- 31 Mar, 2009 13 commits
-
-
Bartlomiej Zolnierkiewicz authored
* Move cdrom_end_request() calls from cdrom_start_rw() and ide_cd_prepare_rw_request() to ide_cd_do_request(). * Unify ide_cd_do_request() exit paths. There should be no functional changes caused by this patch. Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by:Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Bartlomiej Zolnierkiewicz authored
There should be no functional changes caused by this patch. Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: -
Bartlomiej Zolnierkiewicz authored
ide-scsi is gone... Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: -
Bartlomiej Zolnierkiewicz authored
It makes no sense to check for BSY bit being set as earlier OK_STAT() check in cdrom_end_request() makes sure that BSY bit is cleared. There should be no functional changes caused by this patch. Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: -
Bartlomiej Zolnierkiewicz authored
There should be no functional changes caused by this patch. Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: -
Bartlomiej Zolnierkiewicz authored
Use ide_end_rq() also for failed non-fs requests on completion of REQUEST SENSE requests + use blk_rq_bytes() while at it. Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: -
Bartlomiej Zolnierkiewicz authored
Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: -
Bartlomiej Zolnierkiewicz authored
Use PageHighMem() instead of ifdefs in ide_pio_bytes() (=> local IRQs won't be disabled when not necessary). Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: -
Bartlomiej Zolnierkiewicz authored
Add support for arbitrary transfer lengths to ide_pio_bytes() and then inline ide_pio_multi() into ide_pio_datablock(). There should be no functional changes caused by this patch. Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: -
Borislav Petkov authored
Apparently¹, some ATAPI devices want to see the packet command first before enabling DMA otherwise they simply hang indefinitely. Reorder the two steps and start DMA only after having issued the command first. [1] http://marc.info/?l=linux-kernel&m=123835520317235&w=2Signed-off-by:
Borislav Petkov <petkovbb@gmail.com> Reported-by:
Michael Roth <mroth@nessie.de> Signed-off-by:
-
Bartlomiej Zolnierkiewicz authored
Fix some incorrect IDE_FTFLAG_* changes which slipped in commit "ide: add "flagged" taskfile flags to struct ide_taskfile (v2)" (commit 19710d25) few days ago. Signed-off-by:
-
Geert Uytterhoeven authored
On m68k: | drivers/ide/ide-atapi.c: In function 'ide_io_buffers': | drivers/ide/ide-atapi.c:87: error: implicit declaration of function 'sg_page' | drivers/ide/ide-atapi.c:87: warning: passing argument 1 of 'PageHighMem' makes pointer from integer without a cast | drivers/ide/ide-atapi.c:91: warning: passing argument 1 of 'kmap_atomic' makes pointer from integer without a cast | drivers/ide/ide-atapi.c:96: error: implicit declaration of function 'sg_virt' | drivers/ide/ide-atapi.c:96: warning: assignment makes pointer from integer without a cast | drivers/ide/ide-atapi.c:107: error: implicit declaration of function 'sg_next' | drivers/ide/ide-atapi.c:107: warning: assignment makes pointer from integer without a cast [bart: Dmitri Vorobiev submitted similar patch fixing MIPS] Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Cc: Dmitri Vorobiev <dmitri.vorobiev@movial.com> Signed-off-by:
-
Elias Oltmanns authored
Unfortunately, I missed a catch when reviewing the patch committed as 201bffa4. Here is the fix to the currently broken handling of sleeping devices. In particular, this is required to get the disk shock protection code working again. Reported-by:
Christian Thaeter <ct@pipapo.org> Cc: stable@kernel.org Signed-off-by:
Elias Oltmanns <eo@nebensachen.de> Signed-off-by:
-
- 30 Mar, 2009 27 commits
-
-
Linus Torvalds authored
* reiserfs-updates: (35 commits) reiserfs: rename [cn]_* variables reiserfs: rename p_._ variables reiserfs: rename p_s_tb to tb reiserfs: rename p_s_inode to inode reiserfs: rename p_s_bh to bh reiserfs: rename p_s_sb to sb reiserfs: strip trailing whitespace reiserfs: cleanup path functions reiserfs: factor out buffer_info initialization reiserfs: add atomic addition of selinux attributes during inode creation reiserfs: use generic readdir for operations across all xattrs reiserfs: journaled xattrs reiserfs: use generic xattr handlers reiserfs: remove i_has_xattr_dir reiserfs: make per-inode xattr locking more fine grained reiserfs: eliminate per-super xattr lock reiserfs: simplify xattr internal file lookups/opens reiserfs: Clean up xattrs when REISERFS_FS_XATTR is unset reiserfs: remove IS_PRIVATE helpers reiserfs: remove link detection code ... Fixed up conflicts manually due to: - quota name cleanups vs variable naming changes: fs/reiserfs/inode.c fs/reiserfs/namei.c fs/reiserfs/stree.c fs/reiserfs/xattr.c - exported include header cleanups include/linux/reiserfs_fs.h -
Jeff Mahoney authored
This patch renames n_, c_, etc variables to something more sane. This is the sixth in a series of patches to rip out some of the awful variable naming in reiserfs. Signed-off-by:
Jeff Mahoney <jeffm@suse.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Jeff Mahoney authored
This patch is a simple s/p_._//g to the reiserfs code. This is the fifth in a series of patches to rip out some of the awful variable naming in reiserfs. Signed-off-by:
-
Jeff Mahoney authored
This patch is a simple s/p_s_tb/tb/g to the reiserfs code. This is the fourth in a series of patches to rip out some of the awful variable naming in reiserfs. Signed-off-by:
-
Jeff Mahoney authored
This patch is a simple s/p_s_inode/inode/g to the reiserfs code. This is the third in a series of patches to rip out some of the awful variable naming in reiserfs. Signed-off-by:
-
Jeff Mahoney authored
This patch is a simple s/p_s_bh/bh/g to the reiserfs code. This is the second in a series of patches to rip out some of the awful variable naming in reiserfs. Signed-off-by:
-
Jeff Mahoney authored
This patch is a simple s/p_s_sb/sb/g to the reiserfs code. This is the first in a series of patches to rip out some of the awful variable naming in reiserfs. Signed-off-by:
-
Jeff Mahoney authored
This patch strips trailing whitespace from the reiserfs code. Signed-off-by:
-
Jeff Mahoney authored
This patch cleans up some redundancies in the reiserfs tree path code. decrement_bcount() is essentially the same function as brelse(), so we use that instead. decrement_counters_in_path() is exactly the same function as pathrelse(), so we kill that and use pathrelse() instead. There's also a bit of cleanup that makes the code a bit more readable. Signed-off-by:
-
Jeff Mahoney authored
This is the first in a series of patches to make balance_leaf() not quite so insane. This patch factors out the open coded initializations of buffer_info structures and defines a few initializers for the 4 cases they're used. Signed-off-by:
-
Jeff Mahoney authored
Some time ago, some changes were made to make security inode attributes be atomically written during inode creation. ReiserFS fell behind in this area, but with the reworking of the xattr code, it's now fairly easy to add. The following patch adds the ability for security attributes to be added automatically during inode creation. Signed-off-by:
-
Jeff Mahoney authored
The current reiserfs xattr implementation open codes reiserfs_readdir and frees the path before calling the filldir function. Typically, the filldir function is something that modifies the file system, such as a chown or an inode deletion that also require reading of an inode associated with each direntry. Since the file system is modified, the path retained becomes invalid for the next run. In addition, it runs backwards in attempt to minimize activity. This is clearly suboptimal from a code cleanliness perspective as well as performance-wise. This patch implements a generic reiserfs_for_each_xattr that uses the generic readdir and a specific filldir routine that simply populates an array of dentries and then performs a specific operation on them. When all files have been operated on, it then calls the operation on the directory itself. The result is a noticable code reduction and better performance. Signed-off-by:
-
Jeff Mahoney authored
Deadlocks are possible in the xattr code between the journal lock and the xattr sems. This patch implements journalling for xattr operations. The benefit is twofold: * It gets rid of the deadlock possibility by always ensuring that xattr write operations are initiated inside a transaction. * It corrects the problem where xattr backing files aren't considered any differently than normal files, despite the fact they are metadata. I discussed the added journal load with Chris Mason, and we decided that since xattrs (versus other journal activity) is fairly rare, the introduction of larger transactions to support journaled xattrs wouldn't be too big a deal. Signed-off-by:
-
Jeff Mahoney authored
Christoph Hellwig had asked me quite some time ago to port the reiserfs xattrs to the generic xattr interface. This patch replaces the reiserfs-specific xattr handling code with the generic struct xattr_handler. However, since reiserfs doesn't split the prefix and name when accessing xattrs, it can't leverage generic_{set,get,list,remove}xattr without needlessly reconstructing the name on the back end. Update 7/26/07: Added missing dput() to deletion path. Update 8/30/07: Added missing mark_inode_dirty when i_mode is used to represent an ACL and no previous ACL existed. Signed-off-by: -
Jeff Mahoney authored
With the changes to xattr root locking, the i_has_xattr_dir flag is no longer needed. This patch removes it. Signed-off-by:
-
Jeff Mahoney authored
The per-inode locking can be made more fine-grained to surround just the interaction with the filesystem itself. This really only applies to protecting reads during a write, since concurrent writes are barred with inode->i_mutex at the vfs level. Signed-off-by:
-
Jeff Mahoney authored
With the switch to using inode->i_mutex locking during lookups/creation in the xattr root, the per-super xattr lock is no longer needed. This patch removes it. Signed-off-by:
-
Jeff Mahoney authored
The xattr file open/lookup code is needlessly complex. We can use vfs-level operations to perform the same work, and also simplify the locking constraints. The locking advantages will be exploited in future patches. Signed-off-by:
-
Jeff Mahoney authored
The current reiserfs xattr implementation will not clean up old xattr files if files are deleted when REISERFS_FS_XATTR is unset. This results in inaccessible lost files, wasting space. This patch compiles in basic xattr knowledge, such as how to delete them and change ownership for quota tracking. If the file system has never used xattrs, then the operation is quite fast: it returns immediately when it sees there is no .reiserfs_priv directory. Signed-off-by:
-
Jeff Mahoney authored
There are a number of helper functions for marking a reiserfs inode private that were leftover from reiserfs did its own thing wrt to private inodes. S_PRIVATE has been in the kernel for some time, so this patch removes the helpers and uses IS_PRIVATE instead. Signed-off-by:
-
Jeff Mahoney authored
Early in the reiserfs xattr development, there was a plan to use hardlinks to save disk space for identical xattrs. That code never materialized and isn't going to, so this patch removes the detection code. Signed-off-by:
-
Jeff Mahoney authored
This patch changes reiserfs_get_page to take an offset rather than an index since no callers calculate the index differently. Signed-off-by:
-
Jeff Mahoney authored
This patch removes the xinode and mapping variables from reiserfs_xattr_{get,set}. Signed-off-by: -
Jeff Mahoney authored
This patch makes many paths that are currently using warnings to handle the error. Signed-off-by:
-
Jeff Mahoney authored
Although reiserfs can currently handle severe errors such as journal failure, it cannot handle less severe errors like metadata i/o failure. The following patch adds a reiserfs_error() function akin to the one in ext3. Subsequent patches will use this new error handler to handle errors more gracefully in general. Signed-off-by:
-
Jeff Mahoney authored
This patch kills off reiserfs_journal_abort as it is never called, and combines __reiserfs_journal_abort_{soft,hard} into one function called reiserfs_abort_journal, which performs the same work. It is silent as opposed to the old version, since the message was always issued after a regular 'abort' message. Signed-off-by: -
Jeff Mahoney authored
ReiserFS panics can be somewhat inconsistent. In some cases: * a unique identifier may be associated with it * the function name may be included * the device may be printed separately This patch aims to make warnings more consistent. reiserfs_warning() prints the device name, so printing it a second time is not required. The function name for a warning is always helpful in debugging, so it is now automatically inserted into the output. Hans has stated that every warning should have a unique identifier. Some cases lack them, others really shouldn't have them. reiserfs_warning() now expects an id associated with each message. In the rare case where one isn't needed, "" will suffice. Signed-off-by:
-
