- 04 Jan, 2017 32 commits
-
-
Hans de Goede authored
Move the charger_init_hw_regs() above the power_supply_register call, the axp288_charger_usb_set_property() uses axp288_chrg_info.max_cv and .max_cc which get set by charger_init_hw_regs(). Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
-
Hans de Goede authored
The extcon notifier work calls power_supply_changed on the power_supply we register, so the extcon notifiers should be registered after we register the power_supply. While touching this code anyways, refactor the code for the 3 cable types into a loop to avoid code repetition. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
-
Hans de Goede authored
Use devm_power_supply_register instead of power_supply_register, this avoids the need to do manual cleanup and results in quite a nice code cleanup. Note it may seem excessive to add a "struct device *dev" helper local variable for the 1 time it is used in this patch, but future patches in this series also use it. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
-
Sebastian Reichel authored
-
Nicolas Saenz Julienne authored
This adds support for sbs-charger compilant chips as defined here: http://sbs-forum.org/specs/sbc110.pdf This was tested on a arm board connected to an LTC4100 battery charger chip. Signed-off-by: Nicolas Saenz Julienne <nicolas.saenz@prodys.net> Signed-off-by: Sebastian Reichel <sre@kernel.org>
-
Nicolas Saenz Julienne authored
Adds device tree documentation for SBS charger compilant devices as defined here: http://sbs-forum.org/specs/sbc110.pdfSigned-off-by: Nicolas Saenz Julienne <nicolas.saenz@prodys.net> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Sebastian Reichel <sre@kernel.org>
-
Peter Rosin authored
So what if there is a status_gpio specified? bq24735_charger_is_present() do have a working fallback for the case of no status_gpio. Simplify this by not special casing setups w/o status_gpio, folding two consecutive if-blocks in the process. Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Sebastian Reichel <sre@kernel.org>
-
Peter Rosin authored
During probe, it makes no sense to take care to first not issue any i2c commands to verify if the connected part really is a bq24735, to later simply fail the probe in the next step when trying to configure the charger. So, delay configuration of the charging parameters until the charger is accessible (i.e. when the AC adapter is present) as part of enabling the charging. This also fixes the rather serious issue that the charging parameters are lost when the AC adapter is disconnected. Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Sebastian Reichel <sre@kernel.org>
-
Peter Rosin authored
bq24735_enable_charging() needs to call bq24735_config_charging(), which is something to change later, this is just a preparatory patch. Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Sebastian Reichel <sre@kernel.org>
-
Milo Kim authored
"tps65217-charger" is more appropriate name because the driver supports not only AC but also USB charger. Signed-off-by: Milo Kim <woogyom.kim@gmail.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
-
Milo Kim authored
Rename it as tps65217_charger_get_property(). Signed-off-by: Milo Kim <woogyom.kim@gmail.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
-
Milo Kim authored
Replace 'ac_props' with 'charger_props'. Signed-off-by: Milo Kim <woogyom.kim@gmail.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
-
Milo Kim authored
Replace 'ac' of tps65217_charger structure with 'psy'. Signed-off-by: Milo Kim <woogyom.kim@gmail.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
-
Milo Kim authored
This driver supports AC and USB chargers. Generic name is preferred. Replace 'ac_online' with 'online'. Signed-off-by: Milo Kim <woogyom.kim@gmail.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
-
Milo Kim authored
TPS65217 has two charger interrupts - AC and USB power status change. Interrupt number in the TPS65217 driver data: IRQ number is only used on requesting the interrupt, so no need to keep it inside the driver data. Interrupt handler: Check not only AC but also USB charger status. In both cases, enable charging operation. Interrupt request: If an interrupt number is invalid, then use legacy polling thread. Otherwise, create IRQ threads to handle AC and USB charger event. Signed-off-by: Milo Kim <woogyom.kim@gmail.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
-
Milo Kim authored
Use the task_struct variable for running polling thread. If polling task is activated, then use it to stop running thread. This is a preceding step of supporting two interrupts of TPS65217 charger, so checking single IRQ number is not appropriate when the module is removed. Signed-off-by: Milo Kim <woogyom.kim@gmail.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
-
Chanwoo Choi authored
This patch replaces the deprecated extcon API as following: - extcon_set_cable_state_() -> extcon_set_state_sync() Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
-
Chanwoo Choi authored
This patch uses the resource-managed extcon API for extcon_register_notifier() and replaces the deprecated extcon API as following: - extcon_get_cable_state_() -> extcon_get_state() Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
-
Srikant Ritolia authored
Use managed resource function devm_power_supply_register instead of power_supply_register to simplify the error path by allowing unregistering to happen automatically on error and remove. Removing max8997_battery_remove function also as it is now redundant. Also removing out of memory printk message after kzalloc as there is already enough information on failure. Signed-off-by: Srikant Ritolia <s.ritolia@samsung.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
-
Quentin Schulz authored
The X-Powers AXP223 shares most of its behaviour with the AXP221 PMIC but allows the VBUS power supply max current to be set to 100mA (like the AXP209 PMIC). This basically adds a new compatible to the VBUS power supply driver and adds a check on the compatible when setting current max limit. Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Sebastian Reichel <sre@kernel.org>
-
Quentin Schulz authored
This adds the "x-powers,axp223-usb-power-supply" to the list of compatibles for AXP20X VBUS power supply driver. Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Sebastian Reichel <sre@kernel.org>
-
Quentin Schulz authored
AXP20X and AXP22X PMICs allow setting the min voltage and max current of VBUS power supply. This adds entries in sysfs to allow to do so. Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Sebastian Reichel <sre@kernel.org>
-
Quentin Schulz authored
This replaces calls to of_device_is_compatible to check data field of of_device_id matched when probing the driver. Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Sebastian Reichel <sre@kernel.org>
-
Peter Rosin authored
If the ac-detect gpio does not support interrupts, provide a fallback to poll the gpio at a configurable interval. Signed-off-by: Peter Rosin <peda@axentia.se> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Sebastian Reichel <sre@kernel.org>
-
Hans de Goede authored
In order for the MSB -> LSB latching to work correctly we must read the 2 8 bit registers of a 12 bit value in one consecutive read. This fixes voltage_ocv reporting inconsistent values on my tablet. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
-
Hans de Goede authored
In order for the MSB -> LSB latching to work correctly we must read the 2 8 bit registers of a 15 bit value in one consecutive read. This fixes charge_full reporting 3498768 on some reads and 3354624 one other reads on my tablet (for the 3354624 value the raw LSB is 0x00). Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
-
Hans de Goede authored
If reading the register fails, return the actual error code, instead of the uninitialized val variable; Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
-
Peter Rosin authored
The ACOK pin on the bq24735 is active-high, of course meaning that when AC is OK the pin is high. However, all Tegra dts files have incorrectly specified active-high even though the signal is inverted on the Tegra boards. This has worked since the Linux driver has also inverted the meaning of the GPIO. Fix this situation by simply specifying in the bindings what everybody else agrees on; that the ti,ac-detect-gpios is active on AC adapter absence. Signed-off-by: Peter Rosin <peda@axentia.se> Acked-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
-
Peter Rosin authored
Providing value bits outside of the mask is pointless. Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Sebastian Reichel <sre@kernel.org>
-
Hans de Goede authored
When the axp288_faul_gauge driver was originally merged, it was merged with a dependency on some other driver providing platform data for it. However the battery-data-framework which should provide that data never got merged, resulting in x86 tablets / laptops with an axp288 having no working battery monitor, as before this commit the driver would simply return -ENODEV if there is no platform data. This commit removes the dependency on the platform_data instead checking that the firmware has initialized the fuel-gauge and reading the info back from the pmic. What is missing from the read-back info is the table to map raw adc values to temperature, so this commit drops the temperature and temperature limits properties. The min voltage, charge design and model name info is also missing. Note that none of these are really important for userspace to have. All other functionality is preserved and actually made available by this commit. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=88471Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
-
Hans de Goede authored
When the axp288_charger driver was originally merged, it was merged with a dependency on some other driver providing platform data for it. However the battery-data-framework which should provide that data never got merged, so the axp288_charger as merged upstream has never worked, its probe method simply always returns -ENODEV. This commit removes the dependency on the platform_data instead reading back the charging current and charging voltage that the firmware has set and using those values as the maximum values the user may set. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
-
Hans de Goede authored
Make charger_init_hw_regs propagate i2c errors, instead of only warning about them and then ignoring them. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
-
- 26 Dec, 2016 2 commits
-
-
Linus Torvalds authored
-
Larry Finger authored
I am getting the following warning when I build kernel 4.9-git on my PowerBook G4 with a 32-bit PPC processor: AS arch/powerpc/kernel/misc_32.o arch/powerpc/kernel/misc_32.S:299:7: warning: "CONFIG_FSL_BOOKE" is not defined [-Wundef] This problem is evident after commit 989cea5c ("kbuild: prevent lib-ksyms.o rebuilds"); however, this change in kbuild only exposes an error that has been in the code since 2005 when this source file was created. That was with commit 9994a338 ("powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S"). The offending line does not make a lot of sense. This error does not seem to cause any errors in the executable, thus I am not recommending that it be applied to any stable versions. Thanks to Nicholas Piggin for suggesting this solution. Fixes: 9994a338 ("powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S") Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 25 Dec, 2016 6 commits
-
-
Linus Torvalds authored
The timer type simplifications caused a new gcc warning: drivers/base/power/domain.c: In function ‘genpd_runtime_suspend’: drivers/base/power/domain.c:562:14: warning: ‘time_start’ may be used uninitialized in this function [-Wmaybe-uninitialized] elapsed_ns = ktime_to_ns(ktime_sub(ktime_get(), time_start)); despite the actual use of "time_start" not having changed in any way. It appears that simply changing the type of ktime_t from a union to a plain scalar type made gcc check the use. The variable wasn't actually used uninitialized, but gcc apparently failed to notice that the conditional around the use was exactly the same as the conditional around the initialization of that variable. Add an unnecessary initialization just to shut up the compiler. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer type cleanups from Thomas Gleixner: "This series does a tree wide cleanup of types related to timers/timekeeping. - Get rid of cycles_t and use a plain u64. The type is not really helpful and caused more confusion than clarity - Get rid of the ktime union. The union has become useless as we use the scalar nanoseconds storage unconditionally now. The 32bit timespec alike storage got removed due to the Y2038 limitations some time ago. That leaves the odd union access around for no reason. Clean it up. Both changes have been done with coccinelle and a small amount of manual mopping up" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: ktime: Get rid of ktime_equal() ktime: Cleanup ktime_set() usage ktime: Get rid of the union clocksource: Use a plain u64 instead of cycle_t
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull SMP hotplug notifier removal from Thomas Gleixner: "This is the final cleanup of the hotplug notifier infrastructure. The series has been reintgrated in the last two days because there came a new driver using the old infrastructure via the SCSI tree. Summary: - convert the last leftover drivers utilizing notifiers - fixup for a completely broken hotplug user - prevent setup of already used states - removal of the notifiers - treewide cleanup of hotplug state names - consolidation of state space There is a sphinx based documentation pending, but that needs review from the documentation folks" * 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/armada-xp: Consolidate hotplug state space irqchip/gic: Consolidate hotplug state space coresight/etm3/4x: Consolidate hotplug state space cpu/hotplug: Cleanup state names cpu/hotplug: Remove obsolete cpu hotplug register/unregister functions staging/lustre/libcfs: Convert to hotplug state machine scsi/bnx2i: Convert to hotplug state machine scsi/bnx2fc: Convert to hotplug state machine cpu/hotplug: Prevent overwriting of callbacks x86/msr: Remove bogus cleanup from the error path bus: arm-ccn: Prevent hotplug callback leak perf/x86/intel/cstate: Prevent hotplug callback leak ARM/imx/mmcd: Fix broken cpu hotplug handling scsi: qedi: Convert to hotplug state machine
-
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linuxLinus Torvalds authored
Pull turbostat updates from Len Brown. * 'turbostat' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: tools/power turbostat: remove obsolete -M, -m, -C, -c options tools/power turbostat: Make extensible via the --add parameter tools/power turbostat: Denverton uses a 25 MHz crystal, not 19.2 MHz tools/power turbostat: line up headers when -M is used tools/power turbostat: fix SKX PKG_CSTATE_LIMIT decoding tools/power turbostat: Support Knights Mill (KNM) tools/power turbostat: Display HWP OOB status tools/power turbostat: fix Denverton BCLK tools/power turbostat: use intel-family.h model strings tools/power/turbostat: Add Denverton RAPL support tools/power/turbostat: Add Denverton support tools/power/turbostat: split core MSR support into status + limit tools/power turbostat: fix error case overflow read of slm_freq_table[] tools/power turbostat: Allocate correct amount of fd and irq entries tools/power turbostat: switch to tab delimited output tools/power turbostat: Gracefully handle ACPI S3 tools/power turbostat: tidy up output on Joule counter overflow
-
Nicholas Piggin authored
Add a new page flag, PageWaiters, to indicate the page waitqueue has tasks waiting. This can be tested rather than testing waitqueue_active which requires another cacheline load. This bit is always set when the page has tasks on page_waitqueue(page), and is set and cleared under the waitqueue lock. It may be set when there are no tasks on the waitqueue, which will cause a harmless extra wakeup check that will clears the bit. The generic bit-waitqueue infrastructure is no longer used for pages. Instead, waitqueues are used directly with a custom key type. The generic code was not flexible enough to have PageWaiters manipulation under the waitqueue lock (which simplifies concurrency). This improves the performance of page lock intensive microbenchmarks by 2-3%. Putting two bits in the same word opens the opportunity to remove the memory barrier between clearing the lock bit and testing the waiters bit, after some work on the arch primitives (e.g., ensuring memory operand widths match and cover both bits). Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Bob Peterson <rpeterso@redhat.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Andrew Lutomirski <luto@kernel.org> Cc: Andreas Gruenbacher <agruenba@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Nicholas Piggin authored
A page is not added to the swap cache without being swap backed, so PageSwapBacked mappings can use PG_owner_priv_1 for PageSwapCache. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Bob Peterson <rpeterso@redhat.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Andrew Lutomirski <luto@kernel.org> Cc: Andreas Gruenbacher <agruenba@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-