- 13 Aug, 2008 12 commits
-
-
Eric Sandeen authored
Looks like somehow xfs got missed in the conversion that took place in e231c2ee, "Convert ERR_PTR(PTR_ERR(p)) instances to ERR_CAST(p) <http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit diff;h=e231c2ee>" SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31757a Signed-off-by:
Eric Sandeen <sandeen@sandeen.net> Acked-by:
David Howells <dhowells@redhat.com> Signed-off-by:
Niv Sardi <xaiki@sgi.com> Signed-off-by:
Christoph Hellwig <hch@infradead.org> Signed-off-by:
Lachlan McIlroy <lachlan@sgi.com>
-
Eric Sandeen authored
Thanks to hch's endian work, INT_GET etc are no longer used, and may as well be removed. INT_SET is still used in the acl code, though. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31756a Signed-off-by:
-
Niv Sardi authored
Move it from the attr code to the transaction code and make the attr code call the new function. We rolltrans is really usefull whenever we want to use rolling transaction, should be generic, it isn't dependent on any part of the attr code anyway. We use this excuse to change all the: if ((error = xfs_attr_rolltrans())) calls into: error = xfs_trans_roll(); if (error) SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31729a Signed-off-by:
-
Christoph Hellwig authored
Add a helper to free the m_fsname/m_rtname/m_logname allocations and use it properly for all mount failure cases. Also switch the allocations for these to kstrdup while we're at it. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31728a Signed-off-by:
David Chinner <david@fromorbit.com> Signed-off-by:
-
Niv Sardi authored
We will need that to be able to calculate the size of log we need for a specific attr (for Create+EA). The local flag is needed so that we can fail if we run into ENOSPC when trying to alloc blocks. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31727a Signed-off-by:
Tim Shimmin <tes@sgi.com> Signed-off-by:
-
David Chinner authored
If we allow incore extent tree allocations to recurse into the filesystem under memory pressure, new delayed allocations through xfs_iomap_write_delay() can deadlock on themselves if memory reclaim tries to write back dirty pages from that inode. It will deadlock in xfs_iomap_write_allocate() trying to take the ilock we already hold. This can also show up as complex ABBA deadlocks when multiple threads are triggering memory reclaim when trying to allocate extents. The main cause of this is the fact that delayed allocation is not done in a transaction, so KM_NOFS is not automatically added to the allocations to prevent this recursion. Mark all allocations done for the incore inode extent tree as KM_NOFS to ensure they never recurse back into the filesystem. Version 2: o KM_NOFS implies KM_SLEEP, so just use KM_NOFS SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31726a Signed-off-by:
-
David Chinner authored
xfs_vtoi() is redundant and only unsed in small sections of code. Replace them with widely used XFS_I() inline and kill xfs_vtoi(). SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31725a Signed-off-by:
-
David Chinner authored
Replace XFS_ITOV() with the new VFS_I() inline. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31724a Signed-off-by:
-
David Chinner authored
Replace XFS_ITOV_NULL() with the new VFS_I() inline. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31722a Signed-off-by:
-
David Chinner authored
In several places we directly convert from the XFS inode to the linux (VFS) inode by a simple deference of ip->i_vnode. We should not do this - a helper function should be used to extract the VFS inode from the XFS inode. Introduce the function VFS_I() to extract the VFS inode from the XFS inode. The name was chosen to match XFS_I() which is used to extract the XFS inode from the VFS inode. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31720a Signed-off-by:
-
Lachlan McIlroy authored
We should not access a buffer after dropping it's reference count otherwise we could race with another thread that releases the final reference count and frees the buffer causing us to access potentially unmapped memory. The bug this change fixes only occured on DEBUG XFS since the offending code was in an ASSERT. SGI-PV: 984429 SGI-Modid: xfs-linux-melb:xfs-kern:31715a Signed-off-by:
-
David Chinner authored
This keeps xfs_lowbit64 as it was since there aren't good generic helpers there ... Patch inspired by Andi Kleen. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31472a Signed-off-by:
Donald Douwsma <donaldd@sgi.com> Signed-off-by:
-
- 11 Aug, 2008 14 commits
-
-
git://git.o-hand.com/linux-mfdLinus Torvalds authored
* 'for-linus' of git://git.o-hand.com/linux-mfd: mfd: tc6393 cleanup and update mfd: have TMIO drivers and subdevices depend on ARM mfd: TMIO MMC driver mfd: driver for the TMIO NAND controller mfd: t7l66 MMC platform data mfd: tc6387 MMC platform data mfd: Fix 7l66 and 6387 according to the new mfd-core API mfd: Fix tc6393 according to the new tmio.h mfd: driver for the TC6387XB TMIO controller. mfd: driver for the T7L66XB TMIO SoC mfd: TMIO MMC structures and accessors.
-
git://jdelvare.pck.nerim.net/jdelvare-2.6Linus Torvalds authored
* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: hwmon: (lm75) Drop legacy i2c driver i2c: correct some size_t printk formats i2c: Check for address business before creating clients i2c: Let users select algorithm drivers manually again i2c: Fix NULL pointer dereference in i2c_new_probed_device i2c: Fix oops on bus multiplexer driver loading
-
git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdogLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: [WATCHDOG] pcwd.c - fix open_allowed type. [WATCHDOG] fix watchdog/ixp4xx_wdt.c compilation [WATCHDOG] fix watchdog/wdt285.c compilation [WATCHDOG] fix watchdog/at91rm9200_wdt.c compilation [WATCHDOG] fix watchdog/shwdt.c compilation [WATCHDOG] fix watchdog/txx9wdt.c compilation [WATCHDOG] MAINTAINERS: remove ZF MACHZ WATCHDOG entry [WATCHDOG] Fix build with CONFIG_ITCO_VENDOR_SUPPORT=n
-
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpcLinus Torvalds authored
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: powerpc: Remove include/linux/harrier_defs.h powerpc: Do not ignore arch/powerpc/include powerpc: Delete completed "ppc removal" task from feature removal file powerpc/mm: Fix attribute confusion with htab_bolt_mapping() powerpc/pci: Don't keep ISA memory hole resources in the tree powerpc: Zero fill the return values of rtas argument buffer powerpc/4xx: Update defconfig files for 2.6.27-rc1 powerpc/44x: Incorrect NOR offset in Warp DTS powerpc/44x: Warp DTS changes for board updates powerpc/4xx: Cleanup Warp for i2c driver changes. powerpc/44x: Adjust warp-nand resource end address
-
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI: Limit VPD length for Broadcom 5708S PCI PM: Export pci_pme_active to drivers PCI: remove duplicate symbol from pci_ids.h PCI: check the return value of device_create_bin_file() in pci_create_bus() PCI: fully restore MSI state at resume time DMA: make dma-coherent.c documentation kdoc-friendly PCI: make pci_register_driver() a macro PCI: add Broadcom 5708S to VPD length quirk
-
Christian Borntraeger authored
While testing our KVM code for s390 (starting and killall kvm in a loop) I can reproduce the following oops: Unable to handle kernel pointer dereference at virtual kernel address 6b6b6b6b6b6b6000 Oops: 0038 [#1] SMP Modules linked in: dm_multipath sunrpc qeth_l3 qeth_l2 dm_mod qeth ccwgroup CPU: 1 Not tainted 2.6.27-rc1 #54 Process kuli (pid: 4409, task: 00000000b6aa5940, ksp: 00000000b7343e10) Krnl PSW : 0704e00180000000 00000000002e0b8c (disassociate_ctty+0x1c0/0x288) R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:2 PM:0 EA:3 Krnl GPRS: 0000000000000000 6b6b6b6b6b6b6b6b 0000000000000001 00000000000003a6 00000000002e0a46 00000000004b4160 0000000000000001 00000000bbd79758 00000000b7343e58 00000000b8854148 00000000bd34dea0 00000000b7343c20 0000000000000001 00000000004b6d08 00000000002e0a46 00000000b7343c20 Krnl Code: 00000000002e0b7e: eb9fb0a00004 lmg %r9,%r15,160(%r11) 00000000002e0b84: 07f4 bcr 15,%r4 00000000002e0b86: e31090080004 lg %r1,8(%r9) >00000000002e0b8c: d501109cd000 clc 156(2,%r1),0(%r13) 00000000002e0b92: a784ff5d brc 8,2e0a4c 00000000002e0b96: b9040029 lgr %r2,%r9 00000000002e0b9a: c0e5fffff9c3 brasl %r14,2dff20 00000000002e0ba0: a7f4ff56 brc 15,2e0a4c Call Trace: ([<00000000002e0a46>] disassociate_ctty+0x7a/0x288) [<0000000000141fe6>] do_exit+0x212/0x8d4 [<0000000000142708>] do_group_exit+0x60/0xcc [<0000000000150660>] get_signal_to_deliver+0x270/0x3ac [<000000000010bfd6>] do_signal+0x8e/0x8dc [<0000000000113772>] sysc_sigpending+0xe/0x22 [<000001ff0000b134>] 0x1ff0000b134 INFO: lockdep is turned off. Last Breaking-Event-Address: [<00000000002e0a48>] disassociate_ctty+0x7c/0x288 Kernel panic - not syncing: Fatal exception: panic_on_oops It seems that tty was already free in disassocate_ctty when it tries to dereference tty->driver. After moving the lock_kernel before the mutex_unlock, I can no longer reproduce the problem. [ This is a temporary partial fix for the documented and long standing race in disassociate_tty. This stops most problem cases for now. For the next release the -next tree has an initial implementation of kref counting for tty structures and this quickfix will be dropped. - Alan ] Signed-off-by:Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by; Alan Cox <alan@redhat.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Geert Uytterhoeven authored
Wire up for m68k{,nommu} the system calls that were added in the last merge window: - 4006553b ("flag parameters: inotify_init") - ed8cae8b ("flag parameters: pipe") - 336dd1f7 ("flag parameters: dup2") - a0998b50 ("flag parameters: epoll_create") - 9fe5ad9c ("flag parameters add-on: remove epoll_create size param") - b087498e ("flag parameters: eventfd") - 9deb27ba ("flag parameters: signalfd") Signed-off-by:Geert Uytterhoeven <geert@linux-m68k.org> Acked-by:
Greg Ungerer <gerg@uclinux.org> Signed-off-by:
-
Linus Torvalds authored
This reverts commit 2d04a4a7, which made it impossible to make the softcursor use the highlight colors. Yes, the fourth bit should be "blinking", but since we cannot reasonably blink in fbcon, highlighting it with a bright background is preferable. Reported-by:
Pavel Machek <pavel@suse.cz> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Cc: Antonino A. Daplas <adaplas@pol.net> Signed-off-by:
-
Paul Mackerras authored
It was only used by code in arch/ppc, and arch/ppc is gone, so remove the unused harrier_defs.h as well. Signed-off-by:Paul Mackerras <paulus@samba.org>
-
Junio C Hamano authored
Back when .gitignore file was added to arch/powerpc/ in 06f2138e ([POWERPC] Add files build to .gitignore, 2006-11-26), there indeed was nothing tracked in the ignored hierarchy and ignoring everything made sense. But we have very many tracked files there these days, and having a higher level .gitignore that ignores everything is asking for future troubles.. This should have been part of b8b572e1 (powerpc: Move include files to arch/powerpc/include/asm, 2008-08-01). Signed-off-by:
Junio C Hamano <gitster@pobox.com> Acked-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
Robert P. J. Day authored
Signed-off-by:
Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by:
-
Benjamin Herrenschmidt authored
The function htab_bolt_mapping() is used to create permanent mappings in the MMU hash table, for example, in order to create the linear mapping of vmemmap. It's also used by early boot ioremap (before mem_init_done). However, the way ioremap uses it is incorrect as it passes it the protection flags in the "linux PTE" form while htab_bolt_mapping() expects them in the hash table format. This is made more confusing by the fact that some of those flags are actually in the same position in both cases. This fixes it all by making htab_bolt_mapping() take normal linux protection flags instead, and use a little helper to convert them to htab flags. Callers can now use the usual PAGE_* definitions safely. Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> arch/powerpc/include/asm/mmu-hash64.h | 2 - arch/powerpc/mm/hash_utils_64.c | 65 ++++++++++++++++++++-------------- arch/powerpc/mm/init_64.c | 9 +--- 3 files changed, 44 insertions(+), 32 deletions(-) Signed-off-by:
-
Benjamin Herrenschmidt authored
When we have an ISA memory hole (ie, a PCI window that allows us to generate PCI memory cycles at low PCI address) mixed with other resources using a different CPU <=> PCI mapping, we must not keep the ISA hole in the bridge resource list. If we do, things might start trying to allocate device resources in there and will get the PCI addresses wrong. This fixes it by arranging to remove the ISA memory hole resource in this case. This fixes various cases of PCMCIA breakage on PowerBooks using the MPC106 "grackle" bridge. Signed-off-by:
-
Nathan Fontenot authored
The kernel copy of the rtas args struct contains the return value(s) for the specified rtas call. These are copied back to user space with the assumption that every value has been set by the rtas call, which turns out to be not always true. Thus userspace can see random values and think the call failed when in fact it succeeded, but for some reason didn't set one of the return values. This fixes the problem by zeroing out the return value fields of the rtas args struct before processing the rtas call. Signed-off-by:
Nathan Fontenot <nfont@austin.ibm.com> Signed-off-by:
-
- 10 Aug, 2008 14 commits
-
-
Wim Van Sebroeck authored
Fix following warnings: drivers/watchdog/pcwd.c: In function 'pcwd_open': drivers/watchdog/pcwd.c:703: warning: passing argument 2 of 'test_and_set_bit' from incompatible pointer type drivers/watchdog/pcwd.c: In function 'pcwd_close': drivers/watchdog/pcwd.c:723: warning: passing argument 2 of 'clear_bit' from incompatible pointer type Signed-off-by:Wim Van Sebroeck <wim@iguana.be>
-
Ian Molton authored
This patchset cleans up the TC6393XB support. * Add provision for the MMC subdevice * Disable / enable clocks on suspend / resume * Remove fragments of badly merged code (eg. linux/fb include etc.) * Use a device specific clock name to break dependancy on ARM/PXA2XX * Drop unnecessary resource names * Switch to tmio_io* accessors Signed-off-by:
Ian Molton <spyro@f2s.com> Signed-off-by:
Samuel Ortiz <sameo@openedhand.com>
-
Samuel Ortiz authored
The TMIO chips are only found (and thus tested) on ARM machines. Moreover, we don't want the TMIO cells to be built if one of the TMIO driver is not selected (which indirectly make the TMIO cells drivers depend on ARM as well). Signed-off-by: -
Ian Molton authored
This patch adds support for the MMC subdevice 'cell' commonly found in TMIO based MFDs. Signed-off-by:
Pierre Ossman <drzeus@drzeus.cx> Signed-off-by:
-
Ian Molton authored
This patch adds support for the NAND controller commonly found in TMIO based MFDs. Signed-off-by:
David Woodhouse <David.Woodhouse@intel.com> Signed-off-by:
-
Jean Delvare authored
Drop the legacy lm75 driver, and add a detect callback to the new-style driver to achieve the same functionality. Signed-off-by:Jean Delvare <khali@linux-fr.org> Cc: David Brownell <david-b@pacbell.net>
-
David Brownell authored
Fix various printk format strings where %zd was passed a size_t; those should be %zu instead. (Courtesy of a version of GCC which warns when these details are wrong.) Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
-
Jean Delvare authored
We check for address business in i2c_probe_address(), i2c_detect_address() and i2c_new_probed_device(), but this isn't sufficient. Drivers can call i2c_attach_client() and i2c_new_device() on any address, so we must check the address there as well. This fixes bug #11239: http://bugzilla.kernel.org/show_bug.cgi?id=11239Signed-off-by:
-
Jean Delvare authored
In kernel 2.6.26, the ability to select I2C algorithm drivers manually was removed, as all in-kernel drivers do that automatically. However there were some complaints that it was a problem for out-of-tree I2C bus drivers. In order to address these complaints, let's allow manual selection of these drivers again, but still hide them by default for better general user experience. This closes bug #11140: http://bugzilla.kernel.org/show_bug.cgi?id=11140Signed-off-by:
-
Hans Verkuil authored
Fix a NULL pointer dereference that happened when calling i2c_new_probed_device on one of the addresses for which we use byte reads instead of quick write for detection purpose (that is: 0x30-0x37 and 0x50-0x5f). Signed-off-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
-
Jean Delvare authored
The two I2C bus multiplexer drivers (i2c-amd756-s4882 and i2c-nforce2-s4985) make use of the bus they want to multiplex before checking if it is really present. Swap the instructions to test for presence first. This fixes a oops reported by Ingo Molnar. Signed-off-by: -
Adrian Bunk authored
This patch fixes the following compile error caused by commit 20d35f3e ([WATCHDOG 22/57] ixp4xx_wdt: unlocked_ioctl): <-- snip --> ... CC drivers/watchdog/ixp4xx_wdt.o ixp4xx_wdt.c:32: error: expected '=', ',', ';', 'asm' or '__attribute__' ixp4xx_wdt.c: In function 'wdt_enable': ixp4xx_wdt.c:41: error: 'wdt_lock' undeclared (first use in this ixp4xx_wdt.c:41: error: (Each undeclared identifier is reported only ixp4xx_wdt.c:41: error: for each function it appears in.) ixp4xx_wdt.c: In function 'wdt_disable': ixp4xx_wdt.c:52: error: 'wdt_lock' undeclared (first use in this ixp4xx_wdt.c: In function 'ixp4xx_wdt_init': ixp4xx_wdt.c:186: error: 'wdt_lock' undeclared (first use in this make[3]: *** [drivers/watchdog/ixp4xx_wdt.o] Error 1 <-- snip --> Reported-by:
Adrian Bunk <bunk@kernel.org> Signed-off-by:
-
Adrian Bunk authored
This patch fixes the following compile error caused by commit d0e58eed ([WATCHDOG 55/57] wdt285: switch to unlocked_ioctl and tidy up ...): <-- snip --> ... CC [M] drivers/watchdog/wdt285.o wdt285.c: In function 'footbridge_watchdog_init': wdt285.c:211: error: 'KERN_WARN' undeclared (first use in this function) wdt285.c:211: error: (Each undeclared identifier is reported only once wdt285.c:211: error: for each function it appears in.) wdt285.c:212: error: expected ')' before string constant make[3]: *** [drivers/watchdog/wdt285.o] Error 1 <-- snip --> Reported-by:
-
Adrian Bunk authored
This patch fixes the following compile error: <-- snip --> ... CC drivers/watchdog/at91rm9200_wdt.o at91rm9200_wdt.c:188: error: 'at91_wdt_ioctl' undeclared here (not in a make[3]: *** [drivers/watchdog/at91rm9200_wdt.o] Error 1 <-- snip --> Reported-by:
-
