFD module to YAML.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Rob Herring <robh@kernel.org>

Convert the binding document for MAX77650 LED module to YAML.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Rob Herring <robh@kernel.org>

Convert the binding document for MAX77650 charger module to YAML.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Acked-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>

Convert the binding document for MAX77650 regulator module to YAML.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>

Convert the binding document for MAX77650 onkey module to YAML.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>