This just facilitates the next changeset where we'll be building
the cpu list and mondo block in this helper function.
Signed-off-by: David S. Miller <davem@davemloft.net>

The idea is that we'll use this cpu list array and mondo block
even for non-hypervisor platforms.
Signed-off-by: David S. Miller <davem@davemloft.net>

Ideally this could be simplified further such that we could pass
the pointer down directly into the xcall_deliver() implementation.

But if we do that we need to do the "cpu_online(cpu)" and
"cpu != self" checks down in those functions.
Signed-off-by: David S. Miller <davem@davemloft.net>

We know the cpu is online and not the current cpu here.
Signed-off-by: David S. Miller <davem@davemloft.net>

For these cases the callers make sure:

1) The cpus indicated are online.

2) The current cpu is not in the list of indicated cpus.

Therefore we can pass a pointer to the mask directly.

One of the motivations in this transformation is to make use of
"&cpumask_of_cpu(cpu)" which evaluates to a pointer to constant
data in the kernel and thus takes up no stack space.

Hopefully someone in the future will change the interface of
arch_send_call_function_ipi() such that it passes a const cpumask_t
pointer so that this will optimize ever further.
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: David S. Miller <davem@davemloft.net>

There remained some spots still vectoring to the appropriate
*_xcall_deliver() function manually.
Signed-off-by: David S. Miller <davem@davemloft.net>

Initialize it using the smp_setup_processor_id() hook.
Signed-off-by: David S. Miller <davem@davemloft.net>

Removed duplicated #include <linux/tracehook.h> in
arch/sparc64/kernel/signal.c.
Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Based upon a bug report by Mariusz Kozlowski

It uses smp_call_function_masked() now, which has a preemption-disabled
requirement.
Signed-off-by: David S. Miller <davem@davemloft.net>

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: remove write-only variables from ext4_ordered_write_end
  ext4: unexport jbd2_journal_update_superblock
  ext4: Cleanup whitespace and other miscellaneous style issues
  ext4: improve ext4_fill_flex_info() a bit
  ext4: Cleanup the block reservation code path
  ext4: don't assume extents can't cross block groups when truncating
  ext4: Fix lack of credits BUG() when deleting a badly fragmented inode
  ext4: Fix ext4_ext_journal_restart()
  ext4: fix ext4_da_write_begin error path
  jbd2: don't abort if flushing file data failed
  ext4: don't read inode block if the buffer has a write error
  ext4: Don't allow lg prealloc list to be grow large.
  ext4: Convert the usage of NR_CPUS to nr_cpu_ids.
  ext4: Improve error handling in mballoc
  ext4: lock block groups when initializing
  ext4: sync up block and inode bitmap reading functions
  ext4: Allow read/only mounts with corrupted block group checksums
  ext4: Fix data corruption when writing to prealloc area

* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] 5182/1: pxa: Fix pcm990 compilation
  [ARM] Fix explicit asm(-arm)?/arch-foo references
  [ARM] move include/asm-arm to arch/arm/include/asm
  [ARM] Remove explicit dependency for misc.o from compressed/Makefile
  [ARM] initrd: claim initrd memory exclusively
  [ARM] pxa: add support for L2 outer cache on XScale3 (attempt 2)
  [ARM] 5180/1: at91: Fix at91_nand -> atmel_nand rename fallout
  [ARM] add Sascha Hauer as Freescale i.MX Maintainer
  [ARM] i.MX: add missing clock functions exports
  [ARM] i.MX: remove set_imx_fb_info() export
  [ARM] mx1ads: make mmc platform data available for modules
  [ARM] mx2: add missing Kconfig dependency

Compiling pcm990 produces an error:

In file included from arch/arm/mach-pxa/pcm990-baseboard.c:25:
include/linux/ide.h:645: error: 'CONFIG_IDE_MAX_HWIFS' undeclared here (not in a function)

Fix it by removing unneeded header include.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

The variables 'from' and 'to' are not used anywhere.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Acked-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

No file should be explicitly referencing its own platform headers
by specifying an absolute include path.  Fix these paths to use
standard <asm/arch/...> includes.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Move platform independent header files to arch/arm/include/asm, leaving
those in asm/arch* and asm/plat* alone.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

* git://git.infradead.org/users/dwmw2/random-2.6:
  [MTD] Fix !CONFIG_BLOCK compile for mtdsuper.c
  firmware: silence __fw_modbuild and __fw_modinst 'Nothing to be done' messages

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  sparc64: Do not clobber %g7 in setcontext() trap.
  sparc64: Kill __show_regs().
  sparc: Add __KERNEL__ ifdef protection to pt_regs helpers.
  sparc64: Kill smp_report_regs().
  sparc64: Kill VERBOSE_SHOWREGS code.
  sparc64: Hook up trigger_all_cpu_backtrace().
  sparc64: Make global reg dumping even more useful.
  sparc: Ignore drivers/video/console/promcon_tbl.c conmakehash generated file
  sparc64: FUTEX_OP_ANDN fix
  sparc: merge of_platform_{32,64}.h
  sparc64: Kill isa_bus_type.
  sparc64: Fix global reg snapshotting on self-cpu.

FAT has to handle the newly introduced ATTR_TIMES_SET for allow_utime
option.
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Brian Wang reported that a FUSE filesystem exported through NFS could
return I/O errors on read.  This was traced to splice_direct_to_actor()
returning a short or zero count when racing with page invalidation.

However this is not FUSE or NFSD specific, other filesystems (notably
NFS) also call invalidate_inode_pages2() to purge stale data from the
cache.

If this happens while such pages are sitting in a pipe buffer, then
splice(2) from the pipe can return zero, and read(2) from the pipe can
return ENODATA.

The zero return is especially bad, since it implies end-of-file or
disconnected pipe/socket, and is documented as such for splice.  But
returning an error for read() is also nasty, when in fact there was no
error (data becoming stale is not an error).

The same problems can be triggered by "hole punching" with
madvise(MADV_REMOVE).

Fix this by not clearing the PG_uptodate flag on truncation and
invalidation.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Acked-by: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

As reported by Adrian Bunk, commit d5686b44
(switch mtd and dm-table to lookup_bdev()) causes the following compile
error with CONFIG_BLOCK=n:

  CC      drivers/mtd/mtdsuper.o
drivers/mtd/mtdsuper.c: In function `get_sb_mtd':
drivers/mtd/mtdsuper.c:184: error: implicit declaration of function 'lookup_bdev'
drivers/mtd/mtdsuper.c:184: warning: assignment makes pointer from integer without a cast
drivers/mtd/mtdsuper.c:197: error: implicit declaration of function 'bdput'
make[3]: *** [drivers/mtd/mtdsuper.o] Error 1

Fix it by putting the block device lookup inside #ifdef CONFIG_BLOCK
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

People don't like them and think they're errors.

Leave the __fw_install one though; when 'make firmware_install' does
nothing, it's best to have a 'Nothing to be done for...' message rather
than just doing nothing.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] Move include/asm-ia64 to arch/ia64/include/asm

This fixes a bug in operator precedence in the newly introduced vc_translate
macro.  Without this fix, the translation of some characters on the
kernel console is garbled.

This patch was copied to the e-mail list previously for testing.  Now,
all reports confirm that it works, so this is an official post for
application.
Signed-off-by: Tim Bird <tim.bird@am.sony.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

Delete 2 EXPORTs that were accidentally sent upstream.
Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

I asked legal about the licensing of ftrace.txt, and they told me that,
unless the Documentation directory is specifically set up to handle non
GPL licenses (which it does not appear to be), then it would be best to
put ftrace.txt under the GPL.

This patch adds a dual license to ftrace.txt such that it is under both
the FDL and the GPL.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Wire up for FRV the system calls that were added in the last merge window.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Wire up system calls added in the last merge window for the MN10300 arch.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Currently function tty_ldisc_get() tries to load an ldisc driver module
only when tty_ldisc_try_get() returns -EAGAIN. This happens only if
module is being unloaded. If ldisc module is not loaded
tty_ldisc_try_get() returns -EINVAL and this case is not handled in
tty_ldisc_get(), so request_module() is not called.

Attached patch fixes this by calling request_module() if
tty_ldisc_try_get() returned any error code.

I discovered this when my UMTS modem stopped working with 2.6.27-rc1
because module ppp_async was not loaded.
Signed-off-by: Eugeniy Meshcheryakov <eugen@debian.org>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'kvm-updates-2.6.27' of git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm:
  KVM: s390: Fix kvm on IBM System z10
  KVM: Advertise synchronized mmu support to userspace
  KVM: Synchronize guest physical memory map to host virtual memory map
  KVM: Allow browsing memslots with mmu_lock
  KVM: Allow reading aliases with mmu_lock

* 'zero-len' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/misc-2.6:
  drivers/media, include/media: delete zero-length files

Some platform decide whether they support huge pages at boot time.  On
these, such as powerpc, HPAGE_SHIFT is a variable, not a constant, and is
set to 0 when there is no such support.

The patches to introduce multiple huge pages support broke that causing
the kernel to crash at boot time on machines such as POWER3 which lack
support for multiple page sizes.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ARCH=h8300:

init/main.c:781: undefined reference to `___early_initcall_end'

Same problem have
__start___bug_table
__stop___bug_table
__tracedata_start
__tracedata_end
__per_cpu_start
__per_cpu_end

When defining a symbol in vmlinux.lds, use the VMLINUX_SYMBOL macro.
VMLINUX_SYMBOL adds a prefix charactor.

You can't just use straight symbol names in common header files as they
dont take into consideration weird arch-specific ABI conventions.  in the
case of Blackfin/h8300, the ABI dictates that any C-visible symbols have
an underscore prefixed to them.  Thus all symbols in vmlinux.lds.h need to
be wrapped in VMLINUX_SYMBOL() so that each arch can put hide this magic
in their own files.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: "Mike Frysinger" <vapier.adi@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Each resource should be printed on its own line, so start snprintf'ing
at the beginning of the buffer every time through the loop.

Also, use scnprintf() rather than snprintf() when building up the
buffer to print.  scnprintf() returns the number of characters actually
written into the buffer (not including the trailing NULL).

snprintf() returns the number of characters that *would be* written,
assuming everything would fit in the buffer.  That's nice if we want to
resize the buffer to make sure everything fits, but in this case, I
just want to keep from overflowing the buffer, and it's OK if the
output is truncated.

Using snprintf() meant that my "len" could grow to be more than the
the buffer size, which makes "sizeof(buf) - len" negative, which causes
this alarming WARN_ON:
    http://marc.info/?l=linux-kernel&m=121736480005656&w=2

More useful snprintf/scnprintf discussion:
    http://lwn.net/Articles/69419/Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Reported-by: Pete Clements <clem@clem.clem-digital.net>
Cc: Rene Herman <rene.herman@keyaccess.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Some module parameters with only one line have the '\n' at the end of the
description.  This is not needed nor wanted as after the description the
type (i.e.  int) is followed by a newline.

Some modules contain a multi-line description, these are not affected
by this patch.
Signed-off-by: Niels de Vos <niels.devos@wincor-nixdorf.com>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: John W. Linville <linville@tuxdriver.com>
Cc: Ed L. Cashin <ecashin@coraid.com>
Cc: Dave Airlie <airlied@linux.ie>
Cc: Roland Dreier <rolandd@cisco.com>
Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  pata_it821x: Driver updates and reworking
  libata.h: replace __FUNCTION__ with __func__
  ata_piix: subsys 106b:00a3 is apple ich8m too
  libata-core: make sure that ata_force_tbl is freed in case of an error
  libata: update atapi disable handling
  pata_via: add VX800 flag; add function for fixing h/w bugs
  pata_ali: misplaced pci_dev_put()

* 'for-linus' of git://oss.sgi.com:8090/xfs/xfs-pull: (64 commits)
  [XFS] Remove vn_revalidate calls in xfs.
  [XFS] Now that xfs_setattr is only used for attributes set from ->setattr
  [XFS] xfs_setattr currently doesn't just handle the attributes set through
  [XFS] fix use after free with external logs or real-time devices
  [XFS] A bug was found in xfs_bmap_add_extent_unwritten_real(). In a
  [XFS] fix compilation without CONFIG_PROC_FS
  [XFS] s/XFS_PURGE_INODE/IRELE/g s/VN_HOLD(XFS_ITOV())/IHOLD()/
  [XFS] fix mount option parsing in remount
  [XFS] Disable queue flag test in barrier check.
  [XFS] streamline init/exit path
  [XFS] Fix up problem when CONFIG_XFS_POSIX_ACL is not set and yet we still
  [XFS] Don't assert if trying to mount with blocksize > pagesize
  [XFS] Don't update mtime on rename source
  [XFS] Allow xfs_bmbt_split() to fallback to the lowspace allocator
  [XFS] Restore the lowspace extent allocator algorithm
  [XFS] use minleft when allocating in xfs_bmbt_split()
  [XFS] attrmulti cleanup
  [XFS] Check for invalid flags in xfs_attrlist_by_handle.
  [XFS] Fix CI lookup in leaf-form directories
  [XFS] Use the generic xattr methods.
  ...

Add a reverse dependency of CONFIG_SGI_XP upon CONFIG_SGI_GRU to Kconfig.
Signed-off-by: Dean Nelson <dcn@sgi.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Add a dependency of CONFIG_SGI_XP upon CONFIG_NET to Kconfig.
Signed-off-by: Dean Nelson <dcn@sgi.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>