- 03 Mar, 2015 3 commits
-
-
Borislav Petkov authored
perf bench mem mem{set,cpy} -r all thus runs all available mem benchmarking routines. Reviewed-by:Hitoshi Mitake <mitake.hitoshi@lab.ntt.co.jp> Signed-off-by:
Borislav Petkov <bp@suse.de>
-
Borislav Petkov authored
... so that we can call it multiple times. See next patch. Reviewed-by:
-
Borislav Petkov authored
Adjust perf bench to the new changes in the alternatives code for memcpy/memset. Reviewed-by:
-
- 23 Feb, 2015 18 commits
-
-
Borislav Petkov authored
Make REP_GOOD variant the default after alternatives have run. Signed-off-by: -
Borislav Petkov authored
Make it execute the ERMS version if support is present and we're in the forward memmove() part and remove the unfolded alternatives section definition. Signed-off-by: -
Borislav Petkov authored
Make alternatives replace single JMPs instead of whole memset functions, thus decreasing the amount of instructions copied during patching time at boot. While at it, make it use the REP_GOOD version by default which means alternatives NOP out the JMP to the other versions, as REP_GOOD is set by default on the majority of relevant x86 processors. Signed-off-by: -
Borislav Petkov authored
This is based on a patch originally by hpa. With the current improvements to the alternatives, we can simply use %P1 as a mem8 operand constraint and rely on the toolchain to generate the proper instruction sizes. For example, on 32-bit, where we use an empty old instruction we get: apply_alternatives: feat: 6*32+8, old: (c104648b, len: 4), repl: (c195566c, len: 4) c104648b: alt_insn: 90 90 90 90 c195566c: rpl_insn: 0f 0d 4b 5c ... apply_alternatives: feat: 6*32+8, old: (c18e09b4, len: 3), repl: (c1955948, len: 3) c18e09b4: alt_insn: 90 90 90 c1955948: rpl_insn: 0f 0d 08 ... apply_alternatives: feat: 6*32+8, old: (c1190cf9, len: 7), repl: (c1955a79, len: 7) c1190cf9: alt_insn: 90 90 90 90 90 90 90 c1955a79: rpl_insn: 0f 0d 0d a0 d4 85 c1 all with the proper padding done depending on the size of the replacement instruction the compiler generates. Signed-off-by: -
Borislav Petkov authored
... now that we have it. Acked-by:
Andy Lutomirski <luto@amacapital.net> Cc: Richard Weinberger <richard@nod.at> Signed-off-by:
-
Borislav Petkov authored
Move clear_page() up so that we can get 2-byte forward JMPs when patching: apply_alternatives: feat: 3*32+16, old: (ffffffff8130adb0, len: 5), repl: (ffffffff81d0b859, len: 5) ffffffff8130adb0: alt_insn: 90 90 90 90 90 recompute_jump: new_displ: 0x0000003e ffffffff81d0b859: rpl_insn: eb 3e 66 66 90 even though the compiler generated 5-byte JMPs which we padded with 5 NOPs. Also, make the REP_GOOD version be the default as the majority of machines set REP_GOOD. This way we get to save ourselves the JMP: old insn VA: 0xffffffff813038b0, CPU feat: X86_FEATURE_REP_GOOD, size: 5, padlen: 0 clear_page: ffffffff813038b0 <clear_page>: ffffffff813038b0: e9 0b 00 00 00 jmpq ffffffff813038c0 repl insn: 0xffffffff81cf0e92, size: 0 old insn VA: 0xffffffff813038b0, CPU feat: X86_FEATURE_ERMS, size: 5, padlen: 0 clear_page: ffffffff813038b0 <clear_page>: ffffffff813038b0: e9 0b 00 00 00 jmpq ffffffff813038c0 repl insn: 0xffffffff81cf0e92, size: 5 ffffffff81cf0e92: e9 69 2a 61 ff jmpq ffffffff81303900 ffffffff813038b0 <clear_page>: ffffffff813038b0: e9 69 2a 61 ff jmpq ffffffff8091631e Signed-off-by: -
Borislav Petkov authored
Booting a 486 kernel on an AMD guest with this patch applied, says: apply_alternatives: feat: 0*32+25, old: (c160a475, len: 5), repl: (c19557d4, len: 5) c160a475: alt_insn: 68 10 35 00 c1 c19557d4: rpl_insn: 68 80 39 00 c1 which is: old insn VA: 0xc160a475, CPU feat: X86_FEATURE_XMM, size: 5 simd_coprocessor_error: c160a475: 68 10 35 00 c1 push $0xc1003510 <do_general_protection> repl insn: 0xc19557d4, size: 5 c160a475: 68 80 39 00 c1 push $0xc1003980 <do_simd_coprocessor_error> Signed-off-by: -
Borislav Petkov authored
... and drop unfolded version. No need for ASM_NOP3 anymore either as the alternatives do the proper padding at build time and insert proper NOPs at boot time. There should be no apparent operational change from this patch. Signed-off-by: -
Borislav Petkov authored
Use the asm macro and drop the locally grown version. Signed-off-by: -
Borislav Petkov authored
... instead of the semi-version with the spelled out sections. What is more, make the REP_GOOD version be the default copy_page() version as the majority of the relevant x86 CPUs do set X86_FEATURE_REP_GOOD. Thus, copy_page gets compiled to: ffffffff8130af80 <copy_page>: ffffffff8130af80: e9 0b 00 00 00 jmpq ffffffff8130af90 <copy_page_regs> ffffffff8130af85: b9 00 02 00 00 mov $0x200,%ecx ffffffff8130af8a: f3 48 a5 rep movsq %ds:(%rsi),%es:(%rdi) ffffffff8130af8d: c3 retq ffffffff8130af8e: 66 90 xchg %ax,%ax ffffffff8130af90 <copy_page_regs>: ... and after the alternatives have run, the JMP to the old, unrolled version gets NOPed out: ffffffff8130af80 <copy_page>: ffffffff8130af80: 66 66 90 xchg %ax,%ax ffffffff8130af83: 66 90 xchg %ax,%ax ffffffff8130af85: b9 00 02 00 00 mov $0x200,%ecx ffffffff8130af8a: f3 48 a5 rep movsq %ds:(%rsi),%es:(%rdi) ffffffff8130af8d: c3 retq On modern uarches, those NOPs are cheaper than the unconditional JMP previously. Signed-off-by: -
Borislav Petkov authored
Alternatives allow now for an empty old instruction. In this case we go and pad the space with NOPs at assembly time. However, there are the optimal, longer NOPs which should be used. Do that at patching time by adding alt_instr.padlen-sized NOPs at the old instruction address. Cc: Andy Lutomirski <luto@amacapital.net> Signed-off-by: -
Borislav Petkov authored
Up until now we had to pay attention to relative JMPs in alternatives about how their relative offset gets computed so that the jump target is still correct. Or, as it is the case for near CALLs (opcode e8), we still have to go and readjust the offset at patching time. What is more, the static_cpu_has_safe() facility had to forcefully generate 5-byte JMPs since we couldn't rely on the compiler to generate properly sized ones so we had to force the longest ones. Worse than that, sometimes it would generate a replacement JMP which is longer than the original one, thus overwriting the beginning of the next instruction at patching time. So, in order to alleviate all that and make using JMPs more straight-forward we go and pad the original instruction in an alternative block with NOPs at build time, should the replacement(s) be longer. This way, alternatives users shouldn't pay special attention so that original and replacement instruction sizes are fine but the assembler would simply add padding where needed and not do anything otherwise. As a second aspect, we go and recompute JMPs at patching time so that we can try to make 5-byte JMPs into two-byte ones if possible. If not, we still have to recompute the offsets as the replacement JMP gets put far away in the .altinstr_replacement section leading to a wrong offset if copied verbatim. For example, on a locally generated kernel image old insn VA: 0xffffffff810014bd, CPU feat: X86_FEATURE_ALWAYS, size: 2 __switch_to: ffffffff810014bd: eb 21 jmp ffffffff810014e0 repl insn: size: 5 ffffffff81d0b23c: e9 b1 62 2f ff jmpq ffffffff810014f2 gets corrected to a 2-byte JMP: apply_alternatives: feat: 3*32+21, old: (ffffffff810014bd, len: 2), repl: (ffffffff81d0b23c, len: 5) alt_insn: e9 b1 62 2f ff recompute_jumps: next_rip: ffffffff81d0b241, tgt_rip: ffffffff810014f2, new_displ: 0x00000033, ret len: 2 converted to: eb 33 90 90 90 and a 5-byte JMP: old insn VA: 0xffffffff81001516, CPU feat: X86_FEATURE_ALWAYS, size: 2 __switch_to: ffffffff81001516: eb 30 jmp ffffffff81001548 repl insn: size: 5 ffffffff81d0b241: e9 10 63 2f ff jmpq ffffffff81001556 gets shortened into a two-byte one: apply_alternatives: feat: 3*32+21, old: (ffffffff81001516, len: 2), repl: (ffffffff81d0b241, len: 5) alt_insn: e9 10 63 2f ff recompute_jumps: next_rip: ffffffff81d0b246, tgt_rip: ffffffff81001556, new_displ: 0x0000003e, ret len: 2 converted to: eb 3e 90 90 90 ... and so on. This leads to a net win of around 40ish replacements * 3 bytes savings =~ 120 bytes of I$ on an AMD guest which means some savings of precious instruction cache bandwidth. The padding to the shorter 2-byte JMPs are single-byte NOPs which on smart microarchitectures means discarding NOPs at decode time and thus freeing up execution bandwidth. Signed-off-by: -
Borislav Petkov authored
Up until now we have always paid attention to make sure the length of the new instruction replacing the old one is at least less or equal to the length of the old instruction. If the new instruction is longer, at the time it replaces the old instruction it will overwrite the beginning of the next instruction in the kernel image and cause your pants to catch fire. So instead of having to pay attention, teach the alternatives framework to pad shorter old instructions with NOPs at buildtime - but only in the case when len(old instruction(s)) < len(new instruction(s)) and add nothing in the >= case. (In that case we do add_nops() when patching). This way the alternatives user shouldn't have to care about instruction sizes and simply use the macros. Add asm ALTERNATIVE* flavor macros too, while at it. Also, we need to save the pad length in a separate struct alt_instr member for NOP optimization and the way to do that reliably is to carry the pad length instead of trying to detect whether we're looking at single-byte NOPs or at pathological instruction offsets like e9 90 90 90 90, for example, which is a valid instruction. Thanks to Michael Matz for the great help with toolchain questions. Signed-off-by: -
Borislav Petkov authored
Make it pass __func__ implicitly. Also, dump info about each replacing we're doing. Fixup comments and style while at it. Signed-off-by: -
Borislav Petkov authored
It is unconditionally enabled so remove it. No object file change. Signed-off-by: -
Linus Torvalds authored
.. after extensive statistical analysis of my G+ polling, I've come to the inescapable conclusion that internet polls are bad. Big surprise. But "Hurr durr I'ma sheep" trounced "I like online polls" by a 62-to-38% margin, in a poll that people weren't even supposed to participate in. Who can argue with solid numbers like that? 5,796 votes from people who can't even follow the most basic directions? In contrast, "v4.0" beat out "v3.20" by a slimmer margin of 56-to-44%, but with a total of 29,110 votes right now. Now, arguably, that vote spread is only about 3,200 votes, which is less than the almost six thousand votes that the "please ignore" poll got, so it could be considered noise. But hey, I asked, so I'll honor the votes.
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
Pull ext4 fixes from Ted Ts'o: "Ext4 bug fixes. We also reserved code points for encryption and read-only images (for which the implementation is mostly just the reserved code point for a read-only feature :-)" * tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: fix indirect punch hole corruption ext4: ignore journal checksum on remount; don't fail ext4: remove duplicate remount check for JOURNAL_CHECKSUM change ext4: fix mmap data corruption in nodelalloc mode when blocksize < pagesize ext4: support read-only images ext4: change to use setup_timer() instead of init_timer() ext4: reserve codepoints used by the ext4 encryption feature jbd2: complain about descriptor block checksum errors
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull more vfs updates from Al Viro: "Assorted stuff from this cycle. The big ones here are multilayer overlayfs from Miklos and beginning of sorting ->d_inode accesses out from David" * 'for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (51 commits) autofs4 copy_dev_ioctl(): keep the value of ->size we'd used for allocation procfs: fix race between symlink removals and traversals debugfs: leave freeing a symlink body until inode eviction Documentation/filesystems/Locking: ->get_sb() is long gone trylock_super(): replacement for grab_super_passive() fanotify: Fix up scripted S_ISDIR/S_ISREG/S_ISLNK conversions Cachefiles: Fix up scripted S_ISDIR/S_ISREG/S_ISLNK conversions VFS: (Scripted) Convert S_ISLNK/DIR/REG(dentry->d_inode) to d_is_*(dentry) SELinux: Use d_is_positive() rather than testing dentry->d_inode Smack: Use d_is_positive() rather than testing dentry->d_inode TOMOYO: Use d_is_dir() rather than d_inode and S_ISDIR() Apparmor: Use d_is_positive/negative() rather than testing dentry->d_inode Apparmor: mediated_filesystem() should use dentry->d_sb not inode->i_sb VFS: Split DCACHE_FILE_TYPE into regular and special types VFS: Add a fallthrough flag for marking virtual dentries VFS: Add a whiteout dentry type VFS: Introduce inode-getting helpers for layered/unioned fs environments Infiniband: Fix potential NULL d_inode dereference posix_acl: fix reference leaks in posix_acl_create autofs4: Wrong format for printing dentry ...
-
- 22 Feb, 2015 19 commits
-
-
git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds authored
Pull ARM fix from Russell King: "Just one fix this time around. __iommu_alloc_buffer() can cause a BUG() if dma_alloc_coherent() is called with either __GFP_DMA32 or __GFP_HIGHMEM set. The patch from Alexandre addresses this" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: 8305/1: DMA: Fix kzalloc flags in __iommu_alloc_buffer()
-
Al Viro authored
X-Coverup: just ask spender Cc: stable@vger.kernel.org Signed-off-by:Al Viro <viro@zeniv.linux.org.uk>
-
Al Viro authored
use_pde()/unuse_pde() in ->follow_link()/->put_link() resp. Cc: stable@vger.kernel.org Signed-off-by: -
Al Viro authored
As it is, we have debugfs_remove() racing with symlink traversals. Supply ->evict_inode() and do freeing there - inode will remain pinned until we are done with the symlink body. And rip the idiocy with checking if dentry is positive right after we'd verified debugfs_positive(), which is a stronger check... Cc: stable@vger.kernel.org Signed-off-by: -
Al Viro authored
Signed-off-by: -
Konstantin Khlebnikov authored
I've noticed significant locking contention in memory reclaimer around sb_lock inside grab_super_passive(). Grab_super_passive() is called from two places: in icache/dcache shrinkers (function super_cache_scan) and from writeback (function __writeback_inodes_wb). Both are required for progress in memory allocator. Grab_super_passive() acquires sb_lock to increment sb->s_count and check sb->s_instances. It seems sb->s_umount locked for read is enough here: super-block deactivation always runs under sb->s_umount locked for write. Protecting super-block itself isn't a problem: in super_cache_scan() sb is protected by shrinker_rwsem: it cannot be freed if its slab shrinkers are still active. Inside writeback super-block comes from inode from bdi writeback list under wb->list_lock. This patch removes locking sb_lock and checks s_instances under s_umount: generic_shutdown_super() unlinks it under sb->s_umount locked for write. New variant is called trylock_super() and since it only locks semaphore, callers must call up_read(&sb->s_umount) instead of drop_super(sb) when they're done. Signed-off-by:
Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by:
-
David Howells authored
Fanotify probably doesn't want to watch autodirs so make it use d_can_lookup() rather than d_is_dir() when checking a dir watch and give an error on fake directories. Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
David Howells authored
Fix up the following scripted S_ISDIR/S_ISREG/S_ISLNK conversions (or lack thereof) in cachefiles: (1) Cachefiles mostly wants to use d_can_lookup() rather than d_is_dir() as it doesn't want to deal with automounts in its cache. (2) Coccinelle didn't find S_IS* expressions in ASSERT() statements in cachefiles. Signed-off-by: -
David Howells authored
Convert the following where appropriate: (1) S_ISLNK(dentry->d_inode) to d_is_symlink(dentry). (2) S_ISREG(dentry->d_inode) to d_is_reg(dentry). (3) S_ISDIR(dentry->d_inode) to d_is_dir(dentry). This is actually more complicated than it appears as some calls should be converted to d_can_lookup() instead. The difference is whether the directory in question is a real dir with a ->lookup op or whether it's a fake dir with a ->d_automount op. In some circumstances, we can subsume checks for dentry->d_inode not being NULL into this, provided we the code isn't in a filesystem that expects d_inode to be NULL if the dirent really *is* negative (ie. if we're going to use d_inode() rather than d_backing_inode() to get the inode pointer). Note that the dentry type field may be set to something other than DCACHE_MISS_TYPE when d_inode is NULL in the case of unionmount, where the VFS manages the fall-through from a negative dentry to a lower layer. In such a case, the dentry type of the negative union dentry is set to the same as the type of the lower dentry. However, if you know d_inode is not NULL at the call site, then you can use the d_is_xxx() functions even in a filesystem. There is one further complication: a 0,0 chardev dentry may be labelled DCACHE_WHITEOUT_TYPE rather than DCACHE_SPECIAL_TYPE. Strictly, this was intended for special directory entry types that don't have attached inodes. The following perl+coccinelle script was used: use strict; my @callers; open($fd, 'git grep -l \'S_IS[A-Z].*->d_inode\' |') || die "Can't grep for S_ISDIR and co. callers"; @callers = <$fd>; close($fd); unless (@callers) { print "No matches\n"; exit(0); } my @cocci = ( '@@', 'expression E;', '@@', '', '- S_ISLNK(E->d_inode->i_mode)', '+ d_is_symlink(E)', '', '@@', 'expression E;', '@@', '', '- S_ISDIR(E->d_inode->i_mode)', '+ d_is_dir(E)', '', '@@', 'expression E;', '@@', '', '- S_ISREG(E->d_inode->i_mode)', '+ d_is_reg(E)' ); my $coccifile = "tmp.sp.cocci"; open($fd, ">$coccifile") || die $coccifile; print($fd "$_\n") || die $coccifile foreach (@cocci); close($fd); foreach my $file (@callers) { chomp $file; print "Processing ", $file, "\n"; system("spatch", "--sp-file", $coccifile, $file, "--in-place", "--no-show-diff") == 0 || die "spatch failed"; } [AV: overlayfs parts skipped] Signed-off-by: -
David Howells authored
Use d_is_positive() rather than testing dentry->d_inode in SELinux to get rid of direct references to d_inode outside of the VFS. Signed-off-by:
-
David Howells authored
Use d_is_positive() rather than testing dentry->d_inode in Smack to get rid of direct references to d_inode outside of the VFS. Signed-off-by:
-
David Howells authored
Use d_is_dir() rather than d_inode and S_ISDIR(). Note that this will include fake directories such as automount triggers. Signed-off-by:
-
David Howells authored
Use d_is_positive(dentry) or d_is_negative(dentry) rather than testing dentry->d_inode as the dentry may cover another layer that has an inode when the top layer doesn't or may hold a 0,0 chardev that's actually a whiteout. Signed-off-by:
-
David Howells authored
mediated_filesystem() should use dentry->d_sb not dentry->d_inode->i_sb and should avoid file_inode() also since it is really dealing with the path. Signed-off-by:
-
David Howells authored
Split DCACHE_FILE_TYPE into DCACHE_REGULAR_TYPE (dentries representing regular files) and DCACHE_SPECIAL_TYPE (representing blockdev, chardev, FIFO and socket files). d_is_reg() and d_is_special() are added to detect these subtypes and d_is_file() is left as the union of the two. This allows a number of places that use S_ISREG(dentry->d_inode->i_mode) to use d_is_reg(dentry) instead. Signed-off-by:
-
David Howells authored
Add a DCACHE_FALLTHRU flag to indicate that, in a layered filesystem, this is a virtual dentry that covers another one in a lower layer that should be used instead. This may be recorded on medium if directory integration is stored there. The flag can be set with d_set_fallthru() and tested with d_is_fallthru(). Original-author: Valerie Aurora <vaurora@redhat.com> Signed-off-by:
-
David Howells authored
Add DCACHE_WHITEOUT_TYPE and provide a d_is_whiteout() accessor function. A d_is_miss() accessor is also added for ordinary cache misses and d_is_negative() is modified to indicate either an ordinary miss or an enforced miss (whiteout). Signed-off-by:
-
David Howells authored
Introduce some function for getting the inode (and also the dentry) in an environment where layered/unioned filesystems are in operation. The problem is that we have places where we need *both* the union dentry and the lower source or workspace inode or dentry available, but we can only have a handle on one of them. Therefore we need to derive the handle to the other from that. The idea is to introduce an extra field in struct dentry that allows the union dentry to refer to and pin the lower dentry. Signed-off-by:
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds authored
Pull MIPS updates from Ralf Baechle: "This is the main pull request for MIPS: - a number of fixes that didn't make the 3.19 release. - a number of cleanups. - preliminary support for Cavium's Octeon 3 SOCs which feature up to 48 MIPS64 R3 cores with FPU and hardware virtualization. - support for MIPS R6 processors. Revision 6 of the MIPS architecture is a major revision of the MIPS architecture which does away with many of original sins of the architecture such as branch delay slots. This and other changes in R6 require major changes throughout the entire MIPS core architecture code and make up for the lion share of this pull request. - finally some preparatory work for eXtendend Physical Address support, which allows support of up to 40 bit of physical address space on 32 bit processors" [ Ahh, MIPS can't leave the PAE brain damage alone. It's like every CPU architect has to make that mistake, but pee in the snow by changing the TLA. But whether it's called PAE, LPAE or XPA, it's horrid crud - Linus ] * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (114 commits) MIPS: sead3: Corrected get_c0_perfcount_int MIPS: mm: Remove dead macro definitions MIPS: OCTEON: irq: add CIB and other fixes MIPS: OCTEON: Don't do acknowledge operations for level triggered irqs. MIPS: OCTEON: More OCTEONIII support MIPS: OCTEON: Remove setting of processor specific CVMCTL icache bits. MIPS: OCTEON: Core-15169 Workaround and general CVMSEG cleanup. MIPS: OCTEON: Update octeon-model.h code for new SoCs. MIPS: OCTEON: Implement DCache errata workaround for all CN6XXX MIPS: OCTEON: Add little-endian support to asm/octeon/octeon.h MIPS: OCTEON: Implement the core-16057 workaround MIPS: OCTEON: Delete unused COP2 saving code MIPS: OCTEON: Use correct instruction to read 64-bit COP0 register MIPS: OCTEON: Save and restore CP2 SHA3 state MIPS: OCTEON: Fix FP context save. MIPS: OCTEON: Save/Restore wider multiply registers in OCTEON III CPUs MIPS: boot: Provide more uImage options MIPS: Remove unneeded #ifdef __KERNEL__ from asm/processor.h MIPS: ip22-gio: Remove legacy suspend/resume support mips: pci: Add ifdef around pci_proc_domain ...
-
