- 07 Sep, 2016 8 commits
-
-
Pablo Neira Ayuso authored
Use xor to decide to break further rule evaluation or not, since the existing logic doesn't achieve the expected inversion. Signed-off-by:Pablo Neira Ayuso <pablo@netfilter.org>
-
Laura Garcia Liebana authored
The _until_ attribute is renamed to _modulus_ as the behaviour is similar to other expresions with number limits (ex. nft_hash). Renaming is possible because there isn't a kernel release yet with these changes. Signed-off-by:
Laura Garcia Liebana <nevola@gmail.com> Signed-off-by:
-
Gao Feng authored
There are some debug code which are commented out in find_pattern by #if 0. Now remove them. Signed-off-by:
Gao Feng <fgao@ikuai8.com> Signed-off-by:
-
Gao Feng authored
The caller function "help" has already make sure the datalen could not be zero before invoke find_pattern as a parameter by the following codes if (dataoff >= skb->len) { pr_debug("ftp: dataoff(%u) >= skblen(%u)\n", dataoff, skb->len); return NF_ACCEPT; } datalen = skb->len - dataoff; And the latter codes "ends_in_nl = (fb_ptr[datalen - 1] == '\n');" use datalen directly without checking if it is zero. So it is unneccessary to check it in find_pattern too. Signed-off-by: -
Marco Angaroni authored
Current parsing methods for SIP header Call-ID do not check correctly all characters allowed by RFC 3261. In particular "," character is allowed instead of "'" character. As a result Call-ID headers like the following are discarded by IPVS SIP persistence engine. Call-ID: -.!%*_+`'~()<>:\"/[]?{} Above example is composed using all non-alphanumeric characters listed in RFC 3261 for Call-ID header syntax. Proposed fix is in nf_conntrack_sip module; function iswordc() checks this range: (c >= '(' && c <= '/') which includes these characters: ()*+,-./ They are all allowed except ",". Instead "'" is not included in the list. Below is an extract of relevant SIP ABNF syntax. Call-ID = ( "Call-ID" / "i" ) HCOLON callid callid = word [ "@" word ] HCOLON = *( SP / HTAB ) ":" SWS SWS = [LWS] ; sep whitespace LWS = [*WSP CRLF] 1*WSP ; linear whitespace WSP = SP / HTAB word = 1*(alphanum / "-" / "." / "!" / "%" / "*" / "_" / "+" / "`" / "'" / "~" / "(" / ")" / "<" / ">" / ":" / "\" / DQUOTE / "/" / "[" / "]" / "?" / "{" / "}" ) Signed-off-by:Marco Angaroni <marcoangaroni@gmail.com> Signed-off-by:
-
Marco Angaroni authored
Current parsing methods for SIP headers do not properly manage continuation lines: in case of Call-ID header the first character of Call-ID header value is truncated. As a result IPVS SIP persistence engine hashes over a call-id that is not exactly the one present in the originale message. Example: "Call-ID: \r\n abcdeABCDE1234" results in extracted call-id equal to "bcdeABCDE1234". In above example Call-ID is represented as a string in C language. Obviously in real message the first bytes after colon (":") are "20 0d 0a 20". Proposed fix is in nf_conntrack_sip module. Since sip_follow_continuation() function walks past the leading spaces or tabs of the continuation line, sip_skip_whitespace() should simply return the ouput of sip_follow_continuation(). Otherwise another iteration of the for loop is done and dptr is incremented by one pointing to the second character of the first word in the header. Below is an extract of relevant SIP ABNF syntax. Call-ID = ( "Call-ID" / "i" ) HCOLON callid callid = word [ "@" word ] HCOLON = *( SP / HTAB ) ":" SWS SWS = [LWS] ; sep whitespace LWS = [*WSP CRLF] 1*WSP ; linear whitespace WSP = SP / HTAB word = 1*(alphanum / "-" / "." / "!" / "%" / "*" / "_" / "+" / "`" / "'" / "~" / "(" / ")" / "<" / ">" / ":" / "\" / DQUOTE / "/" / "[" / "]" / "?" / "{" / "}" ) Signed-off-by: -
Gao Feng authored
netfilter: gre: Use consistent GRE and PTTP header structure instead of the ones defined by netfilter There are two existing strutures which defines the GRE and PPTP header. So use these two structures instead of the ones defined by netfilter to keep consitent with other codes. Signed-off-by:
-
Gao Feng authored
There are already some GRE_* macros in kernel, so it is unnecessary to define these macros. And remove some useless macros Signed-off-by:
-
- 06 Sep, 2016 27 commits
-
-
Arnd Bergmann authored
gpio_to_irq does not return NO_IRQ but instead returns a negative error code on failure. Returning NO_IRQ from the function has no negative effects as we only compare the result to the expected interrupt number, but it's better to return a proper failure code for consistency, and we should remove NO_IRQ from the kernel entirely. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Bert Kenward authored
Reported-by:
Ma Yuying <yuma@redhat.com> Suggested-by:
Jarod Wilson <jarod@redhat.com> Signed-off-by:
Bert Kenward <bkenward@solarflare.com> Reviewed-by:
-
Arnd Bergmann authored
The newly added bpf_overflow_handler function is only built of both CONFIG_EVENT_TRACING and CONFIG_BPF_SYSCALL are enabled, but the caller only checks the latter: kernel/events/core.c: In function 'perf_event_alloc': kernel/events/core.c:9106:27: error: 'bpf_overflow_handler' undeclared (first use in this function) This changes the caller so we also skip this call if CONFIG_EVENT_TRACING is disabled entirely. Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
-
Baoyou Xie authored
We get 1 warning when building kernel with W=1: drivers/net/ethernet/arc/emac_mdio.c:107:5: warning: no previous prototype for 'arc_mdio_reset' [-Wmissing-prototypes] In fact, this function is only used in the file in which it is declared and don't need a declaration, but can be made static. so this patch marks this function with 'static'. Signed-off-by:
Baoyou Xie <baoyou.xie@linaro.org> Signed-off-by:
-
Baoyou Xie authored
We get a few warnings when building kernel with W=1: drivers/net/usb/lan78xx.c:1182:6: warning: no previous prototype for 'lan78xx_defer_kevent' [-Wmissing-prototypes] drivers/net/usb/lan78xx.c:1409:5: warning: no previous prototype for 'lan78xx_nway_reset' [-Wmissing-prototypes] drivers/net/usb/lan78xx.c:2000:5: warning: no previous prototype for 'lan78xx_set_mac_addr' [-Wmissing-prototypes] .... In fact, these functions are only used in the file in which they are declared and don't need a declaration, but can be made static. so this patch marks these functions with 'static'. Signed-off-by:
-
David S. Miller authored
-
Tomer Tayar authored
Adds support for several infrastructure operations that are done as part of debug data collection. Signed-off-by:
Tomer Tayar <Tomer.Tayar@qlogic.com> Signed-off-by:
Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by:
-
Alexander Duyck authored
Signed-off-by:
Alexander Duyck <aduyck@mirantis.com> Tested-by:
-
Joe Perches authored
These messages are unnecessary as OOM allocation failures already do a dump_stack() giving more or less the same information. $ size drivers/net/ethernet/qlogic/qed/built-in.o* (defconfig x86-64) text data bss dec hex filename 127817 27969 32800 188586 2e0aa drivers/net/ethernet/qlogic/qed/built-in.o.new 132474 27969 32800 193243 2f2db drivers/net/ethernet/qlogic/qed/built-in.o.old Miscellanea: o Change allocs to the generally preferred forms where possible. Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
David S. Miller authored
Merge tag 'rxrpc-rewrite-20160904-2' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs David Howells says: ==================== rxrpc: Split output code from sendmsg code Here's a set of small patches that split the packet transmission code from the sendmsg code and simply rearrange the new file to make it more logically laid out ready for being rewritten. An enum is also moved out of the header file to there as it's only used there. This needs to be applied on top of the just-posted fixes patch set. ==================== Signed-off-by:
-
David S. Miller authored
Merge tag 'rxrpc-rewrite-20160904-1' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs David Howells says: ==================== rxrpc: Small fixes Here's a set of small fix patches: (1) Fix some uninitialised variables. (2) Set the client call state before making it live by attaching it to the conn struct. (3) Randomise the epoch and starting client conn ID values, and don't change the epoch when the client conn ID rolls round. (4) Replace deprecated create_singlethread_workqueue() calls. ==================== Signed-off-by:
-
Haishuang Yan authored
If vxlan_build_skb return err < 0, tx_errors should be also increased. Signed-off-by:
Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Acked-by:
Jiri Benc <jbenc@redhat.com> Signed-off-by:
-
Brenden Blanco authored
Depending on the preempt mode, the bpf_prog stored in xdp_prog may be freed despite the use of call_rcu inside bpf_prog_put. The situation is possible when running in PREEMPT_RCU=y mode, for instance, since the rcu callback for destroying the bpf prog can run even during the bh handling in the mlx4 rx path. Several options were considered before this patch was settled on: Add a napi_synchronize loop in mlx4_xdp_set, which would occur after all of the rings are updated with the new program. This approach has the disadvantage that as the number of rings increases, the speed of update will slow down significantly due to napi_synchronize's msleep(1). Add a new rcu_head in bpf_prog_aux, to be used by a new bpf_prog_put_bh. The action of the bpf_prog_put_bh would be to then call bpf_prog_put later. Those drivers that consume a bpf prog in a bh context (like mlx4) would then use the bpf_prog_put_bh instead when the ring is up. This has the problem of complexity, in maintaining proper refcnts and rcu lists, and would likely be harder to review. In addition, this approach to freeing must be exclusive with other frees of the bpf prog, for instance a _bh prog must not be referenced from a prog array that is consumed by a non-_bh prog. The placement of rcu_read_lock in this patch is functionally the same as putting an rcu_read_lock in napi_poll. Actually doing so could be a potentially controversial change, but would bring the implementation in line with sk_busy_loop (though of course the nature of those two paths is substantially different), and would also avoid future copy/paste problems with future supporters of XDP. Still, this patch does not take that opinionated option. Testing was done with kernels in either PREEMPT_RCU=y or CONFIG_PREEMPT_VOLUNTARY=y+PREEMPT_RCU=n modes, with neither exhibiting any drawback. With PREEMPT_RCU=n, the extra call to rcu_read_lock did not show up in the perf report whatsoever, and with PREEMPT_RCU=y the overhead of rcu_read_lock (according to perf) was the same before/after. In the rx path, rcu_read_lock is eventually called for every packet from netif_receive_skb_internal, so the napi poll call's rcu_read_lock is easily amortized. v2: Remove extra rcu_read_lock in mlx4_en_process_rx_cq body Annotate xdp_prog with __rcu, and convert all usages to rcu_assign or rcu_dereference[_protected] as appropriate. Add explicit mutex lock around rcu_assign instead of xchg loop. Fixes: d576acf0 ("net/mlx4_en: add page recycle to prepare rx ring for tx support") Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Alexei Starovoitov <alexei.starovoitov@gmail.com> Signed-off-by:
Brenden Blanco <bblanco@plumgrid.com> Signed-off-by:
-
David S. Miller authored
Sean Wang says: ==================== net: ethernet: mediatek: add enhancements to RX path Changes since v1: - fix message typos and add coverletter Changes since v2: - split from the previous series for submitting add enhancements as a series targeting 'net-next' and add indents before comments. Changes since v3: - merge the patch using PDMA RX path - fixed the input of mtk_poll_rx is with the remaining budget Changes since v4: - save one wmb and register update when no packet is being handled inside mtk_poll_rx call - fixed incorrect return packet count from mtk_napi_rx ==================== Signed-off-by: -
Sean Wang authored
The patch adds support for aggregating more SKBs feed into NAPI in order to get more benefits from generic receive offload (GRO) by peeking at the RX ring status and moving more packets right before returning from NAPI RX polling handler if NAPI budgets are still available and some packets already present in hardware. Signed-off-by:
Sean Wang <sean.wang@mediatek.com> Signed-off-by:
-
Sean Wang authored
The patch makes move wmb() to outside the loop that could help RX path handling more faster although that RX descriptors aren't freed for DMA to use as soon as possible, but based on my experiment and the result shows it still can reach about 943Mbpis without performance drop that is tested based on the setup with one port using Giga PHY and 256 RX descriptors for DMA to move. Signed-off-by:
-
David S. Miller authored
Joe Perches says: ==================== hso: neatening This seems to be the only code in the kernel that uses macro defines with a trailing underscore. Fix that. ==================== Signed-off-by: -
Joe Perches authored
Use a more common logging style Miscellanea: o Add pr_fmt to prefix each output message o Realign arguments Signed-off-by:
-
Joe Perches authored
Macros that end in an underscore are just odd. Add hso_dbg(level, fmt, ...) and use it everwhere instead. Several uses had additional unnecessary newlines as the macro added a newline. Remove the newline from the macro and add newlines to each use as appropriate. Remove now unused D<digit> macros. Signed-off-by:
-
Woojung Huh authored
Add mdix control through ethtool. Signed-off-by:
Woojung Huh <Woojung.huh@gmail.com> Signed-off-by:
-
Woojung Huh authored
Add STRAP_STATUS defines. Signed-off-by:
-
Woojung Huh authored
Add Microchip Linux Driver Support as maintainer because this driver is maintaining by Microchip. Signed-off-by:
Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by:
-
David S. Miller authored
Vivien Didelot says: ==================== net: dsa: mv88e6xxx: isolate Global2 support Registers of Marvell chips are organized in internal SMI devices. One of them at address 0x1C is called Global2. It provides an extended set of registers, used for interrupt control, EEPROM access, indirect PHY access (to bypass the PHY Polling Unit) and cross-chip setup. Most chips have it, but some others don't (older ones such as 6060). Now that its related code is isolated in mv88e6xxx_g2_* functions, move it to its own global2.c file, making most of its setup code static. Then make its compilation optional, which allows to reduce the size of the mv88e6xxx driver for devices such as home routers embedding Ethernet chips without Global2 support. It is present on most recent chips, thus enable its support by default. Changes in v2: fail probe if GLOBAL2 is required but not enabled. ==================== Signed-off-by: -
Vivien Didelot authored
Since not every chip has a Global2 set of registers, make its support optional, in which case the related functions will return -EOPNOTSUPP. This also allows to reduce the size of the mv88e6xxx driver for devices such as home routers embedding Ethernet chips without Global2 support. It is present on most recent chips, thus enable its support by default. Signed-off-by:
Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by:
-
Vivien Didelot authored
Marvell chips are composed of multiple SMI devices. One of them at address 0x1C is called Global2. It provides an extended set of registers, used for interrupt control, EEPROM access, indirect PHY access (to bypass the PHY Polling Unit) and cross-chip related setup. Most chips have it, but some others don't (older ones such as 6060). Now that its related code is isolated in mv88e6xxx_g2_* functions, move it to its own global2.c file, making most of its setup code static. Document each registers in the meantime. Its compilation can be later avoided for chips without such registers. Signed-off-by:
-
Vivien Didelot authored
Since the mv88e6xxx.c file has been renamed, the driver compiled as a module is called chip.ko instead of mv88e6xxx.ko. Fix this. Fixes: fad09c73 ("net: dsa: mv88e6xxx: rename single-chip support") Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter updates for net-next The following patchset contains Netfilter updates for your net-next tree. Most relevant updates are the removal of per-conntrack timers to use a workqueue/garbage collection approach instead from Florian Westphal, the hash and numgen expression for nf_tables from Laura Garcia, updates on nf_tables hash set to honor the NLM_F_EXCL flag, removal of ip_conntrack sysctl and many other incremental updates on our Netfilter codebase. More specifically, they are: 1) Retrieve only 4 bytes to fetch ports in case of non-linear skb transport area in dccp, sctp, tcp, udp and udplite protocol conntrackers, from Gao Feng. 2) Missing whitespace on error message in physdev match, from Hangbin Liu. 3) Skip redundant IPv4 checksum calculation in nf_dup_ipv4, from Liping Zhang. 4) Add nf_ct_expires() helper function and use it, from Florian Westphal. 5) Replace opencoded nf_ct_kill() call in IPVS conntrack support, also from Florian. 6) Rename nf_tables set implementation to nft_set_{name}.c 7) Introduce the hash expression to allow arbitrary hashing of selector concatenations, from Laura Garcia Liebana. 8) Remove ip_conntrack sysctl backward compatibility code, this code has been around for long time already, and we have two interfaces to do this already: nf_conntrack sysctl and ctnetlink. 9) Use nf_conntrack_get_ht() helper function whenever possible, instead of opencoding fetch of hashtable pointer and size, patch from Liping Zhang. 10) Add quota expression for nf_tables. 11) Add number generator expression for nf_tables, this supports incremental and random generators that can be combined with maps, very useful for load balancing purpose, again from Laura Garcia Liebana. 12) Fix a typo in a debug message in FTP conntrack helper, from Colin Ian King. 13) Introduce a nft_chain_parse_hook() helper function to parse chain hook configuration, this is used by a follow up patch to perform better chain update validation. 14) Add rhashtable_lookup_get_insert_key() to rhashtable and use it from the nft_set_hash implementation to honor the NLM_F_EXCL flag. 15) Missing nulls check in nf_conntrack from nf_conntrack_tuple_taken(), patch from Florian Westphal. 16) Don't use the DYING bit to know if the conntrack event has been already delivered, instead a state variable to track event re-delivery states, also from Florian. 17) Remove the per-conntrack timer, use the workqueue approach that was discussed during the NFWS, from Florian Westphal. 18) Use the netlink conntrack table dump path to kill stale entries, again from Florian. 19) Add a garbage collector to get rid of stale conntracks, from Florian. 20) Reschedule garbage collector if eviction rate is high. 21) Get rid of the __nf_ct_kill_acct() helper. 22) Use ARPHRD_ETHER instead of hardcoded 1 from ARP logger. 23) Make nf_log_set() interface assertive on unsupported families. ==================== Signed-off-by:
-
- 04 Sep, 2016 5 commits
-
-
David Howells authored
Move enum rxrpc_command to sendmsg.c as it's now only used in that file. Signed-off-by:David Howells <dhowells@redhat.com>
-
Bhaktipriya Shridhar authored
The workqueue "afs_lock_manager" queues work item &vnode->lock_work, per vnode. Since there can be multiple vnodes and since their work items can be executed concurrently, alloc_workqueue has been used to replace the deprecated create_singlethread_workqueue instance. The WQ_MEM_RECLAIM flag has been set to ensure forward progress under memory pressure because the workqueue is being used on a memory reclaim path. Since there are fixed number of work items, explicit concurrency limit is unnecessary here. Signed-off-by:
Bhaktipriya Shridhar <bhaktipriya96@gmail.com> Signed-off-by:
-
David Howells authored
Rearrange net/rxrpc/sendmsg.c to be in a more logical order. This makes it easier to follow and eliminates forward declarations. Signed-off-by: -
Bhaktipriya Shridhar authored
The workqueue "afs_callback_update_worker" queues multiple work items viz &vnode->cb_broken_work, &server->cb_break_work which require strict execution ordering. Hence, an ordered dedicated workqueue has been used. Since the workqueue is being used on a memory reclaim path, WQ_MEM_RECLAIM has been set to ensure forward progress under memory pressure. Signed-off-by:
-
David Howells authored
Split the sendmsg code from the packet transmission code (mostly to be found in output.c). Signed-off-by:
-
