- 10 Oct, 2018 1 commit
-
-
Hieu Tran Dang authored
Certain devices don't work well when a transmit FIFO underrun or receive FIFO overrun occurs. Example is the SAF400x radio chip when running at high speed which leads to garbage being sent to/received from the chip. In which case, it should stall waiting for further data to be available before proceeding. This patch unset the NOSTALL bit in CFGR1 by default to prevent this issue. Signed-off-by: Hieu Tran Dang <dangtranhieu2012@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
- 08 Oct, 2018 2 commits
-
-
Nathan Chancellor authored
Clang warns when one enumerated type is implicitly converted to another. drivers/spi/spi-ep93xx.c:342:62: warning: implicit conversion from enumeration type 'enum dma_transfer_direction' to different enumeration type 'enum dma_data_direction' [-Wenum-conversion] nents = dma_map_sg(chan->device->dev, sgt->sgl, sgt->nents, dir); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~ ./include/linux/dma-mapping.h:428:58: note: expanded from macro 'dma_map_sg' #define dma_map_sg(d, s, n, r) dma_map_sg_attrs(d, s, n, r, 0) ~~~~~~~~~~~~~~~~ ^ drivers/spi/spi-ep93xx.c:348:57: warning: implicit conversion from enumeration type 'enum dma_transfer_direction' to different enumeration type 'enum dma_data_direction' [-Wenum-conversion] dma_unmap_sg(chan->device->dev, sgt->sgl, sgt->nents, dir); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~ ./include/linux/dma-mapping.h:429:62: note: expanded from macro 'dma_unmap_sg' #define dma_unmap_sg(d, s, n, r) dma_unmap_sg_attrs(d, s, n, r, 0) ~~~~~~~~~~~~~~~~~~ ^ drivers/spi/spi-ep93xx.c:377:56: warning: implicit conversion from enumeration type 'enum dma_transfer_direction' to different enumeration type 'enum dma_data_direction' [-Wenum-conversion] dma_unmap_sg(chan->device->dev, sgt->sgl, sgt->nents, dir); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~ ./include/linux/dma-mapping.h:429:62: note: expanded from macro 'dma_unmap_sg' #define dma_unmap_sg(d, s, n, r) dma_unmap_sg_attrs(d, s, n, r, 0) ~~~~~~~~~~~~~~~~~~ ^ 3 warnings generated. dma_{,un}map_sg expect an enum of type dma_data_direction but this driver uses dma_transfer_direction for everything. Convert the driver to use dma_data_direction for these two functions. There are two places that strictly require an enum of type dma_transfer_direction: the direction member in struct dma_slave_config and the direction parameter in dmaengine_prep_slave_sg. To avoid using an explicit cast, add a simple function, ep93xx_dma_data_to_trans_dir, to safely map between the two types because they are not 1 to 1 in meaning. Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Lukasz Majewski authored
With this commit the DSPI driver on the BK4 board can be used for SPI transmission managed from user space (via /dev/spidev0.0). Example usage/testing: insmod ./spi-fsl-dspi.ko ./spidev_test -D /dev/spidev0.0 -s 3000000 -v -H -b 8 -p "\xCC\x11\x22\x74" Signed-off-by: Lukasz Majewski <lukma@denx.de> Signed-off-by: Mark Brown <broonie@kernel.org>
-
- 04 Oct, 2018 1 commit
-
-
Gustavo A. R. Silva authored
Rewrite switch code block to directly do the expected number of shifts in each case and have break statements. Addresses-Coverity-ID: 1056539 ("Missing break in switch") Suggested-by: Mark Brown <broonie@kernel.org> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
- 03 Oct, 2018 1 commit
-
-
Gustavo A. R. Silva authored
Apparently, this code does not actually fall through to the next case because the machine restarts before it has a chance. However, for the sake of maintenance and readability, we better add the missing break statement. Addresses-Coverity-ID: 1437892 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
- 01 Oct, 2018 2 commits
-
-
Biju Das authored
Document RZ/G1N (R8A7744) SoC bindings. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Biju Das authored
Document RZ/G1N (r8a7744) SoC specific bindings. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Mark Brown <broonie@kernel.org>
-
- 28 Sep, 2018 2 commits
-
-
Leilk Liu authored
This patch adds basic spi slave for MT2712. Signed-off-by: Leilk Liu <leilk.liu@mediatek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Leilk Liu authored
This patch adds a DT binding documentation for the MT2712 soc. Signed-off-by: Leilk Liu <leilk.liu@mediatek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
- 27 Sep, 2018 4 commits
-
-
Marco Felsch authored
Use the appropriate SPDX license identifier and drop the previous license text. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Geert Uytterhoeven authored
On r8a7791/koelsch: m25p80 spi0.0: error -22 reading 9f m25p80: probe of spi0.0 failed with error -22 Apparently the logic in spi_mem_check_op() is wrong, rejecting the spi-mem operation if any buswidth is valid, instead of invalid. Fixes: 38058322 ("spi: spi-mem: Add extra sanity checks on the op param") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Chris Brandt authored
Add support for RZ/A2 Signed-off-by: Chris Brandt <chris.brandt@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Arnd Bergmann authored
The __exit section is left out for built-in drivers, so a 'remove' callback must not be marked as such to avoid breaking when we unbind a device at runtime. This was pointed out by kbuild: `sprd_spi_remove' referenced in section `.data' of drivers/spi/spi-sprd.o: defined in discarded section `.exit.text' of drivers/spi/spi-sprd.o Fixes: e7d973a3 ("spi: sprd: Add SPI driver for Spreadtrum SC9860") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
-
- 21 Sep, 2018 1 commit
-
-
Nathan Chancellor authored
Clang warns when one enumerated type is converted implicitly to another: drivers/spi/spi-pic32.c:323:8: warning: implicit conversion from enumeration type 'enum dma_data_direction' to different enumeration type 'enum dma_transfer_direction' [-Wenum-conversion] DMA_FROM_DEVICE, ^~~~~~~~~~~~~~~ drivers/spi/spi-pic32.c:333:8: warning: implicit conversion from enumeration type 'enum dma_data_direction' to different enumeration type 'enum dma_transfer_direction' [-Wenum-conversion] DMA_TO_DEVICE, ^~~~~~~~~~~~~ 2 warnings generated. Use the proper enums from dma_transfer_direction (DMA_FROM_DEVICE = DMA_DEV_TO_MEM = 2, DMA_TO_DEVICE = DMA_MEM_TO_DEV = 1) to satify Clang. Link: https://github.com/ClangBuiltLinux/linux/issues/159Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
- 20 Sep, 2018 1 commit
-
-
Boris Brezillon authored
Some combinations are simply not valid and should be rejected before the op is passed to the SPI controller driver. Add an spi_mem_check_op() helper and use it in spi_mem_exec_op() and spi_mem_supports_op() to make sure the spi-mem operation is valid. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
- 18 Sep, 2018 4 commits
-
-
David Lechner authored
This remove the check and subsequent return of error for the case when a SPI device requires SPI_CS_WORD and is also configured to use a GPIO for the CS line. Commit a134cc414e86 ("spi: always use software fallback for SPI_CS_WORD when using cs_gio") handles this case now, so this check is no longer necessary. Signed-off-by: David Lechner <david@lechnology.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
David Lechner authored
This modifies the condition for using the software fallback implementation for SPI_CS_WORD when the SPI controller is using a GPIO for the CS line. When using a GPIO for CS, the hardware implementation won't work, so we just enable the software fallback globally in this case. Signed-off-by: David Lechner <david@lechnology.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Peter Shih authored
Mediatek SPI driver modifies some fields (tx_buf, rx_buf, len, tx_dma, rx_dma) of the spi_transfer* passed in when doing transfer_one and in interrupt handler. This is somewhat unexpected, and there are some caller (e.g. Cr50 spi driver) that reuse the spi_transfer for multiple messages. Add a field to record how many bytes have been transferred, and calculate the right len / buffer based on it instead. Signed-off-by: Pi-Hsun Shih <pihsun@chromium.org> Change-Id: I23e218cd964f16c0b2b26127d4a5ca6529867673 Signed-off-by: Mark Brown <broonie@kernel.org>
-
Jonas Gorski authored
If the pll clock needs to be enabled to get its rate, it will also need to be enabled to provide it. So ensure it is kept enabled through the lifetime of the device. Fixes: 0d7412ed ("spi/bcm63xx-hspi: Enable the clock before calling clk_get_rate().") Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
- 17 Sep, 2018 6 commits
-
-
Lubomir Rintel authored
It makes no sense to remove the device on shutdown. And it break things when the hardware crucial for shutdown (such as the embedded controller) is attached to the SPI bus. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Mark Brown <broonie@kernel.org>
-
David Lechner authored
This adds support for the SPI_CS_WORD flag to the TI DaVinci SPI driver. This mode can be used as long as we are using the hardware chip select and not a GPIO chip select. Signed-off-by: David Lechner <david@lechnology.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Mark Brown authored
spi: Provide SPI_CS_WORD This provides a SPI operation mode which changes chip select after every word, used by some devices such as ADCs and DACs.
-
David Lechner authored
This adds a default software implementation for the SPI_CS_WORD flag for controllers that don't have such a feature. The SPI_CS_WORD flag indicates that the CS line should be toggled between each word sent, not just between each transfer. The implementation works by using existing functions to split transfers into one-word-sized transfers and sets the cs_change bit for each of the new transfers. Signed-off-by: David Lechner <david@lechnology.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
David Lechner authored
This adds a new SPI mode flag, SPI_CS_WORD, that is used to indicate that a SPI device requires the chip select to be toggled after each word that is transferred. Signed-off-by: David Lechner <david@lechnology.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Alexey Khoroshilov authored
Almost all spi drivers assign spi master->dev.of_node from its parent platform device without additional refcounting. It seems of_node_get() in pic32_sqi_probe() is unnecessary and there is no corresponding of_node_put(). Found by Linux Driver Verification project (linuxtesting.org) Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: Mark Brown <broonie@kernel.org>
-
- 13 Sep, 2018 1 commit
-
-
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/spi/spi-davinci.c: In function 'davinci_spi_setup': drivers/spi/spi-davinci.c:422:36: warning: variable 'pdata' set but not used [-Wunused-but-set-variable] Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
- 11 Sep, 2018 1 commit
-
-
Linus Walleij authored
The DaVinci SPI can use either: - Internal chip selects (inside the SPI host) - External chip selects (using GPIO) - External chip selects passed in pdata The last way of passing external chip selects through platform data is not used in the kernel. Delete it to make the code simpler when refactoring GPIO. Cc: Sekhar Nori <nsekhar@ti.com> Cc: Kevin Hilman <khilman@kernel.org> Cc: Michele Dionisio <michele.dionisio@gmail.com> Cc: Frode Isaksen <fisaksen@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
-
- 10 Sep, 2018 2 commits
-
-
Chuanhua Han authored
We need that to adjust the len of the 2nd transfer (called data in spi-mem) if it's too long to fit in a SPI message or SPI transfer. Fixes: c36ff266 ("spi: Extend the core to ease integration of SPI memory controllers") Cc: <stable@vger.kernel.org> Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Linus Walleij authored
There is a logical problem in spi-gpio with host just assigning a MOSI line and no MISO: this is interpreted as the host cannot do RX and the host is flagged with SPI_MASTER_NO_RX. This is wrong: since GPIO lines can switch direction, in 3WIRE operation the host will simply reverse the direction of the GPIO line and start reading from it, there is even code for doing this in the driver, but it went unnoticed because it was tested by using a master with 4 wires but a device using just 3 wires. Remove the offending flag. Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
-
- 07 Sep, 2018 2 commits
-
-
Alexey Khoroshilov authored
Almost all spi drivers assign spi master->dev.of_node from its parent platform device without additional refcounting. It seems of_node_get() in pic32_spi_probe() is unnecessary and there is no corresponding of_node_put(). Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: Mark Brown <broonie@kernel.org>
-
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/spi/spi-pl022.c: In function 'do_polling_transfer': drivers/spi/spi-pl022.c:1493:20: warning: variable 'chip' set but not used [-Wunused-but-set-variable] Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
- 06 Sep, 2018 2 commits
-
-
Simon Goldschmidt authored
The spi-dw driver currently only supports 8 or 16 bits per word. Since the hardware supports 4-16 bits per word, adapt the driver to also support this. Tested on socfpga cyclone5 with a 9-bit SPI display. Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/spi/spi-gpio.c: In function 'spi_gpio_remove': drivers/spi/spi-gpio.c:450:33: warning: variable 'pdata' set but not used [-Wunused-but-set-variable] Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
- 05 Sep, 2018 1 commit
-
-
Geert Uytterhoeven authored
spi_controller_{suspend,resume}() already prints an error message on failure, so there is no need to repeat this in individual drivers. Note: spi_master_{suspend,resume}() is an alias for spi_controller_{suspend,resume}(). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Reviewed-by: Daniel Mack <daniel@zonque.org> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
- 04 Sep, 2018 3 commits
-
-
Geert Uytterhoeven authored
- Print spaces as spaces, - Do not print characters > 126, as they will be shown as garbage in the modern UTF-8 era, - Use a normal period instead of its hexadecimal ASCII value, - Delimit the text part with pipe symbols on both sides (was left side only), without any spaces, to make it clear where the decoded text starts and ends, - Drop a useless comment. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Geert Uytterhoeven authored
Document support for the MSIOF module in the Renesas R-Car E3 (r8a77990) SoC. No driver update is needed. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Ulrich Hecht authored
Document support for the MSIOF module in the Renesas R-Car D3 (r8a77995) SoC. No driver update is needed. Signed-off-by: Ulrich Hecht <uli+renesas@fpond.eu> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Mark Brown <broonie@kernel.org>
-
- 03 Sep, 2018 1 commit
-
-
Kosta Zertsekel authored
This change increases the source code readability. Instead of using `spi->child[cs].direct_access.XXX` use `dir_acc->XXX`. Instead of using `orion_spi->child[cs].direct_access.vaddr` use `vaddr`. Signed-off-by: Kosta Zertsekel <zertsekel@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Jan Kundrát <jan.kundrat@cesnet.cz> Signed-off-by: Mark Brown <broonie@kernel.org>
-
- 31 Aug, 2018 1 commit
-
-
Alexandre Belloni authored
Define a mask for the IF_SI_OWNER field. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
- 30 Aug, 2018 1 commit
-
-
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/spi/spi-davinci.c: In function 'davinci_spi_chipselect': drivers/spi/spi-davinci.c:211:36: warning: variable 'pdata' set but not used [-Wunused-but-set-variable] Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-