- 03 Nov, 2015 30 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68kLinus Torvalds authored
Pull m68k update from Geert Uytterhoeven. * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k/sun3: Use %pM format specifier to print ethernet address
-
git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-ledsLinus Torvalds authored
Pull LED updates from Jacek Anaszewski: - Move the out-of-LED-tree led-sead3 driver to the LED subsystem. - Add 'invert' sysfs attribute to the heartbeat trigger. - Add Device Tree support to the leds-netxbig driver and add related DT nodes to the kirkwood-netxbig.dtsi and kirkwood-net5big.dts files. Remove static LED setup from the related board files. - Remove redundant brightness conversion operation from leds-netxbig. - Improve leds-bcm6328 driver: improve default-state handling, add more init configuration options, print invalid LED instead of warning only about maximum LED value. - Add a shutdown function for setting gpio-leds into off state when shutting down. - Fix DT flash timeout property naming in leds-aat1290.txt. - Switch to using devm prefixed version of led_classdev_register() (leds-cobalt-qube, leds-hp6xx, leds-ot200, leds-ipaq-micro, leds-netxbig, leds-locomo, leds-menf21bmc, leds-net48xx, leds-wrap). - Add missing of_node_put (leds-powernv, leds-bcm6358, leds-bcm6328, leds-88pm860x). - Coding style fixes and cleanups: led-class/led-core, leds-ipaq-micro. * tag 'leds_for_4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: (27 commits) leds: 88pm860x: add missing of_node_put leds: bcm6328: add missing of_node_put leds: bcm6358: add missing of_node_put powerpc/powernv: add missing of_node_put leds: leds-wrap.c: Use devm_led_classdev_register leds: aat1290: Fix property naming of flash-timeout-us leds: leds-net48xx: Use devm_led_classdev_register leds: leds-menf21bmc.c: Use devm_led_class_register leds: leds-locomo.c: Use devm_led_classdev_register leds: leds-gpio: add shutdown function Documentation: leds: update DT bindings for leds-bcm6328 leds-bcm6328: add more init configuration options leds-bcm6328: simplify and improve default-state handling leds-bcm6328: print invalid LED leds: netxbig: set led_classdev max_brightness leds: netxbig: convert to use the devm_ functions ARM: mvebu: remove static LED setup for netxbig boards ARM: Kirkwood: add LED DT entries for netxbig boards leds: netxbig: add device tree binding leds: triggers: add invert to heartbeat ...
-
Julia Lawall authored
for_each_child_of_node performs an of_node_get on each iteration, so a break out of the loop requires an of_node_put. A simplified version of the semantic patch that fixes this problem is as follows (http://coccinelle.lip6.fr): // <smpl> @@ local idexpression n; expression e,r; @@ for_each_child_of_node(r,n) { ... ( of_node_put(n); | e = n | + of_node_put(n); ? break; ) ... } ... when != n // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
-
Julia Lawall authored
for_each_available_child_of_node performs an of_node_get on each iteration, so a break out of the loop requires an of_node_put. A simplified version of the semantic patch that fixes this problem is as follows (http://coccinelle.lip6.fr): // <smpl> @@ expression root,e; local idexpression child; @@ for_each_available_child_of_node(root, child) { ... when != of_node_put(child) when != e = child ( return child; | + of_node_put(child); ? return ...; ) ... } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
-
Julia Lawall authored
for_each_available_child_of_node performs an of_node_get on each iteration, so a break out of the loop requires an of_node_put. A simplified version of the semantic patch that fixes this problem is as follows (http://coccinelle.lip6.fr): // <smpl> @@ expression root,e; local idexpression child; @@ for_each_available_child_of_node(root, child) { ... when != of_node_put(child) when != e = child ( return child; | + of_node_put(child); ? return ...; ) ... } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
-
Julia Lawall authored
for_each_child_of_node performs an of_node_get on each iteration, so a break out of the loop requires an of_node_put. A simplified version of the semantic patch that fixes this problem is as follows (http://coccinelle.lip6.fr): // <smpl> @@ expression root,e; local idexpression child; @@ for_each_child_of_node(root, child) { ... when != of_node_put(child) when != e = child ( return child; | + of_node_put(child); ? return ...; ) ... } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
-
Fida Mohammad authored
Use of resource managed function devm_led_classdev_register to make initialization path simpler. Also removed redundant remove function. Signed-off-by: Fida Mohammad <fmthoker@gmail.com> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
-
Ingi Kim authored
flash-timeout-us property name is changed to flash-max-timeout-us. This patch fixes that name. Signed-off-by: Ingi Kim <ingi2.kim@samsung.com> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
-
Muhammad Falak R Wani authored
Use devm_led_classdev_register instead of led_classdev_register, removing the redundant net48xx_led_remove function. Signed-off-by: Muhammad Falak R Wani <falakreyaz@gmail.com> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
-
Muhammad Falak R Wani authored
Use resource-managed function devm_led_classdev_register instead of led_classdev_register, consequently remove redundant menf21bmc_led_remove function. Also drop the unneeded label err_free_leds. Signed-off-by: Muhammad Falak R Wani <falakreyaz@gmail.com> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
-
Fida Mohammad authored
Use resource managed function devm_led_classdev_register to make initialisation path simpler. Also removed redundant led_classdev_unregister function. Signed-off-by: Fida Mohammad <fmthoker@gmail.com> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
-
Heiko Schocher authored
add a shutdown function for setting the gpio-leds into off state when shuting down. Signed-off-by: Heiko Schocher <hs@denx.de> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
-
Álvaro Fernández Rojas authored
This patch adds latest DT bindings for leds-bcm6328 init register configuration. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
-
Álvaro Fernández Rojas authored
This patch adds more init register configuration options: - Serial LEDs multiplexing. - Serial LEDs clock signal low/high polarity. - Serial LEDs data signal low/high polarity. - Serial LEDs shift direction inverted/normal. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
-
Álvaro Fernández Rojas authored
This patch simplifies and improves the code related to default-state handling. It also changes the code to power off the LEDs by default. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
-
Álvaro Fernández Rojas authored
Print invalid LED instead of warning only about maximum LED value. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
-
Simon Guinot authored
This patch sets the led_classdev max_brightness to the maximum level value supported by hardware. This allows to get rid of the brightness conversion operation (from software [0:LED_FULL] to hardware ranges) in brightness_set(). Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
-
Simon Guinot authored
This patch converts the leds-netxbig driver to use the devres functions devm_gpio_request_one() and devm_led_classdev_register(). This allows to simplify the code a bit. Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
-
Simon Guinot authored
Since DT support is now available for the LEDs found on the LaCie netxbig boards (Kirkwood-based), then the old-fashion netxbig board setup file is no longer needed. This patch removes this file. Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
-
Simon Guinot authored
This patch adds DT entries for the LEDs found on the Kirkwood-based LaCie boards 2Big and 5Big Network v2. Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
-
Simon Guinot authored
This patch adds device tree support for the netxbig LEDs. This also introduces a additionnal DT binding for the GPIO extension bus (netxbig-gpio-ext) used to configure the LEDs. Since this bus could also be used to control other devices, then it seems more suitable to have it in a separate DT binding. Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
-
Jiri Prchal authored
This patch adds possibility to invert heartbeat blinking. The inverted LED is more time ON then OFF. It's because it looks better when the heartbeat LED is next to other LED which is most time ON. The invert value is exported same way via sysfs in file invert like oneshot. I get inspiration from this trigger. Signed-off-by: Jiri Prchal <jiri.prchal@aksignal.cz> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
-
Jacek Anaszewski authored
Since the API for controlling LED brightness and blinking is defined in the LED core, move the related timer and work callbacks to the led-core.c, and initialize them through a new led_core_init API. Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com> Acked-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Pavel Machek <pavel@ucw.cz>
-
Ralf Baechle authored
Fixes the following randconfig problem leds-sead3.c:(.text+0x7dc): undefined reference to `led_classdev_unregister' leds-sead3.c:(.text+0x7e8): undefined reference to `led_classdev_unregister' Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Cc: Bryan Wu <cooloney@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-leds@vger.kernel.org Cc: linux-mips@linux-mips.org Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
-
Muhammad Falak R Wani authored
Spaces at the starting of a line are removed, indentation using tab, instead of space. Also, line width of more than 80 characters is also taken care of. Two warnings are left alone to aid better readability. Signed-off-by: Muhammad Falak R Wani <falakreyaz@gmail.com> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
-
Muhammad Falak R Wani authored
Use of resource-managed function devm_led_classdev_register instead of led_classdev_register is preferred, consequently remove redundant function micro_leds_remove. Signed-off-by: Muhammad Falak R Wani <falakreyaz@gmail.com> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
-
Muhammad Falak R Wani authored
Use resource-managed function devm_led_classdev_register instead of led_classdev_register to make the error path simpler. The goto is replaced with direct return, unneeded label err is dropped. Also, remove redundant ot200_led_remove. Signed-off-by: Muhammad Falak R Wani <falakreyaz@gmail.com> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
-
Muhammad Falak R Wani authored
Use resource-managed function devm_led_classdev_register instead of led_classdev_register to simplify error path. An unnecessary check of ret is replaced with a direct return Also, remove redundant hp6xxled_remove. Signed-off-by: Muhammad Falak R Wani <falakreyaz@gmail.com> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
-
Vaishali Thakkar authored
Use resource-managed function devm_led_classdev_register instead of led_classdev_register to make the error-path simpler. To be compatible with the change, goto is replaced with direct return, unneeded label err_null is dropped and unnecessary variable retval is removed. Also, remove redundant cobalt_qube_led_remove. Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmapLinus Torvalds authored
Pull regmap updates from Mark Brown: "Quite a few new features for regmap this time, mostly expanding things around the edges of the existing functionality to cover more devices rather than thinsg with wide applicability: - Support for offload of the update_bits() operation to hardware where devices implement bit level access. - Support for a few extra operations that need scratch buffers on fast_io devices where we can't sleep. - Expanded the feature set of regmap_irq to cope with some extra register layouts. - Cleanups to the debugfs code" * tag 'regmap-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: Allow installing custom reg_update_bits function regmap: debugfs: simplify regmap_reg_ranges_read_file() slightly regmap: debugfs: use memcpy instead of snprintf regmap: debugfs: use snprintf return value in regmap_reg_ranges_read_file() regmap: Add generic macro to define regmap_irq regmap: debugfs: Remove scratch buffer for register length calculation regmap: irq: add ack_invert flag for chips using cleared bits as ack regmap: irq: add support for chips who have separate unmask registers regmap: Allocate buffers with GFP_ATOMIC when fast_io == true
-
- 02 Nov, 2015 8 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpioLinus Torvalds authored
Pull GPIO updates from Linus Walleij: "Here is the bulk of GPIO changes for the v4.4 development cycle. The only changes hitting outside drivers/gpio are in the pin control subsystem and these seem to have settled nicely in linux-next. Development mistakes and catfights are nicely documented in the reverts as you can see. The outcome of the ABI fight is that we're working on a chardev ABI for GPIO now, where hope to show results for the v4.5 kernel. Summary of changes: GPIO core: - Define and handle flags for open drain/open collector and open source/open emitter, also know as "single-ended" configurations. - Generic request/free operations that handle calling out to the (optional) pin control backend. - Some refactoring related to an ABI change that did not happen, yet provide useful. - Added a real-time compliance checklist. Many GPIO chips have irqchips, and need to think this over with the RT patches going upstream. - Restructure, fix and clean up Kconfig menus a bit. New drivers: - New driver for AMD Promony. - New driver for ACCES 104-IDIO-16, a port-mapped I/O card, ISA-style. Very retro. Subdriver changes: - OMAP changes to handle real time requirements. - Handle trigger types for edge and level IRQs on PL061 properly. As this hardware is very common it needs to set a proper example for others to follow. - Some container_of() cleanups. - Delete the unused MSM driver in favor of the driver that is embedded inside the pin control driver. - Cleanup of the ath79 GPIO driver used by many, many OpenWRT router targets. - A consolidated IT87xx driver replacing the earlier very specific IT8761e driver. - Handle the TI TCA9539 in the PCA953x driver. Also handle ACPI devices in this subdriver. - Drop xilinx arch dependencies as these FPGAs seem to profilate over a few different architectures. MIPS and ARM come to mind" * tag 'gpio-v4.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (57 commits) gpio: fix up SPI submenu gpio: drop surplus I2C dependencies gpio: drop surplus X86 dependencies gpio: dt-bindings: document the official use of "ngpios" gpio: MAINTAINERS: Add an entry for the ATH79 GPIO driver gpio / ACPI: Allow shared GPIO event to be read via operation region gpio: group port-mapped I/O drivers in a menu gpio: Add ACCES 104-IDIO-16 driver maintainer entry gpio: zynq: Document interrupt-controller DT binding gpio: xilinx: Drop architecture dependencies gpio: generic: Revert to old error handling in bgpio_map gpio: add a real time compliance notes Revert "gpio: add a real time compliance checklist" gpio: Add GPIO support for the ACCES 104-IDIO-16 gpio: driver for AMD Promontory gpio: xlp: Convert to use gpiolib irqchip helpers gpio: add a real time compliance checklist gpio/xilinx: enable for MIPS gpiolib: Add and use OF_GPIO_SINGLE_ENDED flag gpiolib: Split GPIO flags parsing and GPIO configuration ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlLinus Torvalds authored
Pull pin control updates from Linus Walleij: "This is the big bulk of pin control changes for the v4.4 kernel development cycle. Development pace is high in pin control again this merge window. 28 contributors, 83 patches. It hits a few sites outside the pin control subsystem: - Device tree bindings in Documentation (as usual) - MAINTAINERS - drivers/base/* for the "init" state handling by Doug Anderson. This has been ACKed by Greg. - drivers/usb/renesas_usbhs/rcar2.c, for a dependent Renesas change in the USB subsystem. This has been ACKed by both Greg and Felipe. - arch/arm/boot/dts/sama5d2.dtsi - this should ideally have gone through the ARM SoC tree but ended up here. This time I am using Geert Uytterhoeven as submaintainer for SH PFC since the are three-four people working in parallel with new Renesas ASICs. Summary of changes: Infrastructure: - Doug Anderson wrote a patch adding an "init" state different from the "default" state for pin control state handling in the core framework. This is applied before the driver's probe() call if defined and takes precedence over "default". If both are defined, "init" will be applied *before* probe() and "default" will be applied *after* probe(). Significant subdriver improvements: - SH PFC is switched to getting GPIO ranges from the device tree ranges property on DT platforms. - Got rid of CONFIG_ARCH_SHMOBILE_LEGACY, we are all modernized. - Got rid of SH PFC hardcoded IRQ numbers. - Allwinner sunxi external interrupt through the "r" controller. - Moved the Cygnus driver to use DT-provided GPIO ranges. New drivers: - Atmel PIO4 pin controller for the SAMA4D2 family New subdrivers: - Rockchip RK3036 subdriver - Renesas SH PFC R8A7795 subdriver - Allwinner sunxi A83T PIO subdriver - Freescale i.MX7d iomux lpsr subdriver - Marvell Berlin BG4CT subdriver - SiRF Atlas 7 step B SoC subdriver - Intel Broxton SoC subdriver Apart from this, the usual slew if syntactic and semantic fixes" * tag 'pinctrl-v4.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (81 commits) pinctrl: pinconf: remove needless loop pinctrl: uniphier: guard uniphier directory with CONFIG_PINCTRL_UNIPHIER pinctrl: zynq: fix UTF-8 errors pinctrl: zynq: Initialize early pinctrl: at91: add missing of_node_put pinctrl: tegra-xusb: Correct lane mux options pinctrl: intel: Add Intel Broxton pin controller support pinctrl: intel: Allow requesting pins which are in ACPI mode as GPIOs pinctrl: intel: Add support for multiple GPIO chips sharing the interrupt drivers/pinctrl: Add the concept of an "init" state pinctrl: uniphier: set input-enable before pin-muxing pinctrl: cygnus: Add new compatible string for gpio controller driver pinctrl: cygnus: Remove GPIO to Pinctrl pin mapping from driver pinctrl: cygnus: Optional DT property to support pin mappings pinctrl: sunxi: Add irq pinmuxing to sun6i "r" pincontroller pinctrl: sunxi: Fix irq_of_xlate for the r_pio pinctrl block pinctrl: sh-pfc: Remove obsolete r8a7778 platform_device_id entry pinctrl: sh-pfc: Remove obsolete r8a7779 platform_device_id entry pinctrl: sh-pfc: Stop including <linux/platform_data/gpio-rcar.h> usb: renesas_usbhs: Remove unneeded #include <linux/platform_data/gpio-rcar.h> ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/bp/bpLinus Torvalds authored
Pull EDAC updates from Borislav Petkov: "A bunch of fixes all over the place and some hw enablement this time. - Convert EDAC to debugfs wrappers and make drivers use those (Borislav Petkov) - L3 and SoC support for xgene_edac (Loc Ho) - AMD F15h, models 0x60-6f support to amd64_edac (Aravind Gopalakrishnan) - Fixes and cleanups all over the place" * tag 'edac_for_4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: (22 commits) EDAC: Fix PAGES_TO_MiB macro misuse EDAC, altera: SoCFPGA EDAC should not look for ECC_CORR_EN EDAC: Use edac_debugfs_remove_recursive() EDAC, ppc4xx_edac: Fix module autoload for OF platform driver Documentation/EDAC: Add reference documents section for amd64_edac EDAC, amd64_edac: Update copyright and remove changelog EDAC, amd64_edac: Extend scrub rate support to F15hM60h EDAC: Don't allow empty DIMM labels EDAC: Fix sysfs dimm_label store operation EDAC: Fix sysfs dimm_label show operation arm64, EDAC: Add L3/SoC DT subnodes to the APM X-Gene SoC EDAC node EDAC, xgene: Add SoC support EDAC, xgene: Fix possible sprintf() overflow issue EDAC, xgene: Add L3 support EDAC, Documentation: Update X-Gene EDAC binding for L3/SoC subnodes EDAC, sb_edac: Fix TAD presence check for sbridge_mci_bind_devs() EDAC, ghes_edac: Remove redundant memory_type array EDAC, xgene: Convert to debugfs wrappers EDAC, i5100: Convert to debugfs wrappers EDAC, altera: Convert to debugfs wrappers ...
-
git://git.linaro.org/people/ulf.hansson/mmcLinus Torvalds authored
Pull MMC updates from Ulf Hansson: "MMC core: - Add new API to set VCCQ voltage - mmc_regulator_set_vqmmc() - Add new ioctl to allow userspace to send multi commands - Wait for card busy signalling before starting SDIO requests - Remove MMC_CLKGATE - Enable tuning for DDR50 mode - Some code clean-up/improvements to mmc pwrseq - Use highest priority for eMMC restart handler - Add DT bindings for eMMC hardware reset support - Extend the mmc_send_tuning() API - Improve ios show for debugfs - A couple of code optimizations MMC host: - Some generic OF improvements - Various code clean-ups - sirf: Add support for DDR50 - sunxi: Add support for card busy detection - mediatek: Use MMC_CAP_RUNTIME_RESUME - mediatek: Add support for eMMC HW-reset - mediatek: Add support for HS400 - dw_mmc: Convert to use the new mmc_regulator_set_vqmmc() API - dw_mmc: Add external DMA interface support - dw_mmc: Some various improvements - dw_mmc-rockchip: MMC tuning with the clock phase framework - sdhci: Properly clear IRQs during resume - sdhci: Enable tuning for DDR50 mode - sdhci-of-esdhc: Use IRQ mode for card detection - sdhci-of-esdhc: Support both BE and LE host controller - sdhci-pci: Build o2micro support in the same module - sdhci-pci: Support for new Intel host controllers - sdhci-acpi: Support for new Intel host controllers" * tag 'mmc-v4.4' of git://git.linaro.org/people/ulf.hansson/mmc: (73 commits) mmc: dw_mmc: fix the wrong setting for UHS-DDR50 mode mmc: dw_mmc: fix the CardThreshold boundary at CardThrCtl register mmc: dw_mmc: NULL dereference in error message mmc: pwrseq: Use highest priority for eMMC restart handler mmc: mediatek: add HS400 support mmc: mmc: extend the mmc_send_tuning() mmc: mediatek: add implement of ops->hw_reset() mmc: mediatek: fix got GPD checksum error interrupt when data transfer mmc: mediatek: change the argument "ddr" to "timing" mmc: mediatek: make cmd_ints_mask to const mmc: dt-bindings: update Mediatek MMC bindings mmc: core: Add DT bindings for eMMC hardware reset support mmc: omap_hsmmc: Enable omap_hsmmc for Keystone 2 mmc: sdhci-acpi: Add more ACPI HIDs for Intel controllers mmc: sdhci-pci: Add more PCI IDs for Intel controllers arm: lpc18xx_defconfig: remove CONFIG_MMC_DW_IDMAC arm: hisi_defconfig: remove CONFIG_MMC_DW_IDMAC arm: exynos_defconfig: remove CONFIG_MMC_DW_IDMAC arc: axs10x_defconfig: remove CONFIG_MMC_DW_IDMAC mips: pistachio_defconfig: remove CONFIG_MMC_DW_IDMAC ...
-
Linus Torvalds authored
Merge tag 'hwmon-for-linus-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon updates from Guenter Roeck: "New driver for MAX31790, added support for TMP75C, as well as cleanups and minor improvements in various drivers" * tag 'hwmon-for-linus-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (fam15h_power) Add max compute unit accumulated power hwmon: (fam15h_power) Enable power1_input on AMD Carrizo hwmon: (fam15h_power) Refactor attributes for dynamically added hwmon: (ina2xx) remove no longer used variable 'kind' hwmon: (nct6775) Introduce separate temperature labels for NCT6792 and NCT6793 hwmon: (nct6775) NCT6791D and NCT6792D have an additional temperature source hwmon: (ina2xx) give precedence to DT over checking for platform data. hwmon: (ina2xx) convert driver to using regmap hwmon: (coretemp) Increase limit of maximum core ID from 32 to 128. hwmon: (lm75) Add support for TMP75C hwmon: (ibmpowernv) Add OF compatibility table entry hwmon: (abx500) drop the use of IRQF_NO_SUSPEND hwmon: (max31790) Fix dereference of ERR_PTR hwmon: Driver for Maxim MAX31790
-
Linus Torvalds authored
It turns out that at least some versions of glibc end up reading /proc/meminfo at every single startup, because glibc wants to know the amount of memory the machine has. And while that's arguably insane, it's just how things are. And it turns out that it's not all that expensive most of the time, but the vmalloc information statistics (amount of virtual memory used in the vmalloc space, and the biggest remaining chunk) can be rather expensive to compute. The 'get_vmalloc_info()' function actually showed up on my profiles as 4% of the CPU usage of "make test" in the git source repository, because the git tests are lots of very short-lived shell-scripts etc. It turns out that apparently this same silly vmalloc info gathering shows up on the facebook servers too, according to Dave Jones. So it's not just "make test" for git. We had two patches to just cache the information (one by me, one by Ingo) to mitigate this issue, but the whole vmalloc information of of rather dubious value to begin with, and people who *actually* want to know what the situation is wrt the vmalloc area should just look at the much more complete /proc/vmallocinfo instead. In fact, according to my testing - and perhaps more importantly, according to that big search engine in the sky: Google - there is nothing out there that actually cares about those two expensive fields: VmallocUsed and VmallocChunk. So let's try to just remove them entirely. Actually, this just removes the computation and reports the numbers as zero for now, just to try to be minimally intrusive. If this breaks anything, we'll obviously have to re-introduce the code to compute this all and add the caching patches on top. But if given the option, I'd really prefer to just remove this bad idea entirely rather than add even more code to work around our historical mistake that likely nobody really cares about. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
Merge file descriptor allocation speedup. Eric Dumazet has a test-case for a fairly common network deamon load pattern: openign and closing a lot of sockets that each have very little work done on them. It turns out that in that case, the cost of just finding the correct file descriptor number can be a dominating factor. We've long had a trivial optimization for allocating file descriptors sequentially, but that optimization ends up being not very effective when other file descriptors are being closed concurrently, and the fd patterns are not some simple FIFO pattern. In such cases we ended up spending a lot of time just scanning the bitmap of open file descriptors in order to find the next file descriptor number to open. This trivial patch-series mitigates that by simply introducing a second-level bitmap of which words in the first bitmap are already fully allocated. That cuts down the cost of scanning by an order of magnitude in some pathological (but realistic) cases. The second patch is an even more trivial patch to avoid unnecessarily dirtying the cacheline for the close-on-exec bit array that normally ends up being all empty. * fs-file-descriptor-optimization: vfs: conditionally clear close-on-exec flag vfs: Fix pathological performance case for __alloc_fd()
-
Linus Torvalds authored
-
- 01 Nov, 2015 2 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimmLinus Torvalds authored
Pull memremap fix from Dan Williams: "The new memremap() api introduced in the 4.3 cycle to unify/replace ioremap_cache() and ioremap_wt() is mishandling the highmem case. This patch has received a build success notification from a 0day-kbuild-robot run and has received an ack from Ard" From the commit message: "The impact of this bug is low for now since the pmem driver is the only user of memremap(), but this is important to fix before more conversions to memremap arrive in 4.4" * 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: memremap: fix highmem support
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Thomas Gleixner: "This set of updates contains: - Another bugfix for the pathologic vm86 machinery. Clear thread.vm86 on fork to prevent corrupting the parent state. This comes along with an update to the vm86 selftest case - Fix another corner case in the ioapic setup code which causes a boot crash on some oddball systems - Fix the fallout from the dma allocation consolidation work, which leads to a NULL pointer dereference when the allocation code is called with a NULL device" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/vm86: Set thread.vm86 to NULL on fork/clone selftests/x86: Add a fork() to entry_from_vm86 to catch fork bugs x86/ioapic: Prevent NULL pointer dereference in setup_ioapic_dest() x86/dma-mapping: Fix arch_dma_alloc_attrs() oops with NULL dev
-