- 19 Mar, 2012 5 commits
-
-
NeilBrown authored
md.h has an 'rdev_for_each()' macro for iterating the rdevs in an mddev. However it uses the 'safe' version of list_for_each_entry, and so requires the extra variable, but doesn't include 'safe' in the name, which is useful documentation. Consequently some places use this safe version without needing it, and many use an explicity list_for_each entry. So: - rename rdev_for_each to rdev_for_each_safe - create a new rdev_for_each which uses the plain list_for_each_entry, - use the 'safe' version only where needed, and convert all other list_for_each_entry calls to use rdev_for_each. Signed-off-by:
NeilBrown <neilb@suse.de>
-
NeilBrown authored
If RAID1 or RAID10 is used under LVM or some other stacking block device, it is possible to enter a deadlock during resync or recovery. This can happen if the upper level block device creates two requests to the RAID1 or RAID10. The first request gets processed, blocks recovery and queue requests for underlying requests in current->bio_list. A resync request then starts which will wait for those requests and block new IO. But then the second request to the RAID1/10 will be attempted and it cannot progress until the resync request completes, which cannot progress until the underlying device requests complete, which are on a queue behind that second request. So allow that second request to proceed even though there is a resync request about to start. This is suitable for any -stable kernel. Cc: stable@vger.kernel.org Reported-by:
Ray Morris <support@bettercgi.com> Tested-by:
Ray Morris <support@bettercgi.com> Signed-off-by:
NeilBrown <neilb@suse.de>
-
NeilBrown authored
When commit 69e51b44 (md/bitmap: separate out loading a bitmap...) created bitmap_load, it missed calling it after bitmap_create when a bitmap is created through the sysfs interface. So if a bitmap is added this way, we don't allocate memory properly and can crash. This is suitable for any -stable release since 2.6.35. Cc: stable@vger.kernel.org Signed-off-by:
NeilBrown <neilb@suse.de>
-
NeilBrown authored
It seems that with recent kernel, writeback can still be happening while shutdown is happening, and consequently data can be written after the md reboot notifier switches all arrays to read-only. This causes a BUG. So don't switch them to read-only - just mark them clean and set 'safemode' to '2' which mean that immediately after any write the array will be switch back to 'clean'. This could result in the shutdown happening when array is marked dirty, thus forcing a resync on reboot. However if you reboot without performing a "sync" first, you get to keep both halves. This is suitable for any stable kernel (though there might be some conflicts with obvious fixes in earlier kernels). Cc: stable@vger.kernel.org Signed-off-by:
NeilBrown <neilb@suse.de>
-
NeilBrown authored
When an array is failed (some data inaccessible) then there is no point attempting to add a spare as it could not possibly be recovered. However that may be value in re-adding a recently removed device. e.g. if there is a write-intent-bitmap and it is clear, then access to the data could be restored by this action. So don't reject a re-add to a failed array for RAID10 and RAID5 (the only arrays types that check for a failed array). Signed-off-by:
NeilBrown <neilb@suse.de>
-
- 13 Mar, 2012 5 commits
-
-
majianpeng authored
Signed-off-by:
majianpeng <majianpeng@gmail.com> Signed-off-by:
NeilBrown <neilb@suse.de>
-
majianpeng authored
Signed-off-by:
majianpeng <majianpeng@gmail.com> Signed-off-by:
NeilBrown <neilb@suse.de>
-
NeilBrown authored
commit 908f4fbd removed the last user of this variable, so we should discard it completely. Signed-off-by:
NeilBrown <neilb@suse.de>
-
NeilBrown authored
Recent commit 4ca40c2c (md/raid10: Allow replacement device ...) added an smp_mb in end_sync_write. This was to close a possible race with raid10_remove_disk. However there is no such race as it is never attempted to remove a disk while resync (or recovery) is happening. so the smp_mb is just noise. Signed-off-by:
NeilBrown <neilb@suse.de>
-
NeilBrown authored
Leaving a valid reshape_position value in place could be confusing. Signed-off-by:
NeilBrown <neilb@suse.de>
-
- 10 Mar, 2012 4 commits
-
-
Linus Torvalds authored
-
Al Viro authored
Current code has put_ioctx() called asynchronously from aio_fput_routine(); that's done *after* we have killed the request that used to pin ioctx, so there's nothing to stop io_destroy() waiting in wait_for_all_aios() from progressing. As the result, we can end up with async call of put_ioctx() being the last one and possibly happening during exit_mmap() or elf_core_dump(), neither of which expects stray munmap() being done to them... We do need to prevent _freeing_ ioctx until aio_fput_routine() is done with that, but that's all we care about - neither io_destroy() nor exit_aio() will progress past wait_for_all_aios() until aio_fput_routine() does really_put_req(), so the ioctx teardown won't be done until then and we don't care about the contents of ioctx past that point. Since actual freeing of these suckers is RCU-delayed, we don't need to bump ioctx refcount when request goes into list for async removal. All we need is rcu_read_lock held just over the ->ctx_lock-protected area in aio_fput_routine(). Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Reviewed-by:
Jeff Moyer <jmoyer@redhat.com> Acked-by:
Benjamin LaHaise <bcrl@kvack.org> Cc: stable@vger.kernel.org Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Al Viro authored
Have ioctx_alloc() return an extra reference, so that caller would drop it on success and not bother with re-grabbing it on failure exit. The current code is obviously broken - io_destroy() from another thread that managed to guess the address io_setup() would've returned would free ioctx right under us; gets especially interesting if aio_context_t * we pass to io_setup() points to PROT_READ mapping, so put_user() fails and we end up doing io_destroy() on kioctx another thread has just got freed... Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Acked-by:
Benjamin LaHaise <bcrl@kvack.org> Reviewed-by:
Jeff Moyer <jmoyer@redhat.com> Cc: stable@vger.kernel.org Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfsLinus Torvalds authored
Pull btrfs updates from Chris Mason: "I have two additional and btrfs fixes in my for-linus branch. One is a casting error that leads to memory corruption on i386 during scrub, and the other fixes a corner case in the backref walking code (also triggered by scrub)." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: fix casting error in scrub reada code btrfs: fix locking issues in find_parent_nodes()
-
- 09 Mar, 2012 14 commits
-
-
Hugh Dickins authored
Respectfully revert commit e6ca7b89 "memcg: fix mapcount check in move charge code for anonymous page" for the 3.3 release, so that it behaves exactly like releases 2.6.35 through 3.2 in this respect. Horiguchi-san's commit is correct in itself, 1 makes much more sense than 2 in that check; but it does not go far enough - swapcount should be considered too - if we really want such a check at all. We appear to have reached agreement now, and expect that 3.4 will remove the mapcount check, but had better not make 3.3 different. Signed-off-by:
Hugh Dickins <hughd@google.com> Reviewed-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Thomas Gleixner authored
Commit f0fbf0ab ("x86: integrate delay functions") converted delay_tsc() into a random delay generator for 64 bit. The reason is that it merged the mostly identical versions of delay_32.c and delay_64.c. Though the subtle difference of the result was: static void delay_tsc(unsigned long loops) { - unsigned bclock, now; + unsigned long bclock, now; Now the function uses rdtscl() which returns the lower 32bit of the TSC. On 32bit that's not problematic as unsigned long is 32bit. On 64 bit this fails when the lower 32bit are close to wrap around when bclock is read, because the following check if ((now - bclock) >= loops) break; evaluated to true on 64bit for e.g. bclock = 0xffffffff and now = 0 because the unsigned long (now - bclock) of these values results in 0xffffffff00000001 which is definitely larger than the loops value. That explains Tvortkos observation: "Because I am seeing udelay(500) (_occasionally_) being short, and that by delaying for some duration between 0us (yep) and 491us." Make those variables explicitely u32 again, so this works for both 32 and 64 bit. Reported-by:
Tvrtko Ursulin <tvrtko.ursulin@onelan.co.uk> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org # >= 2.6.27 Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "Nothing exciting here: just a few regression fixes for HD-audio and ASoC, also the support of missing 32bit compat ioctl for HDSPM." * tag 'sound-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hdspm - Provide ioctl_compat ALSA: hda/realtek - Apply the coef-setup only to ALC269VB ALSA: hda - add quirk to detect CD input on Gigabyte EP45-DS3 ASoC: neo1973: fix neo1973 wm8753 initialization
-
David Brown authored
The msm git tree moved to git://git.kernel.org/pub/scm/linux/kernel/git/davidb/linux-msm.gitSigned-off-by:
David Brown <davidb@codeaurora.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://linux-c6x.org/git/projects/linux-c6x-upstreamingLinus Torvalds authored
Pull C6X fix from Mark Salter: "Fix for C6X KSTK_EIP and KSTK_ESP macros." * tag 'for-linus' of git://linux-c6x.org/git/projects/linux-c6x-upstreaming: C6X: fix KSTK_EIP and KSTK_ESP macros
-
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommuLinus Torvalds authored
Pull two IOMMU fixes from Joerg Roedel: "The first is an additional fix for the OMAP initialization order issue and the second patch fixes a possible section mismatch which can lead to a kernel crash in the AMD IOMMU driver when suspend/resume is used and the compiler has not inlined the iommu_set_device_table function." * tag 'iommu-fixes-v3.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: x86/amd: iommu_set_device_table() must not be __init ARM: OMAP: fix iommu, not mailbox
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull radeon drm stuff from Dave Airlie: "Just some radeon fixes, one is for an oops where we run out of ioremap space on some big hardware systems in 32-bit mode, stuff doesn't work properly but at least the machine will boot. One regression fix, and two bugs, one hw, one blit code." * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/radeon/kms: fix hdmi duallink checks drm/radeon/kms: set SX_MISC in the r6xx blit code (v2) drm/radeon: deal with errors from framebuffer init path. drm/radeon: fix a semaphore deadlock on pre cayman asics
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking from David Miller: 1) IPV4 routing metrics can become stale when routes are changed by the administrator, fix from Steffen Klassert. 2) atl1c does "val |= XXX;" where XXX is a bit number not a bit mask, fix by using set_bit. From Dan Carpenter. 3) Memory accounting bug in carl9170 driver results in wedged TX queue. Fix from Nicolas Cavallari. 4) iwlwifi accidently uses "sizeof(ptr)" instead of "sizeof(*ptr)", fix from Johannes Berg. 5) Openvswitch doesn't honor dp_ifindex when doing vport lookups, fix from Ben Pfaff. 6) ehea conversion to 64-bit stats lost multicast and rx_errors accounting, fix from Eric Dumazet. 7) Bridge state transition logging in br_stp_disable_port() is busted, it's emitted at the wrong time and the message is in the wrong tense, fix from Paulius Zaleckas. 8) mlx4 device erroneously invokes the queue resize firmware operation twice, fix from Jack Morgenstein. 9) Fix deadlock in usbnet, need to drop lock when invoking usb_unlink_urb() otherwise we recurse into taking it again. Fix from Sebastian Siewior. 10) hyperv network driver uses the wrong driver name string, fix from Haiyang Zhang. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: net/hyperv: Use the built-in macro KBUILD_MODNAME for this driver net/usbnet: avoid recursive locking in usbnet_stop() route: Remove redirect_genid inetpeer: Invalidate the inetpeer tree along with the routing cache mlx4_core: fix bug in modify_cq wrapper for resize flow. atl1c: set ATL1C_WORK_EVENT_RESET bit correctly bridge: fix state reporting when port is disabled bridge: br_log_state() s/entering/entered/ ehea: restore multicast and rx_errors fields openvswitch: Fix checksum update for actions on UDP packets. openvswitch: Honor dp_ifindex, when specified, for vport lookup by name. iwlwifi: fix wowlan suspend mwifiex: reset encryption mode flag before association carl9170: fix frame delivery if sta is in powersave mode carl9170: Fix memory accounting when sta is in power-save mode.
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull last minute fixes from Olof Johansson: "One samsung build fix due to a mis-applied patch, and a small set of OMAP fixes. This should be the last from arm-soc for 3.3, hopefully." * tag 'fixes-urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: S3C2440: Fixed build error for s3c244x ARM: OMAP2+: Fix module build errors with CONFIG_OMAP4_ERRATA_I688 ARM: OMAP: id: Add missing break statement in omap3xxx_check_revision ARM: OMAP2+: Remove apply_uV constraints for fixed regulator ARM: OMAP: irqs: Fix NR_IRQS value to handle PRCM interrupts
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulatorLinus Torvalds authored
Pull regulator fix from Mark Brown: "Another small, clear fix in a specific driver." * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: tps65910: Configure correct value for VDDCTRL vout reg
-
git://git.secretlab.ca/git/linux-2.6Linus Torvalds authored
Pull minor devicetree bug fixes and documentation updates from Grant Likely: "Fixes up a duplicate #include, adds an empty implementation of of_find_compatible_node() and make git ignore .dtb files. And fix up bus name on OF described PHYs. Nothing exciting here." * tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linux-2.6: doc: dt: Fix broken reference in gpio-leds documentation of/mdio: fix fixed link bus name of/fdt.c: asm/setup.h included twice of: add picochip vendor prefix dt: add empty of_find_compatible_node function ARM: devicetree: Add .dtb files to arch/arm/boot/.gitignore
-
git://git.secretlab.ca/git/linux-2.6Linus Torvalds authored
Pull SPI section mismatch bug fix for v3.3-rc3 from Grant Likely: "Minor fix for pl022_dma_probe() function which was put in the wrong section." * tag 'spi-for-linus' of git://git.secretlab.ca/git/linux-2.6: Fix section mismatch in spi-pl022.c
-
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-stagingLinus Torvalds authored
Pull four hwmon patches from Guenter Roeck * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (jc42) Add support for AT30TS00, TS3000GB2, TSE2002GB2, and MCP9804 hwmon: (zl6100) Maintain delay parameter in driver instance data hwmon: (pmbus_core) Fix maximum number of POUT alarm attributes hwmon: (jc42) Add support for ST Microelectronics STTS2002 and STTS3000
-
git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dmLinus Torvalds authored
Pull device-mapper fixes for 3.3 from Alasdair Kergon Eight small device-mapper bug fixes. * tag 'dm-3.3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm: dm raid: fix flush support dm raid: set MD_CHANGE_DEVS when rebuilding dm thin metadata: decrement counter after removing mapped block dm thin metadata: unlock superblock in init_pmd error path dm thin metadata: remove incorrect close_device on creation error paths dm flakey: fix crash on read when corrupt_bio_byte not set dm io: fix discard support dm ioctl: do not leak argv if target message only contains whitespace
-
- 08 Mar, 2012 12 commits
-
-
Haiyang Zhang authored
Signed-off-by:
Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by:
K. Y. Srinivasan <kys@microsoft.com> Cc: Olaf Hering <olaf@aepfle.de> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omapOlof Johansson authored
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: Fix module build errors with CONFIG_OMAP4_ERRATA_I688 ARM: OMAP: id: Add missing break statement in omap3xxx_check_revision ARM: OMAP2+: Remove apply_uV constraints for fixed regulator ARM: OMAP: irqs: Fix NR_IRQS value to handle PRCM interrupts
-
Kukjin Kim authored
Fixed following: arch/arm/mach-s3c2440/s3c244x.c: In function 's3c244x_restart': arch/arm/mach-s3c2440/s3c244x.c:209: error: expected declaration or statement at end of input make[1]: *** [arch/arm/mach-s3c24xx/s3c244x.o] Error 1 make: *** [arch/arm/mach-s3c24xx] Error 2 Signed-off-by:
Kukjin Kim <kgene.kim@samsung.com> Signed-off-by:
Olof Johansson <olof@lixom.net>
-
Adrian Knoth authored
snd_hdspm uses its own ioctls to acquire config- and status information. Expose the corresponding ioctl handler via ioctl_compat, so that 32bit applications can use it on 64bit kernels. Signed-off-by:
Adrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by:
Takashi Iwai <tiwai@suse.de>
-
Jan Beulich authored
This function is called from enable_iommus(), which in turn is used from amd_iommu_resume(). Cc: stable@vger.kernel.org Signed-off-by:
Jan Beulich <jbeulich@suse.com> Signed-off-by:
Joerg Roedel <joerg.roedel@amd.com>
-
Alex Deucher authored
All pre-SI chips are limited to 165 Mhz for single link. Code in question will be re-enabled when SI support is added. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=44755 https://bugzilla.kernel.org/show_bug.cgi?id=42887Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
Marek Olšák authored
Mesa may set it to 1, causing all primitives to be killed. v2: also update the r7xx code Signed-off-by:
Marek Olšák <maraeo@gmail.com> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@kernel.org Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
Sebastian Siewior authored
|kernel BUG at kernel/rtmutex.c:724! |[<c029599c>] (rt_spin_lock_slowlock+0x108/0x2bc) from [<c01c2330>] (defer_bh+0x1c/0xb4) |[<c01c2330>] (defer_bh+0x1c/0xb4) from [<c01c3afc>] (rx_complete+0x14c/0x194) |[<c01c3afc>] (rx_complete+0x14c/0x194) from [<c01cac88>] (usb_hcd_giveback_urb+0xa0/0xf0) |[<c01cac88>] (usb_hcd_giveback_urb+0xa0/0xf0) from [<c01e1ff4>] (musb_giveback+0x34/0x40) |[<c01e1ff4>] (musb_giveback+0x34/0x40) from [<c01e2b1c>] (musb_advance_schedule+0xb4/0x1c0) |[<c01e2b1c>] (musb_advance_schedule+0xb4/0x1c0) from [<c01e2ca8>] (musb_cleanup_urb.isra.9+0x80/0x8c) |[<c01e2ca8>] (musb_cleanup_urb.isra.9+0x80/0x8c) from [<c01e2ed0>] (musb_urb_dequeue+0xec/0x108) |[<c01e2ed0>] (musb_urb_dequeue+0xec/0x108) from [<c01cbb90>] (unlink1+0xbc/0xcc) |[<c01cbb90>] (unlink1+0xbc/0xcc) from [<c01cc2ec>] (usb_hcd_unlink_urb+0x54/0xa8) |[<c01cc2ec>] (usb_hcd_unlink_urb+0x54/0xa8) from [<c01c2a84>] (unlink_urbs.isra.17+0x2c/0x58) |[<c01c2a84>] (unlink_urbs.isra.17+0x2c/0x58) from [<c01c2b44>] (usbnet_terminate_urbs+0x94/0x10c) |[<c01c2b44>] (usbnet_terminate_urbs+0x94/0x10c) from [<c01c2d68>] (usbnet_stop+0x100/0x15c) |[<c01c2d68>] (usbnet_stop+0x100/0x15c) from [<c020f718>] (__dev_close_many+0x94/0xc8) defer_bh() takes the lock which is hold during unlink_urbs(). The safe walk suggest that the skb will be removed from the list and this is done by defer_bh() so it seems to be okay to drop the lock here. Cc: stable@kernel.org Reported-by:
AnÃbal Almeida Pinto <anibal.pinto@efacec.com> Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by:
Oliver Neukum <oliver@neukum.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Steffen Klassert authored
As we invalidate the inetpeer tree along with the routing cache now, we don't need a genid to reset the redirect handling when the routing cache is flushed. Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Steffen Klassert authored
We initialize the routing metrics with the values cached on the inetpeer in rt_init_metrics(). So if we have the metrics cached on the inetpeer, we ignore the user configured fib_metrics. To fix this issue, we replace the old tree with a fresh initialized inet_peer_base. The old tree is removed later with a delayed work queue. Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jack Morgenstein authored
The actual FW command is called in procedure "handle_resize". Code incorrectly invoked the FW command again (in good flow), in the modify_cq wrapper function. Fix by skipping second FW invocation unconditionally for resize. Signed-off-by:
Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Dan Carpenter authored
ATL1C_WORK_EVENT_RESET is zero so the original code here is a nop. The intent was to set the zero bit. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-