- 09 Aug, 2010 40 commits
-
-
Andy Shevchenko authored
Signed-off-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by:
Mike Isely <isely@pobox.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Andy Shevchenko authored
Signed-off-by:
-
Arnuschky authored
Here a small patch to get a TwinHan VT DST DVB-T card working with kernels >= 2.6.32. Analogously to http://linuxtv.org/hg/v4l-dvb/rev/0e735b509163 I had to: "Fill in the .caps field in struct dst_dvbt_ops (around line 1763) with all the supported QAM modulation methods to match the capabilities of the card as implemented in function dst_set_modulation (around line 502). Note that beginning with linux kernel version 2.6.32 the modulation method is checked (by function dvb_frontend_check_parameters in file drivers/media/dvb/dvb-core/dvb_frontend.c) and thus tuning fails if you use a modulation method that is not present in the .caps field." Signed-off-by:
-
Dan Carpenter authored
"ir_dev->props" can be NULL. We only use raw mode if "ir_dev->props" is non-NULL and "ir_dev->props->driver_type == RC_DRIVER_IR_RAW". Signed-off-by:
Dan Carpenter <error27@gmail.com> Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Since this module is also used by drivers that are not yet converted, the old and new code have to co-exist. The source is split into three parts: a common part at the top, which is used by both old and new code, then the old code followed by the new control framework implementation. This new code is much more readable (and shorter!) than the original code. Once all bridge drivers that use this are converted the old code can be deleted. Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
The cx25840 used a private control CX25840_CID_ENABLE_PVR150_WORKAROUND to be told whether to enable a workaround for certain pvr150 cards. This is really config data that it needs to get at load time. Implemented this in cx25840 and ivtv. Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Add the calls needed to automatically merge subdev controls into a bridge control handler. Hook up the control framework in __video_ioctl2 and video_register_device. Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
Fixes 37 checkpatch.pl warnings like: WARNING: please, no space before tabs +^Icase V4L2_CID_MPEG_VIDEO_PULLDOWN: ^Ireturn "Video Pulldown";$ Signed-off-by: -
Hans Verkuil authored
To make it easier to determine whether all controls are added in v4l2-ctrls.c the case statements inside the switch are re-ordered to match the header. Signed-off-by:
-
Hans Verkuil authored
Add a new framework to handle controls which makes life for driver developers much easier. Note that this patch moves some of the control support that used to be in v4l2-common.c to v4l2-ctrls.c. The tables were copied unchanged. The body of v4l2_ctrl_query_fill() was copied to a new v4l2_ctrl_fill() function in v4l2-ctrls.c. This new function doesn't use the v4l2_queryctrl struct anymore, which makes it more general. The remainder of v4l2-ctrls.c is all new. Highlights include: - No need to implement VIDIOC_QUERYCTRL, QUERYMENU, S_CTRL, G_CTRL, S_EXT_CTRLS, G_EXT_CTRLS or TRY_EXT_CTRLS in either bridge drivers or subdevs. New wrapper functions are provided that can just be plugged in. Once everything has been converted these wrapper functions can be removed as well. - When subdevices are added their controls can be automatically merged with the bridge driver's controls. - Most drivers just need to implement s_ctrl to set the controls. The framework handles the locking and tries to be as 'atomic' as possible. - Ready for the subdev device nodes: the same mechanism applies to subdevs and their device nodes as well. Sub-device drivers can make controls local, preventing them from being merged with bridge drivers. - Takes care of backwards compatibility handling of VIDIOC_S_CTRL and VIDIOC_G_CTRL. Handling of V4L2_CID_PRIVATE_BASE is fully transparent. CTRL_CLASS controls are automatically added. Signed-off-by:
-
Pawel Osciak authored
Signed-off-by:
Pawel Osciak <p.osciak@samsung.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by:
-
Michael Grzeschik authored
Moved mt9m111_init after the chip version detection passage: I don't like the idea of writing on a device we haven't identified yet. Signed-off-by:
Philipp Wiesner <p.wiesner@phytec.de> Signed-off-by:
Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by:
Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by:
-
Philipp Wiesner authored
Added this info to Kconfig and mt9m111.c, some comment cleanup, replaced 'mt9m11x'-statements by clarifications or driver name. Driver is fully compatible to mt9m131 which has only additional functions compared to mt9m111. Those aren't used anyway at the moment. Signed-off-by:
-
Michael Grzeschik authored
Signed-off-by:
-
Michael Grzeschik authored
The emma uses bufnum 1 and 0. This patch tells the bufqueue to change the next buffer to the next one and not the current one. Otherwise the BUG_ON above will trigger everytime. Signed-off-by:
-
Guennadi Liakhovetski authored
Tuner, DVB frontend and video helper chip drivers are by default autoselected by their respective host cards, this, however, doesn't make much sense on SoC-based systems. Disable autoselection on EMBEDDED systems. Signed-off-by:
-
Guennadi Liakhovetski authored
There is no sense in trying to set cropping if we cannot get current one from the host driver. Signed-off-by:
-
Jean-François Moine authored
The exchanges for sensor mt9v111 are different with bridges zc301 and zc303. The exchanges for the bridge zc303 were those of the bad named tas5130ck. These mt9v111 exchanges have been adjusted from the ms-Windows public files vm30x.inf (for 0ac8:301b) and usbvm303.inf (for 0ac8:303b). Signed-off-by:
Jean-François Moine <moinejf@free.fr> Signed-off-by:
-
Jean-François Moine authored
The new exchanges are extracted from the public file lPEPI264v.inf of the ms-Windows driver. In this file, the sensor is named hv7131b but the exchanges are those of the hv7131r. Signed-off-by:
-
Jean-François Moine authored
Signed-off-by:
-
Jean-François Moine authored
Signed-off-by:
-
Jean-François Moine authored
Signed-off-by:
-
Jean-François Moine authored
- use an enum to define the sensor numbers - use the sensor numbers to index the associated tables - rename TAS5130CXX to TAS5130C - rename HV7131C to HV7131R - change some comments Signed-off-by:
-
Jean-François Moine authored
Some webcams as ov511 may find many times an end of image. In this case, with the last patch in image concatenation (commit 799b1bd41f398054d46fd35f73abd01c4009f6ca), the image pointer was NULL and the system crashed in memcpy(). Signed-off-by:
-
Sylwester Nawrocki authored
This driver exports a video device node per each camera interface/ video postprocessor (FIMC) device contained in Samsung S5P SoC series. The driver is based on v4l2-mem2mem framework. Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
-
Laurent Pinchart authored
The camera requires the STREAM_NO_FID quirk. Add a corresponding entry in the device IDs list. Signed-off-by:
-
Laurent Pinchart authored
Corrupted video frames are dropped by default by the driver for uncompressed formats. Data corruption is not less problematic for compressed formats, so frame drop should be enabled by default for those formats as well. Mark buffers as faulty when an isochronous packet loss is detected for any format, or when the buffer length doesn't match the image size for uncompressed formats. Drop erroneous buffers regardless of whether the format is compressed or uncompressed. Signed-off-by:
-
Andy Walls authored
This patch adds a defintion for the "Print" button found on HP OEM versions of the MCE remote. All of the other keys found on the HP OEM version of the remote match the other keys as already defined. Because, who doesn't need "remote printing", while one is sitting on the couch across from one's PC? ;) Signed-off-by:
Andy Walls <awalls@md.metrocast.net> Acked-by:
Jarod Wilson <jarod@redhat.com> Signed-off-by:
-
Maxim Levitsky authored
Signed-off-by:
Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by:
-
Maxim Levitsky authored
Add latest unported version of this driver to media/IR. Next patch will port it to ir core. Signed-off-by:
-
