Rename the symbol for the XCID pins, fix up a decimal/hex confusion for
the CMI8787 package ID, and add the other known package IDs.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The anti-pop delay for the STX should be 800 ms, not 100 ms like the ST.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Add a PCI ID for the Xonar HDAV1.3 Slim.  There is no actual support,
but the presence of the ID allows the EEPROM repair code to work for
this card.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

There are more models without a CD input than with one, so handle this
explicitly with a device_config flag to avoid having to define a control
filter callback to filter it out.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The controller on the Xonar DS is labeled "AV66", not "AV200".
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Add quirks for more devices (according to driver V.3.0.4-2).
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Simple coding fix.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

In a special case, some old samples are left in the capture ring buffer.
Fix it.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

Remove the SH DAC oss driver since there is an equivalent alsa driver.
oss has been deprecated for years. Furthermore this driver has BKL code
which we are trying to remove. Rather than attempt to fix this, simply
remove the driver.
Signed-off-by: John Kacur <jkacur@redhat.com>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

"uinfo->value.enumerated.item" is an unsigned int.  If it's negative
when we do the comparison:
	if ((int)uinfo->value.enumerated.item >= cval->max)
then we would read past the end of the array on the next line.

I also changed the strcpy() to strlcpy() out of paranoia.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

When user want to change the card id to the same string
on the card via /sys/class/sound/cardX/id, do not
report error. Instead return with success without
doing anything.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Used only when CONFIG_SND_DEBUG=y
  sound/usb/mixer.c: In function 'get_min_max':
  sound/usb/mixer.c:762: warning: unused variable 'chip'
Reported-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Obvious copy-and-paste error.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

The usage of the BKL in the OSS sound drivers is
trivial, and each of them only locks against itself,
so it can be turned into per-driver mutexes.

This is the script that was used for the conversion:

file=$1
name=$2
if grep -q lock_kernel ${file} ; then
    if grep -q 'include.*linux.mutex.h' ${file} ; then
            sed -i '/include.*<linux\/smp_lock.h>/d' ${file}
    else
            sed -i 's/include.*<linux\/smp_lock.h>.*$/include <linux\/mutex.h>/g' ${file}
    fi
    sed -i ${file} \
        -e "/^#include.*linux.mutex.h/,$ {
                1,/^\(static\|int\|long\)/ {
                     /^\(static\|int\|long\)/istatic DEFINE_MUTEX(${name}_mutex);

} }"  \
    -e "s/\(un\)*lock_kernel\>[ ]*()/mutex_\1lock(\&${name}_mutex)/g" \
    -e '/[      ]*cycle_kernel_lock();/d'
else
    sed -i -e '/include.*\<smp_lock.h\>/d' ${file}  \
                -e '/cycle_kernel_lock()/d'
fi
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Modifying an object twice without an intervening sequence point is
undefined.
Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Reported-by: Carmen Cru <carmen.cru@belgacom.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Fix docbook templates that reference files that do not contain the
expected kernel-doc notation.

Fixes these warnings:

  Warning(arch/x86/include/asm/unaligned.h): no structured comments found
  Warning(lib/vsprintf.c): no structured comments found

These cause errors in the generated html output, like below, so drop
these lines.

  Name
  arch/x86/include/asm/unaligned.h - Document generation inconsistency
  Oops
  Warning
  The template for this document tried to insert the structured comment from the file arch/x86/include/asm/unaligned.h at this point, but none was found. This dummy section is inserted to allow generation to continue.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When you don't use !E or !I but only !F, then it's very easy to miss
including some functions, structs etc.  in documentation.  To help
finding which ones were missed, allow printing out the unused ones as
warnings.

For example, using this on mac80211 yields a lot of warnings like this:

  Warning: didn't use docs for DOC: mac80211 workqueue
  Warning: didn't use docs for ieee80211_max_queues
  Warning: didn't use docs for ieee80211_bss_change
  Warning: didn't use docs for ieee80211_bss_conf

when generating the documentation for it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

There are valid attributes that could have upper case letters, but we
still want to remove, like for example
	__attribute__((aligned(NETDEV_ALIGN)))
as encountered in the wireless code.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6:
  PM / Hibernate: Avoid hitting OOM during preallocation of memory
  PM QoS: Correct pr_debug() misuse and improve parameter checks
  PM: Prevent waiting forever on asynchronous resume after failing suspend

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6:
  [SCSI] fix use-after-free in scsi_init_io()
  [SCSI] sd: fix medium-removal bug
  [SCSI] qla2xxx: Update version number to 8.03.04-k0.
  [SCSI] qla2xxx: Check for empty slot in request queue before posting Command type 6 request.
  [SCSI] qla2xxx: Cover UNDERRUN case where SCSI status is set.
  [SCSI] qla2xxx: Correctly set fw hung and complete only waiting mbx.
  [SCSI] qla2xxx: Reset seconds_since_last_heartbeat correctly.
  [SCSI] qla2xxx: make rport deletions explicit during vport removal
  [SCSI] qla2xxx: Fix vport delete issues
  [SCSI] sd, sym53c8xx: Remove warnings after vsprintf %pV introducation.
  [SCSI] Fix warning: zero-length gnu_printf format string
  [SCSI] hpsa: disable doorbell reset on reset_devices
  [SCSI] be2iscsi: Fix for Login failure
  [SCSI] fix bio.bi_rw handling

There is a problem in hibernate_preallocate_memory() that it calls
preallocate_image_memory() with an argument that may be greater than
the total number of available non-highmem memory pages.  If that's
the case, the OOM condition is guaranteed to trigger, which in turn
can cause significant slowdown to occur during hibernation.

To avoid that, make preallocate_image_memory() adjust its argument
before calling preallocate_image_pages(), so that the total number of
saveable non-highem pages left is not less than the minimum size of
a hibernation image.  Change hibernate_preallocate_memory() to try to
allocate from highmem if the number of pages allocated by
preallocate_image_memory() is too low.

Modify free_unnecessary_pages() to take all possible memory
allocation patterns into account.
Reported-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Tested-by: M. Vefa Bicakci <bicave@superonline.com>

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (28 commits)
  ipheth: remove incorrect devtype to WWAN
  MAINTAINERS: Add CAIF
  sctp: fix test for end of loop
  KS8851: Correct RX packet allocation
  udp: add rehash on connect()
  net: blackhole route should always be recalculated
  ipv4: Suppress lockdep-RCU false positive in FIB trie (3)
  niu: Fix kernel buffer overflow for ETHTOOL_GRXCLSRLALL
  ipvs: fix active FTP
  gro: Re-fix different skb headrooms
  via-velocity: Turn scatter-gather support back off.
  ipv4: Fix reverse path filtering with multipath routing.
  UNIX: Do not loop forever at unix_autobind().
  PATCH: b44 Handle RX FIFO overflow better (simplified)
  irda: off by one
  3c59x: Fix deadlock in vortex_error()
  netfilter: discard overlapping IPv6 fragment
  ipv6: discard overlapping fragment
  net: fix tx queue selection for bridged devices implementing select_queue
  bonding: Fix jiffies overflow problems (again)
  ...

Fix up trivial conflicts due to the same cgroup API thinko fix going
through both Andrew and the networking tree.  However, there were small
differences between the two, with Andrew's version generally being the
nicer one, and the one I merged first. So pick that one.

Conflicts in: include/linux/cgroup.h and kernel/cgroup.c

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  sparc: Kill all BKL usage.

Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, tsc: Fix a preemption leak in restore_sched_clock_state()
  sched: Move sched_avg_update() to update_cpu_load()

Doh, a real life genuine preemption leak..

This caused a suspend failure.

Reported-bisected-and-tested-by-the-invaluable: Jeff Chua <jeff.chua.linux@gmail.com>
Acked-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Nico Schottelius <nico-linux-20100709@schottelius.org>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Florian Pritz <flo@xssn.at>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Len Brown <lenb@kernel.org>
Cc: <stable@kernel.org> # Greg, please apply after: cd7240c0 ("x86, tsc, sched: Recompute cyc2ns_offset's during resume from")
sleep states
LKML-Reference: <1284150773.402.122.camel@laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

* 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ickle/drm-intel:
  drm/i915: don't enable self-refresh on Ironlake
  drm/i915: Double check that the wait_request is not pending before warning
  Revert "drm/i915: Warn if we run out of FIFO space for a mode"
  Revert "drm/i915: Allow LVDS on pipe A on gen4+"
  Revert "drm/i915: Enable RC6 on Ironlake."

* 'for-linus' of git://oss.sgi.com/xfs/xfs:
  xfs: log IO completion workqueue is a high priority queue
  xfs: prevent reading uninitialized stack memory

A real life genuine preemption leak..
Reported-and-tested-by: Jeff Chua <jeff.chua.linux@gmail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Correct some pr_debug() misuse and add a stronger parameter check to
pm_qos_write() for the ASCII hex value case.  Thanks to Dan Carpenter
for pointing out the problem!
Signed-off-by: mark gross <markgross@thegnar.org>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>

The workqueue implementation in 2.6.36-rcX has changed, resulting
in the workqueues no longer having dedicated threads for work
processing. This has caused severe livelocks under heavy parallel
create workloads because the log IO completions have been getting
held up behind metadata IO completions.  Hence log commits would
stall, memory allocation would stall because pages could not be
cleaned, and lock contention on the AIL during inode IO completion
processing was being seen to slow everything down even further.

By making the log Io completion workqueue a high priority workqueue,
they are queued ahead of all data/metadata IO completions and
processed before the data/metadata completions. Hence the log never
gets stalled, and operations needed to clean memory can continue as
quickly as possible. This avoids the livelock conditions and allos
the system to keep running under heavy load as per normal.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>

An execve with a very large total of argument/environment strings
can take a really long time in the execve system call.  It runs
uninterruptibly to count and copy all the strings.  This change
makes it abort the exec quickly if sent a SIGKILL.

Note that this is the conservative change, to interrupt only for
SIGKILL, by using fatal_signal_pending().  It would be perfectly
correct semantics to let any signal interrupt the string-copying in
execve, i.e. use signal_pending() instead of fatal_signal_pending().
We'll save that change for later, since it could have user-visible
consequences, such as having a timer set too quickly make it so that
an execve can never complete, though it always happened to work before.
Signed-off-by: Roland McGrath <roland@redhat.com>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This adds a preemption point during the copying of the argument and
environment strings for execve, in copy_strings().  There is already
a preemption point in the count() loop, so this doesn't add any new
points in the abstract sense.

When the total argument+environment strings are very large, the time
spent copying them can be much more than a normal user time slice.
So this change improves the interactivity of the rest of the system
when one process is doing an execve with very large arguments.
Signed-off-by: Roland McGrath <roland@redhat.com>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>