- 12 Jun, 2013 24 commits
-
-
-
-
Stanislaw Gruszka authored
My change: commit cee2c731 Author: Stanislaw Gruszka <sgruszka@redhat.com> Date: Fri Oct 5 13:44:09 2012 +0200 rt2800: use BBP_R1 for setting tx power unfortunately does not work well with RT5390 and RT3290 chips as they require different temperature compensation TX power settings (TSSI tuning). Since that commit make wireless connection very unstable on those chips, restore previous behavior to fix regression. Once we implement proper TSSI tuning on 5390/3290 we can restore back setting TX power by BBP_R1 register for those chips. Reported-and-tested-by:
Mike Romberg <mike-romberg@comcast.net> Cc: stable@vger.kernel.org Signed-off-by:
Stanislaw Gruszka <sgruszka@redhat.com> Acked-by:
Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Arend van Spriel authored
This patch fixes a regression introduced by: commit 6da3b6c4 Author: Hauke Mehrtens <hauke@hauke-m.de> Date: Sun Mar 24 01:45:52 2013 +0100 brcmsmac: remove brcms_bss_cfg->associated The regression behaviour was described on mailing list. http://mid.gmane.org/5197DC4F.7030503@broadcom.com: "On laptop I installed kernel with brcmsmac compiled as module. It comes up and associates during boot, but after logging in there is no connectivity. Triggering reassoc gives connectivity for some time, but after a while (1-2 min) it stops." Before the mentioned commit the return value of the function brcms_c_ps_allowed() was always false, which is desired behaviour as power-save is not supported at the moment. Therefor, the function is changed to just return false instead of simply reverting the mentioned commit. Bug: 58471 <https://bugzilla.kernel.org/show_bug.cgi?id=58471> Signed-off-by:
Arend van Spriel <arend@broadcom.com> Signed-off-by:
-
Stanislaw Gruszka authored
Since driver does not use control.rates[0].count, we have never set that variable. But currently, after rate control API rewrite, this is required by mac80211. Otherwise legacy rates control does not work and we transmit always at 1Mbit/s on pre 11n networks. Signed-off-by:
-
Kees Cook authored
The module parameter "fwpostfix" is userspace controllable, unfiltered, and is used to define the firmware filename. b43_do_request_fw() populates ctx->errors[] on error, containing the firmware filename. b43err() parses its arguments as a format string. For systems with b43 hardware, this could lead to a uid-0 to ring-0 escalation. CVE-2013-2852 Signed-off-by:
Kees Cook <keescook@chromium.org> Cc: stable@vger.kernel.org Signed-off-by:
-
Sujith Manoharan authored
The ath9k rate control algorithm has various architectural issues that make it a poor fit in scenarios like congested environments etc. An example: https://bugzilla.redhat.com/show_bug.cgi?id=927191 Change the default to minstrel which is more robust in such cases. The ath9k RC code is left in the driver for now, maybe it can be removed altogether later on. Cc: stable@vger.kernel.org Cc: Jouni Malinen <jouni@qca.qualcomm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by:
-
Felix Fietkau authored
This reverts commit 68d9e1fa This change reduces rx sensitivity with no apparent extra benefit. It looks like it was meant for testing in a specific scenario, but it was never properly validated. Cc: rmanohar@qca.qualcomm.com Cc: stable@vger.kernel.org Signed-off-by:
Felix Fietkau <nbd@openwrt.org> Signed-off-by:
-
Sujith Manoharan authored
Almost all the DMA issues which have plagued ath9k (in station mode) for years are related to PS. Disabling PS usually "fixes" the user's connection stablility. Reports of DMA problems are still trickling in and are sitting in the kernel bugzilla. Until the PS code in ath9k is given a thorough review, disbale it by default. The slight increase in chip power consumption is a small price to pay for improved link stability. Cc: stable@vger.kernel.org Signed-off-by:
-
Yijing Wang authored
Fix build error for il_pm_ops if CONFIG_PM is set but CONFIG_PM_SLEEP is not set. ERROR: "il_pm_ops" [drivers/net/wireless/iwlegacy/iwl4965.ko] undefined! ERROR: "il_pm_ops" [drivers/net/wireless/iwlegacy/iwl3945.ko] undefined! make[1]: *** [__modpost] Error 1 make: *** [modules] Error 2 Signed-off-by:
Yijing Wang <wangyijing@huawei.com> Cc: Stanislaw Gruszka <sgruszka@redhat.com> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: netdev@vger.kernel.org Cc: linux-wireless@vger.kernel.org Cc: Jingoo Han <jg1.han@samsung.com> Acked-by:
Jingoo Han <jg1.han@samsung.com> Signed-off-by:
-
Larry Finger authored
This false leak indication is avoided with a no-leak annotation to kmemleak. Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
-
Eliad Peller authored
Due to a typo, the current code copies only sizeof(cmd->channels_2) bytes, which is smaller than the correct sizeof(cmd->channels_5) size, resulting in a partial scan (some channels are skipped). Signed-off-by:
Eliad Peller <eliad@wizery.com> Signed-off-by:
Luciano Coelho <coelho@ti.com> Signed-off-by:
-
Luciano Coelho authored
The minimum firmware version required for singlerole after recent driver changes is 6/7.3.10.0.133. Reported-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Luciano Coelho authored
There was a typo in commit 8675f9 (wlcore/wl12xx/wl18xx: verify multi-role and single-role fw versions), which was causing the multirole firmware for wl127x (WiLink6) to be rejected. The actual minimum version needed for wl127x multirole is 6.5.7.0.42. Reported-by:
Levi Pearson <levipearson@gmail.com> Reported-by:
Michael Scott <hashcode0f@gmail.com> Cc: stable@kernel.org # 3.9+ Signed-off-by:
-
Larry Finger authored
Driver rtl8192cu can connect to WPA2 networks, but fails for any other encryption method. The cause is a failure to set the rate control data blocks. These changes fix https://bugzilla.redhat.com/show_bug.cgi?id=952793 and https://bugzilla.redhat.com/show_bug.cgi?id=761525. Signed-off-by:
-
Mark A. Greer authored
When reading the contents of '/sys/kernel/debug/mwifiex/p2p0/info', the following panic occurs: $ cat /sys/kernel/debug/mwifiex/p2p0/info Unable to handle kernel paging request at virtual address 74706164 pgd = de530000 [74706164] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM Modules linked in: phy_twl4030_usb omap2430 musb_hdrc mwifiex_sdio mwifiex CPU: 0 PID: 1635 Comm: cat Not tainted 3.10.0-rc1-00010-g1268390 #1 task: de16b6c0 ti: de048000 task.ti: de048000 PC is at strnlen+0xc/0x4c LR is at string+0x3c/0xf8 pc : [<c02c123c>] lr : [<c02c2d1c>] psr: a0000013 sp : de049e10 ip : c06efba0 fp : de6d2092 r10: bf01a260 r9 : ffffffff r8 : 74706164 r7 : 0000ffff r6 : ffffffff r5 : de6d209c r4 : 00000000 r3 : ff0a0004 r2 : 74706164 r1 : ffffffff r0 : 74706164 Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user Control: 10c5387d Table: 9e530019 DAC: 00000015 Process cat (pid: 1635, stack limit = 0xde048240) Stack: (0xde049e10 to 0xde04a000) 9e00: de6d2092 00000002 bf01a25e de6d209c 9e20: de049e80 c02c438c 0000000a ff0a0004 ffffffff 00000000 00000000 de049e48 9e40: 00000000 2192df6d ff0a0004 ffffffff 00000000 de6d2092 de049ef8 bef3cc00 9e60: de6b0000 dc358000 de6d2000 00000000 00000003 c02c45a4 bf01790c bf01a254 9e80: 74706164 bf018698 00000000 de59c3c0 de048000 de049f80 00001000 bef3cc00 9ea0: 00000008 00000000 00000000 00000000 00000000 00000000 00000000 00000000 9ec0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 9ee0: 00000000 00000000 00000000 00000001 00000000 00000000 6669776d 20786569 9f00: 20302e31 2e343128 392e3636 3231702e 00202933 00000000 00000003 c0294898 9f20: 00000000 00000000 00000000 00000000 de59c3c0 c0107c04 de554000 de59c3c0 9f40: 00001000 bef3cc00 de049f80 bef3cc00 de049f80 00000000 00000003 c0108a00 9f60: de048000 de59c3c0 00000000 00000000 de59c3c0 00001000 bef3cc00 c0108b60 9f80: 00000000 00000000 00001000 bef3cc00 00000003 00000003 c0014128 de048000 9fa0: 00000000 c0013f80 00001000 bef3cc00 00000003 bef3cc00 00001000 00000000 9fc0: 00001000 bef3cc00 00000003 00000003 00000001 00000001 00000001 00000003 9fe0: 00000000 bef3cbdc 00011984 b6f1127c 60000010 00000003 18dbdd2c 7f7bfffd [<c02c123c>] (strnlen+0xc/0x4c) from [<c02c2d1c>] (string+0x3c/0xf8) [<c02c2d1c>] (string+0x3c/0xf8) from [<c02c438c>] (vsnprintf+0x1e8/0x3e8) [<c02c438c>] (vsnprintf+0x1e8/0x3e8) from [<c02c45a4>] (sprintf+0x18/0x24) [<c02c45a4>] (sprintf+0x18/0x24) from [<bf01790c>] (mwifiex_info_read+0xfc/0x3e8 [mwifiex]) [<bf01790c>] (mwifiex_info_read+0xfc/0x3e8 [mwifiex]) from [<c0108a00>] (vfs_read+0xb0/0x144) [<c0108a00>] (vfs_read+0xb0/0x144) from [<c0108b60>] (SyS_read+0x44/0x70) [<c0108b60>] (SyS_read+0x44/0x70) from [<c0013f80>] (ret_fast_syscall+0x0/0x30) Code: e12fff1e e3510000 e1a02000 0a00000d (e5d03000) ---[ end trace ca98273dc605a04f ]--- The panic is caused by the mwifiex_info_read() routine assuming that there can only be four modes (0-3) which is an invalid assumption. For example, when testing P2P, the mode is '8' (P2P_CLIENT) so the code accesses data beyond the bounds of the bss_modes[] array which causes the panic. Fix this by updating bss_modes[] to support the current list of modes and adding a check to prevent the out-of-bounds access from occuring in the future when more modes are added. Signed-off-by:
Mark A. Greer <mgreer@animalcreek.com> Acked-by:
Bing Zhao <bzhao@marvell.com> Signed-off-by:
-
Johan Hedberg authored
If hci_dev_open fails we need to ensure that the corresponding mgmt_set_powered command gets an appropriate response. This patch fixes the missing response by adding a new mgmt_set_powered_failed function that's used to indicate a power on failure to mgmt. Since a situation with the device being rfkilled may require special handling in user space the patch uses a new dedicated mgmt status code for this. Signed-off-by:
Johan Hedberg <johan.hedberg@intel.com> Cc: stable@vger.kernel.org Acked-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by:
-
Johan Hedberg authored
There has been code in place to check that the L2CAP length header matches the amount of data received, but many PDU handlers have not been checking that the data received actually matches that expected by the specific PDU. This patch adds passing the length header to the specific handler functions and ensures that those functions fail cleanly in the case of an incorrect amount of data. Signed-off-by:
-
Bing Zhao authored
The register offsets have been changed in SD8897 and newer chips. Define a new btmrvl_sdio_card_reg map for SD88xx. Signed-off-by:
Frank Huang <frankh@marvell.com> Signed-off-by:
-
Johan Hedberg authored
LE-only controllers do not support extended features so any kind of host feature bit checks do not make sense for them. This patch fixes code used for both single-mode (LE-only) and dual-mode (BR/EDR/LE) to use the HCI_LE_ENABLED flag instead of the "Host LE supported" feature bit for LE support tests. Signed-off-by:
-
Moshe Benji authored
Since driver does not use control.rates[0].count, we have never set that variable. But currently, after rate control API rewrite, this is required by mac80211. Otherwise legacy rates control does not work and we transmit always at 1Mbit/s on pre 11n networks. [same fix as for iwlegacy, thanks Stanislaw!] Signed-off-by:
Moshe Benji <Moshe.Benji@intel.com> Reviewed-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com>
-
Simon Wunderlich authored
The order of parameters was mixed up, introduced in commit "mac80211: improve the rate control API" Cc: Felix Fietkau <nbd@openwrt.org> Signed-off-by:
Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by:
Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by:
-
Simon Wunderlich authored
When a CAC is running and stop_ap is called (e.g. when hostapd is killed while performing CAC), the CAC must be aborted immediately. Otherwise ieee80211_stop_ap() will try to stop it when it's too late - wdev->channel is already NULL and the abort event can not be generated. Signed-off-by:
-
Johannes Berg authored
There are some APs, notably 2G/3G/4G Wifi routers, specifically the "Onda PN51T", "Vodafone PocketWiFi 2", "ZTE MF60" and a similar T-Mobile branded device [1] that erroneously don't include all the needed information in (re)association response frames. Work around this by assuming the information is the same as it was in the beacon or probe response and using the data from there instead. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=58881. [1] https://bbs.archlinux.org/viewtopic.php?pid=1277305 Note that this requires marking the first ieee802_11_parse_elems() argument const, otherwise we'd get a compiler warning. Cc: stable@vger.kernel.org Reported-and-tested-by:
Michal Zajac <manwe@manwe.pl> Signed-off-by:
-
- 04 Jun, 2013 3 commits
-
-
Emmanuel Grumbach authored
Somehow, the Tx flags for BAR were completely wrong. Signed-off-by:
-
Nikolay Martynov authored
First step of chain noise calibration process had disable flag check inverted. Chain noise calibration never started because of this. Tested on intel 5300 with two antennas attached. The driver correctly disabled one chain. Cc: stable@vger.kernel.org Signed-off-by:
Nikolay Martynov <mar.kolya@gmail.com> Reviewed-by:
-
Johannes Berg authored
If the opmode modules aren't modular, there's no point in printing an error message that request_module() failed. This will happen because the probe runs during iwlwifi's init and the opmode is only added during its init. Reported-by:
Jörg Otte <jrg.otte@gmail.com> Reviewed-by:
-
- 28 May, 2013 10 commits
-
-
Gabor Juhos authored
Accessing the OTP memory on AR9950 causes a data bus like this: Data bus error, epc == 801f7774, ra == 801f7774 Oops[#1]: CPU: 0 PID: 1 Comm: swapper Not tainted 3.10.0-rc3 #592 task: 87c28000 ti: 87c22000 task.ti: 87c22000 $ 0 : 00000000 00000061 deadc0de 00000000 $ 4 : b8115f18 00015f18 00000007 00000004 $ 8 : 00000001 7c7c3c7c 7c7c7c7c 7c7c7c7c $12 : 7c7c3c7c 80320a68 00000000 7c7c7c3c $16 : 87cd8010 00015f18 00000007 00000000 $20 : 00000064 00000004 87c23c7c 8035210c $24 : 00000000 801f3674 $28 : 87c22000 87c23b48 00000001 801f7774 Hi : 00000000 Lo : 00000064 epc : 801f7774 ath9k_hw_wait+0x58/0xb0 Not tainted ra : 801f7774 ath9k_hw_wait+0x58/0xb0 Status: 1000cc03 KERNEL EXL IE Cause : 4080801c PrId : 00019750 (MIPS 74Kc) Modules linked in: Process swapper (pid: 1, threadinfo=87c22000, task=87c28000, ts=00000000) Stack : 0000000f 00000061 00002710 8006240c 00000001 87cd8010 87c23bb0 87cd8010 00000000 00000004 00000003 80210c7c 000000b3 67fa8000 0000032a 000006fe 000003e8 00000002 00000028 87c23bf0 000003ff 80210d24 803e5630 80210e28 00000000 00000007 87cd8010 00007044 00000004 00000061 000003ff 000001ff 87c26000 87cd8010 00000220 87cd8bb8 80210000 8020fcf4 87c22000 87c23c08 ... Call Trace: [<801f7774>] ath9k_hw_wait+0x58/0xb0 [<80210c7c>] ar9300_otp_read_word+0x80/0xd4 [<80210d24>] ar9300_read_otp+0x54/0xb0 [<8020fcf4>] ar9300_check_eeprom_header+0x1c/0x40 [<80210fe4>] ath9k_hw_ar9300_fill_eeprom+0x118/0x39c [<80206650>] ath9k_hw_eeprom_init+0x74/0xb4 [<801f96d0>] ath9k_hw_init+0x7ec/0x96c [<801e65ec>] ath9k_init_device+0x340/0x758 [<801f35d0>] ath_ahb_probe+0x21c/0x2c0 [<801c041c>] driver_probe_device+0xc0/0x1e4 [<801c05ac>] __driver_attach+0x6c/0xa4 [<801bea08>] bus_for_each_dev+0x64/0xa8 [<801bfa40>] bus_add_driver+0xcc/0x24c [<801c0954>] driver_register+0xbc/0x17c [<803f8fc0>] ath9k_init+0x5c/0x88 [<800608fc>] do_one_initcall+0xec/0x1a0 [<803e6a68>] kernel_init_freeable+0x13c/0x200 [<80309cdc>] kernel_init+0x1c/0xe4 [<80062450>] ret_from_kernel_thread+0x10/0x18 On the AR9550, the OTP registers are located at the same address as on the AR9340. Use the correct values to avoid the error. Cc: stable@vger.kernel.org # 3.6+ Signed-off-by:Gabor Juhos <juhosg@openwrt.org> Signed-off-by:
-
Hante Meuleman authored
For p2p client mode powersave mode should be kept disabled. It is working but inefficient. In general p2p links do no benefit from this mode, because these links are setup temporarily to transfer data. Reviewed-by:
Hante Meuleman <meuleman@broadcom.com> Signed-off-by:
-
Hante Meuleman authored
Multi channel support was disabled. This patch will enable it and configure the P2P GO on the correct frequency when multi channel is used. Reviewed-by:
-
Arend van Spriel authored
Upon deleting a P2P_CLIENT/GO interface the vif and consequently the wdev is freed before the net_device is actually being unregistered but cfg80211 still needs to access the wdev. Using destructor field to free the net_device and vif. Reviewed-by:
-
Arend van Spriel authored
When registration fails the net device is no longer needed. Free the net device and remove reference to private data from the driver. Reviewed-by:
-
Arend van Spriel authored
Pass the struct brcmf_cfg80211_info instance instead of obtaining through vif itself using vif->wdev. This is needed as the netdev associated with this vif is already unregistered. Reviewed-by:
-
Hante Meuleman authored
The firmware requires that on p2p setup when net interfaces are created or updated that they start initially with the same channel as the channel in use for the current connection (if any). If none exists take default channel 11. Reviewed-by:
Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by:
Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by:
-
Hante Meuleman authored
ARP offloading should only be used in STA or P2P client mode. It is currently configured once at init. When being configured for AP ARP offloading should be turned off and when AP mode is left it can be turned back on. Cc: stable@vger.kernel.org Reviewed-by:
-
-
-
- 27 May, 2013 3 commits
-
-
Emmanuel Grumbach authored
In 63b77bf4 iwlwifi: dvm: don't send zeroed LQ cmd I tried to avoid to send zeroed LQ cmd, but I made a (very) stupid mistake in the memcmp. Since this patch has been ported to stable, the fix should go to stable too. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=58341 Cc: stable@vger.kernel.org Reported-by:
Hinnerk van Bruinehsen <h.v.bruinehsen@fu-berlin.de> Signed-off-by:
-
Helmut Schaa authored
When changing the MAC address of a single vif mac80211 will check if the new address fits into the address mask specified by the driver. This only needs to be done when using multiple BSSIDs. Hence, check the new address only against all other vifs. Also fix the MAC address assignment on new interfaces if the user changed the address of a vif such that perm_addr is not covered by addr_mask anymore. Resolves: https://bugzilla.kernel.org/show_bug.cgi?id=57371Signed-off-by:
Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by:
Jakub Kicinski <kubakici@wp.pl> Reported-by:
Alessandro Lannocca <alessandro.lannocca@gmail.com> Cc: Alessandro Lannocca <alessandro.lannocca@gmail.com> Cc: Bruno Randolf <br1@thinktube.com> Signed-off-by:
-
Johannes Berg authored
Since Eric's commit efe117ab ("Speedup ieee80211_remove_interfaces") there's a bug in mac80211 when it unregisters with AP_VLAN interfaces up. If the AP_VLAN interface was registered after the AP it belongs to (which is the typical case) and then we get into this code path, unregister_netdevice_many() will crash because it isn't prepared to deal with interfaces being closed in the middle of it. Exactly this happens though, because we iterate the list, find the AP master this AP_VLAN belongs to and dev_close() the dependent VLANs. After this, unregister_netdevice_many() won't pick up the fact that the AP_VLAN is already down and will do it again, causing a crash. Cc: stable@vger.kernel.org [2.6.33+] Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
-
