From: Dave Olien <dmo@osdl.org>

Here's a patch that changes the DAC960 driver from having one request
queue for ALL disks on the controller, to having a request queue for
each logical disk.  This turns out to make little difference for deadline
scheduler, nor for AS scheduler under light IO load.  But under AS
scheduler with heavy IO, it makes about a 40% difference on dbt2
workload.  Here are the measured numbers:

The 2.6.0-test11-D kernel version includes this mutli-queue patch to the
DAC960 driver.

For non-cached dbt2 workload  (heavy IO load)

Scheduler	kernel/driver	NOTPM(bigger is better)
AS		2.6.0-test11-D  1598
AS		2.6.0-test11     973
deadline	2.6.0-test11    1640
deadline	2.6.0-test11-D  1645

For cached dbt2 workload (lighter IO load)

AS		2.6.0-test11-D  4993
AS		2.6.-test6-mm4  4976, 4890, 4972
deadline	2.6.0-test11-D  4998

Can this be included in 2.6.0?  I know it's not a "critical patch"
in the sense that something won't work without it.  On the other hand,
the change is isolated to a driver.

From: Paul Clements <Paul.Clements@SteelEye.com>

A previous "cleanup" on the nbd.h header file broke userspace compiles.
I've added an #ifdef __KERNEL__ so that userspace doesn't need to worry
about the nbd_device structure, which is only used in-kernel. The patch
allows me to compile my nbd tools with the 2.6 nbd.h.

From: Tonnerre Anklin <thunder@keepsake.ch>

This spinlock was used uninitialized. Gave me a lot of warnings.

From: Manfred Spraul <manfred@colorfullife.com>

if alloc_slabmgmt fails, then kmem_freepages() calls sub_page_state(),
altough nr_slab was not yet increased.  The attached patch fixes that by
moving the inc_page_state into kmem_getpages().

From: Rusty Russell <rusty@rustcorp.com.au>
      Steve Youngs, Stephen Hemminger

Three more MODULE_ALIASes.  Trivial, but useful if people want things
to "just work" in 2.6.0.

From: Ingo Molnar <mingo@elte.hu>

i've attached a minor fix for the 2.6.1 timeframe - we clearly meant
__struct_cpy_bug().  Newest versions of gcc warn about this.

From: Manfred Spraul <manfred@colorfullife.com>

slab_reclaim_pages is increased even if get_free_pages fails.  The attached
patch moves the update to the correct position.

From: Tim Schmielau <tim@physik3.uni-rostock.de>

From: Kurt Garloff <garloff@suse.de>

The comment in front of vt_ioctl() reads
/*
 * We handle the console-specific ioctl's here.  We allow the
 * capability to modify any console, not just the fg_console.=20
 */

Unfortunately, this does not apply to PIO_UNIMAPCLR, nor
GIO_/PIO_UNIMAP. They always operate on the current foreground
console, which is inconsistent at least. For most ioctls, the
comment is applicable.

It also causes problems, as setfont can't do the full job on
the non-fg consoles. (OK, our setfont is slightly changed to
even try it ... as you know.)

The attached patch does fix this.

I have a similar patch for 2.4, but it never got merged :-(
because not many people seem to care and I submitted in the middle
of the 2.4 series ...
It has been in UnitedLinux/SUSE kernels for ages, though.

From: "Martin J. Bligh" <mbligh@aracnet.com>,
      Guillaume Morin <guillaume@morinfr.org>

We need to clear the software dirty bit on the tail pages of a compound page
when freeing it up.

The tail pages can become dirtied by mmap'ing /dev/mem, and writing into
any clustered page group (that a driver might have created or whatever).

Plus it's better to run all these pages through the free_pages_check checks
anyway.

From: Ingo Molnar <mingo@elte.hu>

I'd also suggest the following patch below, to clarify the use of
unsynchronized list_empty().  list_empty_careful() can only be safe in the
very specific case of "one-shot" list entries which might be removed by
another CPU.  (but nothing else can happen to them and this is their only
final state.) list_empty_careful() is otherwise completely unsynchronized
on both the compiler and CPU level and is not 'SMP safe' in any way.

From: Geert Uytterhoeven <geert@linux-m68k.org>

Mailing lists at vger.rutgers.edu are obsolete, use vger.kernel.org
instead.

From: Joe Korty <joe.korty@ccur.com>

The API for get_compat_timespec / put_compat_timespec is incorrect, it
forces a caller with const args to (incorrectly) cast.  The posix message
queue patch is one such caller.

From: Gerd Knorr <kraxel@bytesex.org>

Below is a ObviouslyCorrect[tm] patch which fixes the i2c bus timeout
handling in the saa7146 driver.

The locking rules say that b_committed_data is covered by
jbd_lock_bh_state(), so implement that during the start of commit, while
throwing away unused shadow buffers.

I don't expect that there is really a race here, but them's the rules.

From: Badari Pulavarty <pbadari@us.ibm.com>

I found the problem with O_DIRECT memory leak.

The problem is, when we are doing DIO read and crossed the end of file - we
don't release referencess on all the pages we got from get_user_pages().
(since it is a success case).

The fix is to call dio_cleanup() even for sucess cases.

From: Roland McGrath <roland@redhat.com>

The following test program will crash every time if dynamically linked.
I think this bites all 32-bit platforms, including 32-bit executables on
64-bit platforms that support them (and could in theory bite 64-bit
platforms with bss sizes beyond the bounds of comprehension).

	volatile char hugebss[1080000000];
	main() { printf("%p..%p\n", &hugebss[0], &hugebss[sizeof hugebss]);
	 system("cat /proc/$PPID/maps");
	 hugebss[sizeof hugebss - 1] = 1;
	 return 23;
	}

The problem is that the kernel maps ld.so at 0x40000000 or some such place,
before it maps the bss.  Here the bss is so large that it overlaps and
clobbers that mapping.  I've changed it to map the bss before it loads the
interpreter, so that part of the address space is reserved before ld.so's
mapping (which doesn't really care where it goes) is done.

This patch also adds error checking to the bss setup (and interpreter's bss
setup).  With the aforementioned change but no error checking, "ulimit -v
65536; ./hugebss" will crash in the store after the `system' call, because
the kernel will have failed to allocate the bss and ignored the error, so
the program runs without those pages being mapped at all.  With this change
it dies with a SIGKILL as for a failure to set up stack pages.  It might be
even better to try to detect the case earlier so that execve can return an
error before it has wiped out the address space.  But that seems like it
would always be fragile and miss some corner cases, so I did not try to add
such complexity.

From: Joe Korty <joe.korty@ccur.com>

do_gettimeofday() is using tick_usec which is defined in terms of USER_HZ
not HZ.

From: NeilBrown <neilb@cse.unsw.edu.au>

stripe to be effective.  This patch sets ra_pages
appropriately.

From: NeilBrown <neilb@cse.unsw.edu.au>

As no md personalities honour the merge_bvec_fn of underlying devices,
we must make sure never to submit a bio larger than 1 page when a 
merge_bvec_fn is defined.

raid5 already does this (it never submits bios larger than one page).
With this patch, all other raid personalities limit their
max_sectors when a merge_bvec_fn is present.

From: glee@gnupilgrims.org

I think Adrian had forgotten to update the help text.

From: Jan Kara <jack@ucw.cz>

here's patch which should fix deadlock with quotas+ext3 reported in 2.4
(the same problem existed in 2.6 but nobody found it).

From: Jan Kara <jack@ucw.cz>

I'm sending you a fix of possible Oops in vfs_quota_sync().  Actually
nobody has run into that I found it when I was looking through the code.

From: Geoffrey Lee <glee@gnupilgrims.org>

This fixes what seems to be an obvious = vs == bug in the init301.c sis
file.

From: William Lee Irwin III <wli@holomorphy.com>

This field is 100% unused. This patch removes it.

From: Andi Kleen <ak@muc.de>

32bit siginfo would sometimes get passed incorrectly on x86-64. This
change fixes the conversion function to be a bit dumber, but more
correct.

From: Andi Kleen <ak@muc.de>

Merge i386 fix. Don't panic in MP table parsing when the table is bad.

From: Andi Kleen <ak@muc.de>

Merge signal race fixes from i386 to x86-64.

Fix a bug in system call restart, noted by John Blackwood.

From: Andi Kleen <ak@muc.de>

Merge the i386 fix for the page fault from Linus to x86-64
(I'm not actually sure what it fixes, but if it's good for 32bit
it is likely good for 64bit too)

From: Andi Kleen <ak@muc.de>

Make sure we never access anything in kernel mapping while
doing the prefetch workaround checks on x86-64.

Originally suggested by Jamie Lockier.

From: Andi Kleen <ak@muc.de>

Another potential data corruption fix.

The 32bit truncate64 on x86-64 did silently truncate
offsets >32bit. That broke mysql for example. Fix that.

From Chris Wilson

From: Andi Kleen <ak@muc.de>

From Badari Pulavarty

Without this sysrq-t shows the same backtrace for all processes on x86-64

From: Andi Kleen <ak@muc.de>

A lot of people have run into this: the x86-64 cpuid driver didn't
compile as module.

Using a kludge suggested by Sam Ravnsborg.

From: Andi Kleen <ak@muc.de>

Please consider applying this patch, I would consider it critical for x86-64.

The 2.6.0 x86-64 IOMMU code unfortunately had a few problems, leading
to non booting systems and in a few cases to data corruption.

It fixes a two serious bugs in handling special kinds of scatter gather
lists in pci_map_sg.

AGP was completely broken with IOMMU because of a wrong #ifdef.
Fix that.

One TLB flush optimization I did a long time ago seems to break on
some 3ware boards (who require IOMMU because they don't support 64bit
addresses).  The breakage lead to data corruption. This patch diables
the optimization for now and fixes a potential SMP race in the flush
code too. The TLB flush is done in a slower, but more reliable way
now too.

This patch fixes them. Please consider applying, because some of these
problems hit quite many people.

This also disables the IOMMU_DEBUG in the defconfig. A lot of people 
were using the IOMMU when they didn't need to, which multiplied the
problems.

IOMMU merge is disabled for now. This was an experimental optimization
which helped with some block devices, but for production it seems to
be better to disable it for now because there are some questionable
corner cases when the IOMMU aperture fragments. The same is done
for IOMMU SAC force, which was related to that. 

i386 has quite broken semantics for pci_alloc_consistent(). It uses
the standard device DMA mask instead of the consistent mask. Make us
bug-to-bug compatible here. This fixes problems with some sound
drivers that don't support full 32bit addressing.

From: Andi Kleen <ak@muc.de>

Add 32bit a.out support for x86-64.

Not exactly an important bug fix, but maybe it will help someone.  This
should increase the current 98% compatibility to i386 to perhaps 98.1% @)

I tested an old a.out SuSE 4.2 installation in chroot and it worked.  It
also ran some very old linux binaries from '92 found on ftp.funet.fi.  The
only program that didn't was the SuSE a.out GNU emacs, but I was too lazy
to track that down.  Core dumps are not supported.

From: Andi Kleen <ak@muc.de>

It fixes the statfs64 emulation on x86-64.  The problem is that x86-64
needs an __attribute__((aligned)) on the compat_statfs64 structure.  The
conclusion last time this was discussed was that the structure should be
duplicated.

Essentially it is the old shared structure copied to every user and x86-64
uses __attribute__((packed)).

From: Mark Haverkamp <markh@osdl.org>

About three weeks ago markw at osdl posted a mail about a panic that he
was seeing:

http://marc.theaimsgroup.com/?l=linux-kernel&m=106737176716474&w=2

I believe what is happening, is that the dm __clone_and_map function is
generating bio structures with the bi_idx field non-zero.  When
__blk_queue_bounce creates a new bio with bounce pages, it sets the bi_idx
field to 0 rather than the bi_idx of the original.  This causes trouble since
bv_page pointers will be dereferenced later that are zero.  The following
uses the original bio structure's bi_idx in the new bio structure and in
copy_to_high_bio_irq and bounce_end_io.

This has cleared up the panic when using the volume.

(acked by Joe Thornber)

From: Neil Brown <neilb@cse.unsw.edu.au>

Change ext3 to run bd_claim() against external journal devices. It is
significant only for those who have ext3 journals on a separate device, and
gets exclusive access to that device.

From: Arnaldo Carvalho de Melo <acme@conectiva.com.br>

pagemap.h, do not include thyself.

Remove pointless lock_kernel(), replace with the standard-but-still-odd
i_sem-based lseek locking.