- 03 Jan, 2017 40 commits
-
-
Marcin Nowakowski authored
Current init code initialises bootmem allocator with all of the low memory that it assumes is available, but does not check for reserved memory block, which can lead to corruption of data that may be stored there. Move bootmem's allocation map to a location that does not cross any reserved regions Signed-off-by:
Marcin Nowakowski <marcin.nowakowski@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14609/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Marcin Nowakowski authored
Memories managed through boot_mem_map are generally expected to define non-crossing areas. However, if part of a larger memory block is marked as reserved, it would still be added to bootmem allocator as an available block and could end up being overwritten by the allocator. Prevent this by explicitly marking the memory as reserved it if exists in the range used by bootmem allocator. Signed-off-by:
-
Marcin Nowakowski authored
When KEXEC is enabled but crashkernel details are not passed through the kernel commandline unnecessary resources are requested (start==end==0) Signed-off-by:
-
Marcin Nowakowski authored
MIPS does not currently define ELF_CORE_COPY_REGS macros and as a result the generic implementation is used. The generic version attempts to do directly map (struct pt_regs) into (elf_gregset_t), which isn't correct for MIPS platforms and also triggers a BUG() at runtime in include/linux/elfcore.h:16 (BUG_ON(sizeof(*elfregs) != sizeof(*regs))) [ralf@linux-mips.org: Add semicolons to the macro definitions as I do not apply https://patchwork.linux-mips.org/patch/14588/ for now.] Signed-off-by:
-
Marcin Nowakowski authored
Current register dump methods for MIPS are implemented inside ptrace methods, but there will be other uses in the kernel for them, so keep them separately in process.c and use those definitions for ptrace instead. Signed-off-by:
-
Marcin Nowakowski authored
Kconfig entries are not aligned properly, so remove incorrect whitespace. Signed-off-by:
-
Marcin Nowakowski authored
SMP_DUMP has been added as a new IPI signal when kexec support was added for Cavium Octeon CPUs ('commit 7aa1c8f4 ("MIPS: kdump: Add support")'. However, the new signal doesn't appear to ever have a proper handler added (octeon_message_functions[] array has an empty handler for it), and generic IPI handlers now trigger a BUG() on unhandled signal. As the method is unused remove it completely and replace its only invocation with a smp_call_function(). [ralf@linux-mips.org: Renumber SMP_ASK_C0COUNT to avoid numbering gaps.] Signed-off-by: -
Matt Redfearn authored
arch_mmap_rnd() uses hard-coded limits of 16MB for the randomisation of mmap within 32bit processes and 256MB in 64bit processes. Since v4.4 other arches support tuning this value in /proc/sys/vm/mmap_rnd_bits. Add support for this to MIPS. Set the minimum(default) number of bits randomisation for 32bit to 8 - which with 4k pagesize is unchanged from the current 16MB total randomness. The minimum(default) for 64bit is 12bits, again with 4k pagesize this is the same as the current 256MB. This patch is necessary for MIPS32 to pass the Android CTS tests, with the number of random bits set to 15. Signed-off-by:
Matt Redfearn <matt.redfearn@imgtec.com> Reviewed-by:
Kees Cook <keescook@chromium.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Daniel Cashman <dcashman@android.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: linux-mips@linux-mips.org Cc: kernel-hardening@lists.openwall.com Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14617/Signed-off-by:
-
Hauke Mehrtens authored
This activates the following functionalities: * SMP support (used on xRX200) * PCI support * NAND driver * PHY driver * UART * Watchdog * USB 2.0 controller These driver are driving different IP cores found on the supported SoCs. Signed-off-by:
Hauke Mehrtens <hauke@hauke-m.de> Acked-by:
John Crispin <john@phrozen.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14628/Signed-off-by:
-
Hauke Mehrtens authored
Just generate a configuration based on this default configuration and store it again. This removed some old configuration options. Signed-off-by:
-
Tobias Wolf authored
An empty __dtb_start to __dtb_end section might result in initial_boot_params being null for arch/mips/ralink. This showed that the boot process hangs indefinitely in of_scan_flat_dt(). Signed-off-by:
Tobias Wolf <dev-NTEO@vplace.de> Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14605/Signed-off-by:
-
Tobias Wolf authored
This patch adds fw_passed_dtb to arch/mips/ralink to support CONFIG_MIPS_RAW_APPENDED_DTB. Furthermore it adds a check that __dtb_start is not the same address as __dtb_end. Signed-off-by:
-
Yang Ling authored
The patch adds watchdog support for Loongson1 board. Signed-off-by:
Yang Ling <gnaygnil@gmail.com> Cc: keguang.zhang@gmail.com Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14644/Signed-off-by:
-
Yang Ling authored
Move the RTC-related macros to regs-rtc.h. Signed-off-by:
-
Paul Burton authored
The RESTORE_ALL_AND_RET macro is never used. Remove the dead code. Signed-off-by:
Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14411/Signed-off-by:
-
Paul Burton authored
There's no reason for the pre-r6 instruction emulation code to be limited to uniprocessor kernels. We already emulate atomic memory access instructions in a way that works for SMP systems, and nothing else should be affected. Remove the artificial limitation, allowing pre-r6 instruction emulation to be used with SMP kernels. Signed-off-by:
-
Paul Burton authored
Commit 7c151d3d ("MIPS: Make use of the ERETNC instruction on MIPS R6") began clearing LLBit during context switches, but did so on all systems where it is writable for unclear reasons & did so from a macro with "software_ll_bit" in its name, which is intended to operate on the ll_bit variable used by ll/sc emulation for old CPUs. We do now need to clear LLBit on MIPSr6 systems where we'll use eretnc to return to userland, but we don't need to do so on MIPSr5 systems with a writable LLBit. Move the clear to its own appropriately named macro, do it only for MIPSr6 systems & comment about why. Signed-off-by:
-
Paul Burton authored
The r2_emul_return field in struct thread_info was used in order to take an alternate codepath when returning to userland, which (besides not implementing certain features) effectively used the eretnc instruction in place of eret. The difference is that eretnc doesn't clear LLBit, and therefore doesn't cause a linked load & store sequence to fail due to emulation like eret would. The reason eret would usually be used to clear LLBit is so that after context switching we ensure that a load performed by one task doesn't influence another task. However commit 7c151d3d ("MIPS: Make use of the ERETNC instruction on MIPS R6") which introduced the r2_emul_return field and conditional use of eretnc also for some reason began explicitly clearing LLBit during context switches - despite retaining the use of eret for everything but returns from the pre-r6 instruction emulation code. As LLBit is cleared upon context switches anyway, simplify this by using eretnc unconditionally for MIPSr6 kernels. This allows us to remove the 4 byte r2_emul_return boolean from struct thread_info, simplify the return to user code in entry.S and avoid the overhead of tracking & checking state which we don't need. Signed-off-by:
-
Rahul Bedarkar authored
Add support for Imagination Technologies' Marduk board which is based on Pistachio SoC. It is also known as Creator Ci40. Marduk is legacy name and will be there for decades. Documentation for this board can be found on https://docs.creatordev.io/ci40/ This patch adds initial support for board with following peripherals: * PWM based heartbeat LED * GPIO based buttons * SPI NOR flash on SPI1 * UART0 and UART1 * SD card * Ethernet * USB * PWM * ADC * I2C Signed-off-by:
Rahul Bedarkar <rahul.bedarkar@imgtec.com> Acked-by:
Rob Herring <robh@kernel.org> Acked-by:
James Hartley <james.hartley@imgtec.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14394/Signed-off-by:
-
Rahul Bedarkar authored
Add support for the base Device Tree for Imagination Technologies' Pistachio SoC. This commit supports the following peripherals: * Clocks * Pinctrl and GPIO * UART * SPI * I2C * PWM * ADC * Watchdog * Ethernet * MMC * DMA engine * Crypto * I2S * SPDIF * Internal DAC * Timer * USB * IR * Interrupt Controller Signed-off-by:
-
Paul Burton authored
On systems with CM3, we must ensure that the L1 & L2 ECC enables are set to the same value. This is presumed by the hardware & cache corruption can occur when it is not the case. Support enabling & disabling the L2 ECC checking on CM3 systems where this is controlled via a GCR, and ensure that it matches the state of L1 ECC checking. Remove I6400 from the switch statement it will no longer hit, and which was incorrect since the L2 ECC enable bit isn't in the CP0 ErrCtl register. Signed-off-by:
-
Leonid Yegoshin authored
MIPS instructions MULTU, MADDU and MSUBU emulation requires registers HI/LO to be converted to signed 32bits before 64bit sign extension on MIPS64. Bug was found on running MIPS32 R2 test application on MIPS64 R6 kernel. Fixes: b0a668fb ("MIPS: kernel: mips-r2-to-r6-emul: Add R2 emulator for MIPS R6") Signed-off-by:
Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Reported-by: Nikola.Veljkovic@imgtec.com Cc: paul.burton@imgtec.com Cc: yamada.masahiro@socionext.com Cc: akpm@linux-foundation.org Cc: andrea.gelmini@gelma.net Cc: macro@imgtec.com Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14043/Signed-off-by:
-
Kelvin Cheung authored
This patch changes DEFAULT_MEMSIZE to 64MB which is the memory size of latest EVB. Signed-off-by:
Kelvin Cheung <keguang.zhang@gmail.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13856/Signed-off-by:
-
Kelvin Cheung authored
This patch removes ARCH_WANT_OPTIONAL_GPIOLIB due to upstream changes. Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Cc: Yang Ling <gnaygnil@gmail.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13855/Signed-off-by:
-
Florian Fainelli authored
While we properly disabled the per-CPU timer interrupt, we also need to make sure that all interrupts that can possibly have this CPU in their smp_affinity mask also have a chance to see this interrupt migrated to a CPU not being taken offline. [ralf@linux-mips.org: Fix merge conflict.] Fixes: 230b6ff5 ("MIPS: BMIPS: Mask off timer IRQs when hot-unplugging a CPU") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Cc: cernekee@gmail.com Cc: jaedon.shin@gmail.com Cc: justinpopo6@gmail.com Cc: tglx@linutronix.de Cc: marc.zyngier@arm.com Cc: jason@lakedaemon.net Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14488/Signed-off-by:
-
Zubair Lutfullah Kakakhel authored
Update defconfig to enable emaclite, i2c and temp sensor on the xilfpga platform Signed-off-by:
Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14595/Signed-off-by:
-
Zubair Lutfullah Kakakhel authored
The xilfpga platform has a Xilinx AXI emaclite block. Add the DT node to use it. Signed-off-by:
-
Zubair Lutfullah Kakakhel authored
The xilfpga platform has an AXI I2C Bus master with a temperature sensor connected to it. Add the device tree node to use them. Signed-off-by:
-
Zubair Lutfullah Kakakhel authored
Update the DT node with the UART irq Signed-off-by:
-
Zubair Lutfullah Kakakhel authored
IRQs from peripherals such as i2c/uart/ethernet come via the AXI Interrupt controller. Select it in Kconfig for xilfpga and add the DT node Signed-off-by:
-
Zubair Lutfullah Kakakhel authored
This prepares the code to use the Xilinx Interrupt Controller driver in drivers/irqchip/irq-xilinx-intc.c Signed-off-by:
-
Christophe JAILLET authored
'clk_register_fixed_rate()' returns an error pointer in case of error, not NULL. So test it with IS_ERR. Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by:
Aban Bedel <albeu@free.fr> Cc: antonynpavlov@gmail.com Cc: hackpascal@gmail.com Cc: amitoj1606@gmail.com Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: kernel-janitors@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14464/Signed-off-by:
-
Matt Redfearn authored
If there is no online CPU within a core which could receive the IPI to start another VP in that core, a BUG() is triggered. Instead print a warning and gracefully handle the failure such that the system remains usable, albeit without the requested secondary CPU. Signed-off-by:
-
Matt Redfearn authored
The previous commit made cpu_callin_map redundant, since it is no longer used to signal secondary CPUs starting, or going offline. Remove it now. Signed-off-by:
-
Matt Redfearn authored
If a secondary CPU failed to start, for any reason, the CPU requesting the secondary to start would get stuck in the loop waiting for the secondary to be present in the cpu_callin_map. Rather than that, use a completion event to signal that the secondary CPU has started and is waiting to synchronise counters. Since the CPU presence will no longer be marked in cpu_callin_map, remove the redundant test from arch_cpu_idle_dead(). Signed-off-by:
-
Paul Burton authored
Code in arch/mips/netlogic/common/irq.c which handles the XLP PIC fails to build in XLR configurations due to cpu_is_xlp9xx not being defined, leading to the following build failure: arch/mips/netlogic/common/irq.c: In function ‘xlp_of_pic_init’: arch/mips/netlogic/common/irq.c:298:2: error: implicit declaration of function ‘cpu_is_xlp9xx’ [-Werror=implicit-function-declaration] if (cpu_is_xlp9xx()) { ^ Although the code was conditional upon CONFIG_OF which is indirectly selected by CONFIG_NLM_XLP_BOARD but not CONFIG_NLM_XLR_BOARD, the failing XLR with CONFIG_OF configuration can be configured manually or by randconfig. Fix the build failure by making the affected XLP PIC code conditional upon CONFIG_CPU_XLP which is used to guard the inclusion of asm/netlogic/xlp-hal/xlp.h that provides the required cpu_is_xlp9xx function. [ralf@linux-mips.org: Fixed up as per Jayachandran's suggestion.] Signed-off-by: -
Paul Burton authored
We have a HIGHMEM_DEBUG macro defined in asm/highmem.h with a comment stating that it should be removed for production, and no users... Kill it. Signed-off-by:
-
Matt Redfearn authored
When relocatable support for MIPS was merged, there was no support for an architecture to add a postlink step for vmlinux. This meant that only invoking a target within the boot directory, such as uImage, caused the relocations to be inserted into vmlinux. Building just the vmlinux target would result in a relocatable kernel with no relocation information present. Commit fbe6e37d ("kbuild: add arch specific post-link Makefile") recified this situation, so MIPS can now define a postlink step to add relocation information into vmlinux, and remove the additional steps tacked onto boot targets. Signed-off-by:
Steven J. Hill <steven.hill@cavium.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14554/Signed-off-by:
-
Paul Burton authored
is_jump_ins() checks for plain jump ("j") instructions since commit e7438c4b ("MIPS: Fix sibling call handling in get_frame_info") but that commit didn't make the same change to the microMIPS code, leaving it inconsistent with the MIPS32/MIPS64 code. Handle the microMIPS encoding of the jump instruction too such that it behaves consistently. Signed-off-by: -
Paul Burton authored
get_frame_info() calculates the offset of the return address within a stack frame simply by dividing a the bottom 16 bits of the instruction, treated as a signed integer, by the size of a long. Whilst this works for MIPS32 & MIPS64 ISAs where the sw or sd instructions are used, it's incorrect for microMIPS where encodings differ. The result is that we typically completely fail to unwind the stack on microMIPS. Fix this by adjusting is_ra_save_ins() to calculate the return address offset, and take into account the various different encodings there in the same place as we consider whether an instruction is storing the ra/$31 register. With this we are now able to unwind the stack for kernels targetting the microMIPS ISA, for example we can produce: Call Trace: [<80109e1f>] show_stack+0x63/0x7c [<8011ea17>] __warn+0x9b/0xac [<8011ea45>] warn_slowpath_fmt+0x1d/0x20 [<8013fe53>] register_console+0x43/0x314 [<8067c58d>] of_setup_earlycon+0x1dd/0x1ec [<8067f63f>] early_init_dt_scan_chosen_stdout+0xe7/0xf8 [<8066c115>] do_early_param+0x75/0xac [<801302f9>] parse_args+0x1dd/0x308 [<8066c459>] parse_early_options+0x25/0x28 [<8066c48b>] parse_early_param+0x2f/0x38 [<8066e8cf>] setup_arch+0x113/0x488 [<8066c4f3>] start_kernel+0x57/0x328 ---[ end trace 0000000000000000 ]--- Whereas previously we only produced: Call Trace: [<80109e1f>] show_stack+0x63/0x7c ---[ end trace 0000000000000000 ]--- Signed-off-by:
-
