The cisco.com address will stop working soon, and besides no one can
remember the second "d" in "rolandd" or how to spell "rdreier."
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6:
  quota: Fix deadlock during path resolution

Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  smp: Allow on_each_cpu() to be called while early_boot_irqs_disabled status to init/main.c
  lockdep: Move early boot local IRQ enable/disable status to init/main.c

It turns out that some device drivers map pages from the ACPI NVS region
during resume using ioremap(), which conflicts with ioremap_cache() used
for mapping those pages by the NVS save/restore code in nvs.c.

Make the NVS pages mapped by the code in nvs.c be unmapped before device
drivers' resume routines run.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit ca9b600b ("ACPI / PM: Make suspend_nvs_save() use
acpi_os_map_memory()") attempted to prevent the code in osl.c and nvs.c
from using different ioremap() variants by making the latter use
acpi_os_map_memory() for mapping the NVS pages.  However, that also
requires acpi_os_unmap_memory() to be used for unmapping them, which
causes synchronize_rcu() to be executed many times in a row
unnecessarily and introduces substantial delays during resume on some
systems.

Instead of using acpi_os_map_memory() for mapping the NVS pages in nvs.c
introduce acpi_os_ioremap() calling ioremap_cache() and make the code in
both osl.c and nvs.c use it.
Reported-by: Jeff Chua <jeff.chua.linux@gmail.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* akpm:
  kernel/smp.c: consolidate writes in smp_call_function_interrupt()
  kernel/smp.c: fix smp_call_function_many() SMP race
  memcg: correctly order reading PCG_USED and pc->mem_cgroup
  backlight: fix 88pm860x_bl macro collision
  drivers/leds/ledtrig-gpio.c: make output match input, tighten input checking
  MAINTAINERS: update Atmel AT91 entry
  mm: fix truncate_setsize() comment
  memcg: fix rmdir, force_empty with THP
  memcg: fix LRU accounting with THP
  memcg: fix USED bit handling at uncharge in THP
  memcg: modify accounting function for supporting THP better
  fs/direct-io.c: don't try to allocate more than BIO_MAX_PAGES in a bio
  mm: compaction: prevent division-by-zero during user-requested compaction
  mm/vmscan.c: remove duplicate include of compaction.h
  memblock: fix memblock_is_region_memory()
  thp: keep highpte mapped until it is no longer needed
  kconfig: rename CONFIG_EMBEDDED to CONFIG_EXPERT

We have to test the cpu mask in the interrupt handler before checking the
refs, otherwise we can start to follow an entry before its deleted and
find it partially initailzed for the next trip.  Presently we also clear
the cpumask bit before executing the called function, which implies
getting write access to the line.  After the function is called we then
decrement refs, and if they go to zero we then unlock the structure.

However, this implies getting write access to the call function data
before and after another the function is called.  If we can assert that no
smp_call_function execution function is allowed to enable interrupts, then
we can move both writes to after the function is called, hopfully allowing
both writes with one cache line bounce.

On a 256 thread system with a kernel compiled for 1024 threads, the time
to execute testcase in the "smp_call_function_many race" changelog was
reduced by about 30-40ms out of about 545 ms.

I decided to keep this as WARN because its now a buggy function, even
though the stack trace is of no value -- a simple printk would give us the
information needed.

Raw data:

Without patch:
  ipi_test startup took 1219366ns complete 539819014ns total 541038380ns
  ipi_test startup took 1695754ns complete 543439872ns total 545135626ns
  ipi_test startup took 7513568ns complete 539606362ns total 547119930ns
  ipi_test startup took 13304064ns complete 533898562ns total 547202626ns
  ipi_test startup took 8668192ns complete 544264074ns total 552932266ns
  ipi_test startup took 4977626ns complete 548862684ns total 553840310ns
  ipi_test startup took 2144486ns complete 541292318ns total 543436804ns
  ipi_test startup took 21245824ns complete 530280180ns total 551526004ns

With patch:
  ipi_test startup took 5961748ns complete 500859628ns total 506821376ns
  ipi_test startup took 8975996ns complete 495098924ns total 504074920ns
  ipi_test startup took 19797750ns complete 492204740ns total 512002490ns
  ipi_test startup took 14824796ns complete 487495878ns total 502320674ns
  ipi_test startup took 11514882ns complete 494439372ns total 505954254ns
  ipi_test startup took 8288084ns complete 502570774ns total 510858858ns
  ipi_test startup took 6789954ns complete 493388112ns total 500178066ns

	#include <linux/module.h>
	#include <linux/init.h>
	#include <linux/sched.h> /* sched clock */

	#define ITERATIONS 100

	static void do_nothing_ipi(void *dummy)
	{
	}

	static void do_ipis(struct work_struct *dummy)
	{
		int i;

		for (i = 0; i < ITERATIONS; i++)
			smp_call_function(do_nothing_ipi, NULL, 1);

		printk(KERN_DEBUG "cpu %d finished\n", smp_processor_id());
	}

	static struct work_struct work[NR_CPUS];

	static int __init testcase_init(void)
	{
		int cpu;
		u64 start, started, done;

		start = local_clock();
		for_each_online_cpu(cpu) {
			INIT_WORK(&work[cpu], do_ipis);
			schedule_work_on(cpu, &work[cpu]);
		}
		started = local_clock();
		for_each_online_cpu(cpu)
			flush_work(&work[cpu]);
		done = local_clock();
		pr_info("ipi_test startup took %lldns complete %lldns total %lldns\n",
			started-start, done-started, done-start);

		return 0;
	}

	static void __exit testcase_exit(void)
	{
	}

	module_init(testcase_init)
	module_exit(testcase_exit)
	MODULE_LICENSE("GPL");
	MODULE_AUTHOR("Anton Blanchard");
Signed-off-by: Milton Miller <miltonm@bga.com>
Cc: Anton Blanchard <anton@samba.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

I noticed a failure where we hit the following WARN_ON in
generic_smp_call_function_interrupt:

                if (!cpumask_test_and_clear_cpu(cpu, data->cpumask))
                        continue;

                data->csd.func(data->csd.info);

                refs = atomic_dec_return(&data->refs);
                WARN_ON(refs < 0);      <-------------------------

We atomically tested and cleared our bit in the cpumask, and yet the
number of cpus left (ie refs) was 0.  How can this be?

It turns out commit 54fdade1
("generic-ipi: make struct call_function_data lockless") is at fault.  It
removes locking from smp_call_function_many and in doing so creates a
rather complicated race.

The problem comes about because:

 - The smp_call_function_many interrupt handler walks call_function.queue
   without any locking.
 - We reuse a percpu data structure in smp_call_function_many.
 - We do not wait for any RCU grace period before starting the next
   smp_call_function_many.

Imagine a scenario where CPU A does two smp_call_functions back to back,
and CPU B does an smp_call_function in between.  We concentrate on how CPU
C handles the calls:

CPU A            CPU B                  CPU C              CPU D

smp_call_function
                                        smp_call_function_interrupt
                                            walks
					call_function.queue sees
					data from CPU A on list

                 smp_call_function

                                        smp_call_function_interrupt
                                            walks

                                        call_function.queue sees
                                          (stale) CPU A on list
							   smp_call_function int
							   clears last ref on A
							   list_del_rcu, unlock
smp_call_function reuses
percpu *data A
                                         data->cpumask sees and
                                         clears bit in cpumask
                                         might be using old or new fn!
                                         decrements refs below 0

set data->refs (too late!)

The important thing to note is since the interrupt handler walks a
potentially stale call_function.queue without any locking, then another
cpu can view the percpu *data structure at any time, even when the owner
is in the process of initialising it.

The following test case hits the WARN_ON 100% of the time on my PowerPC
box (having 128 threads does help :)

#include <linux/module.h>
#include <linux/init.h>

#define ITERATIONS 100

static void do_nothing_ipi(void *dummy)
{
}

static void do_ipis(struct work_struct *dummy)
{
	int i;

	for (i = 0; i < ITERATIONS; i++)
		smp_call_function(do_nothing_ipi, NULL, 1);

	printk(KERN_DEBUG "cpu %d finished\n", smp_processor_id());
}

static struct work_struct work[NR_CPUS];

static int __init testcase_init(void)
{
	int cpu;

	for_each_online_cpu(cpu) {
		INIT_WORK(&work[cpu], do_ipis);
		schedule_work_on(cpu, &work[cpu]);
	}

	return 0;
}

static void __exit testcase_exit(void)
{
}

module_init(testcase_init)
module_exit(testcase_exit)
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Anton Blanchard");

I tried to fix it by ordering the read and the write of ->cpumask and
->refs.  In doing so I missed a critical case but Paul McKenney was able
to spot my bug thankfully :) To ensure we arent viewing previous
iterations the interrupt handler needs to read ->refs then ->cpumask then
->refs _again_.

Thanks to Milton Miller and Paul McKenney for helping to debug this issue.

[miltonm@bga.com: add WARN_ON and BUG_ON, remove extra read of refs before initial read of mask that doesn't help (also noted by Peter Zijlstra), adjust comments, hopefully clarify scenario ]
[miltonm@bga.com: remove excess tests]
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Milton Miller <miltonm@bga.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: <stable@kernel.org> [2.6.32+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The placement of the read-side barrier is confused: the writer first
sets pc->mem_cgroup, then PCG_USED.  The read-side barrier has to be
between testing PCG_USED and reading pc->mem_cgroup.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix collision with kernel-supplied #define:

  drivers/video/backlight/88pm860x_bl.c:24:1: warning: "CURRENT_MASK" redefined
  arch/x86/include/asm/page_64_types.h:6:1: warning: this is the location of the previous definition
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Haojian Zhuang <haojian.zhuang@marvell.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Replicate changes made to drivers/leds/ledtrig-backlight.c.

Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Add two co-maintainers and update the entry with new information.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Contrary to what the comment says, truncate_setsize() should be called
*before* filesystem truncated blocks.
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Now, when THP is enabled, memcg's rmdir() function is broken because
move_account() for THP page is not supported.

This will cause account leak or -EBUSY issue at rmdir().
This patch fixes the issue by supporting move_account() THP pages.
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

memory cgroup's LRU stat should take care of size of pages because
Transparent Hugepage inserts hugepage into LRU.  If this value is the
number wrong, memory reclaim will not work well.

Note: only head page of THP's huge page is linked into LRU.
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Now, under THP:

at charge:
  - PageCgroupUsed bit is set to all page_cgroup on a hugepage.
    ....set to 512 pages.
at uncharge
  - PageCgroupUsed bit is unset on the head page.

So, some pages will remain with "Used" bit.

This patch fixes that Used bit is set only to the head page.
Used bits for tail pages will be set at splitting if necessary.

This patch adds this lock order:
   compound_lock() -> page_cgroup_move_lock().

[akpm@linux-foundation.org: fix warning]
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mem_cgroup_charge_statisics() was designed for charging a page but now, we
have transparent hugepage.  To fix problems (in following patch) it's
required to change the function to get the number of pages as its
arguments.

The new function gets following as argument.
  - type of page rather than 'pc'
  - size of page which is accounted.
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When using devices that support max_segments > BIO_MAX_PAGES (256), direct
IO tries to allocate a bio with more pages than allowed, which leads to an
oops in dio_bio_alloc().  Clamp the request to the supported maximum, and
change dio_bio_alloc() to reflect that bio_alloc() will always return a
bio when called with __GFP_WAIT and a valid number of vectors.

[akpm@linux-foundation.org: remove redundant BUG_ON()]
Signed-off-by: David Dillow <dillowda@ornl.gov>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Up until 3e7d3449 ("mm: vmscan: reclaim order-0 and use compaction instead
of lumpy reclaim"), compaction skipped calculating the fragmentation index
of a zone when compaction was explicitely requested through the procfs
knob.

However, when compaction_suitable was introduced, it did not come with an
extra check for order == -1, set on explicit compaction requests, and
passed this order on to the fragmentation index calculation, where it
overshifts the number of requested pages, leading to a division by zero.

This patch makes sure that order == -1 is recognized as the flag it is
rather than passing it along as valid order parameter.

[akpm@linux-foundation.org: add comment, per Mel]
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

memblock_is_region_memory() uses reserved memblocks to search for the
given region, while it should use the memory memblocks.

I encountered the problem with OMAP's framebuffer ram allocation.
Normally the ram is allocated dynamically, and this function is not
called.  However, if we want to pass the framebuffer from the bootloader
to the kernel (to retain the boot image), this function is used to check
the validity of the kernel parameters for the framebuffer ram area.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
Acked-by: Yinghai Lu <yinghai@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Two users reported THP-related crashes on 32-bit x86 machines.  Their oops
reports indicated an invalid pte, and subsequent code inspection showed
that the highpte is actually used after unmap.

The fix is to unmap the pte only after all operations against it are
finished.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reported-by: Ilya Dryomov <idryomov@gmail.com>
Reported-by: werner <w.landgraf@ru.ru>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Tested-by: Ilya Dryomov <idryomov@gmail.com>
Tested-by: Steven Rostedt <rostedt@goodmis.org
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The meaning of CONFIG_EMBEDDED has long since been obsoleted; the option
is used to configure any non-standard kernel with a much larger scope than
only small devices.

This patch renames the option to CONFIG_EXPERT in init/Kconfig and fixes
references to the option throughout the kernel.  A new CONFIG_EMBEDDED
option is added that automatically selects CONFIG_EXPERT when enabled and
can be used in the future to isolate options that should only be
considered for embedded systems (RISC architectures, SLOB, etc).

Calling the option "EXPERT" more accurately represents its intention: only
expert users who understand the impact of the configuration changes they
are making should enable it.
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Acked-by: David Woodhouse <david.woodhouse@intel.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Greg KH <gregkh@suse.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Robin Holt <holt@sgi.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'tty-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6:
  tty: update MAINTAINERS file due to driver movement
  tty: move drivers/serial/ to drivers/tty/serial/
  tty: move hvc drivers to drivers/tty/hvc/

Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sched, cgroup: Use exit hook to avoid use-after-free crash
  sched: Fix signed unsigned comparison in check_preempt_tick()
  sched: Replace rq->bkl_count with rq->rq_sched_info.bkl_count
  sched, autogroup: Fix CONFIG_RT_GROUP_SCHED sched_setscheduler() failure
  sched: Display autogroup names in /proc/sched_debug
  sched: Reinstate group names in /proc/sched_debug
  sched: Update effective_load() to use global share weights

* 'xen/xenbus' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen:
  xenbus: Fix memory leak on release
  xenbus: avoid zero returns from read()
  xenbus: add missing wakeup in concurrent read/write
  xenbus: allow any xenbus command over /proc/xen/xenbus
  xenfs/xenbus: report partial reads/writes correctly

* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  cifs: mangle existing header for SMB_COM_NT_CANCEL
  cifs: remove code for setting timeouts on requests
  [CIFS] cifs: reconnect unresponsive servers
  cifs: set up recurring workqueue job to do SMB echo requests
  cifs: add ability to send an echo request
  cifs: add cifs_call_async
  cifs: allow for different handling of received response
  cifs: clean up sync_mid_result
  cifs: don't reconnect server when we don't get a response
  cifs: wait indefinitely for responses
  cifs: Use mask of ACEs for SID Everyone to calculate all three permissions user, group, and other
  cifs: Fix regression during share-level security mounts (Repost)
  [CIFS] Update cifs version number
  cifs: move mid result processing into common function
  cifs: move locked sections out of DeleteMidQEntry and AllocMidQEntry
  cifs: clean up accesses to midCount
  cifs: make wait_for_free_request take a TCP_Server_Info pointer
  cifs: no need to mark smb_ses_list as cifs_demultiplex_thread is exiting
  cifs: don't fail writepages on -EAGAIN errors
  CIFS: Fix oplock break handling (try #2)

* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
  virtio: remove virtio-pci root device
  LGUEST_GUEST: fix unmet direct dependencies (VIRTUALIZATION && VIRTIO)
  lguest: compile fixes
  lguest: Use this_cpu_ops
  lguest: document --rng in example Launcher
  lguest: example launcher to use guard pages, drop PROT_EXEC, fix limit logic
  lguest: --username and --chroot options

* 'for-38-rc2' of git://codeaurora.org/quic/kernel/davidb/linux-msm:
  msm: qsd8x50: Platform data isn't init data

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6:
  trusted-keys: avoid scattring va_end()
  trusted-keys: check for NULL before using it
  trusted-keys: another free memory bugfix
  trusted-keys: free memory bugfix

* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes:
  GFS2: Fix error path in gfs2_lookup_by_inum()
  GFS2: remove iopen glocks from cache on failed deletes

* 'acpica' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
  ACPICA: Update version to 20110112
  ACPICA: Update all ACPICA copyrights and signons to 2011
  ACPICA: Fix issues/fault with automatic "serialized" method support
  ACPICA: Debugger: Lock namespace for duration of a namespace dump
  ACPICA: Fix namespace race condition
  ACPICA: Fix memory leak in acpi_ev_asynch_execute_gpe_method().

Commit e462c448 ("pipe: use event aware wakeups") optimized the pipe
event wakeup calls to avoid wakeups if the events do not match the
requested set.

However, the optimization was buggy, in that it didn't actually use the
correct sets for the events: when we make room for more data to be
written, the pipe poll() routine will return both the POLLOUT _and_
POLLWRNORM bits.  Similarly for read.

And most critically, when a pipe is released, that will potentially
result in POLLHUP|POLLERR (depending on whether it was the last reader
or writer), not just the regular POLLIN|POLLOUT.

This bug showed itself as a hung gnome-screensaver-dialog process, stuck
forever (or at least until it was poked by a signal or by being traced)
in a poll() system call.

Cc: Davide Libenzi <davidel@xmailserver.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

During system suspend, the "wait for ring buffer to empty" loop would
always time out after three seconds, because the faster cached ring
buffer head read would always return zero.  Force the slow-and-careful
PIO read on all but the first iterations of the loop to fix it.

This also removes the unused (and useless) 'actual_head' variable that
tried to approximate doing this, but did it incorrectly.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Dave Airlie <airlied@linux.ie>
Cc: DRI mailing list <dri-devel@lists.freedesktop.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This partially reverts commit da8aeb92
("ACPI / Battery: Update information on info notification and resume"),
which causes a hang on resume on at least some machines.

This bug was bisected on an ASUS EeePC 901, which hangs at resume time
if we do that "acpi_battery_refresh(battery)" in the battery resume
function.

Rafael suspects we'll still need to refresh the sysfs files upon resume,
but that that can be done from a PM notifier (that will run after
thawing user space).
Bisected-and-tested-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Len Brown <len.brown@intel.com>
Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The NT_CANCEL command looks just like the original command, except for a
few small differences. The send_nt_cancel function however currently takes
a tcon, which we don't have in SendReceive and SendReceive2.

Instead of "respinning" the entire header for an NT_CANCEL, just mangle
the existing header by replacing just the fields we need. This means we
don't need a tcon and allows us to call it from other places.
Reviewed-by: Pavel Shilovsky <piastryyy@gmail.com>
Reviewed-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>

Since we don't time out individual requests anymore, remove the code
that we used to use for setting timeouts on different requests.
Reviewed-by: Pavel Shilovsky <piastryyy@gmail.com>
Reviewed-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>

If the server isn't responding to echoes, we don't want to leave tasks
hung waiting for it to reply. At that point, we'll want to reconnect
so that soft mounts can return an error to userspace quickly.

If the client hasn't received a reply after a specified number of echo
intervals, assume that the transport is down and attempt to reconnect
the socket.

The number of echo_intervals to wait before attempting to reconnect is
tunable via a module parameter. Setting it to 0, means that the client
will never attempt to reconnect. The default is 5.
Signed-off-by: Jeff Layton <jlayton@redhat.com>

Reviewed-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>

Reviewed-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>