- 10 Jul, 2006 1 commit
-
-
Steven Whitehouse authored
Remove a couple of commented out, and unused lines of code. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
-
- 06 Jul, 2006 30 commits
-
-
Steven Whitehouse authored
This really is the correct fix this time. We just ignore all glocks associated with inodes until the inodes are pushed from the inode cache. At that point the glocks are queued for reclaim, so we don't need to do it here. Also fix one or two other minor bugs. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
-
Steven Whitehouse authored
-
Linus Torvalds authored
It's all good.
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [PKT_SCHED]: Fix error handling while dumping actions [PKT_SCHED]: Return ENOENT if action module is unavailable [PKT_SCHED]: Fix illegal memory dereferences when dumping actions
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC64]: Fix stack overflow checking in modular non-SMP kernels. [SPARC64]: Fix sparc64 build errors when CONFIG_PCI=n.
-
Thomas Graf authored
"return -err" and blindly inheriting the error code in the netlink failure exception handler causes errors codes to be returned as positive value therefore making them being ignored by the caller. May lead to sending out incomplete netlink messages. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Thomas Graf authored
Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Thomas Graf authored
The TCA_ACT_KIND attribute is used without checking its availability when dumping actions therefore leading to a value of 0x4 being dereferenced. The use of strcmp() in tc_lookup_action_n() isn't safe when fed with string from an attribute without enforcing proper NUL termination. Both bugs can be triggered with malformed netlink message and don't require any privileges. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mikael Pettersson authored
The sparc64 kernel's EXPORT_SYMBOL(_mcount) is inside an #ifdef CONFIG_SMP. This breaks modules in non-SMP kernels built with stack overflow checking (CONFIG_STACK_DEBUG=y), as modules_install reports: WARNING: /lib/modules/2.6.17/kernel/drivers/ide/ide-cd.ko needs unknown symbol _mcount Trivially fixed by moving EXPORT_SYMBOL(_mcount) outside of the #ifdef CONFIG_SMP. Signed-off-by: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Linus Torvalds authored
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: [PCI] Add JMicron PCI ID constants [PATCH] ahci: Ensure that we don't grab both functions [PATCH] libata-core.c: restore configuration boot messages in ata_dev_configure(), v2 [PATCH] sata_sil24: add suspend/sleep support [PATCH] sata_sil24: separate out sil24_init_controller() [PATCH] sata_sil: add suspend/sleep support [PATCH] sata_sil: separate out sil_init_controller() [PATCH] libata: reimplement controller-wide PM [PATCH] libata: reimplement per-dev PM [PATCH] libata: implement PM EH actions [PATCH] libata: separate out __ata_ehi_hotplugged() [PATCH] libata: implement ATA_EHI_NO_AUTOPSY and QUIET [PATCH] libata: clean up debounce parameters and improve parameter selection [PATCH] libata: implement ATA_EHI_RESUME_LINK [PATCH] libata: replace ap_lock w/ ap->lock in ata_scsi_error() [PATCH] libata: fix ehc->i.action setting in ata_eh_autopsy() [PATCH] libata: add ap->pflags and move core dynamic flags to it [PATCH] libata: Conditionally set host->max_cmd_len [PATCH] sata_vsc: data_xfer should use mmio
-
Randy Dunlap authored
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jeff Garzik authored
They will be used in several IDE/libata files. Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
root authored
When we force the chip into dual fn mode so we get PATA and AHCI we must be sure we don't then do anything dumb like try and grab both with the AHCI driver. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Borislav Petkov authored
This one looks better, IMHO. This restores the default libata configuration messages printed during booting. Signed-off-by: <petkov@math.uni-muenster.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Tejun Heo authored
Add suspend/sleep support. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Tejun Heo authored
Separate out controller initialization from sil24_init_one() into sil24_init_controller(). This will be used by resume. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Tejun Heo authored
Add suspend/sleep support. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Tejun Heo authored
Separate out controller initialization from sil_init_one() into sil_init_controller(). This will be used by resume. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Tejun Heo authored
Reimplement controller-wide PM. ata_host_set_suspend/resume() are defined to suspend and resume a host_set. While suspended, EHs for all ports in the host_set are pegged using ATA_FLAG_SUSPENDED and frozen. Because SCSI device hotplug is done asynchronously against the rest of libata EH and the same mutex is used when adding new device, suspend cannot wait for hotplug to complete. So, if SCSI device hotplug is in progress, suspend fails with -EBUSY. In most cases, host_set resume is followed by device resume. As each resume operation requires a reset, a single host_set-wide resume operation may result in multiple resets. To avoid this, resume waits upto 1 second giving PM to request resume for devices. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Tejun Heo authored
Reimplement per-dev PM. The original implementation directly put the device into suspended mode and didn't synchronize w/ EH operations including hotplug. This patch reimplements ata_scsi_device_suspend() and ata_scsi_device_resume() such that they request EH to perform the respective operations. Both functions synchronize with hotplug such that it doesn't operate on detached devices. Suspend waits for completion but resume just issues request and returns. This allows parallel wake up of devices and thus speeds up system resume. Due to sdev detach synchronization, it's not feasible to separate out EH requesting from sdev handling; thus, ata_device_suspend/resume() are removed and everything is implemented in the respective libata-scsi functions. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Tejun Heo authored
Implement two PM per-dev EH actions - ATA_EH_SUSPEND and ATA_EH_RESUME. Each action puts the target device into suspended mode and resumes from it respectively. Once a device is put to suspended mode, no EH operations other than RESUME is allowed on the device. The device will stay suspended till it gets resumed and thus reset and revalidated. To implement this, a new device state helper - ata_dev_ready() - is implemented and used in EH action implementations to make them operate only on attached & running devices. If all possible devices on a port are suspended, reset is skipped too. This prevents spurious events including hotplug events from disrupting suspended devices. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Tejun Heo authored
Separate out __ata_ehi_hotplugged() from ata_ehi_hotplugged(). The underscored version doesn't set AC_ERR_ATA_BUS. This will be used for resume which is a hotplug event but not an ATA bus error. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Tejun Heo authored
Implement ATA_EHI_NO_AUTOPSY and QUIET. These used to be implied by ATA_PFLAG_LOADING, but new power management and PMP support need to use these separately. e.g. Suspend/resume operations shouldn't print full EH messages and resume shouldn't be recorded as an error. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Tejun Heo authored
The names of predefined debounce timing parameters didn't exactly match their usages. Rename to more generic names and implement param selection helper sata_ehc_deb_timing() which uses EHI_HOTPLUGGED to select params. Combined with the previous EHI_RESUME_LINK differentiation, this makes parameter selection accurate. e.g. user scan resumes link but normal deb param is used instead of hotplug param. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Tejun Heo authored
Implement ATA_EHI_RESUME_LINK, which indicates that the link needs to be resumed. This used to be implied by ATA_EHI_HOTPLUGGED. However, hotplug isn't the only event which requires link resume and separating this out allows other places to request link resume. This differentiation also allows better debounce timing selection. This patch converts user scan to use ATA_EHI_RESUME_LINK. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Tejun Heo authored
ap_lock was used because &ap->host_set->lock was too long and used a lot. Now that &ap->host_set->lock is replaced with ap->lock, there's no reason to keep ap_lock. [ed. note: that's not entirely true. ap_lock is a local variable, caching the results of a de-ref. In theory, if the compiler is smart enough, this patch is cosmetic. However, since this is not a fast path (it is the error path), this patch is nonetheless acceptable, even though it _may_ introduce a performance regression.] Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Tejun Heo authored
ata_eh_autopsy() used to directly assign determined action mask to ehc->i.action thus overriding actions set by some of nested analyze functions. This patch makes ata_eh_autopsy() add action masks just as it's done in other places. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Tejun Heo authored
ap->flags is way too clamped. Separate out core dynamic flags to ap->pflags. ATA_FLAG_DISABLED is a dynamic flag but left alone as it's referenced by a lot of LLDs and it's gonna be removed once all LLDs are converted to new EH. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Brian King authored
In preparation for SAS attached SATA devices, which will not have a libata scsi_host, only setup host->max_cmd_len if ap->host exists. Signed-off-by: Brian King <brking@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Martin Hicks authored
Hi, sata_vsc is an MMIO device, and should use the correct data_xfer function. This problem was introduced by: commit a6b2c5d4 Author: Alan Cox <alan@lxorguk.ukuu.org.uk> Date: Mon May 22 16:59:59 2006 +0100 [PATCH] PATCH: libata. Add ->data_xfer method Signed-off-by: Martin Hicks <mort@bork.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
- 05 Jul, 2006 9 commits
-
-
git://git.linux-nfs.org/pub/linux/nfs-2.6Linus Torvalds authored
* git://git.linux-nfs.org/pub/linux/nfs-2.6: NLM,NFSv4: Wait on local locks before we put RPC calls on the wire VFS: Add support for the FL_ACCESS flag to flock_lock_file() NFSv4: Ensure nfs4_lock_expired() caches delegated locks NLM,NFSv4: Don't put UNLOCK requests on the wire unless we hold a lock VFS: Allow caller to determine if BSD or posix locks were actually freed NFS: Optimise away an excessive GETATTR call when a file is symlinked This fixes a panic doing the first READDIR or READDIRPLUS call when: NFS: Fix NFS page_state usage Revert "Merge branch 'odirect'"
-
Linus Torvalds authored
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 3711/1: AT91 timer update [ARM] 3709/1: pnx4008: convert to generic irq subsystem [ARM] 3710/1: AT91 Serial: Use GPIO API
-
Linus Torvalds authored
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (39 commits) [PATCH] myri10ge - Export more parameters to ethtool [PATCH] myri10ge - Use dev_info() when printing parameters after probe [PATCH] myri10ge - Drop ununsed nvidia chipset id [PATCH] myri10ge - Drop unused pm_state [PATCH] Fix freeing of net device [PATCH] remove dead entry in net wan Kconfig [PATCH] NI5010 netcard cleanup [PATCH] lock validator: fix ns83820.c irq-flags bug [PATCH] pcnet32: Cleanup rx buffers after loopback test. [PATCH] pcnet32: Suspend the chip rather than restart when changing multicast/promisc [PATCH] pcnet32: Handle memory allocation failures cleanly when resizing tx/rx rings [PATCH] pcnet32: Use kcalloc instead of kmalloc and memset [PATCH] pcnet32: Fix off-by-one in get_ringparam [PATCH] pcnet32: Use PCI_DEVICE macro [PATCH] pcnet32: Fix Section mismatch error [PATCH] Add support for the Cicada 8201 PHY [PATCH] zd1211rw: disable TX queue during stop [PATCH] ZyDAS ZD1211 USB-WLAN driver [PATCH] softmac: fix build-break from 881ee6999d66c8fc903b429b73bbe6045b38c549 [PATCH] CONFIG_WIRELESS_EXT is neccessary after all ...
-
Brice Goglin authored
Add the IRQ line, the tx_boundary, and whether Write-combining and MSI are enabled to the list of parameters that are exported to ethtool. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Brice Goglin authored
Displaying the interface name when listing the device parameters at the end of myri10ge_probe is not a good idea since udev might rename the interface soon afterwards. Print the bus id instead, using dev_info(). Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
brice@myri.com authored
The workaround for the AER capability of the nVidia chipset has been removed, we don't need this PCI id anymore. Drop it. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
brice@myri.com authored
The pm_state field in the myri10ge_priv structure is unused. Drop it. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Ralf Baechle authored
Plus optical sugar. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Paul Fulghum authored
Remove dead entry from net wan Kconfig and net wan Makefile.. This entry is left over from 2.4 where synclink used syncppp driver directly. synclink drivers now use generic HDLC Signed-off-by: Paul Fulghum <paulkf@microgate.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-