Pull module updates from Jessica Yu:
 "Summary of modules changes for the 5.3 merge window:

   - Code fixes and cleanups

   - Fix bug where set_memory_x() wasn't being called when rodata=n

   - Fix bug where -EEXIST was being returned for going modules

   - Allow arches to override module_exit_section()"

* tag 'modules-for-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
  modules: fix compile error if don't have strict module rwx
  ARM: module: recognize unwind exit sections
  module: allow arch overrides for .exit section names
  modules: fix BUG when load module with rodata=n
  kernel/module: Fix mem leak in module_add_modinfo_attrs
  kernel: module: Use struct_size() helper
  kernel/module.c: Only return -EEXIST for modules that have finished loading

Pull tracing updates from Steven Rostedt:
 "The main changes in this release include:

   - Add user space specific memory reading for kprobes

   - Allow kprobes to be executed earlier in boot

  The rest are mostly just various clean ups and small fixes"

* tag 'trace-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (33 commits)
  tracing: Make trace_get_fields() global
  tracing: Let filter_assign_type() detect FILTER_PTR_STRING
  tracing: Pass type into tracing_generic_entry_update()
  ftrace/selftest: Test if set_event/ftrace_pid exists before writing
  ftrace/selftests: Return the skip code when tracing directory not configured in kernel
  tracing/kprobe: Check registered state using kprobe
  tracing/probe: Add trace_event_call accesses APIs
  tracing/probe: Add probe event name and group name accesses APIs
  tracing/probe: Add trace flag access APIs for trace_probe
  tracing/probe: Add trace_event_file access APIs for trace_probe
  tracing/probe: Add trace_event_call register API for trace_probe
  tracing/probe: Add trace_probe init and free functions
  tracing/uprobe: Set print format when parsing command
  tracing/kprobe: Set print format right after parsed command
  kprobes: Fix to init kprobes in subsys_initcall
  tracepoint: Use struct_size() in kmalloc()
  ring-buffer: Remove HAVE_64BIT_ALIGNED_ACCESS
  ftrace: Enable trampoline when rec count returns back to one
  tracing/kprobe: Do not run kprobe boot tests if kprobe_event is on cmdline
  tracing: Make a separate config for trace event self tests
  ...

Pull swiotlb updates from Konrad Rzeszutek Wilk:
 "One compiler fix, and a bug-fix in swiotlb_nr_tbl() and
  swiotlb_max_segment() to check also for no_iotlb_memory"

* 'for-linus-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb:
  swiotlb: fix phys_addr_t overflow warning
  swiotlb: Return consistent SWIOTLB segments/nr_tbl
  swiotlb: Group identical cleanup in swiotlb_cleanup()

Pull xfs cleanups from Darrick Wong:
 "We had a few more lateish cleanup patches come in for 5.3 -- a couple
  of syncups with the userspace libxfs code and a conversion of the XFS
  administrator's guide to ReST format.

  Summary:

   - Bring fs/xfs/libxfs/xfs_trans_inode.c in sync with userspace
     libxfs.

   - Convert the xfs administrator guide to rst and move it into the
     official admin guide under Documentation"

* tag 'xfs-5.3-merge-13' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  Documentation: filesystem: Convert xfs.txt to ReST
  xfs: sync up xfs_trans_inode with userspace
  xfs: move xfs_trans_inode.c to libxfs/

Pull cifs updates from Steve French:
 "Fixes (three for stable) and improvements including much faster
  encryption (SMB3.1.1 GCM)"

* tag '4.3-rc-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6: (27 commits)
  smb3: smbdirect no longer experimental
  cifs: fix crash in smb2_compound_op()/smb2_set_next_command()
  cifs: fix crash in cifs_dfs_do_automount
  cifs: fix parsing of symbolic link error response
  cifs: refactor and clean up arguments in the reparse point parsing
  SMB3: query inode number on open via create context
  smb3: Send netname context during negotiate protocol
  smb3: do not send compression info by default
  smb3: add new mount option to retrieve mode from special ACE
  smb3: Allow query of symlinks stored as reparse points
  cifs: Fix a race condition with cifs_echo_request
  cifs: always add credits back for unsolicited PDUs
  fs: cifs: cifsssmb: Change return type of convert_ace_to_cifs_ace
  add some missing definitions
  cifs: fix typo in debug message with struct field ia_valid
  smb3: minor cleanup of compound_send_recv
  CIFS: Fix module dependency
  cifs: simplify code by removing CONFIG_CIFS_ACL ifdef
  cifs: Fix check for matching with existing mount
  cifs: Properly handle auto disabling of serverino option
  ...

Pull ceph updates from Ilya Dryomov:
 "Lots of exciting things this time!

   - support for rbd object-map and fast-diff features (myself). This
     will speed up reads, discards and things like snap diffs on sparse
     images.

   - ceph.snap.btime vxattr to expose snapshot creation time (David
     Disseldorp). This will be used to integrate with "Restore Previous
     Versions" feature added in Windows 7 for folks who reexport ceph
     through SMB.

   - security xattrs for ceph (Zheng Yan). Only selinux is supported for
     now due to the limitations of ->dentry_init_security().

   - support for MSG_ADDR2, FS_BTIME and FS_CHANGE_ATTR features (Jeff
     Layton). This is actually a single feature bit which was missing
     because of the filesystem pieces. With this in, the kernel client
     will finally be reported as "luminous" by "ceph features" -- it is
     still being reported as "jewel" even though all required Luminous
     features were implemented in 4.13.

   - stop NULL-terminating ceph vxattrs (Jeff Layton). The convention
     with xattrs is to not terminate and this was causing
     inconsistencies with ceph-fuse.

   - change filesystem time granularity from 1 us to 1 ns, again fixing
     an inconsistency with ceph-fuse (Luis Henriques).

  On top of this there are some additional dentry name handling and cap
  flushing fixes from Zheng. Finally, Jeff is formally taking over for
  Zheng as the filesystem maintainer"

* tag 'ceph-for-5.3-rc1' of git://github.com/ceph/ceph-client: (71 commits)
  ceph: fix end offset in truncate_inode_pages_range call
  ceph: use generic_delete_inode() for ->drop_inode
  ceph: use ceph_evict_inode to cleanup inode's resource
  ceph: initialize superblock s_time_gran to 1
  MAINTAINERS: take over for Zheng as CephFS kernel client maintainer
  rbd: setallochint only if object doesn't exist
  rbd: support for object-map and fast-diff
  rbd: call rbd_dev_mapping_set() from rbd_dev_image_probe()
  libceph: export osd_req_op_data() macro
  libceph: change ceph_osdc_call() to take page vector for response
  libceph: bump CEPH_MSG_MAX_DATA_LEN (again)
  rbd: new exclusive lock wait/wake code
  rbd: quiescing lock should wait for image requests
  rbd: lock should be quiesced on reacquire
  rbd: introduce copyup state machine
  rbd: rename rbd_obj_setup_*() to rbd_obj_init_*()
  rbd: move OSD request allocation into object request state machines
  rbd: factor out __rbd_osd_setup_discard_ops()
  rbd: factor out rbd_osd_setup_copyup()
  rbd: introduce obj_req->osd_reqs list
  ...

Pull dax updates from Dan Williams:
 "The fruits of a bug hunt in the fsdax implementation with Willy and a
  small feature update for device-dax:

   - Fix a hang condition that started triggering after the Xarray
     conversion of fsdax in the v4.20 kernel.

   - Add a 'resource' (root-only physical base address) sysfs attribute
     to device-dax instances to correlate memory-blocks onlined via the
     kmem driver with a given device instance"

* tag 'dax-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  dax: Fix missed wakeup with PMD faults
  device-dax: Add a 'resource' attribute

Pull libnvdimm updates from Dan Williams:
 "Primarily just the virtio_pmem driver:

   - virtio_pmem

     The new virtio_pmem facility introduces a paravirtualized
     persistent memory device that allows a guest VM to use DAX
     mechanisms to access a host-file with host-page-cache. It arranges
     for MAP_SYNC to be disabled and instead triggers a host fsync()
     when a 'write-cache flush' command is sent to the virtual disk
     device.

   - Miscellaneous small fixups"

* tag 'libnvdimm-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  virtio_pmem: fix sparse warning
  xfs: disable map_sync for async flush
  ext4: disable map_sync for async flush
  dax: check synchronous mapping is supported
  dm: enable synchronous dax
  libnvdimm: add dax_dev sync flag
  virtio-pmem: Add virtio pmem driver
  libnvdimm: nd_region flush callback support
  libnvdimm, namespace: Drop uuid_t implementation detail

Pull watchdog updates from Wim Van Sebroeck:

 - add Allwinner H6 watchdog

 - drop warning after registering device patches

 - hpwdt improvements

 - gpio: add support for nowayout option

 - introduce CONFIG_WATCHDOG_OPEN_TIMEOUT

 - convert remaining drivers to use SPDX license identifier

 - Fixes and improvements on several watchdog device drivers

* tag 'linux-watchdog-5.3-rc1' of git://www.linux-watchdog.org/linux-watchdog: (74 commits)
  watchdog: digicolor_wdt: Remove unused variable in dc_wdt_probe
  watchdog: ie6xx_wdt: Use spinlock_t instead of struct spinlock
  watchdog: atmel: atmel-sama5d4-wdt: Disable watchdog on system suspend
  watchdog: convert remaining drivers to use SPDX license identifier
  dt-bindings: watchdog: Rename bindings documentation file
  watchdog: mei_wdt: no need to check return value of debugfs_create functions
  watchdog: bcm_kona_wdt: no need to check return value of debugfs_create functions
  docs: watchdog: Fix build error.
  docs: watchdog: convert docs to ReST and rename to *.rst
  watchdog: make the device time out at open_deadline when open_timeout is used
  watchdog: introduce CONFIG_WATCHDOG_OPEN_TIMEOUT
  watchdog: introduce watchdog.open_timeout commandline parameter
  dt-bindings: watchdog: move i.MX system controller watchdog binding to SCU
  watchdog: imx_sc: Add pretimeout support
  watchdog: renesas_wdt: Add a few cycles delay
  watchdog: gpio: add support for nowayout option
  watchdog: renesas_wdt: Use 'dev' instead of dereferencing it repeatedly
  dt-bindings: watchdog: add Allwinner H6 watchdog
  watchdog: jz4740: Avoid starting watchdog in set_timeout
  watchdog: jz4740: Use register names from <linux/mfd/ingenic-tcu.h>
  ...

Pull sound fixes from Takashi Iwai:
 "A collection of small fixes.

   - The optimization of PM resume with HD-audio HDMI codecs, which
     eventually work around weird issues

   - A correction of Intel Icelake HDMI audio code

   - Quirks for Dell machines with Realtek HD-audio codecs

   - The fix for too long sequencer write stall that was spotted by
     syzkaller

   - A few trivial cleanups reported by coccinelle"

* tag 'sound-fix-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda - Don't resume forcibly i915 HDMI/DP codec
  ALSA: hda/hdmi - Fix i915 reverse port/pin mapping
  ALSA: hda/hdmi - Remove duplicated define
  ALSA: seq: Break too long mutex context in the write loop
  ALSA: hda/realtek: apply ALC891 headset fixup to one Dell machine
  ALSA: rme9652: Unneeded variable: "result".
  ALSA: emu10k1: Remove unneeded variable "change"
  ALSA: au88x0: Remove unneeded variable: "changed"
  ALSA: hda/realtek - Fixed Headphone Mic can't record on Dell platform
  ALSA: ps3: Remove Unneeded variable: "ret"
  ALSA: lx6464es: Remove unneeded variable err

Pull more power management updates from Rafael Wysocki:
 "These modify the Intel RAPL driver to allow it to use an MMIO
  interface to the hardware, make the int340X thermal driver provide
  such an interface for it, add Intel Ice Lake CPU IDs to the RAPL
  driver (these changes depend on the previously merged x86 arch
  changes), update cpufreq to use the PM QoS framework for managing the
  min and max frequency limits, and add update the imx-cpufreq-dt
  cpufreq driver to support i.MX8MN.

  Specifics:

   - Add MMIO interface support to the Intel RAPL power capping driver
     and update the int340X thermal driver to provide a RAPL MMIO
     interface (Zhang Rui, Stephen Rothwell).

   - Add Intel Ice Lake CPU IDs to the RAPL driver (Zhang Rui, Rajneesh
     Bhardwaj).

   - Make cpufreq use the PM QoS framework (instead of notifiers) for
     managing the min and max frequency constraints (Viresh Kumar).

   - Add i.MX8MN support to the imx-cpufreq-dt cpufreq driver (Anson
     Huang)"

* tag 'pm-5.3-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (27 commits)
  cpufreq: Make cpufreq_generic_init() return void
  intel_rapl: need linux/cpuhotplug.h for enum cpuhp_state
  powercap/rapl: Add Ice Lake NNPI support to RAPL driver
  powercap/intel_rapl: add support for ICX-D
  powercap/intel_rapl: add support for ICX
  powercap/intel_rapl: add support for IceLake desktop
  intel_rapl: Fix module autoloading issue
  int340X/processor_thermal_device: add support for MMIO RAPL
  intel_rapl: support two power limits for every RAPL domain
  intel_rapl: support 64 bit register
  intel_rapl: abstract RAPL common code
  intel_rapl: cleanup hardcoded MSR access
  intel_rapl: cleanup some functions
  intel_rapl: abstract register access operations
  intel_rapl: abstract register address
  intel_rapl: introduce struct rapl_if_private
  intel_rapl: introduce intel_rapl.h
  intel_rapl: remove hardcoded register index
  intel_rapl: use reg instead of msr
  cpufreq: imx-cpufreq-dt: Add i.MX8MN support
  ...

Pull more ACPI updates from Rafael Wysocki:
 "These get rid of two clang warnings, add a new quirk mechanism to the
  ACPI backlight driver (and apply it to one machine) and update the
  table load object initialization in ACPICA (this is a replacement for
  a previously reverted ACPICA commit).

  Specifics:

   - Make ACPI table loading work more consistently regardless of the
     exact mechanism used for loading a table (Erik Schmauss).

   - Get rid of two clang warnings (Arnd Bergmann).

   - Add new quirk mechanism to the ACPI backlight driver and use it to
     add a quirk for PB Easynote MZ35 (Hans de Goede)"

* tag 'acpi-5.3-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: video: Add new hw_changes_brightness quirk, set it on PB Easynote MZ35
  ACPI: fix false-positive -Wuninitialized warning
  ACPI: blacklist: fix clang warning for unused DMI table
  ACPICA: Update table load object initialization

Merge floppy ioctl verification fixes from Denis Efremov.

This also marks the floppy driver as orphaned - it turns out that Jiri
no longer has working hardware.

Actual working physical floppy hardware is getting hard to find, and
while Willy was able to test this, I think the driver can be considered
pretty much dead from an actual hardware standpoint.  The hardware that
is still sold seems to be mainly USB-based, which doesn't use this
legacy driver at all.

The old floppy disk controller is still emulated in various VM
environments, so the driver isn't going away, but let's see if anybody
is interested to step up to maintain it.

The lack of hardware also likely means that the ioctl range verification
fixes are probably mostly relevant to anybody using floppies in a
virtual environment.  Which is probably also going away in favor of USB
storage emulation, but who knows.

Will Decon reviewed the patches but I'm not rebasing them just for that,
so I'll add a
Reviewed-by: Will Deacon <will@kernel.org>

here instead.

* floppy:
  MAINTAINERS: mark floppy.c orphaned
  floppy: fix out-of-bounds read in copy_buffer
  floppy: fix invalid pointer dereference in drive_name
  floppy: fix out-of-bounds read in next_valid_format
  floppy: fix div-by-zero in setup_format_params

I volunteered myself to maintain it quite some time ago back when I
fixed the concurrency issues which exhibited itself only with
VM-emulated devices, and at the same time I still had the physical 3.5"
reader to test all the changes.

The reader doesn't work any more though, so I guess it's time to step
down from this super-prestigious role :p and mark floppy.c as Orphaned.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* acpi-misc:
  ACPI: fix false-positive -Wuninitialized warning
  ACPI: blacklist: fix clang warning for unused DMI table

* acpi-video:
  ACPI: video: Add new hw_changes_brightness quirk, set it on PB Easynote MZ35

* pm-cpufreq:
  cpufreq: Make cpufreq_generic_init() return void
  cpufreq: imx-cpufreq-dt: Add i.MX8MN support
  cpufreq: Add QoS requests for userspace constraints
  cpufreq: intel_pstate: Reuse refresh_frequency_limits()
  cpufreq: Register notifiers with the PM QoS framework
  PM / QoS: Add support for MIN/MAX frequency constraints
  PM / QOS: Pass request type to dev_pm_qos_read_value()
  PM / QOS: Rename __dev_pm_qos_read_value() and dev_pm_qos_raw_read_value()
  PM / QOS: Pass request type to dev_pm_qos_{add|remove}_notifier()

This fixes a global out-of-bounds read access in the copy_buffer
function of the floppy driver.

The FDDEFPRM ioctl allows one to set the geometry of a disk.  The sect
and head fields (unsigned int) of the floppy_drive structure are used to
compute the max_sector (int) in the make_raw_rw_request function.  It is
possible to overflow the max_sector.  Next, max_sector is passed to the
copy_buffer function and used in one of the memcpy calls.

An unprivileged user could trigger the bug if the device is accessible,
but requires a floppy disk to be inserted.

The patch adds the check for the .sect * .head multiplication for not
overflowing in the set_geometry function.

The bug was found by syzkaller.
Signed-off-by: Denis Efremov <efremov@ispras.ru>
Tested-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This fixes the invalid pointer dereference in the drive_name function of
the floppy driver.

The native_format field of the struct floppy_drive_params is used as
floppy_type array index in the drive_name function.  Thus, the field
should be checked the same way as the autodetect field.

To trigger the bug, one could use a value out of range and set the drive
parameters with the FDSETDRVPRM ioctl.  Next, FDGETDRVTYP ioctl should
be used to call the drive_name.  A floppy disk is not required to be
inserted.

CAP_SYS_ADMIN is required to call FDSETDRVPRM.

The patch adds the check for a value of the native_format field to be in
the '0 <= x < ARRAY_SIZE(floppy_type)' range of the floppy_type array
indices.

The bug was found by syzkaller.
Signed-off-by: Denis Efremov <efremov@ispras.ru>
Tested-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This fixes a global out-of-bounds read access in the next_valid_format
function of the floppy driver.

The values from autodetect field of the struct floppy_drive_params are
used as indices for the floppy_type array in the next_valid_format
function 'floppy_type[DP->autodetect[probed_format]].sect'.

To trigger the bug, one could use a value out of range and set the drive
parameters with the FDSETDRVPRM ioctl.  A floppy disk is not required to
be inserted.

CAP_SYS_ADMIN is required to call FDSETDRVPRM.

The patch adds the check for values of the autodetect field to be in the
'0 <= x < ARRAY_SIZE(floppy_type)' range of the floppy_type array indices.

The bug was found by syzkaller.
Signed-off-by: Denis Efremov <efremov@ispras.ru>
Tested-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This fixes a divide by zero error in the setup_format_params function of
the floppy driver.

Two consecutive ioctls can trigger the bug: The first one should set the
drive geometry with such .sect and .rate values for the F_SECT_PER_TRACK
to become zero.  Next, the floppy format operation should be called.

A floppy disk is not required to be inserted.  An unprivileged user
could trigger the bug if the device is accessible.

The patch checks F_SECT_PER_TRACK for a non-zero value in the
set_geometry function.  The proper check should involve a reasonable
upper limit for the .sect and .rate fields, but it could change the
UAPI.

The patch also checks F_SECT_PER_TRACK in the setup_format_params, and
cancels the formatting operation in case of zero.

The bug was found by syzkaller.
Signed-off-by: Denis Efremov <efremov@ispras.ru>
Tested-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull another x86 platform driver update from Andy Shevchenko:
 "Provide better naming for ABI, i.e. tell that we have fan boost mode.

  It won't break any ABI, but has to be done now to avoid confusion in
  the future"

* tag 'platform-drivers-x86-v5.3-2' of git://git.infradead.org/linux-platform-drivers-x86:
  platform/x86: asus: Rename "fan mode" to "fan boost mode"

Pull thermal management updates from Zhang Rui:

 - Convert thermal documents to ReST (Mauro Carvalho Chehab)

 - Fix a cyclic depedency in between thermal core and governors (Daniel
   Lezcano)

 - Fix processor_thermal_device driver to re-evaluate power limits after
   resume (Srinivas Pandruvada, Zhang Rui)

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
  drivers: thermal: processor_thermal_device: Fix build warning
  docs: thermal: convert to ReST
  thermal/drivers/core: Use governor table to initialize
  thermal/drivers/core: Add init section table for self-encapsulation
  drivers: thermal: processor_thermal: Read PPCC on resume

Pull GPIO fixes from Linus Walleij:

 - Revert a SPIO GPIO fix that didn't fix anything but instead created
   new problems.

 - Remove the EM GPIO irqdomain in a safe manner.

 - Fix a memory leak in the gpio quirks.

 - Make the DaVinci error path silent on probe deferral.

* tag 'gpio-v5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  Revert "gpio/spi: Fix spi-gpio regression on active high CS"
  gpio: em: remove the gpiochip before removing the irq domain
  gpiolib: of: fix a memory leak in of_gpio_flags_quirks()
  gpio: davinci: silence error prints in case of EPROBE_DEFER

Pull hwspinlock updates from Bjorn Andersson:
 "This contains support for hardware spinlock TI K3 AM65x and J721E
  family of SoCs, support for using hwspinlocks from atomic context and
  better error reporting when dealing with hardware disabled in
  DeviceTree"

* tag 'hwlock-v5.3' of git://github.com/andersson/remoteproc:
  hwspinlock: add the 'in_atomic' API
  hwspinlock: document the hwspinlock 'raw' API
  hwspinlock: stm32: implement the relax() ops
  hwspinlock: ignore disabled device
  hwspinlock/omap: Add a trace during probe
  hwspinlock/omap: Add support for TI K3 SoCs
  dt-bindings: hwlock: Update OMAP binding for TI K3 SoCs

Pull remoteproc updates from Bjorn Andersson:
 "This adds support for the STM32 remoteproc, additional i.MX platforms
  with Cortex M4 remoteprocs and Qualcomm's QCS404 Compute DSP.

  Also initial support for vendor specific resource table entries and
  support for unprocessed Qualcomm firmware files"

* tag 'rproc-v5.3' of git://github.com/andersson/remoteproc:
  remoteproc: stm32: fix building without ARM SMCC
  remoteproc: qcom: q6v5-mss: Fix build error without QCOM_MDT_LOADER
  remoteproc: copy parent dma_pfn_offset for vdev
  remoteproc: qcom: q6v5-mss: Support loading non-split images
  soc: qcom: mdt_loader: Support loading non-split images
  remoteproc: stm32: add an ST stm32_rproc driver
  dt-bindings: remoteproc: add bindings for stm32 remote processor driver
  dt-bindings: stm32: add bindings for ML-AHB interconnect
  remoteproc: Use struct_size() helper
  remoteproc: add vendor resources handling
  remoteproc: imx: Fix typo in "failed"
  remoteproc: imx: Broaden the Kconfig selection logic
  remoteproc,rpmsg: add missing MAINTAINERS file entries
  remoteproc: qcom: qdsp6-adsp: Add support for QCS404 CDSP
  dt-bindings: remoteproc: Rename and amend Hexagon v56 binding

Pull rpmsg updates from Bjorn Andersson:
 "This contains a DT binding update and a change to make the remote
  function of rpmsg_devices optional"

* tag 'rpmsg-v5.3' of git://github.com/andersson/remoteproc:
  rpmsg: core: Make remove handler for rpmsg driver optional.
  dt-bindings: soc: qcom: Add remote-pid binding for GLINK SMEM

Pull virtio, vhost updates from Michael Tsirkin:
 "Fixes, features, performance:

   - new iommu device

   - vhost guest memory access using vmap (just meta-data for now)

   - minor fixes"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  virtio-mmio: add error check for platform_get_irq
  scsi: virtio_scsi: Use struct_size() helper
  iommu/virtio: Add event queue
  iommu/virtio: Add probe request
  iommu: Add virtio-iommu driver
  PCI: OF: Initialize dev->fwnode appropriately
  of: Allow the iommu-map property to omit untranslated devices
  dt-bindings: virtio: Add virtio-pci-iommu node
  dt-bindings: virtio-mmio: Add IOMMU description
  vhost: fix clang build warning
  vhost: access vq metadata through kernel virtual address
  vhost: factor out setting vring addr and num
  vhost: introduce helpers to get the size of metadata area
  vhost: rename vq_iotlb_prefetch() to vq_meta_prefetch()
  vhost: fine grain userspace memory accessors
  vhost: generalize adding used elem

Pull VFIO updates from Alex Williamson:

 - Static symbol cleanup in mdev samples (Kefeng Wang)

 - Use vma help in nvlink code (Peng Hao)

 - Remove unused code in mbochs sample (YueHaibing)

 - Send uevents around mdev registration (Alex Williamson)

* tag 'vfio-v5.3-rc1' of git://github.com/awilliam/linux-vfio:
  mdev: Send uevents around parent device registration
  sample/mdev/mbochs: remove set but not used variable 'mdev_state'
  vfio: vfio_pci_nvlink2: use a vma helper function
  vfio-mdev/samples: make some symbols static

Pull clk updates from Stephen Boyd:
 "This round of clk driver and framework updates is heavy on the driver
  update side. The two main highlights in the core framework are the
  addition of an bulk clk_get API that handles optional clks and an
  extra debugfs file that tells the developer about the current parent
  of a clk.

  The driver updates are dominated by i.MX in the diffstat, but that is
  mostly because that SoC has started converting to the clk_hw style of
  clk registration. The next big update is in the Amlogic meson clk
  driver that gained some support for audio, cpu, and temperature clks
  while fixing some PLL issues. Finally, the biggest thing that stands
  out is the conversion of a large part of the Allwinner sunxi-ng driver
  to the new clk parent scheme that uses less strings and more pointer
  comparisons to match clk parents and children up.

  In general, it looks like we have a lot of little fixes and tweaks
  here and there to clk data along with the normal addition of a handful
  of new drivers and a couple new core framework features.

  Core:
   - Add a 'clk_parent' file in clk debugfs
   - Add a clk_bulk_get_optional() API (with devm too)

  New Drivers:
   - Support gated clk controller on MIPS based BCM63XX SoCs
   - Support SiLabs Si5341 and Si5340 chips
   - Support for CPU clks on Raspberry Pi devices
   - Audsys clock driver for MediaTek MT8516 SoCs

  Updates:
   - Convert a large portion of the Allwinner sunxi-ng driver to new clk parent scheme
   - Small frequency support for SiLabs Si544 chips
   - Slow clk support for AT91 SAM9X60 SoCs
   - Remove dead code in various clk drivers (-Wunused)
   - Support for Marvell 98DX1135 SoCs
   - Get duty cycle of generic pwm clks
   - Improvement in mmc phase calculation and cleanup of some rate defintions
   - Switch i.MX6 and i.MX7 clock drivers to clk_hw based APIs
   - Add GPIO, SNVS and GIC clocks for i.MX8 drivers
   - Mark imx6sx/ul/ull/sll MMDC_P1_IPG and imx8mm DRAM_APB as critical clock
   - Correct imx7ulp nic1_bus_clk and imx8mm audio_pll2_clk clock setting
   - Add clks for new Exynos5422 Dynamic Memory Controller driver
   - Clock definition for Exynos4412 Mali
   - Add CMM (Color Management Module) clocks on Renesas R-Car H3, M3-N, E3, and D3
   - Add TPU (Timer Pulse Unit / PWM) clocks on Renesas RZ/G2M
   - Support for 32 bit clock IDs in TI's sci-clks for J721e SoCs
   - TI clock probing done from DT by default instead of firmware
   - Fix Amlogic Meson mpll fractional part and spread sprectrum issues
   - Add Amlogic meson8 audio clocks
   - Add Amlogic g12a temperature sensors clocks
   - Add Amlogic g12a and g12b cpu clocks
   - Add TPU (Timer Pulse Unit / PWM) clocks on Renesas R-Car H3, M3-W, and M3-N
   - Add CMM (Color Management Module) clocks on Renesas R-Car M3-W
   - Add Clock Domain support on Renesas RZ/N1"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (190 commits)
  clk: consoldiate the __clk_get_hw() declarations
  clk: sprd: Add check for return value of sprd_clk_regmap_init()
  clk: lochnagar: Update DT binding doc to include the primary SPDIF MCLK
  clk: Add Si5341/Si5340 driver
  dt-bindings: clock: Add silabs,si5341
  clk: clk-si544: Implement small frequency change support
  clk: add BCM63XX gated clock controller driver
  devicetree: document the BCM63XX gated clock bindings
  clk: at91: sckc: use dedicated functions to unregister clock
  clk: at91: sckc: improve error path for sama5d4 sck registration
  clk: at91: sckc: remove unnecessary line
  clk: at91: sckc: improve error path for sam9x5 sck register
  clk: at91: sckc: add support to free slow clock osclillator
  clk: at91: sckc: add support to free slow rc oscillator
  clk: at91: sckc: add support to free slow oscillator
  clk: rockchip: export HDMIPHY clock on rk3228
  clk: rockchip: add watchdog pclk on rk3328
  clk: rockchip: add clock id for hdmi_phy special clock on rk3228
  clk: rockchip: add clock id for watchdog pclk on rk3328
  clk: at91: sckc: add support for SAM9X60
  ...

Pull RTC updates from Alexandre Belloni:
 "A quiet cycle this time.

   - ds1307: properly handle oscillator failure flags

   - imx-sc: alarm support

   - pcf2123: alarm support, correct offset handling

   - sun6i: add R40 support

   - simplify getting the adapter of an i2c client"

* tag 'rtc-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (37 commits)
  rtc: wm831x: Add IRQF_ONESHOT flag
  rtc: stm32: remove one condition check in stm32_rtc_set_alarm()
  rtc: pcf2123: Fix build error
  rtc: interface: Change type of 'count' from int to u64
  rtc: pcf8563: Clear event flags and disable interrupts before requesting irq
  rtc: pcf8563: Fix interrupt trigger method
  rtc: pcf2123: fix negative offset rounding
  rtc: pcf2123: add alarm support
  rtc: pcf2123: use %ptR
  rtc: pcf2123: port to regmap
  rtc: pcf2123: remove sysfs register view
  rtc: rx8025: simplify getting the adapter of a client
  rtc: rx8010: simplify getting the adapter of a client
  rtc: rv8803: simplify getting the adapter of a client
  rtc: m41t80: simplify getting the adapter of a client
  rtc: fm3130: simplify getting the adapter of a client
  rtc: tegra: Drop MODULE_ALIAS
  rtc: sun6i: Add R40 compatible
  dt-bindings: rtc: sun6i: Add the R40 RTC compatible
  dt-bindings: rtc: Convert Allwinner A31 RTC to a schema
  ...

Pull dmaengine updates from Vinod Koul:

 - Add support in dmaengine core to do device node checks for DT devices
   and update bunch of drivers to use that and remove open coding from
   drivers

 - New driver/driver support for new hardware, namely:
     - MediaTek UART APDMA
     - Freescale i.mx7ulp edma2
     - Synopsys eDMA IP core version 0
     - Allwinner H6 DMA

 - Updates to axi-dma and support for interleaved cyclic transfers

 - Greg's debugfs return value check removals on drivers

 - Updates to stm32-dma, hsu, dw, pl330, tegra drivers

* tag 'dmaengine-5.3-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (68 commits)
  dmaengine: Revert "dmaengine: fsl-edma: add i.mx7ulp edma2 version support"
  dmaengine: at_xdmac: check for non-empty xfers_list before invoking callback
  Documentation: dmaengine: clean up description of dmatest usage
  dmaengine: tegra210-adma: remove PM_CLK dependency
  dmaengine: fsl-edma: add i.mx7ulp edma2 version support
  dt-bindings: dma: fsl-edma: add new i.mx7ulp-edma
  dmaengine: fsl-edma-common: version check for v2 instead
  dmaengine: fsl-edma-common: move dmamux register to another single function
  dmaengine: fsl-edma: add drvdata for fsl-edma
  dmaengine: Revert "dmaengine: fsl-edma: support little endian for edma driver"
  dmaengine: rcar-dmac: Reject zero-length slave DMA requests
  dmaengine: dw: Enable iDMA 32-bit on Intel Elkhart Lake
  dmaengine: dw-edma: fix semicolon.cocci warnings
  dmaengine: sh: usb-dmac: Use [] to denote a flexible array member
  dmaengine: dmatest: timeout value of -1 should specify infinite wait
  dmaengine: dw: Distinguish ->remove() between DW and iDMA 32-bit
  dmaengine: fsl-edma: support little endian for edma driver
  dmaengine: hsu: Revert "set HSU_CH_MTSR to memory width"
  dmagengine: pl330: add code to get reset property
  dt-bindings: pl330: document the optional resets property
  ...

Pull MIPS updates from Paul Burton:
 "A light batch this time around but significant improvements for
  certain systems:

   - Removal of readq & writeq for MIPS32 kernels where they would
     simply BUG() anyway, allowing drivers or other code that #ifdefs on
     their presence to work properly.

   - Improvements for Ingenic JZ4740 systems, including support for the
     external memory controller & pinmuxing fixes for qi_lb60/NanoNote
     systems.

   - Improvements for Lantiq systems, in particular around SMP & IPIs.

   - DT updates for ralink/MediaTek MT7628a systems to probe & configure
     a bunch more devices.

   - Miscellaneous cleanups & build fixes"

* tag 'mips_5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (30 commits)
  MIPS: fix some more fall through errors in arch/mips
  MIPS: perf events: handle switch statement falling through warnings
  mips/kprobes: Export kprobe_fault_handler()
  MAINTAINERS: Add myself as Ingenic SoCs maintainer
  MIPS: ralink: mt7628a.dtsi: Add watchdog controller DT node
  MIPS: ralink: mt7628a.dtsi: Add SPI controller DT node
  MIPS: ralink: mt7628a.dtsi: Add GPIO controller DT node
  MIPS: ralink: mt7628a.dtsi: Add pinctrl DT properties to the UART nodes
  MIPS: ralink: mt7628a.dtsi: Add pinmux DT node
  MIPS: ralink: mt7628a.dtsi: Add SPDX GPL-2.0 license identifier
  MIPS: lantiq: Add SMP support for lantiq interrupt controller
  MIPS: lantiq: Shorten register names, remove unused macros
  MIPS: lantiq: Fix bitfield masking
  MIPS: lantiq: Remove unused macros
  MIPS: lantiq: Fix attributes of of_device_id structure
  MIPS: lantiq: Change variables to the same type as the source
  MIPS: lantiq: Move macro directly to iomem function
  mips: Remove q-accessors from non-64bit platforms
  FDDI: defza: Include linux/io-64-nonatomic-lo-hi.h
  MIPS: configs: Remove useless UEVENT_HELPER_PATH
  ...

Pull h8300 update from Yoshinori Sato:
 "Remove unused barrier defines"

* tag 'h8300-for-linus-20190617' of git://git.sourceforge.jp/gitroot/uclinux-h8/linux:
  H8300: remove unused barrier defines

Pull SH updates from Yoshinori Sato.

kprobe fix, defconfig updates and a SH Kconfig fix.

* tag 'for-linus-20190617' of git://git.sourceforge.jp/gitroot/uclinux-h8/linux:
  arch/sh: Check for kprobe trap number before trying to handle a kprobe trap
  sh: configs: Remove useless UEVENT_HELPER_PATH
  Fix allyesconfig output.

The Asus WMI spec indicates that the function being controlled here
is called "Fan Boost Mode". The user-facing documentation also calls it
this.

The spec uses the term "fan mode" is used to refer to other things,
including functionality expected to appear on future products.
We missed this before as we are not dealing with the most readable of
specs, and didn't forsee any confusion around shortening the name.

Rename "fan mode" to "fan boost mode" to improve consistency with the
spec and to avoid a future naming conflict.

There is no interface breakage here since this has yet to be included
in an official kernel release. I also updated the kernel version listed
under ABI accordingly.
Signed-off-by: Daniel Drake <drake@endlessm.com>
Acked-by: Yurii Pavlovskyi <yurii.pavlovskyi@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Merge more updates from Andrew Morton:
 "VM:
   - z3fold fixes and enhancements by Henry Burns and Vitaly Wool

   - more accurate reclaimed slab caches calculations by Yafang Shao

   - fix MAP_UNINITIALIZED UAPI symbol to not depend on config, by
     Christoph Hellwig

   - !CONFIG_MMU fixes by Christoph Hellwig

   - new novmcoredd parameter to omit device dumps from vmcore, by
     Kairui Song

   - new test_meminit module for testing heap and pagealloc
     initialization, by Alexander Potapenko

   - ioremap improvements for huge mappings, by Anshuman Khandual

   - generalize kprobe page fault handling, by Anshuman Khandual

   - device-dax hotplug fixes and improvements, by Pavel Tatashin

   - enable synchronous DAX fault on powerpc, by Aneesh Kumar K.V

   - add pte_devmap() support for arm64, by Robin Murphy

   - unify locked_vm accounting with a helper, by Daniel Jordan

   - several misc fixes

  core/lib:
   - new typeof_member() macro including some users, by Alexey Dobriyan

   - make BIT() and GENMASK() available in asm, by Masahiro Yamada

   - changed LIST_POISON2 on x86_64 to 0xdead000000000122 for better
     code generation, by Alexey Dobriyan

   - rbtree code size optimizations, by Michel Lespinasse

   - convert struct pid count to refcount_t, by Joel Fernandes

  get_maintainer.pl:
   - add --no-moderated switch to skip moderated ML's, by Joe Perches

  misc:
   - ptrace PTRACE_GET_SYSCALL_INFO interface

   - coda updates

   - gdb scripts, various"

[ Using merge message suggestion from Vlastimil Babka, with some editing - Linus ]

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (100 commits)
  fs/select.c: use struct_size() in kmalloc()
  mm: add account_locked_vm utility function
  arm64: mm: implement pte_devmap support
  mm: introduce ARCH_HAS_PTE_DEVMAP
  mm: clean up is_device_*_page() definitions
  mm/mmap: move common defines to mman-common.h
  mm: move MAP_SYNC to asm-generic/mman-common.h
  device-dax: "Hotremove" persistent memory that is used like normal RAM
  mm/hotplug: make remove_memory() interface usable
  device-dax: fix memory and resource leak if hotplug fails
  include/linux/lz4.h: fix spelling and copy-paste errors in documentation
  ipc/mqueue.c: only perform resource calculation if user valid
  include/asm-generic/bug.h: fix "cut here" for WARN_ON for __WARN_TAINT architectures
  scripts/gdb: add helpers to find and list devices
  scripts/gdb: add lx-genpd-summary command
  drivers/pps/pps.c: clear offset flags in PPS_SETPARAMS ioctl
  kernel/pid.c: convert struct pid count to refcount_t
  drivers/rapidio/devices/rio_mport_cdev.c: NUL terminate some strings
  select: shift restore_saved_sigmask_unless() into poll_select_copy_remaining()
  select: change do_poll() to return -ERESTARTNOHAND rather than -EINTR
  ...

This patch fixes below sparse warning related to __virtio
type in virtio pmem driver. This is reported by Intel test
bot on linux-next tree.

nd_virtio.c:56:28: warning: incorrect type in assignment
                                (different base types)
nd_virtio.c:56:28:    expected unsigned int [unsigned] [usertype] type
nd_virtio.c:56:28:    got restricted __virtio32
nd_virtio.c:93:59: warning: incorrect type in argument 2
                                (different base types)
nd_virtio.c:93:59:    expected restricted __virtio32 [usertype] val
nd_virtio.c:93:59:    got unsigned int [unsigned] [usertype] ret
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Pankaj Gupta <pagupta@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

RocksDB can hang indefinitely when using a DAX file.  This is due to
a bug in the XArray conversion when handling a PMD fault and finding a
PTE entry.  We use the wrong index in the hash and end up waiting on
the wrong waitqueue.

There's actually no need to wait; if we find a PTE entry while looking
for a PMD entry, we can return immediately as we know we should fall
back to a PTE fault (which may not conflict with the lock held).

We reuse the XA_RETRY_ENTRY to signal a conflicting entry was found.
This value can never be found in an XArray while holding its lock, so
it does not create an ambiguity.

Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/CAPcyv4hwHpX-MkUEqxwdTj7wCCZCN4RV-L4jsnuwLGyL_UEG4A@mail.gmail.com
Fixes: b15cd800 ("dax: Convert page fault handlers to XArray")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Dan Williams <dan.j.williams@intel.com>
Reported-by: Robert Barror <robert.barror@intel.com>
Reported-by: Seema Pandit <seema.pandit@intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

One of the more common cases of allocation size calculations is finding
the size of a structure that has a zero-sized array at the end, along
with memory for some number of elements for that array.  For example:

  struct foo {
       int stuff;
       struct boo entry[];
  };

  size = sizeof(struct foo) + count * sizeof(struct boo);
  instance = kmalloc(size, GFP_KERNEL);

Instead of leaving these open-coded and prone to type mistakes, we can now
use the new struct_size() helper:

  instance = kmalloc(struct_size(instance, entry, count), GFP_KERNEL);

Also, notice that variable size is unnecessary, hence it is removed.

This code was detected with the help of Coccinelle.

Link: http://lkml.kernel.org/r/20190604164226.GA13823@embeddedorSigned-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

locked_vm accounting is done roughly the same way in five places, so
unify them in a helper.

Include the helper's caller in the debug print to distinguish between
callsites.

Error codes stay the same, so user-visible behavior does too.  The one
exception is that the -EPERM case in tce_account_locked_vm is removed
because Alexey has never seen it triggered.

[daniel.m.jordan@oracle.com: v3]
  Link: http://lkml.kernel.org/r/20190529205019.20927-1-daniel.m.jordan@oracle.com
[sfr@canb.auug.org.au: fix mm/util.c]
Link: http://lkml.kernel.org/r/20190524175045.26897-1-daniel.m.jordan@oracle.comSigned-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Cc: Alan Tull <atull@kernel.org>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Moritz Fischer <mdf@kernel.org>
Cc: Paul Mackerras <paulus@ozlabs.org>
Cc: Steve Sistare <steven.sistare@oracle.com>
Cc: Wu Hao <hao.wu@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>