- 27 Jul, 2005 38 commits
-
-
David Ranson authored
Add support for the MRi PCIDS1 dual port serial card. This card is a little controversial since it is the subject of a PCI vendor/device ID clash. (See http://www.ussg.iu.edu/hypermail/linux/kernel/0303.1/0516.html). I have for now just used the hex ID 0x950a. The divisor was part calculated part iterated, so may not be exactly correct (but works for me at all settings between 300 - 115300 bps). Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Andrew Morton authored
For some reason halfmd4 isn't being linked into the kernel any more and modular ext3 wants it. So statically link the halfmd4 code into the kernel. Signed-off-by:
-
Andrew Morton authored
Fix bug identifued by Richard Purdie <rpurdie@rpsys.net>. oprofile calls check_user_page_readable() from interrupt context, so we deadlock over various VFS locks. But check_user_page_readable() doesn't imply either a read or a write of the page's contents. Change __follow_page() so that check_user_page_readable() can tell __follow_page() that we're not accessing the page's contents, and use that info to avoid the troublesome lock-takings. Also, make follow_page() inline for the single callsite in memory.c to save a bit of stack space. Signed-off-by:
-
Carsten Otte authored
Oliver Paukstadt from our test department is testing the xip patches in Linus' git-tree. He found a problem that shows when reading a file that contains sparse blocks (holes) on a -o xip mounted ext2 filesystem: the BUG_ON() in fs/ext2/xip.c:40 triggers where it should not. The problem was introduced by a cleanup in my previous patch, this patch fixes it. Signed-off-by:
Carsten Otte <cotte@de.ibm.com> Signed-off-by:
-
Pete Zaitcev authored
This patch fixes a microcode lockup in my CD-ROM adapters when a blank CD is inserted. However, do not try to burn CDs yet! I'm pretty sure that trying it will end in coasters. - Fix a few cases where we were unable to resynchronize with replies for previous commands. The main thing is to keep reading replies in case of a stall. This is done with the new state CLRRS. - Since I am forgetting the basic state machine already, document it. - Move counter increments in the looping path in its own function. - Fix a harmless buglet in case CSW read fails to submit: do not override state. - Implement the Alan Stern's idea for adaptive signature checking. Signed-off-by:
Pete Zaitcev <zaitcev@yahoo.com> Cc: Greg KH <greg@kroah.com> Signed-off-by:
-
Andi Kleen authored
All mempolicy changes must be inside the spinlock and readding the rb_erase prevents a crash while doing: > echo "1" > /tmp/numatest > numactl --length=0x4000 --shm /tmp/numatest --localalloc > numactl --length=0x2000 --offset=0 --shm /tmp/numatest --membind=0 > numactl --length=0x2000 --offset=0x2000 --shm /tmp/numatest --membind=1 > ipcs > ipcrm -M "the_key_value_of_this_shm_area" Based on a patch by John Blackwood Cc: <john.blackwood@ccur.com> Cc: <andrea@suse.de> Signed-off-by:
Andi Kleen <ak@suse.de> Signed-off-by:
-
V. ANANDA KRISHNAN authored
- updates the version - fix mixing of declarations and code. The mixing of declarations and code displays warnings when used against RedHat RHEL4.0 distro (compiler version is 3.4.3-22.1) and hence I separated them out. Signed-off-by:
-
V. ANANDA KRISHNAN authored
The jsm driver uses a static number of 253. The major number 253 is a reserved for "LOCAL/EXPERIMENTAL USE" by both char and block devices. So take advantage of the dynamic allocation of major number by the kernel. Signed-off-by:
V. Ananda Krishnan <mansarov@us.ibm.com> Signed-off-by:
-
Olivier Blin authored
This patch adds support for the Olitec ISDN PCI card in the hisax gazel driver. The gazel driver supports this card, but wasn't aware of its PCI ids. Users used to modify the PCI ids of a supported card in include/linux/pci_ids.h and recompile their kernel to get this card running, as said in most Howtos. This patch makes the hisax gazel driver recognize the PCI ids of the Olitec ISDN PCI card. Signed-off-by:
Olivier Blin <oblin@mandriva.com> Signed-off-by:
Karsten Keil <kkeil@suse.de> Signed-off-by:
-
Alan Stern authored
Adds a missing check for an error return code from scsi_sysfs_add_sdev. This resolves entry #4863 in the OSDL bugzilla. Although in that bug report the failure occurred because of a confusion over scanning vs. rescanning, in general add_sdev can fail for a number of reasons (the simplest being insufficient memory) and the caller should cope properly. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Cc: James Bottomley <James.Bottomley@SteelEye.com> Signed-off-by:
-
Ian Kent authored
If the automount daemon receives a signal which causes it to sumarily terminate the autofs4 module leaks dentries. The same problem exists with detached mount requests without the warning. This patch cleans these dentries at umount. Signed-off-by:
Ian Kent <raven@themaw.net> Signed-off-by:
-
Dominik Brodowski authored
Signed-off-by:
Dominik Brodowski <linux@dominikbrodowski.net> Acked-by:
Grant Grundler <grundler@parisc-linux.org> Signed-off-by:
-
George Anzinger authored
Fix the recent off-by-one fix in the itimer code: 1. The repeating timer is figured using the requested time (not +1 as we know where we are in the jiffie). 2. The tests for interval too large are left to the time_val to jiffie code. Signed-off-by:
George Anzinger <george@mvista.com> Signed-off-by:
-
Rolf Eike Beer authored
Usually the device IDs are given in hex. This one is a bit strange: it is without 0x in the first place and used with it some lines later. I suspect the first one to be the wrong. Signed-off-by:
Rolf Eike Beer <eike-kernel@sf-tec.de> Signed-off-by:
-
Nigel Cunningham authored
This patch fixes a warning in the disable_nonboot_cpus call in kernel/power/smp.c. Signed-off by: Nigel Cunningham <nigel@suspend2.net> Signed-off-by:
-
Adrian Bunk authored
drivers/pnp/pnpbios/rsparser.c: In function 'pnpbios_parse_allocated_irqresource': drivers/pnp/pnpbios/rsparser.c:67: error: too many arguments to function 'pcibios_penalize_isa_irq' Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
-
Jan Kara authored
We must drop references to quota structures before releasing the inode. Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Jan Kara authored
We must drop references to quota structures before releasing the inode. Signed-off-by:
-
Jeff Mahoney authored
reiserfs_new_inode() can call iput() with the xattr lock held. This will cause a deadlock to occur when reiserfs_delete_xattrs() is called to clean up. The following patch releases the lock and reacquires it after the iput. This is safe because interaction with xattrs is complete, and the relock is just to balance out the release in the caller. The locking needs some reworking to be more sane, but that's more intrusive and I was just looking to fix this bug. Signed-off-by:
Jeff Mahoney <jeffm@suse.com> Signed-off-by:
-
Jens Axboe authored
AS is doing internal msec<->jiffies conversions twice, so the sysfs tunables which represent time are coming out wrong. The switch from HZ=1000 exposed this. Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by:
-
Nigel Cunningham authored
Here's a patch to fix a missing refrigerator call in jffs2. Signed-off-by:
Nigel Cunningham <nigel@suspend2.net> Signed-off-by:
-
Nigel Cunningham authored
Tvaudio lacks a refrigerator call. This patch fixes that. Signed-off-by:
Nigel Cunningham <ncunningham@suspend2.net> Cc: <video4linux-list@redhat.com> Signed-off-by:
-
Nigel Cunningham authored
Here are fixes for four try_to_freeze calls that are still (incorrectly) using a parameter after the recent try_to_freeze() changes. Signed-off-by:
-
Andi Kleen authored
Fixes boot up lockups on some machines where CPU apic ids don't start with 0 Signed-off-by:
-
Jeff Dike authored
This fixes an interface which differed from its declaration, and includes the relevant header so that this doesn't happen again. Signed-off-by:
Jeff Dike <jdike@addtoit.com> Signed-off-by:
-
Dominik Hackl authored
This patch replaces the deprecated MODULE_PARM function by the new module_param function. Signed-off-by:
Dominik Hackl <dominik@hackl.dhs.org> Signed-off-by:
-
Paolo 'Blaisorblade' Giarrusso authored
This adds the "skas0" parameter to force skas0 operation on SKAS3 host and shows which operating mode has been selected. Signed-off-by:
Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by:
-
Olaf Hering authored
the header file must be build before mk_user_constants. Adding it as a direct dep doesnt work for some reason. arch/um/os-Linux/util/mk_user_constants.c:2:26: error: user-offsets.h: No such file or directory arch/um/os-Linux/util/mk_user_constants.c: In function 'main': arch/um/os-Linux/util/mk_user_constants.c:17: error: '__UM_FRAME_SIZE' undeclared (first use in this function) arch/um/os-Linux/util/mk_user_constants.c:17: error: (Each undeclared identifier is reported only once arch/um/os-Linux/util/mk_user_constants.c:17: error: for each function it appears in.) make[1]: *** [arch/um/os-Linux/util/mk_user_constants] Error 1 Signed-off-by:
Olaf Hering <olh@suse.de> Cc: Paolo Giarrusso <blaisorblade@yahoo.it> Signed-off-by:
-
Olaf Hering authored
scripts/Makefile.build:13: /Makefile: No such file or directory scripts/Makefile.build:64: kbuild: Makefile.build is included improperly the define was removed, but its still required to build some targets. Signed-off-by:
-
NeilBrown authored
Without this, and attempt to 'grow' an array will claim to have synced the extra part without actually having done anything. Signed-off-by:
Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by:
-
Yoichi Yuasa authored
arch/mips/Kconfig is defining CONFIG_FB as bool and drivers/video/Kconfig was changed a while ago to define it as tristate. Remove the MIPS definition. Signed-off-by:
Yoichi Yuasa <yuasa@hh.iij4u.or.jp> Signed-off-by:
-
Alexey Dobriyan authored
One chunk was lost somewhere between my and Andrew's machine. Noticed by Victor Fusco. Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
-
Kumar Gala authored
A previous patch to remove support for the OCP device model was way to generious and moved some of the platform device model code, oops. Signed-off-by:
Kumar Gala <kumar.gala@freescale.com> Cc: Greg KH <greg@kroah.com> Signed-off-by:
-
Andrew Morton authored
include/asm/ptrace.h: In function `user_mode_vm': include/asm/ptrace.h:67: `VM_MASK' undeclared (first use in this function) Cc: Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by:
-
Andrew Morton authored
Signed-off-by:
-
Andrew Morton authored
drivers/char/watchdog/softdog.c:94: too many arguments to function `emergency_restart' Signed-off-by:
-
Andrew Morton authored
drivers/char/watchdog/eurotechwdt.c:165: too many arguments to function `emergency_restart' Signed-off-by:
-
Chuck Ebbert authored
- make the new user_mode() return 0 or 1 (same as x86_64) - remove conditional jump from user_mode_vm() it's called every timer tick on each CPU on SMP) Signed-off-by:
Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by:
-
- 26 Jul, 2005 2 commits
-
-
Linus Torvalds authored
-
Tom Rini authored
As Marcelo has been spending a great deal of time working on MPC8xx systems of late (thanks!) and has more time than I do now for it, I'm handing this over to him. Signed-off-by:
Tom Rini <trini@kernel.crashing.org> Signed-off-by:
-
