- 26 Feb, 2010 40 commits
-
-
Matthias Benesch authored
Add Micronas nGene PCIe bridge driver. The source code was provided by Micronas / Ralph Metzler, and has been reformatted to comply with Linux Codingstyle. Signed-off-by:
Matthias Benesch <twoof7@freenet.de> Signed-off-by:
Ralph Metzler <rjkm@metzlerbros.de> Signed-off-by:
Oliver Endriss <o.endriss@gmx.de> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Janne Grunau authored
Signed-off-by:
Janne Grunau <j@jannau.net> Signed-off-by:
-
Márton Németh authored
The fifth parameter of usb_bulk_msg() is a pointer to signed (see <linux/usb.h>) so also call this function with pointer to signed. This will remove the following sparse warning (see "make C=1"): * warning: incorrect type in argument 5 (different signedness) expected int *actual_length got unsigned int *<noident> Signed-off-by:Márton Németh <nm127@freemail.hu> Signed-off-by:
-
Jiri Slaby authored
So as a final patch, add support for hash and one hash entry for MSI digi vox mini II: iManufacturer 1 Afatech iProduct 2 DVB-T 2 iSerial 3 010101010600001 It is now handled with proper IR and key map tables. Signed-off-by:
Jiri Slaby <jslaby@suse.cz> Acked-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
-
Jiri Slaby authored
Add af9015_setup structure to hold (right now only remote) setup of distinct receivers. Add af9015_setup_match for matching ids against tables. This is for easier matching different kind of ids against tables to obtain setups. Currently module parameters and usb vendor ids are switched into and matched against tables. Hashes will follow. Signed-off-by:
-
Jiri Slaby authored
This is just a code shuffle without functional changes. For easier review of later changes, i.e. preparation. Signed-off-by:
-
Jiri Slaby authored
This will be useful for matching of IR tables later. We read the eeprom anyway for dumping. Switch the dumping to print_hex_dump_bytes and compute hash above that by hash = 0; for (u32 VAL) in (eeprom): hash *= GOLDEN_RATIO_PRIME_32 hash += VAL; // while preserving endinaness The computation is moved earlier to the flow, namely from af9015_af9013_frontend_attach to af9015_read_config, so that we can access the sum in af9015_read_config already. Signed-off-by:
-
Kusanagi Kouichi authored
I tested only tv and composite. Video works fine but no audio. Signed-off-by:
Kusanagi Kouichi <slash@ac.auone-net.jp> Signed-off-by:
-
Márton Németh authored
The default_video_input and default_audio_input module parameters are only used inside the hdpvr-core.c file so make them static. This will remove the following sparse warnings (see "make C=1"): * warning: symbol 'default_video_input' was not declared. Should it be static? * warning: symbol 'default_audio_input' was not declared. Should it be static? Signed-off-by:
-
Richard Röjfors authored
Initial support for the SAA7706H Car Radio DSP. It is a I2C device and currently the mute control is supported. When the device is unmuted it is brought out of reset and initiated using the proposed intialisation sequence. When muted the DSP is brought into reset state. [akpm@linux-foundation.org: include delay.h] Signed-off-by:
Richard Röjfors <richard.rojfors@pelagicore.com> Cc: Douglas Schilling Landgraf <dougsland@gmail.com> Cc: Hans Verkuil <hverkuil@xs4all.nl> Cc: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Andrew Morton authored
Mad guess. Signed-off-by:
Manu Abraham <manu@linuxtv.org> Acked-by:
-
Andrew Morton authored
drivers/media/dvb/frontends/stv090x.c: In function 'stv090x_blind_search': drivers/media/dvb/frontends/stv090x.c:1967: warning: 'coarse_fail' may be used uninitialized in this function Cc: Manu Abraham <manu@linuxtv.org> Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by:
-
Andrew Morton authored
drivers/media/video/cx18/cx18-alsa-pcm.c: In function 'cx18_alsa_announce_pcm_data': drivers/media/video/cx18/cx18-alsa-pcm.c:82: warning: format '%d' expects type 'int', but argument 5 has type 'size_t' Cc: Andy Walls <awalls@radix.net> Signed-off-by:
-
Roel Kluin authored
If in a cold state and the download succeeded ret is zero, but we should return -ENOMEM. Signed-off-by:
Roel Kluin <roel.kluin@gmail.com> Signed-off-by:
-
Magnus Alm authored
fix Video/Sound support "Leadtek winfast tv usbii deluxe". Now, it is working Stereo, IR, Radio, TV, Svideo and Composite. Signed-off-by: -
Márton Németh authored
Make the file local parameters static. This will remove the following sparse warnings (see "make C=1"): * warning: symbol 'ir_pos' was not declared. Should it be static? * warning: symbol 'ir_word' was not declared. Should it be static? * warning: symbol 'ir_toggle' was not declared. Should it be static? Signed-off-by:
-
Massimo Del Fedele authored
Adds support to Pinnacle PCTV310e hybrid tuner card, for DVB-T and remote control, still no analog video. [mchehab@redhat.com: fix CodingStyle issues] Signed-off-by: -
Alexander Strakh authored
Fix lock imbalances in function device_authorization. Signed-off-by:
Alexander Strakh <strakh@ispras.ru> Signed-off-by:
-
Roel Kluin authored
state->internal allocation may fail as well as the allocation of stv0900_first_inode or new_node->next_inode in append_internal(). Signed-off-by:
-
Andy Walls authored
Operations that manipulates the state of the encoder or global instance flags and variables should be serialized. This adds some serialization locks that have been missing from cx18-dvb. Since the DVB part of the CX23418 doesn't affect the encoder, no one would likely have ever noticed a race in changing card instance variables. Signed-off-by:
Andy Walls <awalls@radix.net> Signed-off-by:
-
Andy Walls authored
Signed-off-by:
-
Andy Walls authored
The cx18_open_id is normally dynamically allocated and stored in the filp->private_data for v4l2 file operations. The cx18-alsa routines should not dynamically allocate a cx18_open_id because they never store it anywhere and never free it. This change fixes that and plugs a memory leak. Signed-off-by:
-
Andy Walls authored
File operations that manipulate the state of the encoder, or video or audio subdevices or some of the stream flags need to be serialized. Add the serilization locks to cx18-alsa in a manner consistent with the locking for the v4l2 file operations. Signed-off-by:
-
Andy Walls authored
Rename snd_cx18_mixer_lock() to snd_cx18_lock() in anticpation of using it in the cx18-alsa-pcm.c file routines. Signed-off-by:
-
Kusanagi Kouichi authored
If CX25840_VIN1_CH1 and the like is used, input is not detected as composite. Their value is 0x800000XX and CX25840_COMPONENT_ON is 0x80000200. So 739 else if ((vid_input & CX25840_COMPONENT_ON) == 0) this condition never be true. Signed-off-by:
-
Jean-François Moine authored
Signed-off-by:
Jean-François Moine <moinejf@free.fr> Signed-off-by:
-
Nicolau Werneck authored
Signed-off-by:
Nicolau Werneck <nwerneck@gmail.com> Signed-off-by:
-
Jean-Francois Moine authored
Signed-off-by:
-
Márton Németh authored
Signed-off-by:
-
Márton Németh authored
Signed-off-by:
-
Jean Delvare authored
The init and exit functions are needlessly complex. Remove the bloat: * Drop irrelevant/outdated comments. * Remove useless bt878_pci_driver_registered global variable. Signed-off-by:
Jean Delvare <khali@linux-fr.org> Signed-off-by:
-
Arnaud Patard authored
When using VIDIOC_QBUF with memory type set to V4L2_MEMORY_MMAP, the v4l2_buffer buffer gets unmodified on drivers like uvc (well, only bytesused field is modified). Then some apps like gstreamer are reusing the same buffer later to call munmap (eg passing the buffer "length" field as 2nd parameter of munmap). It's working fine on full 32bits but on 32bits systems with 64bit kernel, the get_v4l2_buffer32() doesn't copy length/m.offset values and then copy garbage to userspace in put_v4l2_buffer32(). This has for consequence things like that in the libv4l2 logs: libv4l2: v4l2 unknown munmap 0x2e2b0000, -2145144908 libv4l2: v4l2 unknown munmap 0x2e530000, -2145144908 The buffer are not unmap'ed and then if the application close and open again the device, it won't work and logs will show something like: libv4l2: error setting pixformat: Device or resource busy The easy solution is to read length and m.offset in get_v4l2_buffer32(). Signed-off-by:
Arnaud Patard <apatard@mandriva.com> Signed-off-by:
-
Márton Németh authored
The loop counter j is declared twice in function error_handler(). Remove the redundant declaration. This will remove the following sparse warning (see "make C=1"): * symbol 'j' shadows an earlier one Signed-off-by:
-
Márton Németh authored
The second parameter of g_input_status operation in <media/v4l2-subdev.h> is unsigned so also call it with unsigned paramter. This will remove the following sparse warning (see "make C=1"): * incorrect type in argument 2 (different signedness) expected unsigned int [usertype] *status got int *<noident> Signed-off-by: -
Roel Kluin authored
The wrong command was printed for case CX2341X_ENC_SET_DNR_FILTER_MODE, and a typo in case CX2341X_ENC_SET_PCR_ID. Signed-off-by:
Steven Toth <stoth@kernellabs.com> Signed-off-by:
-
Stefan Richter authored
Before each FCP transdaction, the entire 512 bytes of the FCP frame were cleared, then values filled in. Clear only the bytes between filled-in bytes and end of the - request frame, or - response frame if data from a larger response will be needed, or - whole frame if data from a variable length response will be taken. Signed-off-by:
Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by:
-
Stefan Richter authored
FCP transactions as well as CMP transactions were serialized with mutex_lock_interruptible. It is extremely unlikly though that a signal will arrive while a concurrent process holds the mutex. And even if one does, the duration of a transaction is reasonably short (1.2 seconds if all retries time out, usually much shorter). Hence simplify the code to plain mutex_lock. Signed-off-by:
-
Stefan Richter authored
This is a portability fix and reduces stack usage. The DMA mapping API cannot map on-stack addresses, as explained in Documentation/DMA-mapping.txt. Convert the two cases of on-stack packet payload buffers in firedtv (payload of write requests in avc_write and of lock requests in cmp_lock) to slab-allocated memory. We use the 512 bytes sized FCP frame buffer in struct firedtv for this purpose. Previously it held only incoming FCP responses, now it holds pending FCP requests and is then overwriten by an FCP response from the tuner subunit. Ditto for CMP lock requests and responses. Accesses to the payload buffer are serialized by fdtv->avc_mutex. As a welcome side effect, stack usage of the AV/C transaction functions is reduced by 512 bytes. Alas, avc_register_remote_control() is a special case: It previously did not wait for a response. To fit better in with the other FCP transactions, let it wait for an interim response. Signed-off-by:
-
Mauro Carvalho Chehab authored
WARNING: drivers/media/video/cx18/cx18-alsa.o(.text+0x4de): Section mismatch in reference from the function cx18_alsa_load() to the function .init.text:snd_cx18_init() The function cx18_alsa_load() references the function __init snd_cx18_init(). This is often because cx18_alsa_load lacks a __init annotation or the annotation of snd_cx18_init is wrong. WARNING: drivers/media/video/cx18/built-in.o(.text+0x1c022): Section mismatch in reference from the function cx18_alsa_load() to the function .init.text:snd_cx18_init() The function cx18_alsa_load() references the function __init snd_cx18_init(). This is often because cx18_alsa_load lacks a __init annotation or the annotation of snd_cx18_init is wrong. WARNING: drivers/media/video/built-in.o(.text+0x28cc56): Section mismatch in reference from the function cx18_alsa_load() to the function .init.text:snd_cx18_init() The function cx18_alsa_load() references the function __init snd_cx18_init(). This is often because cx18_alsa_load lacks a __init annotation or the annotation of snd_cx18_init is wrong. WARNING: drivers/media/built-in.o(.text+0x2d2432): Section mismatch in reference from the function cx18_alsa_load() to the function .init.text:snd_cx18_init() The function cx18_alsa_load() references the function __init snd_cx18_init(). This is often because cx18_alsa_load lacks a __init annotation or the annotation of snd_cx18_init is wrong. Signed-off-by: -
Mauro Carvalho Chehab authored
drivers/media/video/cx18/cx18-driver.c:252: warning: ‘request_modules’ used but never defined Signed-off-by:
-
