- 21 May, 2020 4 commits
-
-
Gary Leshner authored
This patch implements the mechanism to accelerate the transmit side of a multiple transmit queue RDMA netdev by submitting the packets to the SDMA engine directly instead of sending through the verbs layer. This patch also changes the UD/SEND_ONLY op to output the entropy value in byte 0 of deth[1]. UD/SEND_ONLY_WITH_IMMEDIATE uses the previous behavior with no entropy value being output. The code in the ipoib rdma netdev which submits tx requests upon successful submission will call trace_sdma_output_ibhdr to output the ibhdr to the trace buffer. Link: https://lore.kernel.org/r/20200511160548.173205.45616.stgit@awfm-01.aw.intel.comReviewed-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by:
Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by:
Gary Leshner <Gary.S.Leshner@intel.com> Signed-off-by:
Kaike Wan <kaike.wan@intel.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com>
-
Kaike Wan authored
The accelerated IP capability bit is added to allow users to control which feature is enabled and disabled. Link: https://lore.kernel.org/r/20200511160541.173205.96870.stgit@awfm-01.aw.intel.comReviewed-by:
-
Gal Pressman authored
The host info feature allows the driver to infrom the EFA device firmware with system configuration for debugging and troubleshooting purposes. The host info buffer is passed as an admin command DMA mapped control buffer, and is unmapped and freed once the command CQE is consumed. Currently, the setting of host info is done for each device on its probe. Failing to set the host info for the device shall not disturb the probe flow, any errors will be discarded. Link: https://lore.kernel.org/r/20200512152204.93091-3-galpress@amazon.comReviewed-by:
Firas JahJah <firasj@amazon.com> Reviewed-by:
Guy Tzalik <gtzalik@amazon.com> Signed-off-by:
Gal Pressman <galpress@amazon.com> Signed-off-by:
-
Gal Pressman authored
When using a control buffer the ctrl_data bit should be set in order to indicate the control buffer address is valid, not ctrl_data_indirect which is used when the control buffer itself is indirect. Fixes: e9c6c537 ("RDMA/efa: Add common command handlers") Link: https://lore.kernel.org/r/20200512152204.93091-2-galpress@amazon.comReviewed-by:
Yossi Leybovich <sleybo@amazon.com> Signed-off-by:
-
- 20 May, 2020 1 commit
-
-
Aharon Landau authored
Missing INIT2INIT entry in the list of modify commands caused DEVX applications to be unable to modify_qp for this transition state. Add the MLX5_CMD_OP_INIT2INIT_QP opcode to the list of allowed DEVX opcodes. Fixes: e662e14d ("IB/mlx5: Add DEVX support for modify and query commands") Link: https://lore.kernel.org/r/20200513095550.211345-1-leon@kernel.orgSigned-off-by:
Aharon Landau <aharonl@mellanox.com> Reviewed-by:
Maor Gottlieb <maorg@mellanox.com> Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
-
- 19 May, 2020 15 commits
-
-
Lijun Ou authored
When rq/srq sge length is smaller than sq sge length, it will produce a local length error and may cause the bus to hang. Therefore, for rq wqe and srq wqe, one reserved sge pointing to a reserved mr is used to avoid this error. Link: https://lore.kernel.org/r/1588931159-56875-10-git-send-email-liweihang@huawei.comSigned-off-by:
Lijun Ou <oulijun@huawei.com> Signed-off-by:
Weihang Li <liweihang@huawei.com> Signed-off-by:
-
Xi Wang authored
Rename the PAGE_ADDR_SHIFT as HNS_HW_PAGE_SHIFT to make code more readable. Link: https://lore.kernel.org/r/1588931159-56875-9-git-send-email-liweihang@huawei.comSigned-off-by:
Xi Wang <wangxi11@huawei.com> Signed-off-by:
-
Weihang Li authored
srq_context is a local variables and is only used to get some fields from buffer of mailbox. It's meaningless to copy mailbox's buffer's contents back to it. Link: https://lore.kernel.org/r/1588931159-56875-8-git-send-email-liweihang@huawei.comSigned-off-by:
-
Lang Cheng authored
The length information should be stored in the struct ib_mr object, otherwise the length value of a valid mr object would always be 0. Link: https://lore.kernel.org/r/1588931159-56875-7-git-send-email-liweihang@huawei.comSigned-off-by:
Lang Cheng <chenglang@huawei.com> Signed-off-by:
-
Weihang Li authored
For ilog2(x), if x is 0 and not a constant variable, it will return -1. And there will be an error as below: hns3 0000:7d:00.0 hns_0: Local work queue 0x8 catast error, sub_event type is: 2 So modify to_hr_hem_entries_shift() to return 0 if conut is 0. Fixes: 54d66387 ("RDMA/hns: Optimize WQE buffer size calculating process") Link: https://lore.kernel.org/r/1588931159-56875-6-git-send-email-liweihang@huawei.comSigned-off-by:
-
Weihang Li authored
srq's attribute max_wr should be 1 less than the total count of wqe. Fixes: ffb1308b ("RDMA/hns: Move SRQ code to the reasonable place") Link: https://lore.kernel.org/r/1588931159-56875-5-git-send-email-liweihang@huawei.comSigned-off-by:
-
Wenpeng Liang authored
When allocating eq buffer, the size of base address page should be defined by eqe_ba_pg_sz instead of srqwqe_ba_pg_sz. Fixes: 477a0a38 ("RDMA/hns: Optimize 0 hop addressing for EQE buffer") Link: https://lore.kernel.org/r/1588931159-56875-4-git-send-email-liweihang@huawei.comSigned-off-by:
Wenpeng Liang <liangwenpeng@huawei.com> Signed-off-by:
-
Lang Cheng authored
The firmware has reduced the number of descriptions of command HNS_ROCE_OPC_QUERY_PF_TIMER_RES to 1. The driver needs to adapt, otherwise the hardware will report error 4(CMD_NEXT_ERR). Fixes: 0e40dc2f ("RDMA/hns: Add timer allocation support for hip08") Link: https://lore.kernel.org/r/1588931159-56875-3-git-send-email-liweihang@huawei.comSigned-off-by:
-
Lijun Ou authored
The qkey queried through the query ud qp verb is a fixed value and it should be read from qp context. Fixes: 926a01dc ("RDMA/hns: Add QP operations support for hip08 SoC") Link: https://lore.kernel.org/r/1588931159-56875-2-git-send-email-liweihang@huawei.comSigned-off-by:
-
Gustavo A. R. Silva authored
The current codebase makes use of one-element arrays in the following form: struct something { int length; u8 data[1]; }; struct something *instance; instance = kmalloc(sizeof(*instance) + size, GFP_KERNEL); instance->length = size; memcpy(instance->data, source, size); but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. So, replace the one-element array with a flexible-array member. Also, make use of the new struct_size() helper to properly calculate the size of struct siw_pbl. This issue was found with the help of Coccinelle and, audited and fixed _manually_. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732 ("cxgb3/l2t: Fix undefined behaviour") Link: https://lore.kernel.org/r/20200519233018.GA6105@embeddedorSigned-off-by:Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by:
-
Danil Kipnis authored
When Block Device Layer is disabled, BLK_MAX_SEGMENT_SIZE is undefined. The rtrs is a transport library and should compile independently of the block layer. The desired max segment size should be passed down by the user. Introduce max_segment_size parameter for the rtrs_clt_open() call. Fixes: f7a7a5c2 ("block/rnbd: client: main functionality") Fixes: 6a98d71d ("RDMA/rtrs: client: main functionality") Fixes: cb80329c ("RDMA/rtrs: client: private header with client structs and functions") Fixes: b5c27cdb ("RDMA/rtrs: public interface header to establish RDMA connections") Link: https://lore.kernel.org/r/20200519111419.924170-1-danil.kipnis@cloud.ionos.comSigned-off-by:
Danil Kipnis <danil.kipnis@cloud.ionos.com> Reported-by:
Randy Dunlap <rdunlap@infradead.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Signed-off-by:
-
Wei Yongjun authored
Fix to return negative error code -ENOMEM from the some error handling cases instead of 0, as done elsewhere in this function. Fixes: 9cb83748 ("RDMA/rtrs: server: main functionality") Fixes: 91b11610 ("RDMA/rtrs: server: sysfs interface functions") Link: https://lore.kernel.org/r/20200519091912.134358-1-weiyongjun1@huawei.comReported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by:
-
Gustavo A. R. Silva authored
Remove the if-statement and return the value contained in _err_, unconditionally. Link: https://lore.kernel.org/r/20200519163612.GA6043@embeddedor Addresses-Coverity-ID: 1493753 ("Identical code for different branches") Fixes: 6a98d71d ("RDMA/rtrs: client: main functionality") Signed-off-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
-
Dan Carpenter authored
These > comparisons should be >= to prevent accessing one element beyond the end of the buffer. Fixes: 9cb83748 ("RDMA/rtrs: server: main functionality") Link: https://lore.kernel.org/r/20200519154525.GA66801@mwandaSigned-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
-
Dan Carpenter authored
The problem is that "req->sg_cnt" is an unsigned int so if "nr" is negative, it gets type promoted to a high positive value and the condition is false. This patch fixes it by handling negatives separately. Fixes: 6a98d71d ("RDMA/rtrs: client: main functionality") Link: https://lore.kernel.org/r/20200519133223.GN2078@kadamSigned-off-by:
Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by:
-
- 17 May, 2020 20 commits
-
-
Kamal Heib authored
Avoid disabling device management for devices that don't support Management datagrams (MADs) by checking if the "mad_agent" pointer is initialized before calling ib_modify_port, also fix the error flow in srpt_refresh_port() to disable device management if ib_register_mad_agent() fail. Fixes: 09f8a148 ("RDMA/srpt: Fix handling of SR-IOV and iWARP ports") Link: https://lore.kernel.org/r/20200514114720.141139-1-kamalheib1@gmail.comSigned-off-by:
Kamal Heib <kamalheib1@gmail.com> Reviewed-by:
-
Shay Drory authored
Current description doesn't include new devices, change it by updating to have more generic description and remove DRIVER_NAME and DRIVER_VERSION defines. Link: https://lore.kernel.org/r/20200513095304.210240-1-leon@kernel.orgSigned-off-by:
Shay Drory <shayd@mellanox.com> Signed-off-by:
-
Xiongfeng Wang authored
When I cat module parameter 'srpt_service_guid', it displays as follows. It is better to add a newline for easy reading. [root@hulk-202 ~]# cat /sys/module/ib_srpt/parameters/srpt_service_guid 0x0205cdfffe8346b9[root@hulk-202 ~]# Link: https://lore.kernel.org/r/1589182629-27743-1-git-send-email-wangxiongfeng2@huawei.comSigned-off-by:
Xiongfeng Wang <wangxiongfeng2@huawei.com> Signed-off-by:
-
Jason Gunthorpe authored
The uverbs layer largely duplicate the code in ib_create_srq(), with the slight difference that it passes in a udata. Move all the code together into ib_create_srq_user() and provide an inline for kernel users, similar to other create calls. Link: https://lore.kernel.org/r/20200506082444.14502-6-leon@kernel.orgSigned-off-by:
Yishai Hadas <yishaih@mellanox.com> Signed-off-by:
-
Yishai Hadas authored
Fix create WQ to use the given user handle, in addition dropped some duplicated code from this flow. Fixes: fd3c7904 ("IB/core: Change idr objects to use the new schema") Fixes: f213c052 ("IB/uverbs: Add WQ support") Link: https://lore.kernel.org/r/20200506082444.14502-9-leon@kernel.orgSigned-off-by:
-
Yishai Hadas authored
Both wq_context and srq_context are some leftover from the past in uverbs layer, they are not really in use, drop them. Link: https://lore.kernel.org/r/20200506082444.14502-5-leon@kernel.orgSigned-off-by:
-
Jack Wang authored
Danil and I will maintain RNBD/RTRS modules. Link: https://lore.kernel.org/r/20200511135131.27580-26-danil.kipnis@cloud.ionos.comSigned-off-by:
-
Jack Wang authored
README with description of major sysfs entries, sysfs documentation are moved to ABI dir as Bart suggested. Link: https://lore.kernel.org/r/20200511135131.27580-25-danil.kipnis@cloud.ionos.comSigned-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Jack Wang authored
Add rnbd Makefile, Kconfig and also corresponding lines into upper block layer files. Link: https://lore.kernel.org/r/20200511135131.27580-24-danil.kipnis@cloud.ionos.comSigned-off-by:
-
Jack Wang authored
This is the sysfs interface to rnbd mapped devices on server side: /sys/class/rnbd-server/ctl/devices/<device_name>/ |- block_dev | *** link pointing to the corresponding block device sysfs entry | |- sessions/<session-name>/ | *** sessions directory | |- read_only | *** is devices mapped as read only | |- mapping_path *** relative device path provided by the client during mapping Link: https://lore.kernel.org/r/20200511135131.27580-23-danil.kipnis@cloud.ionos.comSigned-off-by: -
Jack Wang authored
This provides helper functions for IO submitting to block dev. Link: https://lore.kernel.org/r/20200511135131.27580-22-danil.kipnis@cloud.ionos.comSigned-off-by:
-
Jack Wang authored
This is main functionality of rnbd-server module, which handles RTRS events and rnbd protocol requests, like map (open) or unmap (close) device. Also server side is responsible for processing incoming IBTRS IO requests and forward them to local mapped devices. Link: https://lore.kernel.org/r/20200511135131.27580-21-danil.kipnis@cloud.ionos.comSigned-off-by:
-
Jack Wang authored
This header describes main structs and functions used by rnbd-server module, namely structs for managing sessions from different clients and mapped (opened) devices. Link: https://lore.kernel.org/r/20200511135131.27580-20-danil.kipnis@cloud.ionos.comSigned-off-by:
-
Jack Wang authored
This is the sysfs interface to rnbd block devices on client side: /sys/class/rnbd-client/ctl/ |- map_device | *** maps remote device | |- devices/ *** all mapped devices /sys/block/rnbd<N>/rnbd/ |- unmap_device | *** unmaps device | |- state | *** device state | |- session | *** session name | |- mapping_path *** path of the dev that was mapped on server Link: https://lore.kernel.org/r/20200511135131.27580-19-danil.kipnis@cloud.ionos.comSigned-off-by: -
Jack Wang authored
This is main functionality of rnbd-client module, which provides interface to map remote device as local block device /dev/rnbd<N> and feeds RTRS with IO requests. Link: https://lore.kernel.org/r/20200511135131.27580-18-danil.kipnis@cloud.ionos.comSigned-off-by:
-
Jack Wang authored
This header describes main structs and functions used by rnbd-client module, mainly for managing RNBD sessions and mapped block devices, creating and destroying sysfs entries. Link: https://lore.kernel.org/r/20200511135131.27580-17-danil.kipnis@cloud.ionos.comSigned-off-by:
-
Jack Wang authored
These are common private headers with rnbd protocol structures, logging, sysfs and other helper functions, which are used on both client and server sides. Link: https://lore.kernel.org/r/20200511135131.27580-16-danil.kipnis@cloud.ionos.comSigned-off-by:
-
Jack Wang authored
README with description of major sysfs entries, sysfs documentation has been moved to ABI dir as suggested by Bart. Link: https://lore.kernel.org/r/20200511135131.27580-15-danil.kipnis@cloud.ionos.comSigned-off-by:
-
Jack Wang authored
Add rtrs Makefile, Kconfig and also corresponding lines into upper layer infiniband/ulp files. Link: https://lore.kernel.org/r/20200511135131.27580-14-danil.kipnis@cloud.ionos.comSigned-off-by:
-
Jack Wang authored
This is the sysfs interface to rtrs sessions on server side: /sys/class/rtrs-server/<SESS-NAME>/ *** rtrs session accepted from a client peer | |- paths/<SRC@DST>/ *** established paths from a client in a session | |- disconnect | *** disconnect path | |- hca_name | *** HCA name | |- hca_port | *** HCA port | |- stats/ *** current path statistics | |- rdma Link: https://lore.kernel.org/r/20200511135131.27580-13-danil.kipnis@cloud.ionos.comSigned-off-by:
-
