Replace the bit left shift operation with the BIT_ULL() macro and remove
the unnecessary mask off operation against the bit_nr variable.

This mask is only there for legacy reasons. Originally it was 31 (0x1f)
and the bit_nr variable spread across an mc_filter array with two u32
elements. Now, this mask is not needed because its value is 0x3f and the
mc_filter variable is an u64 type.

In this situation, the 26 bit right shift operation against the value
returned by the ether_crc function set the bit_nr variable to the
following value:

bit 31 to bit 6 -> All 0 (due to the bit shift operation happens over an
unsigned type).

bit 5 to bit 0 -> The 6 msb bits of the value returned by the ether_crc
function.

The purpose of the 0x3f mask against the bit_nr variable is to reset
(set to 0) the 26 msb bits (bit 31 to bit 6), but these bits are yet 0.
So, the mask off operation is now unnecessary.
Signed-off-by: Oscar Carter <oscar.carter@gmx.com>
Link: https://lore.kernel.org/r/20200314161441.4870-1-oscar.carter@gmx.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes for simple typos in C comments.
Found using checkpatch.pl.
Signed-off-by: R Veera Kumar <vkor@vkten.in>
Link: https://lore.kernel.org/r/20200312091042.GA4246@tulip.localSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add space around operators for improving the code
readability.
Reported by checkpatch.pl

git diff -w shows no difference.
diff of the .o files before and after the changes shows no difference.
Signed-off-by: Shreeya Patel <shreeya.patel23498@gmail.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Link: https://lore.kernel.org/r/20200311131742.31068-1-shreeya.patel23498@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Since snprintf() returns the would-be-output size instead of the
actual output size, the succeeding calls may go beyond the given
buffer limit.  Fix it by replacing with scnprintf().
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200311092451.23933-4-tiwai@suse.deSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Since snprintf() returns the would-be-output size instead of the
actual output size, the succeeding calls may go beyond the given
buffer limit.  Fix it by replacing with scnprintf().
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200311092451.23933-3-tiwai@suse.deSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Since snprintf() returns the would-be-output size instead of the
actual output size, the succeeding calls may go beyond the given
buffer limit.  Fix it by replacing with scnprintf().
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200311092451.23933-2-tiwai@suse.deSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Since snprintf() returns the would-be-output size instead of the
actual output size, the succeeding calls may go beyond the given
buffer limit.  Fix it by replacing with scnprintf().
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200311091944.23185-1-tiwai@suse.deSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merged the DT binding documentation of SDIO and SPI into a single file.
Removed documentation for some of the properties which are not required
and handled review comments received in [1] & [2].

[1]. https://lore.kernel.org/linux-wireless/20200303020230.GA15543@bogus
[2]. https://lore.kernel.org/linux-wireless/20200303015558.GA6876@bogusSigned-off-by: Ajay Singh <ajay.kathat@microchip.com>
Link: https://lore.kernel.org/r/20200307085523.7320-4-ajay.kathat@microchip.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Modified the 'clock-names' property by removing '_clk' from its name and
remove '_spi/sdio' from 'compatible' string.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Link: https://lore.kernel.org/r/20200307085523.7320-3-ajay.kathat@microchip.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Make use of 'interrupts' property instead of using gpio for handling
the interrupt as suggested in [1].

[1]. https://lore.kernel.org/linux-wireless/20200303015558.GA6876@bogusSigned-off-by: Ajay Singh <ajay.kathat@microchip.com>
Link: https://lore.kernel.org/r/20200307085523.7320-2-ajay.kathat@microchip.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixed WARNING: Missing a blank line after declarations in qlge_mpi.c to
the following lines:

WARNING: Missing a blank line after declarations
FILE: drivers/staging/qlge/qlge_mpi.c:94:

WARNING: Missing a blank line after declarations
FILE: drivers/staging/qlge/qlge_mpi.c:240:

WARNING: Missing a blank line after declarations
FILE: drivers/staging/qlge/qlge_mpi.c:258:

WARNING: Missing a blank line after declarations
FILE: drivers/staging/qlge/qlge_mpi.c:356:

WARNING: Missing a blank line after declarations
FILE: drivers/staging/qlge/qlge_mpi.c:915:

WARNING: Missing a blank line after declarations
FILE: drivers/staging/qlge/qlge_mpi.c:1099:
Signed-off-by: Carlos Henrique Lima Melara <charlesmelara@outlook.com>
Link: https://lore.kernel.org/r/CP2PR80MB434086A44A1ED5BB662B9D70A8FC0@CP2PR80MB4340.lamprd80.prod.outlook.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix checkpatch check: 'informations' may be misspelled - perhaps
'information'? in rtw_mlme_ext.c:1151.
Signed-off-by: Andre Pinto <andrealmeidap1996@gmail.com>
Link: https://lore.kernel.org/r/20200311012638.18889-1-andrealmeidap1996@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Improve line grouping for better understanding the course of action and where
every comment belongs to.
Signed-off-by: Lourdes Pedrajas <lu@pplo.net>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Link: https://lore.kernel.org/r/3fada7fe76047ecf06d0345c0ab9216424a126f2.1583848946.git.lu@pplo.netSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Every time priv->op_mode is not NL80211_IFTYPE_ADHOC it sets ATIM Window, but
this feature it is marked TODO in 2014 and did go untouched since 2015.
Signed-off-by: Lourdes Pedrajas <lu@pplo.net>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Link: https://lore.kernel.org/r/d9b8e434e09cb8885026a71441bf3a6919dba3da.1583848946.git.lu@pplo.netSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The clock related code concerns me from the very beginning because
there are some set ups got from legacy driver that are not documented
anywhere. According to the programming guide 0x7c is 'CPE_ROSC_SEL1'
register and 0x80 is 'CPU_CPE_CN'. I do think this set up is not needed
at all and the proper thing to do is just enable the clock bit for each
pcie port. Hence remove useless code and do the right thing which is
setting up the clock bit for each port enabled.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20200310113459.30539-1-sergio.paracuellos@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There are two #if 0 blocks that have no recent history of any change.
Remove those code blocks for improved readability of the code.
Signed-off-by: Deepak R Varma <mh12gx2825@gmail.com>
Link: https://lore.kernel.org/r/20200310212545.GA8914@deeUbuntuSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

struct hif_cnf_reset is not used anywhere in wfx. It's parent file
hif_api_cmd.h is imported form some other driver, hence some functions
in it are not used. This is one of them. Hence remove it.
Signed-off-by: Kaaira Gupta <kgupta@es.iitr.ac.in>
Link: https://lore.kernel.org/r/20200310142509.25632-7-kgupta@es.iitr.ac.inSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

int ret is uneccessarily declared and 0 assigned to it. Return o
directly instead.
Signed-off-by: Kaaira Gupta <kgupta@es.iitr.ac.in>
Link: https://lore.kernel.org/r/20200310142509.25632-6-kgupta@es.iitr.ac.inSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

remove extra space after a cast in file data_tx.h
Signed-off-by: Kaaira Gupta <kgupta@es.iitr.ac.in>
Link: https://lore.kernel.org/r/20200310142509.25632-5-kgupta@es.iitr.ac.inSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

remove extra spaces after casts in file data_tx.c
Signed-off-by: Kaaira Gupta <kgupta@es.iitr.ac.in>
Link: https://lore.kernel.org/r/20200310142509.25632-4-kgupta@es.iitr.ac.inSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

policies[i].uploaded is a bool. 1 is assigned to it. Change it to bool.
Signed-off-by: Kaaira Gupta <kgupta@es.iitr.ac.in>
Link: https://lore.kernel.org/r/20200310142509.25632-3-kgupta@es.iitr.ac.inSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

remove an unesseccary space after a cast in file data_rx.c
Signed-off-by: Kaaira Gupta <kgupta@es.iitr.ac.in>
Link: https://lore.kernel.org/r/20200310142509.25632-2-kgupta@es.iitr.ac.inSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Now that there is a "real" solution for exfat in the vfs tree queued up
to be merged in 5.7-rc1 the "old" exfat code in staging can be removed.

Many thanks to Valdis for doing the work to get this into the tree in
the first place, it was greatly appreciated.
Acked-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Cc: Pali Rohár <pali@kernel.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Namjae Jeon <namjae.jeon@samsung.com>
Cc: Sungjong Seo <sj1557.seo@samsung.com>
Cc: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20200310105421.GA2810679@kroah.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Function 'mt7621_pcie_init_virtual_bridges' is a bit mess and can be
refactorized properly in a cleaner way. Introduce new 'pcie_rmw' inline
function helper to do clear and set the correct bits this function needs
to work.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20200308091928.17177-1-sergio.paracuellos@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When softsynthu device fails the register, "/dev/softsynthu" should be
printed instead of "/dev/softsynth".
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@gmail.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Cc: William Hubbs <w.d.hubbs@gmail.com>
Cc: Chris Brannon <chris@the-brannons.com>
Cc: Kirk Reiser <kirk@reisers.ca>
Link: https://lore.kernel.org/r/20200305072151.403-1-zhenzhong.duan@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The variable merely toggles true to false and is unused.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Link: https://lore.kernel.org/r/130a4078-2502-a381-46c4-b473815e153b@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mac80211 is the only user of in_use to start it and should
not be true when so.

So internal toggling of this variable is not relevant.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Link: https://lore.kernel.org/r/69585034-4318-4bec-7d9b-f64a167df237@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In a recent change to the SPI subsystem in commit <bebcfd27>
("spi: introduce `delay` field for `spi_transfer` +
spi_transfer_delay_exec()"), a new `delay` struct was added
to replace the `delay_usecs`. This change replaces the current
`delay_usecs` with `delay` for this driver.

The `spi_transfer_delay_exec()` function [in the SPI framework] makes sure
that both `delay_usecs` & `delay` are used (in this order to preserve
backwards compatibility).
Signed-off-by: Sergiu Cuciurean <sergiu.cuciurean@analog.com>
Link: https://lore.kernel.org/r/20200304074319.22107-1-sergiu.cuciurean@analog.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In a recent change to the SPI subsystem in commit <bebcfd27>
("spi: introduce `delay` field for `spi_transfer` +
spi_transfer_delay_exec()"), a new `delay` struct was added
to replace the `delay_usecs`. This change replaces the current
`delay_usecs` with `delay` for this driver.

The `spi_transfer_delay_exec()` function [in the SPI framework] makes sure
that both `delay_usecs` & `delay` are used (in this order to preserve
backwards compatibility).
Signed-off-by: Sergiu Cuciurean <sergiu.cuciurean@analog.com>
Link: https://lore.kernel.org/r/20200304073746.19664-1-sergiu.cuciurean@analog.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add space around & operator for improving the code
readability.
Signed-off-by: Shreeya Patel <shreeya.patel23498@gmail.com>
Acked-by: Julia Lawall <julia.lawall@inria.fr>
Link: https://lore.kernel.org/r/20200308192152.26403-1-shreeya.patel23498@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove unused code.
Signed-off-by: Lourdes Pedrajas <lu@pplo.net>
Link: https://lore.kernel.org/r/20200308225400.17267-1-lu@pplo.netSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Align code to match open parenthesis.
Signed-off-by: Payal Kshirsagar <payalskshirsagar1234@gmail.com>
Link: https://lore.kernel.org/r/20200309165138.5313-1-payalskshirsagar1234@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove function ffsSetAttr() which is unused.
Signed-off-by: Lourdes Pedrajas <lu@pplo.net>
Link: https://lore.kernel.org/r/20200309165801.4827-1-lu@pplo.netSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove comparison to "true" from if statement to
maintain the kernel coding style.

Reported by checkpatch.pl
Signed-off-by: Shreeya Patel <shreeya.patel23498@gmail.com>
Link: https://lore.kernel.org/r/20200308201703.31709-1-shreeya.patel23498@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove line over 80 characters.
Signed-off-by: Payal Kshirsagar <payalskshirsagar1234@gmail.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Link: https://lore.kernel.org/r/20200308123834.3377-1-payalskshirsagar1234@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Blank line is not necessary before a close brace '}', remove it.
Signed-off-by: Payal Kshirsagar <payalskshirsagar1234@gmail.com>
Reviewed-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200309165528.5721-1-payalskshirsagar1234@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Align code to open parenthesis.
Signed-off-by: Payal Kshirsagar <payalskshirsagar1234@gmail.com>
Link: https://lore.kernel.org/r/20200309164515.4880-1-payalskshirsagar1234@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Nothing outside of low level architecture code is supposed to look up
interrupt descriptors and fiddle with them.

Replace the open coded abuse by calling generic_handle_irq().

This still does not explain why and in which context this connection
magic is injecting interrupts in the first place and why this is correct
and safe, but at least the API abuse is gone.

Fixes: 036aad9d ("greybus: gpio: add interrupt handling support")
Fixes: 2611ebef ("greybus: gpio: don't call irq-flow handler directly")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/87o8t9boqq.fsf@nanos.tec.linutronix.deSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove function gb_i2c_smbus_xfer() which is unused.
Signed-off-by: Lourdes Pedrajas <lu@pplo.net>
Link: https://lore.kernel.org/r/20200309170643.4947-1-lu@pplo.netSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Blank lines aren't necessary after an open brace '{'.
Signed-off-by: Payal Kshirsagar <payalskshirsagar1234@gmail.com>
Link: https://lore.kernel.org/r/20200309162728.4342-4-payalskshirsagar1234@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>