- 22 May, 2014 2 commits
-
-
Olof Johansson authored
Merge tag 'samsung-dt' of http://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/dt Samsung DT updates for v3.16 - exynos4 : add missing pinctrls - exynos4412-trats2 : update camera nodes and add rear camera nodes : rename alias for i2c_ak8975 label Update camera nodes for exynos4 and exynos4412-trats2 - exynos5250 : update DWC3 usb controller and enable to use generic USB DRD phy - exynos5250-snow : enable dp-controller, fimd, hdmi and pwm backlight : add sound node and Vbus regulator for USB 3.0 : add tps65090 power regulator : add pinctrl for EC irq and i2c-arbitrator - exynos5420 : change to correct compatible string for hdmi : add PD entry to MFC codec and enable DWC3 and USB 3.0 PHY : add MFC memory banks for smdk5420 and arndale-octa boards - exynos5420-peach-pit : add support exynos5420 based peach-pit board : add sound node and Vbus regulatro for USB 3.0 : enable dp-controller, fimd - exynos5420-smdk5420 : add Vbus regulatro for USB 3.0 - use generic DT bindings for map SYSRAM [olof: Fixed up conflict with a fix for 4212 secondary CPU startup, carrying over the fix to the reworked code] * tag 'samsung-dt' of http://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: (32 commits) ARM: dts: Add MFC memory banks to exynos5420 boards ARM: dts: enable dp-controller for exynos5420-peach-pit board ARM: dts: enable fimd for exynos5420 based peach-pit board ARM: dts: enable dp-controller for exynos5250-snow board ARM: dts: enable fimd for exynos5250-snow board ARM: dts: enable pwm backlight for exynos5250-snow ARM: dts: Add pwmX_out pinctrl nodes to exynos5250 ARM: dts: Add Vbus regulator for USB 3.0 on exynos5420-smdk5420 ARM: dts: Add Vbus regulator for USB 3.0 on exynos5420-peach-pit ARM: dts: Add Vbus regulator for USB 3.0 on exynos5250-snow ARM: dts: Add PD entry to MFC codec on exynos5420 ARM: dts: Add sound node for exynos5420-peach-pit board ARM: dts: Add sound node for exynos5250-snow board ARM: dts: Update DWC3 usb controller to use new phy driver for exynos5250 ARM: dts: Enable support for generic USB DRD phy for exynos5250 ARM: dts: Enable support for DWC3 controller for exynos5420 ARM: dts: Enable support for USB 3.0 PHY controller for exynos5420 ARM: dts: enable hdmi for exynos5420-peach-pit board ARM: dts: change to correct compatible string for exynos5420 hdmi ARM: dts: enable hdmi for exynos5250 based snow board ... Signed-off-by:
Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merging in Samsung fixes for 3.15-rc to avoid an annoying context conflict with new DT code. * commit '702b691e': ARM: dts: Remove g2d_pd node for exynos5420 ARM: dts: Remove mau_pd node for exynos5420 ARM: exynos_defconfig: enable HS-I2C to fix for mmc partition mount ARM: dts: disable MDMA1 node for exynos5420 ARM: EXYNOS: fix the secondary CPU boot of exynos4212 Signed-off-by:
-
- 21 May, 2014 3 commits
-
-
Olof Johansson authored
Merge tag 'tegra-for-3.16-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt Merge "ARM: tegra: device tree changes for 3.16" from Stephen Warren: The bulk of Tegra changes for 3.16 are to device trees. Highlights are: - New board support for: - Jetson TK1. - SHIELD. - Tegra Note 7. - Colibri T30 module. - HDMI support on Venice2. - SD card write-protect GPIOs added to some boards. - Numerous regulator cleanups. * tag 'tegra-for-3.16-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: ARM: tegra: initial add of Colibri T30 ARM: tegra: add device tree for SHIELD ARM: tegra: add SD wp-gpios to Venice2 DT ARM: tegra: add Tegra Note 7 device tree ARM: tegra: add SD wp-gpios to Dalmore DT ARM: tegra: add SD wp-gpios to Jetson TK1 DT ARM: tegra: use correct audio CODEC on Jetson TK1 ARM: tegra: dalmore - Add DSI power supply ARM: tegra: dalmore - Add +5V HDMI supply ARM: tegra: beaver - Add +5V HDMI supply ARM: tegra: harmony - Add +5V HDMI supply ARM: tegra: jetson-tk1 - Enable HDMI support ARM: tegra: venice2 - Enable HDMI ARM: tegra: Add Tegra124 HDMI support ARM: tegra: fix Venice2 SD card VQMMC supply ARM: tegra: make Venice's +3.3V_RUN regulator always on ARM: tegra: fix Jetson TK1 SD card supply ARM: tegra: define Jetson TK1 regulators ARM: tegra: add Jetson TK1 device tree Signed-off-by:
-
Olof Johansson authored
Merge tag 'imx-dt-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt Merge "ARM: imx: device tree changes for 3.16" from Shawn Guo: i.MX device tree changes for 3.16: - New board support: imx35-pdk, imx51-digi-connectcore, imx6dl-phytec, imx6dl-riotboard, and vf610-colibri. - Improve device tree support for imx51-babbage and eukrea-cpuimx51 to get the same level support as board files, so that we can kill the board files. - Quite some updates on imx27-phytec-phycore board support from Alexander Shiyan - Enable USB, sound and touchscreen on the eukrea imx25/35/51 boards, from Denis Carikli - Quite a lot of patches from Fabio Estevam, updating Freescale imx25-pdk and imx27-pdk board support - Correct USB device configuration for imx25/35 - Fixes i2c4 device node in imx6dl.dtsi regarding to compatible string and clock data - Enable HDMI, TVE, LVDS display support on a bunch of imx5/6 boards - Update PCIe to the new binding and enable PCIe support on imx6qdl-sabresd board - A couple of imx6q-dmo-edmqmx6 updates from Lucas Stach, adding pfuze irq gpio and SPI flash - Enable CODA7541 VPU for i.MX53 - A series of updates on imx6qdl-phytec boards from Philipp Zabel - Small cleanups and fixes on board imx28-duckbill - Michael Heimpold - Add stdout-path property to i.MX boards - Karo TX25 board updates from Sascha Hauer - Enable pwm and sdhc devices for board vf610-twr * tag 'imx-dt-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (105 commits) ARM: dts: imx35-pdk: Fix memory region description ARM: dts: imx51-eukrea-mbimxsd51-baseboard: Add CAN support ARM: dts: imx6: add new board RIoTboard ARM: dts: imx6: i2c4 cleanup ARM: dts: imx6: edmqmx6: add vcc and vio power supplies to stmpe ARM: dts: Karo TX25: use hardware ecc ARM: dts: Karo TX25: Add phy reset gpio and supply for FEC ARM: dts: Karo TX25: Add pinctrl nodes ARM: dts: i.MX25: Add IRAM node ARM: dts: i.MX25: Add mmc aliases ARM: dts: i.MX51 babbage: Fix FEC pad ctrl settings ARM: dts: imx6qdl-sabresd: Add USDHC4 support ARM: imx: add HDMI support for SolidRun HummingBoard and Cubox-i ARM: dts: imx6: edmqmx6: add SPI bus and flash ARM: dts: imx6: edmqmx6: add pinctrl for pfuze irq gpio ARM: dts: imx6q-udoo: Add HDMI support ARM: dts: Add stdout-path property to i.MX boards ARM: dts: imx: Fix LVDS mapping for Ventana GW52xx ARM: dts: imx: add LVDS backlight for Ventana ARM: dts: imx6qdl-sabresd: remove power-on gpio from pcie ... Signed-off-by:
-
https://github.com/mripard/linuxOlof Johansson authored
Merge "Allwinner DT additions for 3.16" from Maxime Ripard: - Introduction of the MMC controlers - New board: A10s R7, Mele M9, APP4-EVB1 - Enabled the PMU on the Cortex A7-based SoCs * tag 'sunxi-dt-for-3.16' of https://github.com/mripard/linux: (38 commits) ARM: sunxi: dt: declare the r_pio pin controller for A31 SoC ARM: sunxi: dt: add PRCM clk and reset controller subdevices ARM: sunxi: dt: add APP4-EVB1 board support ARM: sun6i: dt: Add support for the USB controllers ARM: sun6i: Add the USB clocks to the DTSI ARM: dts: sun5i: Add new A10s r7 hdmi tv dongle board ARM: dts: sun7i: Add reg_vcc3v3 to sun7i board mmc nodes ARM: dts: sun6i: Add reg_vcc3v3 to sun6i board mmc nodes ARM: dts: sun5i: Add reg_vcc3v3 to sun5i board mmc nodes ARM: dts: sun4i: Add reg_vcc3v3 to sun4i board mmc nodes ARM: dts: sunxi: Add reg_vcc3v3 supply to sunxi-common-regulators.dtsi ARM: dts: sun7i: Add basic support for the Cubietruck WiFi module ARM: dts: sun7i: Enable mmc controller on various A20 boards ARM: dts: sun7i: Add pin-muxing info for the mmc controllers ARM: dts: sun7i: Add mmc controller nodes ARM: dts: sun6i: Add new sun6i-a31-m9 dts file for Mele M9 ARM: dts: sun6i: Add mmc controller nodes ARM: dts: sun6i: Add mmc clocks ARM: dts: sun5i: Enable mmc controller on various A10s and A13 boards ARM: dts: sun5i: Add mmc controller nodes ... Signed-off-by:
-
- 20 May, 2014 5 commits
-
-
Olof Johansson authored
Merge tag 'renesas-dt3-for-v3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt Merge "Third Round of Renesas ARM Based SoC DT Updates for v3.16" from Simon Horman: r8a7791 (R-Car M2), r8a7779 (R-Car H1), r8a7778 (R-Car M1), r8a7740 (R-Mobile A1) and r8a73a4 (R-Mobile APE6) SoCs * Move interrupt-parent property to root node r8a7791 (R-Car M2) and r8a7790 (R-Car H2) SoCs * Add GPIO clocks r8a7791 (R-Car M2) based Henninger board * Add MSIOF0, QSPI and SDHI0/2 support * Specify EXTAL frequency r8a7779 (R-Car H1) based Marzen board * Set SMSC lan to use irq-push-pull r8a7740 (R-Mobile A1) SoC * Remove duplicate interrupt-parent property r8a7740 (R-Mobile A1) based Armadillo800 EVA board * Add Ethernet support * tag 'renesas-dt3-for-v3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: r8a7740 dtsi: Remove duplicate interrupt-parent property ARM: shmobile: marzen-reference: Set SMSC lan to use irq-push-pull ARM: shmobile: r8a7791 dtsi: Add GPIO clocks ARM: shmobile: r8a7790 dtsi: Add GPIO clocks ARM: shmobile: dts: Move interrupt-parent property to root node ARM: shmobile: armadillo-reference dts: Add Ethernet support ARM: shmobile: r8a7740 dtsi: Add Ethernet support ARM: shmobile: henninger: add MSIOF0 DT support ARM: shmobile: henninger: add QSPI DT support ARM: shmobile: henninger: add SDHI0/2 DT support ARM: shmobile: henninger: specify EXTAL frequency Signed-off-by:
-
git://github.com/at91linux/linux-at91Olof Johansson authored
Merge "at91: DT for 3.16 #2" from Nicolas Ferre: 3.16: second DT series: - at91sam9rl and at91sam9261 fixes about PLL ranges - at91sam9261 more comprehensive support for SSC - sama5d3 Xplained: addition of pull-ups, PWM and PMIC (regulator) * tag 'at91-dt2' of git://github.com/at91linux/linux-at91: ARM: at91/dt: at91-sama5d3_xplained: add the regulator device node ARM: at91: add 2 PWM outputs to SAMA5D3 Xplained ARM: at91: add PWM pinctrl to SAMA5D3 ARM: at91: add pull-up to i2c[02] on SAMA5D3 Xplained ARM: at91/dt: sam9rl: Fix PLL output range and mck divisors ARM: at91/dt: sam9261: Add ssc2, SSC clocks and pcks ARM: at91/dt: sam9261: Fix PLL output ranges and other clocks divisors Signed-off-by:
-
Olof Johansson authored
Merge tag 'keystone-dts' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into next/dt Merge "ARM: Keystone DTS updates for 3.16" from Santosh Shilimkar: Keystone DTS updates for 3.16 - Few of address cell warning fixes. - Add Lamarr and Edision EVM NOR flash and NAND devices. - Update dts to make use of dma-ranges and dma-coherent properties. * tag 'keystone-dts' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone: ARM: dts: keystone-evm: add spi nor flash support ARM: dts: k2l-evm: add AEMIF/NAND device entry ARM: dts: k2e-evm: add AEMIF/NAND device entry ARM: dts: keystone: Update USB node for dma properties ARM: dts: keystone: Use dma-ranges property ARM: dts: keystone: add cell's information to spi nodes ARM: dts: keystone: move i2c0 device node from SoC to board files ARM: dts: keystone: add cell's information to i2c nodes ARM: dts: keystone: drop address and size cells from GIC node Signed-off-by:
-
Olof Johansson authored
Merge tag 'v3.16-rockchip-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt Merge "ARM: rockchip: devicetree changes for v3.16" from Heiko Stübner: Addition of missing board compatible names and their vendor-prefixes as well as the dts portions of the pinctrl rework. * tag 'v3.16-rockchip-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: convert pinctrl nodes to new bindings ARM: dts: rockchip: add root compatible properties of: add mundoreader and radxa vendor prefixes Signed-off-by:
-
git://git.infradead.org/linux-mvebuOlof Johansson authored
Merge "ARM: mvebu: DT changes for v3.16" from Jason Cooper: mvebu DT changes for v3.16 - kirkwood - rework nsa3x0 board to add nsa320 - large cleanup to facilitate use in barebox - guruplug phy updates - audio updates for t5325 - mvebu - use clocks vice clock-frequency for uart nodes - armada 375/380/385 - add watchdog node - add coherency fabric - add smp support - add sdhci - add ahci - add thermal sensor - armada 370/XP - and pmsu * tag 'mvebu-dt-3.16' of git://git.infradead.org/linux-mvebu: (35 commits) ARM: Kirkwood: t5325: Use simple card to instantiate audio ARM: Kirkwood: DT: Add missing #sound-dai-cells property ARM: Kirkwood: Add node for audio codec ARM: dts: kirkwood: set Guruplug phy-connection-type to rgmii-id ARM: dts: kirkwood: set Guruplug ethernet PHY compatible ARM: dts: kirkwood: set default pinctrl for I2C1 on 6282 ARM: dts: kirkwood: set default pinctrl for I2C0 ARM: dts: kirkwood: set default pinctrl for NAND ARM: dts: kirkwood: set default pinctrl for SPI0 ARM: dts: kirkwood: set default pinctrl for UART0/1 ARM: dts: kirkwood: set default pinctrl for GBE1 ARM: dts: kirkwood: consolidate common pinctrl settings ARM: dts: kirkwood: add pinctrl node to common SoC include ARM: dts: kirkwood: rename pin-controller nodes ARM: dts: kirkwood: remove clock-frequency properties from UART nodes ARM: dts: kirkwood: add stdout-path property to all boards ARM: dts: kirkwood: add node labels ARM: mvebu: Enable the thermal sensor in Armada 380/385 SoC ARM: mvebu: Enable the thermal sensor in Armada 375 SoC ARM: mvebu: don't use clocks property in UART node for Netgear RN2120 ... Signed-off-by:
-
- 19 May, 2014 20 commits
-
-
Sachin Kamat authored
Add MFC memory banks to Exynos5420 based SMDK and Arndale-octa boards. Signed-off-by:
Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by:
Kukjin Kim <kgene.kim@samsung.com>
-
Rahul Sharma authored
Enable dp-controller for peach-pit board. Signed-off-by:
Rahul Sharma <rahul.sharma@samsung.com> Signed-off-by:
-
Rahul Sharma authored
Enable fimd for peach-pit board. Signed-off-by:
-
Rahul Sharma authored
Enable dp-controller for snow board. Signed-off-by:
-
Rahul Sharma authored
Enable fimd node for snow board. Signed-off-by:
-
Ajay Kumar authored
Add PWM backlight node for exynos5250 based snow board. Signed-off-by:
Ajay Kumar <ajaykumar.rs@samsung.com> Signed-off-by:
-
Ajay Kumar authored
Adds the PWM nodes to 5250 pinctrl dtsi file. Signed-off-by:
-
Vivek Gautam authored
Add required fixed-regulator for VBUS supply for USB 3.0 controller phy. Signed-off-by:
Vivek Gautam <gautam.vivek@samsung.com> Signed-off-by:
-
Vivek Gautam authored
Add required fixed-regulator for VBUS supply for USB 3.0 controller phy. Signed-off-by:
-
Vivek Gautam authored
Add required fixed-regulator for VBUS supply for USB 3.0 controller phy. Signed-off-by:
-
Sachin Kamat authored
PD entry was missing in MFC codec node. Signed-off-by:
-
Tushar Behera authored
The audio setup on Peach-pit board is similar to Snow board, hence the sound-card driver used on Snow board can be reused on Peach-pit board. Peach-pit board uses MAX98090 audio codec. Signed-off-by:
Tushar Behera <tushar.behera@linaro.org> Signed-off-by:
-
Tushar Behera authored
The audio codec on Snow board, MAX98095 is connected on I2C7 bus. Also it requires the GPX1-7 line to be pulled up. Updated Snow DTS file to incorporate above changes and added a sound node to instantiate the I2S-based sound card. Signed-off-by:
-
Vivek Gautam authored
Removing the dt node for older usb3 phy driver from Exynos5250 device tree and updating the dt node for DWC3 controller to use new phy driver based on generic phy framework. Signed-off-by:
Tomasz Figa <t.figa@samsung.com> Signed-off-by:
-
Vivek Gautam authored
Add device tree node for new usbdrd-phy driver, which is based on generic phy framework. Signed-off-by:
-
Vivek Gautam authored
Add device tree nodes for DWC3 controller present on Exynos 5420 SoC, to enable support for USB 3.0. Signed-off-by:
-
Vivek Gautam authored
Add device tree nodes for USB 3.0 PHY present alongwith USB 3.0 controller Exynos 5420 SoC. This phy driver is based on generic phy framework. Signed-off-by:
-
Rahul Sharma authored
Enable hdmi for exynos5420 based peach-pit board. Signed-off-by:
-
Rahul Sharma authored
Replace compatible string for HDMI node in Exynos5420. Since latest restructring in Drm hdmi driver, it is agreed to use a seperate compatible string for Exynos5420 HDMI IP siince it uses APB mapped Phy. Signed-off-by:
-
Rahul Sharma authored
Enable support for HDMI for exynos5250 based Snow board. Signed-off-by:
-
- 16 May, 2014 10 commits
-
-
Olof Johansson authored
Merge tag 'socfpga-dt-updates-for-3.16_v3' of git://git.rocketboards.org/linux-socfpga-next into next/dt Merge "dts: socfpga: general updates for the socfpga platform" from Dinh Nguyen: Mostly DTS additions to the SOCFPGA platform from Steffan Trumtrar, and a couple of device tree documentation updates/typo fix. This one does not the GPIO binding patch, as that is pending further discussion. Also, v3 fixes a rebase artifact and compile tested. * tag 'socfpga-dt-updates-for-3.16_v3' of git://git.rocketboards.org/linux-socfpga-next: ARM: socfpga: dts: Add div-reg to the main_pll clocks ARM: socfpga: dts: add reset-controller Documentation: dt: reset: move socfpga-reset Documentation: dt: socfpga: add reset-cells property ARM: socfpga: dts: Add DTS entries for USB ARM: socfpga: dts: Remove hard coded clock-frequency property ARM: socfpga: dts: add eeprom and rtc on i2c0 ARM: socfpga: dts: convert to preprocessor includes ARM: socfpga: dts: add rtc on i2c0 to socrates ARM: socfpga: dts: add support for EBV SOCrates ARM: socfpga: dts: add can0+1 ARM: socfpga: dts: add i2c busses ARM: socfpga: dts: add remaining interrupts for pdma ARM: socfpga: dts: fix pdma interrupt Signed-off-by:
-
Fabio Estevam authored
On imx35pdk there are two DRAM chip selects that are used: CS0 at 0x80000000 CS1 at 0x90000000 Each bank is connected to 128MB of DRAM, giving a total of 256MB of system DRAM. Fix the memory layout to describe the hardware appropriately. Signed-off-by:
Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by:
Shawn Guo <shawn.guo@freescale.com>
-
Fabio Estevam authored
Add support for CAN based on a MCP2515 connected to ECSPI1. Signed-off-by:
Eric Bénard <eric@eukrea.com> Signed-off-by:
-
Iain Paton authored
add element14s RIoTboard http://www.riotboard.org which is an i.MX6Solo based design targeted at makers. Signed-off-by: Iain Paton<ipaton0@gmail.com> Reviewed-by:
-
Iain Paton authored
add missing i2c4 clock and correct the compatible string to match other imx6 i2c blocks Signed-off-by: Iain Paton<ipaton0@gmail.com> Reviewed-by:
-
Silvio Fricke authored
Signed-off-by:
Silvio Fricke <silvio.fricke@gmail.com> Acked-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Sascha Hauer authored
We should use hardware ecc on i.MX. While at it, add the optional nand-bus-width property. Signed-off-by:
Sascha Hauer <s.hauer@pengutronix.de> Acked-by:
Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by:
-
Sascha Hauer authored
Signed-off-by:
-
Sascha Hauer authored
Signed-off-by:
-
Sascha Hauer authored
Signed-off-by:
-
