Rename the local variables to the comedi "norm".

The comedi_subdevice in this function is actually the dev->write_subdev
that was initialized in the attach. Use that instead of accessing the
dev->subdevices array directly.

Use dev->class_dev as the device for all dev_printk() messages.

Instead of using the 'comedidev' back pointer in the private data, use
the comedi_device 'dev' that we already have.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename the local variables to the comedi "norm".

The comedi_subdevice in this function is actually the dev->read_subdev
that was initialized in the attach. Use that instead of accessing the
dev->subdevices array directly.

Use dev->class_dev as the device for all dev_printk() messages.

Instead of using the 'comedidev' back pointer in the private data, use
the comedi_device 'dev' that we already have.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This function is only called by usbdux_auto_attach(), absorb it.

Also, there is no reason to down/up the semaphore during the attach.
None of the subdevices are functioning yet so there are no commands
being sent to the usb device.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename the local variable used for the device private data.

Move the setting of the device private data 'comedidev' to the
(*auto_attach) where the other back pointers are set.

Tidy up the subdevice init by removing the unnecessary comments
and adding some whitespace.

Remove the unnecessary dev_info() after a sucessful attach.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This define enables printing of the 'dux_commands' that is sent to
the usb device in send_dux_commands(). This type of development
debug should not be left in the final driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The tidy_up() function is only called by the (*detach). That function
unlinks any running urbs and frees all the allocated urbs and buffers
used by the driver.

Rename tidy_up() to usbdux_free_usb_buffers() and move all the parts
that don't deal with the freeing of the buffers directly into the
(*detach).

Also, remove all the unnecessary clearing of the pointers. The comedi
core will kfree() the private data after calling the (*detach).

Foe aesthetic reasons, do the kfree()'ing of the buffers and urbs in
the reverse order that they were allocated.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

If the comedi_driver (*auto_attach) fails, the comedi core will call
the (*detach) function to do any cleanup. It's not necessary to do
the cleanup in the (*auto_attach).
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The usb_driver (*probe) calls comedi_usb_auto_config() after finding a
free slot for the static private data and doind some initial allocation
and setup. The comedi_usb_auto_config() will then call the comedi_driver
(*auto_attach).

Move all the probe/auto_attach into the comedi_driver and just have the
usb_driver call comedi_usb_auto_config(). This allows the comedi_driver
to allocate the private data and removes the need for the static array
and the semaphore that protects it.

Since all the probe/auto_attach is now handled by the comedi_driver, we
can also remove the 'attached' and 'probed' information from the private
data. The subdevice functions will only be hooked up if the usb device
has been probed and the comedi device is attached.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The usb_driver (*disconnect) calls comedi_usb_auto_unconfig() which will
call the comedi_driver (*detach). Just move all the disconnect/detach
into the comedi_driver and use comedi_usb_auto_unconfig() directly for
the (*disconnect).
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Move all the usb buffer allocation code in the usb_driver (*probe)
into a new function, usbdux_alloc_usb_buffers(). This allows tidying
up the error path in the (*probe).
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use a pointer to the struct usbdux_private data being configured
in the probe. Also use a pointer to the struct urb being setup in
the buffer allocations.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The dev_dbg() during the usb_driver (*probe) is just added noise.

The dev_err() when a usb_alloc_urb() fails is not necessary. The
allocation failure will have already output a message.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This struct is the comedi_device private data. For aesthetic reasons,
rename it to usbdux_private.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

version.h header inclusion is not necessary as detected by
versioncheck.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

version.h header inclusion is not necessary as detected by
versioncheck.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

version.h header inclusion is not necessary as detected by
versioncheck.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

version.h header inclusion is not necessary as detected by
versioncheck.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

version.h header inclusion is not necessary as detected by
versioncheck.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

version.h header inclusion is not necessary as detected by
versioncheck.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

version.h header inclusion is not necessary as detected by
versioncheck.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add BLOCK depends in Kconfig for LUSTRE to fix this:
drivers/staging/lustre/lustre/fid/../include/linux/lustre_compat25.h:117:2:
error: implicit declaration of function ‘unregister_blkdev’
Signed-off-by: Xiong Zhou <jencce.kernel@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Removed the header file included twice.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Removed the header file included twice.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Removed the header file included twice.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Removed the header file included twice.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Removed the header file included twice.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Removed the header files included twice.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Removed the header files included twice.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Removed the header files included twice.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Removed the header files included twice.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Removed the header files included twice.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Removed the header files included twice.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Removed the header files included twice.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Removed the header files included twice.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Removed the header file included twice.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Removed the header files included twice.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Removed the header files included twice.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This isn't needed, userspace can trigger off of the device id if they
need to do something "special" for different devices in special modes
depending on the device's endian issues.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Won Kang <wonkang@gctsemi.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There are global symbols here that conflict with the rest of the kernel,
preventing it from being built, so do not allow this module to be built
in.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Won Kang <wonkang@gctsemi.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Make the logging prefixes match the module names
by adding #define pr_fmt(fmt) KBUILD_MODNAME and
converting printks to netdev_<level> when a
struct netdevice * is available and and pr_<level>
when not.

Remove embedded prefixes.
Add missing terminating newlines.
Remove an unnecessary rx-dropped message.
Remove an unnecessary temporary variable.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>