__nvme_fc_init_request() invokes memset() on the nvme_fcp_op_w_sgl structure, which
NULLed-out the nvme_req(req)->ctrl field previously set by nvme_fc_init_request().
This apparently was not referenced until commit faf4a44fff ("nvme: support traffic
based keep-alive") which now results in a crash in nvme_complete_rq():

[ 8386.897130] RIP: 0010:panic+0x220/0x26c
[ 8386.901406] Code: 83 3d 6f ee 72 01 00 74 05 e8 e8 54 02 00 48 c7 c6 40 fd 5b b4 48 c7 c7 d8 8d c6 b3 31e
[ 8386.922359] RSP: 0018:ffff99650019fc40 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13
[ 8386.930804] RAX: 0000000000000046 RBX: 0000000000000000 RCX: 0000000000000006
[ 8386.938764] RDX: 0000000000000000 RSI: 0000000000000082 RDI: ffff8e325f8168b0
[ 8386.946725] RBP: ffff99650019fcb0 R08: 0000000000000000 R09: 00000000000004f8
[ 8386.954687] R10: 0000000000000000 R11: ffff99650019f9b8 R12: ffffffffb3c55f3c
[ 8386.962648] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000001
[ 8386.970613]  oops_end+0xd1/0xe0
[ 8386.974116]  no_context+0x1b2/0x3c0
[ 8386.978006]  do_page_fault+0x32/0x140
[ 8386.982090]  page_fault+0x1e/0x30
[ 8386.985786] RIP: 0010:nvme_complete_rq+0x65/0x1d0 [nvme_core]
[ 8386.992195] Code: 41 bc 03 00 00 00 74 16 0f 86 c3 00 00 00 66 3d 83 00 41 bc 06 00 00 00 0f 85 e7 00 000
[ 8387.013147] RSP: 0018:ffff99650019fe18 EFLAGS: 00010246
[ 8387.018973] RAX: 0000000000000000 RBX: ffff8e322ae51280 RCX: 0000000000000001
[ 8387.026935] RDX: 0000000000000400 RSI: 0000000000000001 RDI: ffff8e322ae51280
[ 8387.034897] RBP: ffff8e322ae51280 R08: 0000000000000000 R09: ffffffffb2f0b890
[ 8387.042859] R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000
[ 8387.050821] R13: 0000000000000100 R14: 0000000000000004 R15: ffff8e2b0446d990
[ 8387.058782]  ? swiotlb_unmap_page+0x40/0x40
[ 8387.063448]  nvme_fc_complete_rq+0x2d/0x70 [nvme_fc]
[ 8387.068986]  blk_done_softirq+0xa1/0xd0
[ 8387.073264]  __do_softirq+0xd6/0x2a9
[ 8387.077251]  run_ksoftirqd+0x26/0x40
[ 8387.081238]  smpboot_thread_fn+0x10e/0x160
[ 8387.085807]  kthread+0xf8/0x130
[ 8387.089309]  ? sort_range+0x20/0x20
[ 8387.093198]  ? kthread_stop+0x110/0x110
[ 8387.097475]  ret_from_fork+0x35/0x40
[ 8387.101462] ---[ end trace 7106b0adf5e422f8 ]---

Fixes: faf4a44fff ("nvme: support traffic based keep-alive")
Signed-off-by: Ewan D. Milne <emilne@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

Free the kobject name that was allocated for the controller device on
failure rather than its parent.

Fixes: d22524a4 ("nvme: switch controller refcounting to use struct device")
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

Pull NVMe fix from Christoph.

* 'nvme-4.20' of git://git.infradead.org/nvme:
  nvme-fc: resolve io failures during connect

If an io error occurs on an io issued while connecting, recovery
of the io falls flat as the state checking ends up nooping the error
handler.

Create an err_work work item that is scheduled upon an io error while
connecting. The work thread terminates all io on all queues and marks
the queues as not connected.  The termination of the io will return
back to the callee, which will then back out of the connection attempt
and will reschedule, if possible, the connection attempt.

The changes:
- in case there are several commands hitting the error handler, a
  state flag is kept so that the error work is only scheduled once,
  on the first error. The subsequent errors can be ignored.
- The calling sequence to stop keep alive and terminate the queues
  and their io is lifted from the reset routine. Made a small
  service routine used by both reset and err_work.
- During debugging, found that the teardown path can reference
  an uninitialized pointer, resulting in a NULL pointer oops.
  The aen_ops weren't initialized yet. Add validation on their
  initialization before calling the teardown routine.
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

c2856ae2 ("blk-mq: quiesce queue before freeing queue") has
already fixed this race, however the implied synchronize_rcu()
in blk_mq_quiesce_queue() can slow down LUN probe a lot, so caused
performance regression.

Then 1311326c ("blk-mq: avoid to synchronize rcu inside blk_cleanup_queue()")
tried to quiesce queue for avoiding unnecessary synchronize_rcu()
only when queue initialization is done, because it is usual to see
lots of inexistent LUNs which need to be probed.

However, turns out it isn't safe to quiesce queue only when queue
initialization is done. Because when one SCSI command is completed,
the user of sending command can be waken up immediately, then the
scsi device may be removed, meantime the run queue in scsi_end_request()
is still in-progress, so kernel panic can be caused.

In Red Hat QE lab, there are several reports about this kind of kernel
panic triggered during kernel booting.

This patch tries to address the issue by grabing one queue usage
counter during freeing one request and the following run queue.

Fixes: 1311326c ("blk-mq: avoid to synchronize rcu inside blk_cleanup_queue()")
Cc: Andrew Jones <drjones@redhat.com>
Cc: Bart Van Assche <bart.vanassche@wdc.com>
Cc: linux-scsi@vger.kernel.org
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
Cc: stable <stable@vger.kernel.org>
Cc: jianchao.wang <jianchao.w.wang@oracle.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

A discard cleanup merged into 4.20-rc2 causes fstests xfs/259 to
fall into an endless loop in the discard code. The test is creating
a device that is exactly 2^32 sectors in size to test mkfs boundary
conditions around the 32 bit sector overflow region.

mkfs issues a discard for the entire device size by default, and
hence this throws a sector count of 2^32 into
blkdev_issue_discard(). It takes the number of sectors to discard as
a sector_t - a 64 bit value.

The commit ba5d7385 ("block: cleanup __blkdev_issue_discard")
takes this sector count and casts it to a 32 bit value before
comapring it against the maximum allowed discard size the device
has. This truncates away the upper 32 bits, and so if the lower 32
bits of the sector count is zero, it starts issuing discards of
length 0. This causes the code to fall into an endless loop, issuing
a zero length discards over and over again on the same sector.

Fixes: ba5d7385 ("block: cleanup __blkdev_issue_discard")
Tested-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>

Killed pointless WARN_ON().
Signed-off-by: Jens Axboe <axboe@kernel.dk>

med_power_with_dipm still causes freezes after updating the firmware to
the latest version (DXT04L5Q).

Set model_rev to NULL and blacklist the device.

Cc: stable@vger.kernel.org
Signed-off-by: Diego Viola <diego.viola@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

We need to copy the io priority, too; otherwise the clone will run
with a different priority than the original one.

Fixes: 43b62ce3 ("block: move bio io prio to a new field")
Signed-off-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jean Delvare <jdelvare@suse.de>

Fixed up subject, and ordered stores.
Signed-off-by: Jens Axboe <axboe@kernel.dk>

When copying to the latency type, we should be passing LATENCY_TYPE_LEN,
not DOMAIN_LEN (this isn't a problem in practice because we only pass
"total" or "I/O"). Fix it by changing all of the strlcpy() calls to use
sizeof().

Fixes: 6c3b7af1 ("kyber: add tracepoints")
Reported-by: Jordan Glover <Golden_Miller83@protonmail.ch>
Tested-by: Jordan Glover <Golden_Miller83@protonmail.ch>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

LKP recently reported a hang at bootup in the floppy code:

[  245.678853] INFO: task mount:580 blocked for more than 120 seconds.
[  245.679906]       Tainted: G                T 4.19.0-rc6-00172-ga9f38e1d #1
[  245.680959] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  245.682181] mount           D 6372   580      1 0x00000004
[  245.683023] Call Trace:
[  245.683425]  __schedule+0x2df/0x570
[  245.683975]  schedule+0x2d/0x80
[  245.684476]  schedule_timeout+0x19d/0x330
[  245.685090]  ? wait_for_common+0xa5/0x170
[  245.685735]  wait_for_common+0xac/0x170
[  245.686339]  ? do_sched_yield+0x90/0x90
[  245.686935]  wait_for_completion+0x12/0x20
[  245.687571]  __floppy_read_block_0+0xfb/0x150
[  245.688244]  ? floppy_resume+0x40/0x40
[  245.688844]  floppy_revalidate+0x20f/0x240
[  245.689486]  check_disk_change+0x43/0x60
[  245.690087]  floppy_open+0x1ea/0x360
[  245.690653]  __blkdev_get+0xb4/0x4d0
[  245.691212]  ? blkdev_get+0x1db/0x370
[  245.691777]  blkdev_get+0x1f3/0x370
[  245.692351]  ? path_put+0x15/0x20
[  245.692871]  ? lookup_bdev+0x4b/0x90
[  245.693539]  blkdev_get_by_path+0x3d/0x80
[  245.694165]  mount_bdev+0x2a/0x190
[  245.694695]  squashfs_mount+0x10/0x20
[  245.695271]  ? squashfs_alloc_inode+0x30/0x30
[  245.695960]  mount_fs+0xf/0x90
[  245.696451]  vfs_kern_mount+0x43/0x130
[  245.697036]  do_mount+0x187/0xc40
[  245.697563]  ? memdup_user+0x28/0x50
[  245.698124]  ksys_mount+0x60/0xc0
[  245.698639]  sys_mount+0x19/0x20
[  245.699167]  do_int80_syscall_32+0x61/0x130
[  245.699813]  entry_INT80_32+0xc7/0xc7

showing that we never complete that read request. The reason is that
the completion setup is racy - it initializes the completion event
AFTER submitting the IO, which means that the IO could complete
before/during the init. If it does, we are passing garbage to
complete() and we may sleep forever waiting for the event to
occur.

Fixes: 7b7b68bb ("floppy: bail out in open() if drive is not responding to block0 read")
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Pull block layer fixes from Jens Axboe:

 - Two fixes for an ubd regression, one for missing locking, and one for
   a missing initialization of a field. The latter was an old latent
   bug, but it's now visible and triggers (Me, Anton Ivanov)

 - Set of NVMe fixes via Christoph, but applied manually due to a git
   tree mixup (Christoph, Sagi)

 - Fix for a discard split regression, in three patches (Ming)

 - Update libata git trees (Geert)

 - SPDX identifier for sata_rcar (Kuninori Morimoto)

 - Virtual boundary merge fix (Johannes)

 - Preemptively clear memory we are going to pass to userspace, in case
   the driver does a short read (Keith)

* tag 'for-linus-20181109' of git://git.kernel.dk/linux-block:
  block: make sure writesame bio is aligned with logical block size
  block: cleanup __blkdev_issue_discard()
  block: make sure discard bio is aligned with logical block size
  Revert "nvmet-rdma: use a private workqueue for delete"
  nvme: make sure ns head inherits underlying device limits
  nvmet: don't try to add ns to p2p map unless it actually uses it
  sata_rcar: convert to SPDX identifiers
  ubd: fix missing initialization of io_req
  block: Clear kernel memory before copying to user
  MAINTAINERS: Fix remaining pointers to obsolete libata.git
  ubd: fix missing lock around request issue
  block: respect virtual boundary mask in bvecs

Pull Ceph fixes from Ilya Dryomov:
 "Two CephFS fixes (copy_file_range and quota) and a small feature bit
  cleanup"

* tag 'ceph-for-4.20-rc2' of https://github.com/ceph/ceph-client:
  libceph: assume argonaut on the server side
  ceph: quota: fix null pointer dereference in quota check
  ceph: add destination file data sync before doing any remote copy

Pull MIPS fixes from Paul Burton:
 "A couple of small MIPS fixes for 4.20:

   - Extend an array to avoid overruns on some Octeon hardware, fixing a
     bug introduced in 4.3.

   - Fix a coherent DMA regression for systems without cache-coherent
     DMA introduced in the 4.20 merge window"

* tag 'mips_fixes_4.20_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  MIPS: Fix `dma_alloc_coherent' returning a non-coherent allocation
  MIPS: OCTEON: fix out of bounds array access on CN68XX

Obviously the created writesame bio has to be aligned with logical block
size, and use bio_allowed_max_sectors() to retrieve this number.

Cc: stable@vger.kernel.org
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Xiao Ni <xni@redhat.com>
Cc: Mariusz Dabrowski <mariusz.dabrowski@intel.com>
Fixes: b49a0871 ("block: remove split code in blkdev_issue_{discard,write_same}")
Tested-by: Rui Salvaterra <rsalvaterra@gmail.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Cleanup __blkdev_issue_discard() a bit:

- remove local variable of 'end_sect'
- remove code block of 'fail'

Cc: Mike Snitzer <snitzer@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Xiao Ni <xni@redhat.com>
Cc: Mariusz Dabrowski <mariusz.dabrowski@intel.com>
Tested-by: Rui Salvaterra <rsalvaterra@gmail.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Obviously the created discard bio has to be aligned with logical block size.

This patch introduces the helper of bio_allowed_max_sectors() for
this purpose.

Cc: stable@vger.kernel.org
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Xiao Ni <xni@redhat.com>
Cc: Mariusz Dabrowski <mariusz.dabrowski@intel.com>
Fixes: 744889b7 ("block: don't deal with discard limit in blkdev_issue_discard()")
Fixes: a22c4d7e ("block: re-add discard_granularity and alignment checks")
Reported-by: Rui Salvaterra <rsalvaterra@gmail.com>
Tested-by: Rui Salvaterra <rsalvaterra@gmail.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

This reverts commit 2acf70ad.

The commit never really fixed the intended issue and caused all
kinds of other issues, including a use before initialization.
Suggested-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Whenever we update ns_head info, we need to make sure it is still
compatible with all underlying backing devices because although nvme
multipath doesn't have any explicit use of these limits, other devices
can still be stacked on top of it which may rely on the underlying limits.
Start with unlimited stacking limits, and every info update iterate over
siblings and adjust queue limits.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Even without CONFIG_P2PDMA this results in a error print:
nvmet: no peer-to-peer memory is available that's supported by rxe0 and /dev/nullb0

Fixes: c6925093 ("nvmet: Optionally use PCI P2P memory")
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Pull s390 fixes from Martin Schwidefsky:

 - A fix for the pgtable_bytes misaccounting on s390. The patch changes
   common code part in regard to page table folding and adds extra
   checks to mm_[inc|dec]_nr_[pmds|puds].

 - Add FORCE for all build targets using if_changed

 - Use non-loadable phdr for the .vmlinux.info section to avoid a
   segment overlap that confuses kexec

 - Cleanup the attribute definition for the diagnostic sampling

 - Increase stack size for CONFIG_KASAN=y builds

 - Export __node_distance to fix a build error

 - Correct return code of a PMU event init function

 - An update for the default configs

* tag 's390-4.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/perf: Change CPUM_CF return code in event init function
  s390: update defconfigs
  s390/mm: Fix ERROR: "__node_distance" undefined!
  s390/kasan: increase instrumented stack size to 64k
  s390/cpum_sf: Rework attribute definition for diagnostic sampling
  s390/mm: fix mis-accounting of pgtable_bytes
  mm: add mm_pxd_folded checks to pgtable_bytes accounting functions
  mm: introduce mm_[p4d|pud|pmd]_folded
  mm: make the __PAGETABLE_PxD_FOLDED defines non-empty
  s390: avoid vmlinux segments overlap
  s390/vdso: add missing FORCE to build targets
  s390/decompressor: add missing FORCE to build targets

Pull xfs fixes from Darrick Wong:

 - fix incorrect dropping of error code from bmap

 - print buffer offsets instead of useless hashed pointers when dumping
   corrupt metadata

 - fix integer overflow in attribute verifier

* tag 'xfs-4.20-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: fix overflow in xfs_attr3_leaf_verify
  xfs: print buffer offsets when dumping corrupt buffers
  xfs: Fix error code in 'xfs_ioc_getbmap()'

Merge tag 'led-fixes-for-4.20-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds

Pull LED fixes from Jacek Anaszewski:
 "All three fixes are related to the newly added pattern trigger:

   - remove mutex_lock() from timer callback, which would trigger
     problems related to sleeping in atomic context, the removal is
     harmless since mutex protection turned out to be redundant in this
     case

   - fix pattern parsing to properly handle intervals with brightness == 0

   - fix typos in the ABI documentation"

* tag 'led-fixes-for-4.20-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds:
  Documentation: ABI: led-trigger-pattern: Fix typos
  leds: trigger: Fix sleeping function called from invalid context
  Fix pattern handling optimalization

Pull sound fixes from Takashi Iwai:
 "Two small regression fixes for HD-audio: one about vga_switcheroo and
  runtime PM, and another about Oops on some Thinkpads"

* tag 'sound-4.20-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda - Fix incorrect clearance of thinkpad_acpi hooks
  vga_switcheroo: Fix missing gpu_bound call at audio client registration

No one is running pre-argonaut.  In addition one of the argonaut
features (NOSRCADDR) has been required since day one (and a half,
2.6.34 vs 2.6.35) of the kernel client.

Allow for the possibility of reusing these feature bits later.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Sage Weil <sage@redhat.com>

This patch fixes a possible null pointer dereference in
check_quota_exceeded, detected by the static checker smatch, with the
following warning:

   fs/ceph/quota.c:240 check_quota_exceeded()
    error: we previously assumed 'realm' could be null (see line 188)

Fixes: b7a29217 ("ceph: quota: support for ceph.quota.max_files")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Luis Henriques <lhenriques@suse.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>

If we try to copy into a file that was just written, any data that is
remote copied will be overwritten by our buffered writes once they are
flushed.  When this happens, the call to invalidate_inode_pages2_range
will also return a -EBUSY error.

This patch fixes this by also sync'ing the destination file before
starting any copy.

Fixes: 503f82a9 ("ceph: support copy_file_range file operation")
Signed-off-by: Luis Henriques <lhenriques@suse.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>

This patch updates license to use SPDX-License-Identifier
instead of verbose license text.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

The SYNC path doesn't initialize io_req->error, which can cause
random errors. Before the conversion to blk-mq, we always
completed requests with BLK_STS_OK status, but now we actually
look at the error field and this issue becomes apparent.
Signed-off-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>

[axboe: fixed up commit message to explain what is actually going on]
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Pull compiler attribute fixlets from Miguel Ojeda:
 "Small improvements to Compiler Attributes:

   - Define asm_volatile_goto for non-gcc compilers (Nick Desaulniers)

   - Improve the explanation of compiler_attributes.h"

* tag 'compiler-attributes-for-linus-v4.20-rc2' of https://github.com/ojeda/linux:
  Compiler Attributes: improve explanation of header
  include/linux/compiler*.h: define asm_volatile_goto

Pull MTD fixes from Boris Brezillon:
 "MTD changes:
   - Kill a VLA in sa1100

  SPI NOR changes:
   - Make sure ->addr_width is restored when SFDP parsing fails
   - Propate errors happening in cqspi_direct_read_execute()

  NAND changes:
   - Fix kernel-doc mismatch
   - Fix nanddev_neraseblocks() to return the correct value
   - Avoid selection of BCH_CONST_PARAMS when some users require dynamic
     BCH settings"

* tag 'mtd/fixes-for-4.20-rc2' of git://git.infradead.org/linux-mtd:
  mtd: nand: Fix nanddev_pos_next_page() kernel-doc header
  mtd: sa1100: avoid VLA in sa1100_setup_mtd
  mtd: spi-nor: Reset nor->addr_width when SFDP parsing failed
  mtd: spi-nor: cadence-quadspi: Return error code in cqspi_direct_read_execute()
  mtd: nand: Fix nanddev_neraseblocks()
  mtd: nand: drop kernel-doc notation for a deleted function parameter
  mtd: docg3: don't set conflicting BCH_CONST_PARAMS option

Explain better what "optional" attributes are, and avoid calling
them so to avoid confusion. Simply retain "Optional" as a word
to look for in the comments.

Moreover, add a couple sentences to explain a bit more the intention
and the documentation links.
Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>

The function perf_init_event() creates a new event and
assignes it to a PMU. This a done in a loop over all existing
PMUs. For each listed PMU the event init function is called
and if this function does return any other error than -ENOENT,
the loop is terminated the creation of the event fails.

If the event is invalid, return -ENOENT to try other PMUs.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

If the kernel allocates a bounce buffer for user read data, this memory
needs to be cleared before copying it to the user, otherwise it may leak
kernel memory to user space.

Laurence Oberman <loberman@redhat.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

libata.git no longer exists.  Replace the remaining pointers to it by
pointers to the block tree, which is where all libata development
happens now.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

We need to hold the device lock (and disable interrupts) while
writing new commands, or we could be interrupted while that
is happening and read invalid requests in the completion path.

Fixes: 4e6da0fe ("um: Convert ubd driver to blk-mq")
Tested-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

  - Spelling s/brigntess/brightness/,
  - Double "use".
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>

We will meet below issue due to mutex_lock() is called in interrupt context.
The mutex lock is used to protect the pattern trigger data, but before changing
new pattern trigger data (pattern values or repeat value) by users, we always
cancel the timer firstly to clear previous patterns' performance. That means
there is no race in pattern_trig_timer_function(), so we can drop the mutex
lock in pattern_trig_timer_function() to avoid this issue.

Moreover we can move the timer cancelling into mutex protection, since there
is no deadlock risk if we remove the mutex lock in pattern_trig_timer_function().

BUG: sleeping function called from invalid context at kernel/locking/mutex.c:254
in_atomic(): 1, irqs_disabled(): 0, pid: 0, name: swapper/1
CPU: 1 PID: 0 Comm: swapper/1 Not tainted
4.20.0-rc1-koelsch-00841-ga338c8181013c1a9 #171
Hardware name: Generic R-Car Gen2 (Flattened Device Tree)
[<c020f19c>] (unwind_backtrace) from [<c020aecc>] (show_stack+0x10/0x14)
[<c020aecc>] (show_stack) from [<c07affb8>] (dump_stack+0x7c/0x9c)
[<c07affb8>] (dump_stack) from [<c02417d4>] (___might_sleep+0xf4/0x158)
[<c02417d4>] (___might_sleep) from [<c07c92c4>] (mutex_lock+0x18/0x60)
[<c07c92c4>] (mutex_lock) from [<c067b28c>] (pattern_trig_timer_function+0x1c/0x11c)
[<c067b28c>] (pattern_trig_timer_function) from [<c027f6fc>] (call_timer_fn+0x1c/0x90)
[<c027f6fc>] (call_timer_fn) from [<c027f944>] (expire_timers+0x94/0xa4)
[<c027f944>] (expire_timers) from [<c027fc98>] (run_timer_softirq+0x108/0x15c)
[<c027fc98>] (run_timer_softirq) from [<c02021cc>] (__do_softirq+0x1d4/0x258)
[<c02021cc>] (__do_softirq) from [<c0224d24>] (irq_exit+0x64/0xc4)
[<c0224d24>] (irq_exit) from [<c0268dd0>] (__handle_domain_irq+0x80/0xb4)
[<c0268dd0>] (__handle_domain_irq) from [<c045e1b0>] (gic_handle_irq+0x58/0x90)
[<c045e1b0>] (gic_handle_irq) from [<c02019f8>] (__irq_svc+0x58/0x74)
Exception stack(0xeb483f60 to 0xeb483fa8)
3f60: 00000000 00000000 eb9afaa0 c0217e80 00000000 ffffe000 00000000 c0e06408
3f80: 00000002 c0e0647c c0c6a5f0 00000000 c0e04900 eb483fb0 c0207ea8 c0207e98
3fa0: 60020013 ffffffff
[<c02019f8>] (__irq_svc) from [<c0207e98>] (arch_cpu_idle+0x1c/0x38)
[<c0207e98>] (arch_cpu_idle) from [<c0247ca8>] (do_idle+0x138/0x268)
[<c0247ca8>] (do_idle) from [<c0248050>] (cpu_startup_entry+0x18/0x1c)
[<c0248050>] (cpu_startup_entry) from [<402022ec>] (0x402022ec)

Fixes: 5fd752b6 ("leds: core: Introduce LED pattern trigger")
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>

With drivers that are settting a virtual boundary constrain, we are
seeing a lot of bio splitting and smaller I/Os being submitted to the
driver.

This happens because the bio gap detection code does not account cases
where PAGE_SIZE - 1 is bigger than queue_virt_boundary() and thus will
split the bio unnecessarily.

Cc: Jan Kara <jack@suse.cz>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Acked-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Merge tag 'hwmon-for-v4.20-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon fixes from Guenter Roeck:

 - Remove bogus __init annotations in ibmpowernv driver

 - Fix double-free in error handling of __hwmon_device_register()

* tag 'hwmon-for-v4.20-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (ibmpowernv) Remove bogus __init annotations
  hwmon: (core) Fix double-free in __hwmon_device_register()

Pull ARM SoC fixes from Olof Johansson:
 "A few more fixes that have come in, and one revert of a previous fix.

  I was a bit too trigger happy to enable PREEMPT on multi_v7_defconfig,
  and it ended up regressing at least BeagleBone XM boards. While we get
  that debugged for next merge window, let's disable it again.

  Beyond that:

   - Stratix change to fix multicast filtering

   - Minor DT fixes for Renesas and i.MX

   - Ethernet fix for a Renesas board (switching main interfaces)

   - Ethernet phy regulator fix for i.MX6SX"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  arm64: dts: stratix10: fix multicast filtering
  ARM: defconfig: Disable PREEMPT again on  multi_v7
  arm64: dts: renesas: condor: switch from EtherAVB to GEther
  dt-bindings: arm: Fix RZ/G2E part number
  arm64: dts: renesas: r8a7795: add missing dma-names on hscif2
  ARM: dts: imx6sx-sdb: Fix enet phy regulator
  ARM: dts: fsl: Fix improperly quoted stdout-path values
  ARM: dts: imx6sll: fix typo for fsl,imx6sll-i2c node