- 27 Nov, 2009 7 commits
-
-
Joerg Roedel authored
This patch re-implements iommu_flush_tlb functions to use the __iommu_flush_pages logic. Signed-off-by:Joerg Roedel <joerg.roedel@amd.com>
-
Joerg Roedel authored
This patch extends the iommu_flush_pages function to flush the TLB entries on all IOMMUs the domain has devices on. This basically gives up the former assumption that dma_ops domains are only bound to one IOMMU in the system. For dma_ops domains this is still true but not for IOMMU-API managed domains. Giving this assumption up for dma_ops domains too allows code simplification. Further it splits out the main logic into a generic function which can be used by iommu_flush_tlb too. Signed-off-by: -
Joerg Roedel authored
This patch adds a function to the AMD IOMMU driver which completes all queued commands an all IOMMUs a specific domain has devices attached on. This is required in a later patch when per-domain flushing is implemented. Signed-off-by: -
Joerg Roedel authored
This patch adds reference counting for protection domains per IOMMU. This allows a smarter TLB flushing strategy. Signed-off-by: -
Joerg Roedel authored
This patch adds an index field to struct amd_iommu which can be used to lookup it up in an array. This index will be used in struct protection_domain to keep track which protection domain has devices behind which IOMMU. Signed-off-by: -
Joerg Roedel authored
This patch updates the copyright headers in the relevant AMD IOMMU driver files to match the date of the latest changes. Signed-off-by: -
Joerg Roedel authored
This patch moves all function declarations which are only used inside the driver code to a seperate header file. Signed-off-by:
-
- 25 Nov, 2009 1 commit
-
-
FUJITA Tomonori authored
iommu=soft boot option forces the kernel to use swiotlb. ( This has the side-effect of enabling the swiotlb over the GART if this boot option is provided. This is the desired behavior of the swiotlb boot option and works like that for all other hw-IOMMU drivers. ) Signed-off-by:
FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: yinghai@kernel.org LKML-Reference: <20091125084611O.fujita.tomonori@lab.ntt.co.jp> Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-
- 23 Nov, 2009 2 commits
-
-
Joerg Roedel authored
For some devices the ACPI table may define unity map requirements which must me met when the IOMMU is enabled. So we need to attach devices to their domains as early as possible so that these mappings are in place when needed. This patch assigns the domains right after they are allocated. Otherwise this can result in I/O page faults before a driver binds to a device and BIOS is still using it. Cc: stable@kernel.org Signed-off-by: -
Joerg Roedel authored
This function may be called on the resume path and can not be dropped after booting. Cc: stable@kernel.org Signed-off-by:
-
- 17 Nov, 2009 5 commits
-
-
Ingo Molnar authored
Clean up various small stylistic details in the GART code. No functionality changed. Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: muli@il.ibm.com Cc: joerg.roedel@amd.com LKML-Reference: <1258287594-8777-2-git-send-email-fujita.tomonori@lab.ntt.co.jp> Signed-off-by: -
FUJITA Tomonori authored
This cleans up iommu_alloc() a bit and removes unnecessary DMA_ERROR_CODE usage. Signed-off-by:
Jesse Barnes <jbarnes@virtuousgeek.org> Cc: muli@il.ibm.com Cc: joerg.roedel@amd.com LKML-Reference: <1258287594-8777-4-git-send-email-fujita.tomonori@lab.ntt.co.jp> Signed-off-by:
-
FUJITA Tomonori authored
This kills bad_dma_address variable, the old mechanism to enable IOMMU drivers to make dma_mapping_error() work in IOMMU's specific way. bad_dma_address variable was introduced to enable IOMMU drivers to make dma_mapping_error() work in IOMMU's specific way. However, it can't handle systems that use both swiotlb and HW IOMMU. SO we introduced dma_map_ops->mapping_error to solve that case. Intel VT-d, GART, and swiotlb already use dma_map_ops->mapping_error. Calgary, AMD IOMMU, and nommu use zero for an error dma address. This adds DMA_ERROR_CODE and converts them to use it (as SPARC and POWER does). Signed-off-by:
-
FUJITA Tomonori authored
GART IOMMU is the only user of bad_dma_address variable. This patch converts GART to use the newer mechanism, fill in ->mapping_error() in struct dma_map_ops, to make dma_mapping_error() work in IOMMU specific way. Signed-off-by:
-
Ingo Molnar authored
Merge reason: Add fixes we'll depend on. Signed-off-by:
-
- 16 Nov, 2009 1 commit
-
-
Hiroshi Shimamoto authored
It causes kernel panic on shutdown or reboot. Signed-off-by:
Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com> Acked-by:
-
- 15 Nov, 2009 4 commits
-
-
FUJITA Tomonori authored
This makes calgary_iommu_init() static and moves it to remove the forward declaration. Signed-off-by:
-
FUJITA Tomonori authored
Signed-off-by:
-
FUJITA Tomonori authored
iommu_init_noop() is in arch/x86/kernel/x86_init.c but iommu_shutdown_noop() in arch/x86/include/asm/iommu.h. This moves iommu_shutdown_noop() to x86_init.c for consistency. Signed-off-by:
-
FUJITA Tomonori authored
We set dma_ops to nommu_dma_ops at two different places for x86_32 and x86_64. This unifies them by setting dma_ops to nommu_dma_ops by default. Signed-off-by:
-
- 13 Nov, 2009 1 commit
-
-
Linus Torvalds authored
-
- 12 Nov, 2009 19 commits
-
-
Linus Torvalds authored
Merge branch 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: omap3: Decrease cpufreq transition latency omap3: update Pandora defconfig omap3: 3430sdp: Enable Linux Regulator framework omap3: beagle: Fix USB host port power control omap3: pandora: Fix keypad keymap omap1: Amstrad Delta defconfig fixes omap: Fix omapfb/lcdc on OMAP1510 broken when PM set omap: Use resource_size omap: Fix race condition in omap dma driver
-
Mike Hommey authored
Because of an integer overflow on start_blk, various kind of wrong results would be returned by the generic_block_fiemap() handler, such as no extents when there is a 4GB+ hole at the beginning of the file, or wrong fe_logical when an extent starts after the first 4GB. Signed-off-by:
Mike Hommey <mh@glandium.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Eric Sandeen <sandeen@sgi.com> Cc: Josef Bacik <jbacik@redhat.com> Cc: Mark Fasheh <mfasheh@suse.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Rodolfo Giometti authored
PPS events must be recorded according to PPS's mode settings. If a process asks for (i.e.) capture-assert events only, when the PPS client calls the pps_event() function to save the current PPS event, we should verify the event type and then discard unwanted ones. Also, without this patch userland processes waiting for a specific PPS event (assert or clear but not both) may be awakened at wrong time. Signed-off-by:
Rodolfo Giometti <giometti@linux.it> Tested-by:
William S. Brasher <billb958@door.net> Tested-by:
Reg Clemens <clemens@dwf.com> Cc: <stable@kernel.org> Signed-off-by:
-
Rodolfo Giometti authored
Userland programs may read/write PPS parameters at same time and these operations may corrupt PPS data. Signed-off-by:
-
Pavel Machek authored
TASK_INTERRUPTIBLE and friends are now only available after including <linux/sched.h>, so include it when needed. bus_id is no longer available/necessary, so remove that. Android pmem driver is not available in mainline, so remove its hooks from drivers/video. Signed-off-by:
Pavel Machek <pavel@ucw.cz> Signed-off-by:
-
Sergei Shtylyov authored
In case of failure, device_create() returns not NULL but the error code. The current code checks for non-NULL though which causes kernel oops in sysfs_create_group() when device_create() fails. Check for error using IS_ERR() and propagate the error value using PTR_ERR() instead of fixed -ENODEV code returned now... Signed-off-by:
Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by:
-
Scott Valentine authored
v3020_mmio_read_bit() always returns 0 when left_shift > 7. v3020_mmio_read_bit()'s return type is (unsigned char). The code returns a value masked by (1 << left_shift) that is casted to the return type. If left_shift is larger than 7, the cast will always result in a 0 return value. The problem was discovered with left_shift = 16, and the included patch corrects the problem. The bug was introduced in the last (Apr 3 2009) commit of the file, kernel versions 2.6.30 and later. Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Paul Gortmaker <p_gortmaker@yahoo.com> Cc: Raphael Assenat <raph@8d.com> Cc: <stable@kernel.org> Signed-off-by:
-
Yoichi Yuasa authored
drivers/rtc/rtc-vr41xx.c: In function 'vr41xx_rtc_irq_set_freq': drivers/rtc/rtc-vr41xx.c:217: warning: comparison of distinct pointer types lacks a cast drivers/rtc/rtc-vr41xx.c:217: warning: right shift count >= width of type drivers/rtc/rtc-vr41xx.c:217: warning: passing argument 1 of '__div64_32' from incompatible pointer type include/asm-generic/div64.h:35: note: expected 'uint64_t *' but argument is of type 'long unsigned int *' Signed-off-by:
Yoichi Yuasa <yuasa@linux-mips.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Paul Gortmaker <p_gortmaker@yahoo.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
-
Anton Blanchard authored
In setup_arg_pages we work hard to assign a value to ret, but on exit we always return 0. Also remove a now duplicated exit path and branch to out_unlock instead. Signed-off-by:
Anton Blanchard <anton@samba.org> Acked-by:
Serge Hallyn <serue@us.ibm.com> Reviewed-by:
WANG Cong <xiyou.wangcong@gmail.com> Signed-off-by:
-
Guennadi Liakhovetski authored
The config FB_PRE_INIT_FB entry in drivers/video/Kconfig pushes all entries below it out of the menuconfig selection. Fix this. Signed-off-by:
Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by:
-
Joe Perches authored
Use git.kernel.org not www.kernel.org Signed-off-by:
Joe Perches <joe@perches.com> Cc: James Morris <jmorris@namei.org> Signed-off-by:
-
Joe Perches authored
Signed-off-by:
-
Joe Perches authored
Signed-off-by:
-
Ladislav Michl authored
Free IRQ on remove. Signed-off-by:
Ladislav Michl <ladis@linux-mips.org> Acked-by:
Tony Lindgren <tony@atomide.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by:
-
Lennert Buytenhek authored
This seems to be a different model (with a different PCI ID) than the "Quatro" card that is also in the list. Signed-off-by:
Lennert Buytenhek <buytenh@wantstofly.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by:
-
Lennert Buytenhek authored
struct uart_port::iobase is unsigned long, so use %lx as printk format specifier. Signed-off-by:
-
Werner Almesberger authored
According to Documentation/rtc.txt, RTC_WKALM_SET sets the alarm time and enables/disables the alarm. We implement RTC_WKALM_SET through pcf50633_rtc_set_alarm. The enabling/disabling part was missing. Signed-off-by:
Werner Almesberger <werner@openmoko.org> Reported-by:
Michael 'Mickey' Lauer <mickey@openmoko.org> Signed-off-by:
Paul Fertser <fercerpav@gmail.com> Cc: Paul Gortmaker <p_gortmaker@yahoo.com> Cc: Balaji Rao <balajirrao@openmoko.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by:
-
Rask Ingemann Lambertsen authored
The PCF50633 stores a month value of 1-12, but the kernel wants 0-11. Signed-off-by:
Rask Ingemann Lambertsen <rask@sygehus.dk> Signed-off-by:
-
Nicolas Ferre authored
at91sam9g45 non ES lots have an alternate pixel clock calculation formula. Introduce this one with condition on the cpu_is_xxxxx() macros. Newer 9g45 SOC will not have good pixel clock calculation without this fix. Signed-off-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Krzysztof Helt <krzysztof.h1@wp.pl> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by:
-
