- 13 Jan, 2016 4 commits
-
-
Tvrtko Ursulin authored
Identically to vfuncs interrupt mask initialization can also be compacted for more readable code. Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1452619956-27014-2-git-send-email-tvrtko.ursulin@linux.intel.com
-
Tvrtko Ursulin authored
Majority of them was duplicated code and only render ring currently overrides some of them. We can save some lines of code and also take away the confusion on why bsd2 did not do the seqno coherency workaround. (VCS2 ring does not exist on platforms where workaround is needed but that was not documented in the code.) Signed-off-by:
-
Tvrtko Ursulin authored
Tidy quite long interrupt service routine by factoring out the display part. This simplifies the exit path a little bit, makes the code a bit more readable, and potentialy makes code reuse in the future easier. Signed-off-by:
-
Tvrtko Ursulin authored
One bugfix and a few tidy-ups: * Pipe fault logging was broken on Gen9+. * Removed some unnecessary local variables. * Removed unnecessary initializers. * Decreased pipe iir block indentation level. * Grouped variable initialization close to use sites. Signed-off-by:
Chris Wilson <chris@cris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1452614647-13973-1-git-send-email-tvrtko.ursulin@linux.intel.com
-
- 12 Jan, 2016 17 commits
-
-
Michel Thierry authored
Kernel and userspace are able to handle 4GB (1<<32) address space range, but "A32 Stateless Model" is not. According to documentation, A32 accesses are based on General State Base Address and bound checking is in place. Because size field (instruction State Base Address) limitation, it is not possible to address full 4GB memory region. A32 Stateless Model is used by some libraries and without this patch, the last page of 4GB address space is not accessible in 32bit processes. Reported-by:
Artur Harasimiuk <artur.harasimiuk@intel.com> Signed-off-by:
Michel Thierry <michel.thierry@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1452512367-23614-1-git-send-email-michel.thierry@intel.com Cc: drm-intel-fixes@lists.freedesktop.org Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
Matt Roper authored
sanitize_watermarks() does not properly handle errors returned by drm_atomic_helper_duplicate_state(). Make failures drop locks before returning. We also change the lock of connection_mutex to a drm_modeset_lock_all_ctx() to make sure any EDEADLK's are handled earlier. v2: Change call to lock connetion_mutex with a call to drm_modeset_lock_all_ctx(). This ensures that any lock contention is handled earlier and drm_atomic_helper_duplicate_state() won't return EDEADLK. (Maarten) v3: Drop locks properly in more error paths. (Maarten) Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by:Matt Roper <matthew.d.roper@intel.com> Reviewed-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1452611617-32144-1-git-send-email-matthew.d.roper@intel.com
-
Ville Syrjälä authored
commit 10afa0b6 ("drm/i915: Reject >9 ddi translation entried if port != A/E on SKL") added sanity checks to make sure we don't end up with too many ddi translation values for eDP ports, but it actually failed to check if the port is eDP. We still look up the edp translations for non-eDP ports, but don't use them, so we shouldn't be complaining about them either. Fixes: 10afa0b6 ("drm/i915: Reject >9 ddi translation entried if port != A/E on SKL") Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1452612496-9201-1-git-send-email-ville.syrjala@linux.intel.comReviewed-by:
-
Ville Syrjälä authored
MI_BATCH_BUFFER is nasty since it requires that userspace pass in the correct batch length. Let's switch to using MI_BATCH_BUFFER_START instead (like we do on other platforms). Then we don't have to specify the batch length at all, and the CS will instead execute until it sees the MI_BATCH_BUFFER_END. We still need the batch length since we do the CS TLB workaround and copy the batch into the permanently pinned scratch object and execute it from there. But for this we can simply use the batch object length when the user hasn't specified the actual batch length. So specifying the batch length becomes just a way to optimize the batch copy a little bit. We lost batch_len from a bunch of igts (including the quiesce batch) so without this igt is utterly broken on 830/845. Also some igts such as gem_cpu_reloc never specified the batch_len and so didn't work. With MI_BATCH_BUFFER_START we don't have to fix up igt every time someone forgets that 830/845 exist. Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
Ville Syrjälä authored
My 830 has VBT version 105 with child device size of 22 bytes. Let's assume that's correct and adjust our expectations. Signed-off-by:
Jani Nikula <jani.nikula@intel.com>
-
Ville Syrjälä authored
My 85x has VBT version 108 which has a child dev size of 27 bytes. Let's allow that without printing an error. We still want to reject the actual parsin since for that we need the child device size to be at least 33 bytes. So we should still check for that, but let's make it print a debug message only instead of an error. While at it, toss in a BUILD_BUG_ON() to verify our struct old_child_dev_config is in fact 33 bytes. Signed-off-by:
-
Ville Syrjälä authored
We use the vblank timestamps to generate the vblank frame counter value on gen2. That means we need the pipe scanout position to be accurate when we call drm_crtc_vblank_on(), otherwise the frame counter guesstimate may jump when the pipe actually start. What I observed on my 85x is that the DSL initially reads 0, and when the pipe actually starts DSL jumps to vblank_start. On gen2 DSL==0 means actually vtotal-1 (see update_scanline_offset()), so if we initially get vtotal-1, and then very quickly vblank_start (or thereabouts), the scanout position will appear to jump backwards by approximately one vblank length. Which means the frame counter guesstimate will also jump backwards. That's no good, so let's make sure the pipe has started before we call drm_crtc_vblank_on(). Signed-off-by:
-
Ville Syrjälä authored
Restore the lost phys status page cleanup. Fixes the following splat with DMA_API_DEBUG=y: WARNING: CPU: 0 PID: 21615 at ../lib/dma-debug.c:974 dma_debug_device_change+0x190/0x1f0() pci 0000:00:02.0: DMA-API: device driver has pending DMA allocations while released from device [count=1] One of leaked entries details: [device address=0x0000000023163000] [size=4096 bytes] [mapped with DMA_BIDIRECTIONAL] [mapped as coherent] Modules linked in: i915(-) i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm sha256_generic hmac drbg ctr ccm sch_fq_codel binfmt_misc joydev mousedev arc4 ath5k iTCO_wdt mac80211 smsc_ircc2 ath snd_intel8x0m snd_intel8x0 snd_ac97_codec ac97_bus psmouse snd_pcm input_leds i2c_i801 pcspkr snd_timer cfg80211 snd soundcore i2c_core ehci_pci firewire_ohci ehci_hcd firewire_core lpc_ich 8139too rfkill crc_itu_t mfd_core mii usbcore rng_core intel_agp intel_gtt usb_common agpgart irda crc_ccitt fujitsu_laptop led_class parport_pc video parport evdev backlight CPU: 0 PID: 21615 Comm: rmmod Tainted: G U 4.4.0-rc4-mgm-ovl+ #4 Hardware name: FUJITSU SIEMENS LIFEBOOK S6120/FJNB16C, BIOS Version 1.26 05/10/2004 e31a3de0 e31a3de0 e31a3d9c c128d4bd e31a3dd0 c1045a0c c15e00c4 e31a3dfc 0000546f c15dfad2 000003ce c12b3740 000003ce c12b3740 00000000 00000001 f61fb8a0 e31a3de8 c1045a83 00000009 e31a3de0 c15e00c4 e31a3dfc e31a3e4c Call Trace: [<c128d4bd>] dump_stack+0x16/0x19 [<c1045a0c>] warn_slowpath_common+0x8c/0xd0 [<c12b3740>] ? dma_debug_device_change+0x190/0x1f0 [<c12b3740>] ? dma_debug_device_change+0x190/0x1f0 [<c1045a83>] warn_slowpath_fmt+0x33/0x40 [<c12b3740>] dma_debug_device_change+0x190/0x1f0 [<c1065499>] notifier_call_chain+0x59/0x70 [<c10655af>] __blocking_notifier_call_chain+0x3f/0x80 [<c106560f>] blocking_notifier_call_chain+0x1f/0x30 [<c134cfb3>] __device_release_driver+0xc3/0xf0 [<c134d0d7>] driver_detach+0x97/0xa0 [<c134c440>] bus_remove_driver+0x40/0x90 [<c134db18>] driver_unregister+0x28/0x60 [<c1079e8c>] ? trace_hardirqs_on_caller+0x12c/0x1d0 [<c12c0618>] pci_unregister_driver+0x18/0x80 [<f83e96e7>] drm_pci_exit+0x87/0xb0 [drm] [<f8b3be2d>] i915_exit+0x1b/0x1ee [i915] [<c10b999c>] SyS_delete_module+0x14c/0x210 [<c1079e8c>] ? trace_hardirqs_on_caller+0x12c/0x1d0 [<c115a9bd>] ? ____fput+0xd/0x10 [<c1002014>] do_fast_syscall_32+0xa4/0x450 [<c149f6fa>] sysenter_past_esp+0x3b/0x5d ---[ end trace c2ecbc77760f10a0 ]--- Mapped at: [<c12b3183>] debug_dma_alloc_coherent+0x33/0x90 [<f83e989c>] drm_pci_alloc+0x18c/0x1e0 [drm] [<f8acd59f>] intel_init_ring_buffer+0x2af/0x490 [i915] [<f8acd8b0>] intel_init_render_ring_buffer+0x130/0x750 [i915] [<f8aaea4e>] i915_gem_init_rings+0x1e/0x110 [i915] v2: s/BUG_ON/WARN_ON/ since dim doens't like the former anymore Cc: Chris Wilson <chris@chris-wilson.co.uk> Fixes: 5c6c6003 ("drm/i915: Remove DRI1 ring accessors and API") Signed-off-by: -
Ville Syrjälä authored
Move the ddi buffer translation programming to occur from the encoder .pre_enable() hook, for just the ddi port we are enabling. Previously we used to reprogram the translations for all ddi ports during init and during power well enabling. v2: s/intel_prepare_ddi_buffers/intel_prepare_ddi_buffer/ (Daniel) Resolve conflicts due to dev_priv->atomic_cdclk_freq Signed-off-by: -
Ville Syrjälä authored
Only DDI A and E support 10 translation entries in DP mode. For the other ports the tenth entry is reserved for HDMI. Signed-off-by:
-
Ville Syrjälä authored
Make the ddi buffer programming code a bit more neat by passing around dev_priv instead of dev. v2: Resolve conflicts due to KBL Signed-off-by: -
Ville Syrjälä authored
skl_get_buf_trans_edp() effectively contains another copy of skl_get_buf_trans_dp(). Remove the duplication and just call skl_get_buf_trans_dp() from skl_get_buf_trans_edp(). v2: Resolve conflicts due to KBL Signed-off-by: -
Ville Syrjälä authored
skl_get_buf_trans_*() don't need the 'ddi_translations' local variable since all they with is assign and return. Just return the right thing directly and get rid of the local variable. v2: Resolve conflicts due to KBL Signed-off-by: -
Ville Syrjälä authored
Rather than having open coded checks for the DDI A/E configuration, just store the max supported lane count in intel_digital_port. We had an open coded check for DDI A, but not for DDI E. So we may have been vilating the DDI E max lane count. Signed-off-by:
-
Ville Syrjälä authored
DDI A and E share some of the lanes, so check that we have enough lanes for the purpose we need before registering the encoders. Signed-off-by:
-
Ville Syrjälä authored
We're supposed to pass the primary DP encoder to intel_ddi_clk_select(), not the fake MST encoder. Do so. There's no real bug here though, since intel_ddi_clk_select() only checks if the encoder type is EDP (which it isn't for either the primary DP encoder or the fake MST encoder), and it gets the DDI port via intel_ddi_get_encoder_port() (which knows how to do the fake->primary->port dance itself). Fixes: e404ba8 ("drm/i915: Setup DDI clk for MST on SKL") Signed-off-by: -
Tvrtko Ursulin authored
Same effect for slightly less source code and resulting binary. Signed-off-by:
-
- 11 Jan, 2016 11 commits
-
-
Jani Nikula authored
Reviewed-by:
-
Jani Nikula authored
Make it a bit tidier and safer. Reviewed-by:
-
Jani Nikula authored
The sequence block has sizes of elements after the operation byte since sequence block v3. Use it to skip elements we don't support yet. v2: remove redundant exec_elem[operation_byte] check (Daniel) Reviewed-by:
-
Jani Nikula authored
The changes since the sequence block v2 are: * The whole MIPI bios data block has a separate 32-bit size field since v3, stored after the version. This facilitates big sequences. * The size of the panel specific sequence blocks has grown to 32 bits. This facilitates big sequences. * The elements within sequences now have an 8-bit size field following the operation byte. This facilitates skipping unknown new operation bytes, i.e. forward compatibility. v2 (of the patch): use DRM_ERROR for unknown operation byte v3 (of the patch): even more bounds checking (Ville) Reviewed-by:
-
Jani Nikula authored
New sequences, new operations within sequences. Reviewed-by:
-
Jani Nikula authored
Don't choke on unknown elements when we do know how to skip them. Reviewed-by:
-
Jani Nikula authored
Properly parse the new sequences added in MIPI sequence block v2. Reviewed-by:
-
Jani Nikula authored
Add parsing of the i2c element, defined in MIPI sequence block v2. Drop the status operation byte while at it, that does not exist. Reviewed-by:
-
Mika Kuoppala authored
If we go into suspend with unclaimed access detected, it would be nice to catch that access on a next suspend path. So instead of just notifying about it, arm the unclaimed mmio checks on suspend side. We want to keep the asymmetry on resume, as if it was on resume path, it was not driver that is responsible so no point in arming mmio debugs. Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Mika Kuoppala <mika.kuoppala@intel.com> Reviewed-by:
-
Mika Kuoppala authored
With commit 8ac3e1bb ("drm/i915: Add non claimed mmio checking for vlv/chv") we now have chv/vlv support in place for detecting unclaimed access. Also the perf hit of extra mmio read is now only suffered if mmio_debug is set. This allows us to stuff the macro for unclaimed reg detection inside a generic gen6 register access, as now all gens using these macros uses also unclaimed debugs, the one exception being snb. We gain more clean and generic macros and only downside is that snb will suffer one branch perf hit without upside. Note that the hsw write path debug register check now happens before fifo check, but this should not make any real difference. As vlv/chv use the generic gen6 access macros, the consequence is that they gain the mmio_debug feature. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
Maarten Lankhorst authored
This fixes a spurious warning from an integer overflow on 64-bits systems. The function may return MAX_SCHEDULE_TIMEOUT which gets truncated to -1. Explicitly handling this by casting to lret fixes it. Signed-off-by:
Joseph Yasi <joe.yasi@gmail.com> Tested-by:
Andreas Reis <andreas.reis@gmail.com> Reviewed-by:
-
- 10 Jan, 2016 1 commit
-
-
Daniel Vetter authored
Signed-off-by:
-
- 08 Jan, 2016 7 commits
-
-
Boyer, Wayne authored
Extend the same reasoning as in the patch listed below. It's not an error for the workaround list to be empty if no workarounds are needed. commit 02235808 Author: Francisco Jerez <currojerez@riseup.net> Date: Wed Oct 7 14:44:01 2015 +0300 drm/i915: Don't warn if the workaround list is empty. Signed-off-by:Wayne Boyer <wayne.boyer@intel.com> Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1452129330-3484-2-git-send-email-rodrigo.vivi@intel.com
-
Rodrigo Vivi authored
When adding IS_KABYLAKE definition I didn't included the DC states related because I was planing to include them with the patch that fixes DMC firmware loading, but I forgot them. Meanwhile this runtime pm code changed a lot for Skylake. Well, I didn't expect that this would crash the machine and I just noticed now that Sarah warned me our driver wasn't working. Thanks Sarah. Michel had found the main error first and his fix had better details on the history and got merged already: commit 16fbc291 Author: Michel Thierry <michel.thierry@intel.com> Date: Wed Jan 6 12:08:36 2016 +0000 drm/i915/kbl: Enable PW1 and Misc I/O power wells This one is a follow-up adding the other remaining missing pieces. v2: Rebased on top of Michel's patch as explained above. Cc: Sarah Sharp <sarah.a.sharp@intel.com> Signed-off-by:
-
Jani Nikula authored
The dsi_rr_formula() function has been unused for almost two years, since commit 44d4c6ee Author: Shobhit Kumar <shobhit.kumar@intel.com> Date: Tue Dec 10 12:14:56 2013 +0530 drm/i915: Compute dsi_clk from pixel clock citing the reason as pixel clock based calculation being recommended in the MIPI host controller documentation. Remove the dead code, we can always bring it back if it's needed. Reviewed-by:
-
Jani Nikula authored
Hide away the platform differences in intel_dsi_get_pckl() within intel_dsi_pll.c. No functional changes. Reviewed-by:
-
Mika Kuoppala authored
Imre mentioned that chv might also have capability to track unclaimed mmio accesses. Ville added that both chv and vlv has this capability and he had already made this way back [1]. Mimic what Ville's patch does but adapt on top of less frequent mmio accesses by omitting checking always on reg writes. This patch is untested as of now. v2: overflow handling and posting omitted (Ville) References: [1] http://lists.freedesktop.org/archives/intel-gfx/2013-May/027599.html Cc: Imre Deak <imre.deak@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
Mika Kuoppala authored
Remove char* assignments and add branching hint and also constify the parameters. This results in a 35 bytes shorter fast path, so author boldly assumes it helps without doing in-depth assembly analysis. v2: use WARN's branching (Chris), commit name (Joonas) Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
-
Mika Kuoppala authored
We have done unclaimed register access check in normal (mmio_debug=0) mode once per write. This adds probability of finding the exact sequence where we did the bad access, but also adds burden to each write. As we have mmio_debug available for more fine grained analysis, give up accuracy of detecting correct spot at the first occurrence by doing the one shot detection and arming of mmio_debug in hangcheck and in modeset. This removes the write path performance burden. v2: Remove gratuitous DRM_DEBUG and return value, comments (Chris) Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Paulo Zanoni <przanoni@gmail.com> Reviewed-by:
-
